REPAIR AND ROUTINE MAINT INCLUDING PERIODICAL SERVICES OF LIFTS IN BLDGS E(W),B(E),C(E),D(W),F(E),H(W), AND VISHWAKARMA AT NOFRA UNDER GE(NW) NOFRA,COLABA,MUMBAI

Amount

Sch 'A' Part-I Repair/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of cracked /broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of unserviceable damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work , repalcement of floor mats,changing of broken graintes, minor repair of cabin light and minor repair of cabin fan , ensuring safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arises all as directed by Engineer-in-Charge. for the following lifts: Location :- Bldg No. B (E), C (E), D (W), F (E), E(W) & H (W) (G+5 upper floor, 6 PS (408 Kg) at Nofra. (Total 06 Nos Lift) Existing Make: ESCON. Note: All necessary arrangement /spare parts required for smooth operation of lifts included in the quoted rate and except the parts of mentioned in Sch 'A' Part II shall be measured and paid separately.

All as per item No 1.00 above but 08 Passenger Lifts (544 Kgs) in Vishwakarma building (G+7 upper floor) 01 No lift at Nofra. Existing Make: ESCON

All as per item No 1.00 above but Goods Lifts (1000 Kgs) in Vishwakarma building (G+7 upper floor) 01 No lift at Nofra. Existing Make: ESCON Note : - For item No. 1.00 to 3.00 (i) The Contractor has to carry out the AMC of the Lifts through OEM only (ii) The AMC should cover any/all parts of Lifts if its fucntions found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms. (iii) One mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (iv) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department. (v) The detailed lift mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints at round the clock daily including sunday and holiday.If he is found absent or move without intimating to incharge of lift cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected. (vi) The detailed lift mechanics shall sign (their shift wise) in the attendence register kept with lift cell. (vii) Cost of minor spare parts / routine material required for above mentioned maintenance is deemed to be included in the quoted rate except items mentioned here-in-after. No additional cost of spares is admissible for the above maintenance. Decision of the Accepting Officer shall be final & binding regarding minor spares/ routine material (viii) Monthly schedule for proper maintenance of lift and necessary documentation including all spare parts required to be replaced during the period shall be as directed by Engineer-in-Charge. (ix) All minor spare parts and parts required for repair / replacement for maintenance of lifts to be replaced during AMC at no extra payment.

Sch 'A' Part-II Disconnecting and taking out defective unserviceable old control system and supply and fixing New CANBUS integrated controller with drive based on collective control panel for trouble free maximum efficiency and longer life to the lifts of 06 /08Passengers lifts with all accessories complete all as specified and directed by engr-in-charge.

Disconnecting and taking out defective unserviceable machine encoder and supply and fixing of Machine Encoder suitable for 06 Passengers and 1000 Kgs goods lift installed in various building all as specified and directed by engr-in-charge.

Taking down old unserviceable DBR supply and fixing Aluminum covered wire wound dynamic breaking resistor to absorb the reserve energy dissipation of motor during regeneration in control operation suitable for existing capacity motor up to 15 HP VFD complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable COP after disconnecting old COP supply & fixing new car operating panel complete including dismantling all as specified and directed by Engineer-in-Charge.

Taking down unserviceable landing push button box complete with stainless steel plate push buttons and combined digital position indicator and arrow indicator supply and fixing landing push button box complete with stainless steel plate push buttons and combined digital position indicator and arrow indicator complete all as specified & directed by Engr-in-Charge.

Disconnecting and taking out defective unserviceable shaft information system and supply and fixing new shaft information system complete with all accessories all as specified and directed by engr-in-charge.

Distmantling and Taking out of existing shaft wiring and suppy and fixing new shaft wiring of the lift shaft with copper wire 16/.02 from lift room control panel to motor break devices and landing floor switch locks outside push button with indicators from half way junction for all landing and also to lift inside push button Complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old defective infra red door sensor of any type and make and supply and fixing new infra red door sensor of up to full length of car door complete all as directed by Engineer-in-Charge

Dismantling and taking out ARD control system and commissioning and testing of new ARD system including PC cards/diodes suitable for upto 10 HP motor including wiring with connected item in existing building. Make: Must be suitable as per existing make at site .

