WBPWD/EE/AED /eNIQ-17/2025-26

Amount

Supplying only the following rating 1.1KV grade XLPE insulated A/Al. Cable as below:[Havells/RR Kable/PolyCab /EIC Approved]: i).2 core 10 sq mm.

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. i). From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying & fixing medium gauge GI Pipe (TATA-Medium) Protection with necessary fittings and jointing materials as required. i). 40mm dia. (Pole Base to Loop Box)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : i).For 2 core 10 sq mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make),tapes, anticorrosive paste & jointing materials. i).For 2 core 10 sq mm.

Supply & Drawing 1.1Kv grade single core 3X1.5 sq.mm. PVC insulated, unsheathed multi-stranded copper wire (Finolex/ KEI/ Havells) from the loop box to light fittings through pole in 19mm PVC Polythene pipe and making necessary connections as reqd.

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes................. i).1.5 sq mm.

Supply & Fixing of 240V NW LED street light/Flood light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07/08 with 10KV Built-in Surge Protection Device & temp. range should be 5700K (as per direction of EIC), system efficacy minimum 120lm/watt. manufacturer's warrenty should not be less than two(2) years. i). 240V,120W Street Light (Make- Philips/Havells/ Transrail/ Magik-SPSL120W/As per direction of EIC].

ii). 240V,120W Flood Light (Make- Philips/Havells/Transrail/ Magik-FWZP120C/As per direction of EIC]

iii)240V,20W Street Light Fittings (Make- Philips/Havells/Transrail/ Magik-SPBN020W/As per direction of EIC]

Providing CC (6:3:1) muffing 600x600x760 mm in size or eqv. size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary. A) Without Loop Box.

Supply & Fixing of Moisture proof,water-proof (outdoor type) IP-66 protected PVC cable looping box (Sintex make/Lauritz & knudsen/Eqv. Siemens make) with minimum size of 240 x 130 x 95 mm deep having 2mm thick body enclodure comprising of one 240 V,6Amp SP'MCB ('C'-curve,legrand make) on din channel ,with 2way copper terminal and having lined with rubber gasketed top cover should be fixed on Pole by heavy duty Clamps, screws,nuts, washers etc, necy. "cu" socketting on both end, rubber gasketted entry and exit as mending with proper finishing is required as per direction of EIC..

Supply & Fixing circular shaped (800-1000mm Dia) GI (Hot Dip) housing/Header on Existing S.T/G.I pole for holding of 4Nos LED Flood light made by 40mm G.I Pipe,centre cap of the circular header should be made by 80-100mm dia 300mm length M.S medium pipe with necy. Enamel painting as required as per direction of the E.I.C.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Upto 9.0 mtr. long pole. i). One coat of red lead/Zinc chromate priming. ii). 1st coat of synthetic enamel paint over the primer. iii). ) 2nd coat of synthetic enamel paint over the 1st coat.

Supply & Delivery of Heavy Duty fully Metal body Pedestal Fan of following Sizes :[EPC Make/Crompton/ Eqv. EIC Approved] i). 450mm/18''.

Supply & Delivery of AC ceiling fan incl. All acessories (blades,canopy,fork, rubber bush etc.) & the capacitor of the fan should be P-2 type burst proof & must have safety wire/rope directly from fan hook to stator of the ceiling Fan.(Anti-Dust Product). i). 48",1200mm,230volt,50watt, 1, 1* rated. [Make : crompton/Havells/ Orient/ Eqv. EIC Approved]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply and Delivery of Commercial type indoor mounting rail for SINGLE LED tube light frame [PHILIPS-TMC 502 1xT-LED 22W/Eqv Jaquar Model/EIC Approved] complete with all accessories.

supply and delivery of 1No. 4', 18W LED Tube]. [Philips:Master Led Tube 1200mm 18W-865 T8 IND -2100 lumen/ Eqv Jaquar Model/EIC Approved] for the above tube frame fittings.

Fixing only single /twin LED tube light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener & flexible cord.

Supply & delivery 3W Recessed mounted spot light false ceiling fittings(round/square) with all accessories(Make phillips/crompton-CDR-210-03-30/40-SL-NWH/Havells)

S/D 15W LED Recessed light(round/Square Shape)( MAKE-Crompton-LSCRM-15W-CDL/PHILIPS/Havells)

Fixing only ceiling fittings with screw etc

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Add GST @18% On total from item no 1 to 24.

Add LWC @1% On total from item no 1 to 25.

DURGAPUR POWER (BID ID -6880039)

M/S S. CHATTERJEE (BID ID -6875645)