Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC BHANGARMATH THAKURANI CHAWK PO SAMABYPALLY BALLY HOWRAH 711 205 WEST BENGAL | HOWRAH | WEST BENGAL | 711205 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹47.5 L+₹3.5 L (7.84%)Rejected-Finance 165 UTTAR KASTODANGA ROAD KOLKATA 700 061 | KOLKATA | KOLKATA | WEST BENGAL | 700061 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹47.5 L+₹3.5 L (7.94%)Rejected-Finance 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹48.4 L+₹4.4 L (10.0%)Rejected-Finance VILL PUILLYA PO UNSANI DISTT HOWRAH PIN 711302 | HOWRAH | WEST BENGAL | 711302 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹48.9 L+₹4.9 L (11.2%)Rejected-Finance 6 NALAPUKUR LANE FLAT 2C SENHATI COLONY KOLKATA 700034 WEST BENGAL | KOLKATA | WEST BENGAL | 700034 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹42.4 L
EMD Value
₹84,800
Closing Date
24 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
SPECIAL REPAIR TO BLDG NO. KP-2 (16 QTRS) AMD ADDN/ALTN OF FOOTPATH, ROAD SIDE WALKWAY FROM NATURE PARK TO WATER GATE AT ZONE-II OUTSIDE FORT WILLIAM UNDER GE(FW) KOLKATA
2023_MES_593031_1
8105/E8
Open Tender
Civil Works
Item Rate
180 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹84,800
20 Jun 2023
3 May 2023
25 May 2023
3 May 2023
24 May 2023
17 May 2023
Amount
SCHEDULE 'A' PART-I (B/R WORKS) Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs, beams, columns, lintel, chajja, fins, facia etc. of 50 mm average thickness (Any storey/ height of building/ structure) including tapering all edges, making square shoulders of cavities by air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting including removal of foreign materials, loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed by Engr-in-Charge.
Deduct / Add for below / over 5mm or part thereof thickness for item No 1.00 above (Any storey/ height of building/ structure)
Removing of concrete all around reinforcement bar up to 12 mm dia from behind the reinforcing bars average 25mm (but not less than 15mm) air gap by manual methods (using wire brushing , chiselling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar as per manufacturer's specification and removing all rust from steel reinforcement bar by emery paper and cleaning the area thoroughly by water and allow it to dry and making the reinforcement bar totally rust free (for any storey/ height of building/ structure) complete all as specified and directed. (Make of Rust removing chemical :- Reebaklens RR of FOSROC or equivalent product in SIKA / PIDILITE / BASF / CHOKSEY) (NOTE: Surface area of cleaned steel reinforcement shall be measured for payment)
Removing of concrete all around reinforcement bar above 12 mm dia from behind the reinforcing bars average 25mm (but not less than 15mm) air gap by manual methods (using wire brushing , chiselling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar as per manufacturer's specification and removing all rust from steel reinforcement bar by emery paper and cleaning the area thoroughly by water and allow it to dry and making the reinforcement bar totally rust free (for any storey/ height of building/ structure) complete all as specified and directed. (Make of Rust removing chemical :- Reebaklens RR of FOSROC or equivalent product in SIKA / PIDILITE / BASF / CHOKSEY) (NOTE: Surface area of cleaned steel reinforcement shall be measured for payment)
M&L for applying a coat of epoxy bonding agent on existing concrete surfaces, with mixed density 1.48 Kg/litreand adhjesive bond strength>2.50 MPs, mixed and applied as per manufacturer's specifications complete all as specified and directed. (Make- Nitobond EP of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
Material, labour and preparation of existing reinforcement surface (at any storey/ height of building/ structure) by brush and application of two component epoxy zinc rich primer of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre on existing reinforcement surface complete all as specified and directed. Make- Nitozinc primer of FOSROC or equivalent product in SIKA / PIDILITE / BASF / CHOKSEY)
M&L for introducing new mild steel TMT reinforcement bars upto 12 mm dia for structural connection in RCC beams, columns, lintel and slabs (for any storey/ height of building/ structure) including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and up to 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges, plastic nozzles etc as per manufacturer's instructions etc all as specified and directed. (Make of epoxy chemical :- Lockfix E75 of FOSROC / Hilti HY 150 or equivalent product other makes specified in tender) (NOTE: Quoted rate is deemed to be inclusive of the cost of reinforcement bars)