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 8 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight pulley and car cabin with clamps,nuts, bolts and washer etc complete all as specified and directed by Engineer-in-Charge

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fixing new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nuts, bolts and washers etc complete all as directed by Engineer-in-Charge

Complete Machine Overhauling by opening of Gear removing old dirty oil, cleaning & Replacing of new Gear oil refitting of the same with new packing & adjustment of thrust bearing & keep it into perfect working order complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable pit pulley and governor pulley with complete acessories and Supplying &fixing new pit pulley and governor pulley complete all as specified & directed by Engr-in-Charge.

Dismantling and taking out all defective batteries from existing ARD and supply and fixing new maintenance free batteries suitable for ARD including necessary connection like battery terminals of brass and copper lead heavy duty to connect the battery terminal of 12 VDC, 18 AH .

Taking down old unserviceable Aluminium chequered plate supply & fixing new aluminium Chequered plate of thickness of 5mm including removing existing plates complete all as specified and directed by Engineer-in- Charge,

Taking down unserviceable main pulley with complete set Supplying & fixing new main pulley with complete set complete all as specified & directed by Engr-in-Charge.

Dismantling and taking out unserviceable travelling cable from hoistway & supply and fixing new travelling cable PVC insulated 12 Core flat round type with standared copper conductor, 1100 volts grade of size 0.75 sqmm conforming to relavent IS in and including thimbles, suspended type freely moving with car cabin up and down movement between ground and upper floors including necessary proper connection with mid way junction and other connection required in circuit complete all as specified and as directed.

Disconnecting and taking out unserviceable emergency alarm system (hooter Type) complete and supply & fixing new emergency alarm system assembly on ground floor landing complete with PCB card battery backup charging unit and speaker including necessary control/electric connection wiring with COP and control panel complete all as specified ands directed in Central machine shope and various other lift of Nofra area complete all as directed by Engr-in-Charge.

Supply and Fixing in replacement of Car and Cwt Buffer Spring with all accessories of 06-/08/Goods Lifts installed in Various Bldgs In NOFRA all as specified and directed by Engr-in-charge.

Supply and Fixing in replacement of Floor Annocument System with all accessories for 06/08/Goods Lifts Bldg at Nofra, Colaba, Mumbai.

Taking down broken granite slab and material an labour for black granite slab, machine cut, mirror polished set on vertical surfaces allround with lift facial elevation including 10 mm thick backing coat with cement mortar (1:3) and joint filling with white cement with pigment to match with shade of granite for lift archive at all floors as specified and directed by Engr-in-charge.

Taking down old car door VVVF drive supply and fixing in replacement car door (VVVF) drive with all accessories confirming to IS and match with existing model, specifications and same capacity of exisiting items complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable/ burnt lift motor from the lift machine room and Rewinding of electrical motor 15HP capacity 3 phase 415 V , including rewinding of the motor by proper gauge of copper wire with class E insulation with Varnishing, heating and re-assembling and testing at the site all as specified and directed by Engineer-in-Charge .

Dismantling and taking out U/S car door from car cabin supply and fixing new car door comprises of 02 No power operated, auto telescopic / centre opening by horizontal sliding stainless steel panel of flush type panels complete with removed headers, hangers, door drive unit with full beam infrared sensor up to full length of car door, aluminium sill VVVF door drive unit for motor complete with all accessories control connection all as specified and directed by Engr-in-Charge .

Disconnecting and taking out defective landing Roller and supply and fixing new Landing Roller for 06/08/1000Kgs Lifts all as specified and directed by engineer-in-Charge.

Monarch Enterprises (BID ID -3102310)

Shree Elevator Engineering Co. (BID ID -3099166)

shakti engineering and electrical works (BID ID -3098704)