Repairs to joinery sanitary fittings and misc B/R works to OTM and MD Accn at Jindrah

Amount

Taking down shutters of any description area exceeding 1.0 sqm & not exceeding 2 sqm each complete all as specified and directed.

Taking down old chowkats or frames with shutters of any description (without taking off shutters from the frame) area not exceeding 1.5 sqm removing materials from site of work complete all as specified and directed.

Taking down old chowkats or frames with shutters of any description (without taking off shutters from the frame ) area exceeding 1.5 sqm but not exeeding 4.0 sqm removing materials from site of work complete all as specified and directed.

Taking down and refixing of chowkats or frames of any description with shutters (without taking off shutters from the frame ) area not exceeding 1.5 sqm each in the same opening complete all as specified and directed.

S&F mild steel pressed steel frames for doors of size 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete including providing and filling hollow of frame with plain cement concrete type C0 1:3:6 (using 12.5mm graded crushed stone aggregates) complete all as specified and directed.

S&F 35 mm thick factory made plain framed, panelled shutter as per IS 1003 (Part-I) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered faced particle board with commercial veneering on both faces, stiles and rails shall be of 2nd class hard wood, vaccum pressure treated with antifungal and antitermite preservation as per IS complete all as specified and directed.

S&F 35mm thick well seasoned second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass/gauge without sash bars edge of framing plain chamfered or round, fitted with cut and mitred beads for securing glass gauge etc vaccum pressure treated provided with styles and rails etc size of member of shutters with antifungal and antitermite preservation as per IS as specified in SSR part-I Sec-8 clause 8.24(a) fitted to chawkats complete all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, Supply & Fixing in opening as per specificationcomplete all as specified and directed.

M&L for treating small articles such as stops, covers, hold fast etc, area not exceeding 0.1 sqm each and treated with tar, coal tar or black paint complete all as specified and directed.

M&L PCC 1:3:6 type C-1, using 20mm graded stone aggregates as in hold fasts, cills, steps, plinth courses, apex stones , bed plates and like incl weathering, slightly rounded or chamfered angles and throating, including necessary form work fair finished of exposed surfaces of concrete and making good with existing surfaces complete all as specified and directed.

S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay with glazing bars, devetailed or welded complete all as specified and directed.

All as per srl item No 12 here -in-before but without glazing bars complete all as specified and directed.

S&F factory made steel ventilators with top hung shutter including hinges, steel peg stay,with glazing pin headed type complete all as specified and directed.

S&F framed work such as grill, gratings etc with ends of bars shoulded and /or riveted, or forged into spikes , framed guard bars barred iron doors, ladders, framed blusteres, walkways, railings, frame work of water tanks and similar works confirming to Fe 290 Gde E-165 complete all as specified and directed.

Hacking out old broken glass (any thickness, size , quality, description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass panes, ordinary quality not exceeding 0.5 sqm each fixed to steel frame complete with oil putty in squares including steel pins complete all as specified and directed.

All as per srl item No 17 here -in-before but except sheet glass complete all as specified and directed.

All as per srl item No 17 here - in- before but 4mm thick figured glass pin headed type not exceeding 0.5 sqm each fixed to steel frame complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm & fixed with cover fillets complete all as specified and directed.

S&F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm & fixed with cover fillets complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (1st grade) over a coat of pink primer over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

S&F 150mm long aluminium handles, cast type,anodised complete all as specified and directed.

All as per srl item No 24 here -in-before but 100 mm long complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

All as per srl item No 26 here -in-before but 100 mm long complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding bolt with hasp & staples (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed.

S&F 100mm long butt hinge, medium weight, cold rolled mild steel ISI marked complete all as specified and directed.

All as per srl item No 29 here -in-before but 75 mm long complete all as specified and directed.

M&L cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 250 & not exc 500 ltrs complete all as specified and directed.

M&L cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 & not exc 1000 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 500 ltrs capacity double layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I includind dismantling of existing water tank complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 1000 ltrs capacity double layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I includind dismantling of existing water tank complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of bore of dia of pipe 20mm (Min wt 210gm) complete all as specified and directed.

S&F in repairs 15mm bore bib taps chromium plated fancy type with wall flanges screwed down, screwed for iron pipe or brass ferrule etc, complete all as specified and directed.

S&F in repairs 15mm bore stop cocks, chromium plated reduce body, long shunk, cap (conceal type) screwed down,high pressure screwed both ends for iron pipe or for union etc as in repair complete all as specified and directed. (Make: Continental series of Jaquar or equivalent model of MARC/ESSCO)

S&F in repairs 15mm bore pillar tap cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shank and fly nuts, screwed for iron pipes complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 in two layers using WPC as per manufacturer's instructions on finishing layer of rendering on brick or concrete surfaces, finished even and smooth including taking down old cement plaster of any description complete all as specified and directed. (Note: WPC shall be measured and paid separately under appropriate item as supply only)

M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick or concrete surfaces of internal walls finished even and smooth without using extra cement including taking down old cement plaster of any description complete all as specified and directed.

Supply only integral water proofing compond of approved brand complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface as in ceiling/chajja and RCC surfaces including taking down old cement plaster of any description complete all as specified and directed.

M&L for applying three coats of white wash including preparation of new or previously untreated surfaces of ceiling complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of primer including thin layer of chalk whitining and making the wall surfaces smooth complete all as specified and directed.