M&L for introducing new mild steel TMT reinforcement bars above 12 mm dia for structural connection in RCC beams, columns, lintel and slabs (for any storey/ height of building/ structure) including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and up to 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges, plastic nozzles etc as per manufacturer's instructions etc all as specified and directed. (Make of epoxy chemical :- Lockfix E75 of FOSROC / Hilti HY 150 or equivalent product other makes specified in tender) (NOTE: Quoted rate is deemed to be inclusive of the cost of reinforcement bars)
Material , labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days, 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 60mm and including surface preparation & suitable type formwork etc. as per manufacturers instruction complete all as specified and as directed. (Make of micro concrete:- Renderoc RG of FOSROC or equivalent product in SIKA / PIDILITE / BASF / CHOKSEY)
Material , labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days, 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitable type formwork etc. as per manufacturers instruction complete all as specified and as directed.. (Make of micro concrete:- Renderoc RG of FOSROC or equivalent product in SIKA / PIDILITE / BASF / CHOKSEY)
Deduct / Add for below / over 5mm or part there of thickness for item No 10.00 above complete all as directed.
M&L for teatment of existing wall surface with tartaric acid or oxalic acid to remove all the existing salt from the surface then rinsing the entire wall/slab surface and applying 15 mm thick two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days, 7 MPa at 28 days respectively (maximum coverage area 1.30 sqm per 25 kg pack @ 10mm thickness) over a coat of epoxy bonding agent on existing surface for strengthening of beams, columns and other structural element of average thickness 25 mm and mortar shall be applied in layer not exc 6 mm thick in layers and including surface preparation as per manufacturer's instructions complete all as specified and directed (any storey/height of building/structure). (Make- Rendroc S2 (for mortar) & Nitobond EP (for bonding agent) of FOSROC or equivalent product in other makes specified in tender)
Material, labour and applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction (for any storey/ height of building/ structure) complete all as specified and as directed. (Make:- Concure LP90 of FOSROC or equivalent product in SIKA / PIDILITE / BASF / CHOKSEY)
Providing and fixing double steel scaffolding system (cup lock type) on the exterior side of shaft portion (only) of building of any height including additional rows of scaffolding in stepped manner as per requirement of site, made with minimum 40mm dia M.S. Tube, placed 1.5 metre centre to centre(maximum), horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. Tube challis, M.S. Clamps and staircase system in the scaffolding for working platform etc and maintaining it in a serviceable condition for execution of work and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of GE. Notes:- (1) The elevational area of shaft portion of building (length/breadth of shaft X height of shaft) covered with scaffolding shall only be measured for payment purpose. (2) The payment shall be made for one time only for execution of all items of each face of shaft portion of building. (3) After completion of work all scaffolding materials shall be removed from building /structure by the contractor and the same shall be the property of the contractor and accordingly rate shall be quoted.
M&L for applying cementitious grouting by mixing admixture with cement slurry at a dosage of 225 ml per bag of cement and injecting with high pressure by a pressure grouting pump through non-return PVC nozzles prefix with rapid setting cementitious plugging mortar to fill all possible pores and gaps left within the old concrete mass of buildings of any storey/height. Pumping shall be stopped only when the flow of grout stops or shows refusal or grout flows out from adjacent nozzle and the nozzle shall be tied up and allowed to set for 24 hours. The PVC nozzles shall be sealed off with quick setting cementitious plugging mortar. Grouting operation shall be carried out through next nozzle till the entire area is covered. The grouting holes shall be finished by removing the protruded portion of nozzles and finishing flush with the surface complete as per manufacturer's instritions & as directed by Engr-in-Charge. (Make of Grouting Admixture:- Cebex 100 of FOSROC or equivalent product other makes specified in tender) (NOTE: The work shall be got executed through authorised applicator of the chemical manufacturers. Necessary documents to this effect shall be obtained from manufacturer and submitted to the Engineer-in-Charge. Contractor shall provide additional manpower, resources, preparatory work etc. required for execution of the work as required by the authorised applicator. Quoted rates are deemed to be inclusive of the above aspects. No extra claim shall be admissible during execution of work on this account.
