SPL REP TO BLDG NO T15 FRESH SHED T17 RICE SHED T669 FRESH SORTING SHED 16SRW TO EXISTING FENCING WITH CHAIN LINK FENCING BARBED WIRE CONCERTINA COIL AT FOI DUMP 18SRW AND TO BLDG NO T25 AND T24A 19SRW AT 436 COY ASC SUP AT BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

Dismantling wooden fillets in rafter purlins etc unframed work under 40 sq cm in sections complete all as specified & directed.

S&F steel work as in tubular (round/square/rectangular) shape of pipes as approved trusses of semi circle shape including post special shaped washers etc including necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed.

M&L for MS work, angle iron, flat iron, MS plates as in brackets, cleats, fastners, wind ties, supports, base for posts etc with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for preparing new or untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and celling hard boards/AC sheets and plywood in any thickness & any position including cover fillets complete all as specified and directed.

M&L for galvanised cold rolled steel section frame work size 600x600mm grid size using 24mm x 38mm x 0.50mm (composite thickness) tee (bottom pre-coated) and 24mm x 24mm x 0.50mm (composite thickness) wall angle galvanised cold rolled steel section including suspenders as per (Gabsec) manufacturs instruction as in ceiling complete all as specified and direcetd. (Make : GAPSON (Gabsec) or equivalent as approved by GE)

M&L for Asbestos free calcium silicate board of size 600mm x 600mm x 4 mm thick decorative type fire resistant, moisture resistant and tested as per IS 14862-2000 fixed to steel frame work as in ceiling, including applying two coats of oil bound distemper complete all as specified and directed.

M&L for Block boards 18mm to 19 mm thick , grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

M&L for 0.90 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified & directed.

Taking down chowkhats or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F powder coated aluminium fabricated work as in doors, windows, partition as per manufacturer instruction including necessary jointing cleats, anodised aluminium snap beading including taking down damage portion of damage doors,windows or taking down door/window complete all as specified and directed. (Make- Jindal/Ajit India/Hindlco) Note:- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges etc.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed) and polishshed( in cooking platform, steps, jambs, pillar and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over 15 mm screed bed in cm 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing and 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No. 18.00 but on skirting 20-22mm thick kota stone including 10mm thick rendering in cement mortar 1:4.

S&F 125mm X 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc made out of 1.25mm thick MS Sheet complete all as specified and as directed.

M&L for framed work such as grills, gratings, gate, doors etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, frame for partition ,framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, including lugs with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay including lugs but without glazing bar dovetailed or welded complete all as specified and directed.

Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above GL) complete all as specified and directed.

Hardcore of broken stone or boulders of quage n exc 63mm, deposited , soread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1, using 20 mm graded stone aggregate in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified and directed.

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws complete all as specified & directed.

S&F Steel rolling shutters thickness of lath 1.25 mm, with out ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull but gear operated type with bevel gear box and crank handle complete all specified and directed

M&L for providing PCC 1:3:6 type C-1 using 20 mm graded stone aggregateas in copings/benching and similar works complete all as specified and directed

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including wall tiling if any, racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on new or old brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on new or old brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of acrylic exterior water base emulsion paint on walls over a coat of waterproof putty complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed.

M&L for TMT steel bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed with tinned tacks, or galvanised wire staples fixed complete all as specified and directed.

S&F in repairs 20mm dia curtain rails, mild steel, chromium plated ornamental with fixing brackets, stops rollers etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350mm x 250mm x 7mm 450mmX350mmX7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for Heavy duty tiles Endura with grey/coloured cement and pigments 30cm x 30cm x 10mm thick, set, jointed and pointed in near cement slurry in floors laid on 15mm thick cement mortar 1:6 complete all as specified and directed.

Dismantling posts or struts embeded in concrete brick work or masonary (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/ loose soil complete all as specified and directed.