M&L two coats of cement base paint on newly plastered wall surfaces of any description including preparation of surfaces, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 75mm thick PCC 1:5:10, type E2 using 40mm grade stone aggregates finishing the fair and even without using extra cement complete all as specified and directed.

M&L for glazed ceramic tiles coloured (300 x 200 mm), 6 to 7mm thick on vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10 mm thick in cement mortar 1:3, as in backing layer complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.06sqm but not exc. 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface over and including screed bedding layer 20mm thick in cement mortar 1:6 finished even and rough complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F for vitrified ceramic tiles in light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in whitle or coloured cement to match the surfaces over and including screed bedding layer 20mm thick in cement mortar 1:6 finished even and rough complete all as specified and directed.

S&F for vitrified ceramic tiles in light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10 mm thick in cement mortar 1:3, as in backing layer complete all as specified and directed.

M&L 20mm thick granite work (table rubbed and polished). In steps, jambs, pillars, cooking paltform and like in cement mortar 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

M&L for glazed ceramic tiles coloured (300 x 450 mm), 7mm thick on vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10 mm thick in cement mortar 1:3, as in backing layer complete all as specified and directed.

M&L machine cut kota stone slab 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 20mm thick screed bedding layer in cement mortar 1:4, for laying floor finishes complete all as specified and directed.

M&L marble work (makrana white) 18-20mm thick (table rubbed and polished) as in border (strip 100-150mm wide) set in cement mortar 1:4 over and including 20mm thick screed bedding layer in cement mortar 1:4, for laying floor finishes complete all as specified and directed.

M&L for machine cut kota slab 18-20mm thick in riser of steps, skirting, dado and pillars laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

S&F 20mm bore GI pipe medium grade galvanised with all fittings fixed to walls, laid in floors and ceilings etc including taking up or down old steel tubing and connections complete all as specified and directed.

S&F 15mm bore GI pipe medium grade galvanised with all fittings fixed to walls, laid in floors and ceilings etc including taking up or down old steel tubing and connections complete all as specified and directed.

S&F in repairs of PVC low level flushing cistern, 10 Ltr capacity, syphonic action type white body with inlet ball valve, float, handle, bracket, flush pipe etc complete & connecting to WC complete all as specified and directed. (Make: Sleek of Hindware, Slimline of Parryware or equivalent model of Cera)

S&F in repairs vitreous china squatting pan “ Orissa pattern” of size 580 x440mm white with integral foot rest 1st quality with 100mm dia ‘P’ or ‘S’ trap ,ISI marked including provision of lime concrete bedding excluding flush pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs 100mm bore floor traps 'P' or 'S' type complete all as specified and directed.

S&F in repairs viterous china Urinal bowl (white) flat back size of 465x355x265mm including fixing plug, discharge pipe, brackets, flush pipe etc, fixed to walls complete all as specified and directed.

S&F in repairs of CP shower rose 125mm size of approved quality complete all as specified and directed.

S&F in repairs brass CP towel Rail 20mm dia, D type, 60cm long between flanges etc, complete all as specified and directed.

S&F in repairs of sheet glass shelf assembly conisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and directed.

S&F in repairs wash hand basin vitreous china, flat back of size 550mmx 400mm 1st grade quality of approved brand with PVC waste pipe 32mm dia of suitable length and waste fittings 32mm dia brass, chromium plated etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end complete all as specified and directed. (Make: Parryware Code No:- 0471, Indus Basin (white) or equivalent model of hindware, Cera)

M&L PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed.

S&F in repairs vitreous china wash basin white, flat back, size 400 x 400 including, waste coupling brass, waste pipe, chain and plug and porcelain stopper brackets fixed in repairs complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel approved quality 1 mm thick kitchen or laboratory with plugs washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mm x 330mm x 160mm complete including 40mm dia PVC waste pipe and PVC connection pipe 450mm long complete all as specified and directed.

S&F grating doom 100mm dia of PTMT (min wt 25 gm) fixed in repairs complete all as specified and directed.

S&F grating doom 125mm dia with hole of PTMT (min wt 40 gm) fixed in repairs complete all as specified and directed.

S&F in repairs harrison rails (curtain rod) mild steel chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F PVC connections pipe 15mm with PTMT nuts of length 450mm in repairs complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe for WHB complete all as specified and directed.

S&F in repairs 40mm dia PVC waste pipe for kitchen sink complete all as specified and directed.

S&F in repairs waste coupling, 32mm dia, CP for WHB, with long screwed shank and fly nuts, flange end beded in red lead cement and other end fixed complete all as specified and directed.

All as per srl item No 80 here -in-before but 40mm dia for sink complete all as specified and directed.

Supply only flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size not less than 24"x31"x10", 0.63mm thick with adequate shelves complete all as specified and directed.

S&F vitreous china wash down two piece water closet pan (pedesal pattern) incl soft close seat cover and twin flush fittings incl complete fixing accessories in repairs complete all as specified and directed. Make: Cera Model No. 3128, 3225, 3325 & 3425.

S&F viterous china one piece wash basin with integrated half pedestal white, size 550x485 including complete fixing accessories fixed in repairs complete all as specified and directed. Make : Cera, Model No. 1085

S&F in repairs brass chromium plated mixer 15mm for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed.

Rakesh Kumar Malia

MandeepConstructionCo

NARESH KUMAR KHAJURIA

M/S SANJAY STEEL WORKS