Construction of Community Hall cum Work Shed at Mauja Chainpur , Thana no.- 186, Khata no. - 369,435 Survey no. - 1787,1788 at Chainpur panchayat under Block : Taraiya (Saran).

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

All kinds of soil.

Earth work in excavation in foundtion trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead.

Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Extra for providing and mixing water profing material in cement concrete work in the proportion recommended by the manufacturers. Detail of Coast for per bag of 50 kg of cement.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring ,shuttering ,finishing and reinforcement-All work upto plinth level

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

1:2:4(1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishing and reinforcement.

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shutering and de centring at all levels over a height of 3.5 m ,for every additional height of 1 metre or part thereof (Plan area to be measured)

Suspended floors, roots, laning, beams and balconies (Plan area to be measured)

Providing and laying in position machine batched and mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved desing mix, Including pumping of concrete to site for laying but excluding the cost of centering, shuttering, finishing an including retard setting of concrete, Improve workability withoutt impairing strength and admixtures in recommended proportions as per IS:9103 to accelerate, reinforcement, durability as per direction of Engineer-incharge, Note:- Cement content considered in this item is @ 330kg/cum, Excess or less cement used as per design mix is payable or recoverable separetely.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Brick work with bricks of class designation 100A in foundation and plinth in:

Providign 100A B/W(1:4) in superstructure etc. all complete job.

Cement mortar 1:6(1 cement:6 coarse sand)

Extra for Brick work in superstructure above plinth level upto floor V Level

Brick work 7cm thick with F.P.S brick of class designation 100A in cement mortar 1:3(1 cement: 3 coarse sand) in superstructure.

Half brick masonry with bricks of class designation 100A in foundations and plinth in :

Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry (with F.P.S bricks)

Extra for half Brick masonry in superstructure above pinth level upto floor V level.

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete.

Fixed to steel window by welding

Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing 1 mm thicks M.S sheet door with frame of 40x40x6mm angal iron and 3mm M.S gusset plates at the junction and corners. All necessary fittings completejncluding applying a priming coat of approved primer using flats 30x6mm for diagonal braces and central cross piece.

providing and fixing T-iron frames for doors . Window and ventilation of mils steel tee -sections , joints miltred and welded with 15x4 mm luge 10cm long embedded in cement cocerete block 15x10x10cm of 1:3:6(1 cement:3 coarse sand :6 graded stone aggregate 20mm nominal size) or with woodden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

Fixed to steel windows by welding

Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one ;pcf at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying apriming coat of approved steel primer

G.I pipes 40mm nominal bore(class B)

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement

18 mm thick

Providing and fixing glass strips in joints of terrazo/cement concrete floors.

40 mm wide and 4 mm thick

Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brow laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing average 150mm thick dry rammed khoa beaten to 112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1: 10) all complete as per building specification and direction of E/l,

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

12mm cement plaster of mix:

1:6(1 cement: 6 coarse sand)

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

12 mm thick cement plaster with water proofing in cm (1:3) with neat cement punning…E/I. (over tarrece)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

6mm cement plaster to ceiling of mix:

1:4( 1 cement: 4 coarse sand)

12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement

63 mm size brick aggrigate outer side of soak pit

Distemper with 1st quality washable dimtemper. For New Work

New work (three or more coats)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

New work (three or more coats)

Applying priming coat:

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing soil,waste and vent pipes

100 mm dia

Sand cast iron S & S pipe as per IS:1729

Provding and fixing heel rest sanitary bend

100 mm dia

Sand cast iron S & S pipe as per IS:1729

Provding and fixing single equal plain junction of required degree with access door ,insertion rubber washer 3mm thick ,bolt and nuts complete

Sand cast iron S & S pipe as per IS:1729

Provding and fixing terminal guard

100 mm dia

Sand cast iron S & S pipe as per IS:1729

Providing and fixing on wall face unplasticised-PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion

110mm diameter

Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised PVC rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Coupler

110mm bend

Shoe (Plain)

110mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Excavating trenches of required width for pipes, cables etc including excavation for sockets and dressing of sides, ramming of bottoms depth upto 1.5m ,including getting out the excavated soil , and then returning the soil as required,in the layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming watering and desposing of surplus excavated soil as dirceted within a lead of 50m

pipes cables etc exceeding 80mm dia but not exceeding 300 mm dia

Providing and laying non -pressure NP2 class(light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete

150 mm dia R.C.C. pipe

Constructing brick masonary manhole in cement mortar 1:4 (1 cement, 4 coarse sand.) R.C.C. top slab with1:2:4 mix(1 cement, 2 coars e sand, 4 graded stone aggregate 20 mm nominal size) foundation cocrete 1:4:8 mix (1cement, 4 coarse sand, 8 graded stone aggregate 40 mm nominal size.) inside plastering 12 mm thick with cement mortar 1:3 (1 cement, 3 coarse sand.) finished with floating coat of neat cement and making channels in cement concrete 1:2:4. finished with floating coat of neat cement complete as per standard design.