M&L for clean dry sand filling under floors or in foundation including watering and consolidation complete all as specified & directed.

M&L for cement concrete (nominal mix) using 40 mm graded stone aggregate Type C2 1:3:6 foundation , including rafts, footings,bases for col etc. complete all as specified & directed.

M&L for mild steel angle, flat work as in posts and struts in fencing incl cutting tops to shape, drilling holes, notching for wire etc, flat iron fillets (for scruing wire mesh etc) including all necessary drilling bolting or riveting etc conforming to Fe 410 complete all as specified & directed.

S&F M S TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking bending spirally for hooping for column hooking ends and binding with and incl mild steel wire annealed not less than 0.9 dia or securing with clips complete all as specified & directed.

S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and neck of 11 to 15 mm dia complete all as specified & directed.

S&F for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, incl securing or typing at crossing with and provision of G.I wire staples or steel pins etc. complete all as specified & directed.

Supply only chain link fencing weight n.exc 3 Kg/Sqm complete all as specified & directed.

Fixing only chain link fencing incl line wire, any mesh, size & type to any type of standards, rails, bolts etc. complete all as specified & directed.

M&L for concertina coil fencing with required dia 600 mm upto 3 m heigh of wall with existing angle iron Y shaped placed 2.4 or 3 m apart and with 9 horiontal RBT stud tied with GI stample weight 43.47 kg / rmt complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 12mm thick prelaminated particle board both sides with decorative choice lamination fixed with screws complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 30 mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.

S&F factory made PVC moulded shutter but wire gauzed i.e. Panel will be of wire gauze in lieu of wood grain printed PVC sheet panel . The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified & directed.

S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and directed.

S&F Vitreous China Oval shaped cunter top Wash Basin, white , flat back, Size 550mmx400mm / std size including waste pipe , coupling, PVC pipe connection 15mm dia, 600mm long complete all as specified & directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each panels complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed and with stainless steel wire staples fixed complete all as specified and directed.

S&F 35 mm thick plain framed, factory made panelled shutter (second class hard wood rails & styles) (two or single panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & directed.

M&L for Providing PCC 1:2:4 using 12.5mm aggregate and reinforcement for precast cement concrete jallies, 25mm thick (mea sured solid), including all mouldings but excluding frame etc. complete all as specified & directed.

Providing, precast cement concrete type B1 1:2:4 in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar 1:4 with joints to match complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber rings joints fixed to walls with clamps and brackets complete all as specified and directed.

Dismantling water tanks exc 250 ltr cap & n.exc 500 ltr cap of any size or capacity and removing to store complete all as specified and directed.

Dismantling water tanks exc 500 ltr cap & n.exc 1000 ltr cap of any size or capacity and removing to store complete all as specified and directed.

S&F 500 Ltr Cap Rotational Moulded Polyethylene Water Storage Tanks (cylindrical vertical with closed top) triple layer, ISI marked hoisting & fixed in position complete all as specified in SSR part-I of following capacity:- Make : Sintex (Ist Quality), Polywell/ Plasto

S&F 1000 Ltr Cap Rotational Moulded Polyethylene Water Storage Tanks (cylindrical vertical with closed top) triple layer, ISI marked hoisting & fixed in position complete all as specified in SSR part-I of following capacity:- Make : Sintex (Ist Quality), Polywell/ Plasto

Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm GI tube medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for concealed point wiring for light point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, ISI marked controlled by one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories(PVC Casing and caping to be done wherever wiring to be run on ceilings and concrete surfaces including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface, including laminated hylum sheet cover, ISI marked of Make " Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per arroved colour code in IE rule. Rate includes chase cutting for concealed wiring Make of Cable : Polycab/ L&T/ Havells

All as per item No. 81.00 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed.

All as per item No. 81.00 here-in-before, but for 3 pin 5 amp switch socket combination on independent board with other switch complete all as specified and directed.

