J&K

Active

Works

Civil Works

Wood work of Doors windows and other allied works of Community Hall Chakroi Lower panchayat Chakroi Lower Block Suchetgarh under SSY for the year 2026-27(BLOCK LEVEL)

Rural Development and Panchayati Raj

Executive Engineer REW Jammu | Jammu, Jammu And Kashmir

Amount: ₹3.4 LCloses: 28 Sept 2026Due tomorrow

Timeline

Published22 Sept 2026
Closes28 Sept 2026
Bid Opening29 Sept 2026

Tender Value

₹3.4 L

EMD Value

₹6,800

Closing Date

28 Sept 2026, 6:00 pmDue tomorrow

Tender Inviting Organisation

Name

Executive Engineer REW Jammu

Address

Executive Engineer REW Jammu

Work Description

Wood work of Doors windows and other allied works of Community Hall Chakroi Lower panchayat Chakroi Lower Block Suchetgarh under SSY for the year 2026-27(BLOCK LEVEL)

Tender Information

Tender ID

2026_RDPR_325634_13

Reference Number

e-NIT No.629 REWJ of 2026-27 dated 22-09-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

Executive Engineer REW Jammu

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Tender fee and all bid documents as per Enit (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

MH0515

EMD Fee Amount

₹6,800

Important Dates

Last Activity

22 Sept 2026

Published

22 Sept 2026

Bid Opening

29 Sept 2026

Download Starts

22 Sept 2026

Download Ends

28 Sept 2026

Submission Starts

22 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (23 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.	55.58	Sqm	38.9	₹2,162.06
2	12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)	44.82	sqm	266.2	₹11,931.08
3	Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Deodar wood 30 mm thick	11.75	Sqm	4,031.75	₹47,373.06
4	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Deodar wood 30 mm thick	11.75	Sqm	3,788.5	₹44,514.88
5	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm	1.95	Sqm	3,234.2	₹6,306.69
6	Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes	8.16	sqm	1,070.2	₹8,732.83
7	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class deodar wood 50x12mm	59.34	Rm	193.75	₹11,497.13
8	Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm	30	each	63.35	₹1,900.5
9	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm	15	each	68	₹1,020
10	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc.complete :300x16 mm	1	each	298.75	₹298.75

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.47 MB

Work Item Documents

BOQ_1100968.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

55.58

Sqm

38.9

₹2,162.06

12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

44.82

sqm

266.2

₹11,931.08

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Deodar wood 30 mm thick

11.75

Sqm

4,031.75

₹47,373.06

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Deodar wood 30 mm thick

11.75

Sqm

3,788.5

₹44,514.88

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm

1.95

Sqm

3,234.2

₹6,306.69

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes

8.16

sqm

1,070.2

₹8,732.83

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class deodar wood 50x12mm

59.34

193.75

₹11,497.13

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

each

63.35

₹1,900.5

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm

each

₹1,020

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc.complete :300x16 mm

each

298.75

₹298.75