Inside size 90x80cm and 45 cm deep including C.I. cover with frame ( light duty) 455x610 mm internal diamension tatal weight of cover and fram to be not less than 38 kg (weight of cover23 kg and weight of frame 15 kg )

With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W drain pipe 100 mm diameter and 1.20 m long complete as per standard desgin

India mark-II hand pump with all accessories including 8 nos (3 mtr lenhtg each ) connecting rod and one cylinder confirming IS:155000 ( part 1-8)/2008

125 mm dia U.P.V.C. casing pipe confirming to IS: 12818-1983/1992

32 mm dia medium quality G.I riser pipe and 8 nos 3 mtr length (3 mtr each length confirming IS : 1239

40 mm dia x 2 mtr long UPVC RIBBED strainer confirming to IS : 12818-1983/1992

125 mm dia x 40 mm x UPVC reducing socekt

40 mm nominal outer dia CPVC PIPE

supplying all materials labours and equipment for constructing platform with foot rest etc all complete jobs

Supplying drians 3 m as per design etc all complete job as per direction of E/I.

boaring by jet dheki by suitable cutter or reduces as the case may be lowering 125 mm UPVC x 40 mm dia G.I pipe & strainer or standsradd quality iron shoe plug & socket etc all complete including providing all tols and plants required for the job as per specification and direction of the engineer in charge

for 125 mm dia UPVC pipe

for 40 mm dia pipe from 30 mtr deep to 61 m

Supplying labours and equipment including 125 mm dia G.I cap & fitting and fixing over the TW properly and taking it out as per direction of E.I cap will be propert of the contractor 1No

Providing all labours for fiiting and fixing of india mark II hand pump including supplying all tools an plants required for the all jobs complete as per direction

supplying all tools equipment all labours for lowering 32 mm dia medium quality G.I pipe (riser pipe) in ddrilled TW in 3 mtr length

providing all labours for fitting and fixing of deep cylinder with the riser pipe including neceesary connecting and jointing materials chrom leather bucket all tools & plants required for the job low water level all complete job as per specification and direction of E/I

Suppliying all materials & labours for arrangement of addititonal water required during the drilling work all complete job as per specification and direction of E/I

development and t Testing of T/W till the discharge is free from sand one item all complete job as per specification and direction of E/I

Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with piano type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required. Group- B a. Light/ call bell points - 27 b. Ceiling fan points - 07 c. Ex. Fan points - 02 Total - 36

Supplying and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type on the existing switch box including connections etc. as required.

Supplying and fixing suitable size GI/PVC box on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type connection painting etc. as required.

Supplying and drawing low resistance co-axial T.V cable RJ-6 grade copper conductor PE insulated, with PVC sheath in the existing PVC concuit etc. as required.

Supplying and fixing piano type T.V antenna socket on the existing metal box including making connection, etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (Circuit wiiring)

4 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire

Supplying and fixing metal box of following size in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

75mmX75mmX60mm

Supplying and fixing 8 way double door sinle pole and Neutral sheet steel M.C.B. D.B, 240 Volts in recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection, phosphatized and powder painted including nting, earthing etc. as required ( But without MCB/ RCCB/Isolator)(UPS DB)

Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required .

6 Amp. To 32 Amp. SP MCB 240 Volt

32 Amp SPN MCB 240 Volt

Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/W in pressure die- cast aluminium housing and integreted electronic driver etc. directly on ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc. as required.

Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/ PVC box including connection etc as required.

Supplying and fixing batten / angle holder including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable etc. as required.

Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required.

Supplying and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM)minimum 4.00 including wiring the down rods of stanard length ( upto 30 cm) with 1.5 sq. mm FR PVC insulated insulated copper conductor etc as required.

Supply and Installation of 300 mm, 230 V A.C. exhaust fan in the existing opening, including making good the damage, including making good the damage, connection, testing, commissioning etc. as required.