All as per item No. 81.00 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F in repair Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified & directed.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked complete all as specified & directed.

S&F Polycarbonate ceiling rose, surface type, 3 terminal, 240, ISI marked complete all as specified & directed.

S&F Polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type complete all as specified & directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified & directed.

S&F Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked complete all as specified & directed.

Taking down main switches/MCB DBs of any capacity/type including MCBs complete all as specified & directed.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, double door with MCCB as incomer (Vertical type double door) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F MCCB 3 Pole 415 V fixed type,125 Amps with breaking capacity 30 KA complete all as specified and directed.

S&F flush to wall, double door MCB DB, SPN 8 way, 240 volts grade, with 200 amps rated bus bar of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete fitted on wooden board first class of suitable size complete all as specified and directed.

S&F MCB SPN 32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' curve including connection with suitable size aluminium / copper lugs complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.3 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed.(Note: Unit rate of earthing deemed to be included with GI wire 4 mm, GI pipe light grade protection pipe 15 mm up to 7.5 RM)

S&F MIST FAN cooler water height 6.5 ft of size 26" oscillating fan 70 degree ,45 litre tank capacity material type stainless steel, 4 castor wheel for easy movement adjustable mist volume with 3 step adjustable speed control with matte finish powder coated complete all as specified and directed. Make: Eurokraft or equivalent make as approved by GE.

S&F fully SS 304 roof air ventilator of throat size 24” total set with FRP/ POLYCARBONATE base plate with ventilation tiles of size 2'X 2' complete with and including of following specification: 1. Turbine Dia 32 Inch (812mm) 2. Neck/Throat Diameter 24 Inch (600mm) 3. No. Of Vanes (Blades) 42 Vanes 4. Height 17.5 Inch (445mm) 5. Base Ring MOC (Mounting Ring) Stainless Steel SS 304 (0.45 MM) 6. Top Plate MOC Stainless Steel SS 304 (0.45 MM) 7. Vanes MOC SS 304, 0.5 mm Thickness 8. Rotation Frictionless Rotation Even At Lowest Wind Velocity 9. Center Shaft SS 304 (14 MM Dia) 10. Inner Arms SS 304 (5.2 MM Dia) 11. Rivets Copper 12. Hardware HP Screws (Size 12-14 X 55MM) 13. Suction Area 500 Square Foot 14. Color Opaque 15. PC Base Plate As Per matching Your Sheet Profile, 2 mm Thick, Transparent, 1.020 Mtr Wide & 1.65 Mtr Long Matching Your Sheet Profile, Weight 3 Kg. (Approx) 16. Ventilator Weight 8.25 Kg (Approx) 17. Center Width 800mm ± 5 mm 18. Dia of Bottom Ring 600mm ± 5 mm 19. Bearing- Double Ball Bearing Note: Tenderer shall submit the guarantee for 2 years from the manufacturers for smooth functioning of air ventilator.

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in any type of soil for laying cables, erection of poles complete all as specified & directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified & directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified & directed.

Sand cushioning/sand covering for underground cable protection complete all as specified & directed.

Brick Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified & directed.

Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 3.5 x25 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified & directed. Make of cable : Havells / Polycab/ KEI/ Ravin cables.

Taking out existing unserviceable pipe and S&F GI Tubes, 'light grade' galvanised of 50 mm bore, with all fitting and laid in floors, under road, pavement or hard standing, along pole steel tubing for protection of UG cable complete all as specified and directed.

M&L for cutting PCC/floor/road and taking out cable and making good, including material as per existing after laying of pipe for cable protection, size of trench not more than 0.30 x 0.30 m complete all as specified and directed.

Deduct schedule of credit (calculation will be done off line) Rs. 46,618.00

NDS TRADERS

M/S Shanti Enterprises

M/S Shanti Traders

R K Sales

M/S RAKESH TRADERS

Samaksh Enterprises

RAJPATI CONSTRUCTION

Vee kay construction