Karnataka

Active

Works

Buildings

Estimate for Electrical Work and Other Repair work to Accounts Section in CSR&TI, Mysuru City

Public Works Department

PWD Speical Division Office Mysuru | Mysuru, Karnataka

Amount: Refer DocsCloses: 30 Sept 20264d left

Timeline

Published16 Sept 2026
Closes30 Sept 2026
Bid Opening1 Oct 2026

Tender Value

Refer Docs

EMD Value

₹21,160

Closing Date

30 Sept 2026, 5:00 pm4d left

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

G KRISHNA

Mobile Number

Work Description

Estimate for Electrical Work and Other Repair work to Accounts Section in CSR&TI, Mysuru City

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT39932

Reference Number

PWD/2026-27/BD/WORK_INDENT39932

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Speical Division Office Mysuru

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN from CA and Profit & loss statements for the year 2021-22, 2022-23, 2023-24,2024-25 and 2025-26

RequiredKPWD Registration Certifcate-CLASS-IV & ABOVE

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Procurement portal due to internet connectivity issues and technical glitches at bidders end

EMD Payments through K Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value Min Rs.500 and Max Rs.7500 soon after contract has been issued to bidder.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

Contractor should carryout additional test required to test the suitability of materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Materials like ASPHALT, AGGREGATES, steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.2 of STD tender document Attached.

All the items in the tender include all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer- in-charge of this work.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client

Contractor should follow strictly the prevailing rules of labour act

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-1

Contractors should be registered as KPWD Class IV and above Civil Contractor.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public works Department Special Division Mysore during office hours on all working days.

The successful Tenderer shall deliver to the Employer a Security deposit in the form of NSC/DD/FDR in the name of the Executive Engineer, PWD, Special Division, Mysore given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered.

To qualify for award of this contract each tendered in its name should have in the last five years 2021-22, 2022-23, 2023-24 ,2024-25 and 2025-26 achieved in at least two financial years an average financial turnover in all classes of civil engineering construction works only of Rs 8.46 Lakhs.

Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

The contractor should pay the wage for labour as per schedule of rates. The contractor quoting less rates below schedule of rates for labour will be rejected.

ALL THE RATES ARE EXCLUSIVE OF GST AND GST WILL BE PAID SEPARATELY

Technical Criteria

Capabilities of Vendor

KPWD Registration Certifcate-CLASS-IV & ABOVE

PWD Registration Certificate (Class I/II/III/IV)

List of existing commitments and ongoing work

Work Done Certificate

List of works for which tenders already submitted

Work Done Certificate

Financial Status

Tenderers will only be qualified, if their available tender capacity is more than the total tender value. i.e. A x N x 2.5 - B as per KW-1 Document.

Audited CA Certificate of Annual Turnover

Annual Turnover Certificate with UDIN from CA and Profit & loss statements for the year 2021-22, 2022-23, 2023-24,2024-25 and 2025-26

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹21,160

Important Dates

Last Activity

16 Sept 2026

Published

16 Sept 2026

Bid Opening

1 Oct 2026

Download Ends

29 Sept 2026

BOQ Preview

•

Estimate for Electrical Work and Other Repair work to Accounts Section in CSR&TI, Mysuru City

•

Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all co...

•

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

•

Supplying & fixing retrofit type-PL- LED Lamp . W LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM ...

•

Supplying & fixing - flexible LED Strip Light . W Power consumption in 5 ms length CCT6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM...

•

Supplying of . TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410...

•

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. Item no ...

•

Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, C...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Item no3.6.1 vol 6

•

---- Including cost of all mat...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Item no 3.6.3

•

---- Including cost of all mater...

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. Item no 3.7 vol 6

•

---- Including co...

•

Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. 400 mm Sweep Item no 6.5.2 vol 6

•

---- Including cost of all materials, with all lead lift and labour charges,...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-1 GENERAL.doc

Tender Document • 1.06 MB

EXCEL COPY.pdf

Others - NOTIFICATION COPY • 0.61 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Buildings

Estimate for Electrical Work and Other Repair work to Accounts Section in CSR&TI, Mysuru City

Public Works Department

PWD Speical Division Office Mysuru | Mysuru, Karnataka

Amount: Refer DocsCloses: 30 Sept 20264d left

Timeline

Published16 Sept 2026
Closes30 Sept 2026
Bid Opening1 Oct 2026