Earthing with G.I earth pipe 4.5 mt. long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. including providing salt and charcoal for pipe earth electrode as required.

Providing and laying earth connections from earth electode with 4.00 mm. Dia copper wire in 15 mm. Dia G.I.pipe from earth electrode as required.

Providing and fixing 25mmX5mm GI strip on surface for connection etc as required.

Providing and fixing 4mm dia copper wire on surface or in recess for loop earthing etc as required.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Earth work in excavation in foundtion trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead.

Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:

1:2:4(1 Cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement:4 coarse sand: 8 graded stone aggregate 40mm nominal size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Extra for providing and mixing water profing material in cement concrete work in the proportion recommended by the manufacturers.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring ,shuttering ,finishing and reinforcement-All work upto plinth level

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishing and reinforcement.

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conrete work in beams, suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shutering and de centring at all levels over a height of 3.5 m ,for every additional height of 1 metre or part thereof (Plan area to be measured)

Suspended floors, roots, laning, beams and balconies (Plan area to be measured)

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Brick work with bricks of class designation 100A in foundation and plinth in:

Cement mortar 1:6(1 cement:6 coarse sand)

Extra for Brick work in superstructure above plinth level upto floor V Level

Brick work 7cm thick with cum brick of class designation 100A in cement mortar 1:3(1 cement: 3 coarse sand) in superstructure.

Half brick masonry with bricks of class designation 100A in foundations and plinth in :

Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for half Brick masonry in superstructure above pinth level upto floor V level.

Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry (with F.P.S bricks)

Providing and fixing T-iron frames etc

Providing and fixing 1 mm thick M.Sheet etc

P& F M.S grills etc

Providing and fixing circular/hexagonal or m.s sheet cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one look at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,etc

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying apriming coat of approved steel primer

G.I pipes 40mm nominal bore(class B)

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement

18 mm thick

Providing and fixing glass strips in joints of terrazo/cement concrete floors.

40 mm wide and 4 mm thick

Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades,such except White, Ivory, Grey, Fume Red Brow laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing average 150mm thick dry rammed khoa beaten to 112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1: 10) all complete as per building specification and direction of E/l,

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

12mm cement plaster of mix:

1:6(1 cement: 6 coarse sand)

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

6mm cement plaster to ceiling of mix:

1:4( 1 cement: 4 coarse sand)

12 mm C.P with punning

Distemper with 1st quality washable dimtemper. For New Work.

New work (three or more coats)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

New work (three or more coats)

Applying priming coat With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

12 mm thick cement plaster with water proofing in cm (1:3) with neat cement punning…E/I. (over tarrece)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Houlage with O.H & C.P

Lead on surface road

Lead on unsurface road

Lead on kuchcha road

P/V earth work excavation in foundation trench……as per E/I.

Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete.

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level

1:2:4(1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishing and reinforcement.

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conrete work in beams, suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for:

Centering&shuttering in foundation trench….

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Brick work with bricks of class designation 100A in foundation and plinth in:

Cement mortar 1:6(1 cement:6 coarse sand)

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete.

Fixed to openings / wooden frames with rawl plugs screws etc.

Steel work welded in built up sections/framed worK including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,etc

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

New work (three or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing earth work in excavation etc

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing P.C.C(1:2:4) in F&P ……do….do…..all complete job

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Providign 100A B/W(1:4) in superstructure etc. all complete job.

Providign 100A B/W(1:6) in superstructure etc. all complete job.

P/V 100A half brick massonary in c.m (1:4) in foundation trench up to plinth…

P/V centering and shuttering in foundation trench….

Providing M-S reinfrocement etc .all complete job.

12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement

63 mm size brick aggrigate outer side of soak pit

DESCRIPTION

Boring Providing and installing bored cast in situ single under reamed piles

Surface dressing of the ground

Earth work in excavation in foundation

Earth work in back filling

S/Filing Local sand in Foundation&Plinth

P/L PCC In

PCC 1:4:8 in foundation

Centering and shuttering for PCC work

Providing 50 mm th. DPC at plinth level

Extra for providing water proofing material per 50 kg of cement…

Prov.RCC M20

All work from plinth level upto floor V level

roof beam, Roof slab,Lintel,Stair case,Chajja, Band

Centering&shuttering

Extra for additional height in centring,

Reinforcement for RCC work

100A Brick work in Cm 1:6 in F/p

Extra for Brick work in superstructure above plinth level

7 cm Brick work with bricks ofclass 100A in CM

Half brick work with bricks of100 in cm 1:4

Extra for half Brick masonry in superstructure above pinth level

Extra for providing 2 nos 6 mm dia ms bars

Providing and fixing T-iron frame

Providing and fixing 1 mm thick M.Sheet

Providing and fixing factory made panel PVC door shutter

P/F non decorative flush door shutter

P& F M.S grills

P & F cupboard or ward robe locks

Providing and fixing aluminium but hinge

P&F Alluminium sliding door bolt

P&F Alluminium sliding tower bolt

P&F Alluminium handles

P&FAlluminium hanging floor door stopper

Bright finished 100mm mortice lock

Providing and fixing aluminium tee curtain rod

P&F steel windows& ventilator

Extra for steel beading

Providing and fixing pressed steel door

Providing and fixing circular cast iron box for ceiling fan clamp

Steel window fastner

Steel window peg stays

Steel work welded in built up sections

40mm dia G.I pipe in stair hand rail

40 MM Th.Cement concrete flooring 1:2:4(

18 mm th.Cement plaster 1:3 in skirting

Providing and fixing glass strips

Providing and Laying 300 x300 mmCeramic

Ceramic glazed wall tiles in dado

100A one brick flat soling in plinth

Providing average 150mm thick dry rammed khoa

Making Khurras

12 mm thick Internal Cement Plaster

15mm CP 1:6 in internal surfaces

6mm CP 1:4 in ceiling

12 mm cement plaster 1:3 with punning up to plinth.

Distemper with 1st quality washable dimtemper. For New Work

Water proof cement paint

Applying priming coat

2.5 times of total area

synthetic enamel paint on wooden & steel

Forming groove of12x12mm and up to

12 mm thick cement plaster with water proofing in cm (1:3) with neat cement punning…E/I.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Description

Providing and fixing white vitreous china water closet squatting pan (Indian type):

Providing and fixing soil,waste and vent pipes

metre

Provding and fixing heel rest sanitary bend

Provding and fixing single equal plain junction of required degree with access door ,insertion rubber washer 3mm thick ,bolt and nuts complete

Provding and fixing terminal guard

Providing and fixing on wall face unplasticised-PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion

Metre

Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised PVC rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Excavating trenches of required width for pipes, cables etc including excavation for sockets and dressing of sides, ramming of bottoms depth upto 1.5m ,including getting out the excavated soil , and then returning the soil as required,in the layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming watering and desposing of surplus excavated soil as dirceted within a lead of 50m

pipes cables etc exceeding 80mm dia but not exceeding 300 mm dia

Providing and laying non -pressure NP2 class(light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete

150 mm dia R.C.C. pipe

Constructing brick masonary manhole in cement mortar 1:4 (1 cement, 4 coarse sand.)with R.C.C. top slab with1:2:4 mix(1 cement, 2 coars e sand, 4 graded stone aggregate 20 mm nominal size) foundation cocrete 1:4:8 mix (1cement, 4 coarse sand, 8 graded stone aggregate 40 mm nominal size.) inside plastering 12 mm thick with cement mortar 1:3 (1 cement, 3 coarse sand.) finished with floating coat of neat cement and making channels in cement concrete 1:2:4. finished with floating coat of neat cement complete as per standard design.

Inside size 90x80cm and 45 cm deep including C.I. cover with frame ( light duty) 455x610 mm internal diamension total weight of cover and frame to be not less than 38 kg (weight of cover23 kg and weight of frame 15 kg )

Constructing soak pit 1.20x1.20x1.20m filled with brick bats including S.W.drain pipe 100 mm diameter and 1.20 m long complete as per standard design

India mark-II hand pump with all accessories including 8 nos (3 mtr lenhtg each ) connecting rod and one cylinder confirming IS:155000 ( part 1-8)/2008

125 mm dia U.P.V.C. casing pipe confirming to IS: 12818-1983/1992

32 mm dia medium quality G.I riser pipe and 8 nos 3 mtr length (3 mtr each length confirming IS : 1239

40 mm dia x 2 mtr long UPVC RIBBED strainer confirming to IS : 12818-1983/1992

125 mm dia x 40 mm x UPVC reducing socekt

40 mm nominal outer dia CPVC PIPE

supplying all materials labours and equipment for constructing platform with foot rest etc all complete jobs

Supplying drians 3 m as per design etc all complete job as per direction of E/I.

boaring by jet dheki by suitable cutter or reduces as the case may be lowering 125 mm UPVC x 40 mm dia G.I pipe & strainer or standsradd quality iron shoe plug & socket etc all complete including providing all tols and plants required for the job as per specification and direction of the engineer in charge

Supplying labours and equipment including 125 mm dia G.I cap & fitting and fixing over the TW properly and taking it out as per direction of E.I cap will be propert of the contractor 1No

Providing all labours for fiiting and fixing of india mark II hand pump including supplying all tools an plants required for the all jobs complete as per direction

supplying all tools equipment all labours for lowering 32 mm dia medium quality G.I pipe (riser pipe) in ddrilled TW in 3 mtr length

providing all labours for fitting and fixing of deep cylinder with the riser pipe including neceesary connecting and jointing materials chrom leather bucket all tools & plants required for the job low water level all complete job as per specification and direction of E/I

Suppliying all materials & labours for arrangement of addititonal water required during the drilling work all complete job as per specification and direction of E/I

development and t Testing of T/W till the discharge is free from sand one item all complete job as per specification and direction of E/I

DESCRIPTION

Providing E/W in excavation in foundation trenches etc…..all com. Job

S/Filing Local sand in Foundation & Plinth

100A one brick flat soling

Prov.RCC M15 up to plinth level

P/V RCC M20 IN Stiffner….

P/v R.C.C M20 in Top Band

Centering&shuttering

Reinforcement for RCC work

100A Brick work in Cm (1:6) in F/p

P& F M.S grills

Steel work welded in built up sections

15mm th. Cement Plaster with C.M(1:6)

Water proof cement paint

synthetic enamel paint on steel

Executive Engineer L.A.E.O- 02 SONPUR

Point

Point

Point

Meter

Meter

Meter

Meter

Meter

Meter

Nawada

Pakribarawan

Source

Tonne.KM

Haulage Cost

Executive Engineer

DESCRIPTION

Providing znd installing cast in situ single under reamed piles

Surface dressing of the ground

Earth work in excavation in foundation

#VALUE!

Earth work in back filling

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

S/Filing Local sand in Foundation&Plinth

#VALUE!

#VALUE!

P/L PCC In

PCC 1:4:8 in foundation

#VALUE!

Centering and shuttering for PCC work

#VALUE!

Providing 50 mm th. DPC at plinth level

Extra for providing water proofing material per 50 kg of cement…

Prov.RCC M20

#VALUE!

#VALUE!

All work from plinth level upto floor V level

roof beam, Roof slab,Lintel,Stair case,Chajja, Band

#VALUE!

#VALUE!

#VALUE!

#VALUE!

Add for using extra cement in the items of design mix

Centering&shuttering

#VALUE!

Extra for additional height in centring,

Reinforcement for RCC work

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

100A Brick work in Cm 1:6 in F/p

#VALUE!

#VALUE!

Extra for Brick work in superstructure above plinth level

#VALUE!

7 cm Brick work with bricks ofclass 100A in CM

Half brick work with bricks of100 in cm 1:4

Extra for half Brick masonry in superstructure above pinth level

Extra for providing 2 nos 6 mm dia ms bars

Providing and fixing T-iron frame

Providing and fixing 1 mm thick M.Sheet

P& F M.S grills

Providing and fixing circular cast iron box for ceiling fan clamp

Steel work welded in built up sections

40mm dia G.I pipe in stair hand rail

40 MM Th.Cement concrete flooring( 1:2:4)

18 mm th.Cement plaster 1:3 in skirting

Providing and fixing glass strips

Providing and Laying 300 x300 mmCeramic

Ceramic glazed wall tiles in dado

100A one brick flat soling in plinth

#VALUE!

#VALUE!

Providing average 150mm thick dry rammed khoa

Making Khurras

12 mm thick Internal Cement Plaster

15mm CP 1:6 in internal surfaces

#VALUE!

6mm CP 1:4 in ceiling

12 mm C.P (1:3) with punning

White Lime wash

Water proof cement paint

#VALUE!

#VALUE!

Applying priming coat

2.5 times of total area

synthetic enamel paint on wooden & steel

Forming groove of12x12mm and up to

12 mm thick cement plaster with water proofing in cm (1:3) with neat cement punning…E/I.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Excavating,supplying and filling of local earth by mechanical transport up to lead of 3 km

#VALUE!

#VALUE!

#VALUE!

#VALUE!