M&L for applying two coats of elastomeric and protective anticarbonation coating, on concrete/masonry surfacs over a coat of silane-siloxane primer as per manufacturer's instructions complete all as specified and directed. (Make- Dekguard E2000 of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
M&L for grouting of voids/cracks with high strenth epoxy resin grout as per manufacturers instructions complete all as specified and directed. (Make- Conbexta EP 10 of FOSROC or equivalent product in other makes specified in tender) (NOTE: The item shall be executed if any voids/cracks are found during execution/removing of concrete mortar from the surface).
Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for and removing the rubish off the premise. complete all as specified and as directed..
M&L for formwork to side of pillars, posts, struts, piers, columns for rough finished surfaces complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves etc for rough finished surfaces complete all as specified and directed.
M&L for reinforced cement concrete M-30 (design mix) using 20 mm graded aggregates in chajjas and similar works etc. complete all as specified and directed.
S&F Mild steel TMT bars 10 mm dia and over, cut to length and bent to shape as reqd, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed .
S&F Mild steel TMT bars 6-8 mm dia , cut to length and bent to shape as reqd, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed .
Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. incl necessary formwork complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 150 mm thickness (above or below groud level) complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:4 complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 complete all as specified and directed.
M&L 15 mm thick rendering in cement mortar (1:6) to brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 20 mm thick plastering in two layers, 10 mm + 10 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (@ 200 ml per bag of cement or as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".
M&L for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, with and including necessary scaffolding, complete all as specified and directed.
Supply only liquid water proofing compound all as specified and as directed.
Material and Labour for applying three coats of white wash to new plastered surfaces in ceiling including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of white wash to old decorated surfaces of ceiling including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy sports etc) complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new plastered of wall surfaces and applying two coats of acrylic distemper over a coat of alkali resistant primer applied over 3 mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment on walls including cleaning, watering to make the surface clean and free from dust and applying 1.5 mm thick wall putty for smooth finish and finishing with two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparing newly plastered surfaces of wall and applying Two Coats of weather proof exterior emulsion paint over a coat of alkali resistant primer over and including 2 mm thick exterior wall putty complete all as specified and as directed.
M & L for applying one coat of weather proof exterior emulsion paint over a coat of alkali resistant primer on cornices, fins, fascia etc incl preparation of old surfaces complete all as specified and directed.
M & L for plain cement concrete (1:5:10) type E-2 using 40 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.
M&L 75mm thick Cement Concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in Plinth Protection, / sub bases etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in mass concrete complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 (using 20mm graded stone aggregate) in Foundation filling and mass concrete complete all as specified and directed.
M&L for 25 mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base of floors etc, finished evan and fair complete all as specified and directed.
M&L 25 mm thick pre polished coloured chequred tiles of size 400X400 jointed and pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over and including 25 mm thick screed bed in cement mortar 1:6 completed all as specified and directed.
S&F 25mm thick pre-polished decorative cement concrete tiles of size 300mm x 300mm, as in flooring over and including 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, as directed by Engineer-in-Charge.
S&F 15mm thick pre-polished decorative cement concrete tree guard tiles of approved size, design and colour laid on vertical surfaces over and including 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed.
S&F glazed coloured ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.
S&F non-skid ceramic coloured tiles (square/ rectangular), minimum 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20 mm thick in cement mortar 1:4 complete all as specified and directed.
S&F non-skid ceramic tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles for verticle surfaces as in skirting ,dados and riser of steps laid over and including 10mm thick bedding in CM 1:3 complete all as specified and directed .
M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Taking up or down existing 15mm dia steel tubing and connection and keeping saide for re-fixing or removal to store complete all as specified and directed
Taking up or down existing 20mm dia steel tubing and connection and keeping saide for re-fixing or removal to store complete all as specified and directed
S&F 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
-ditto all as per item No. 56.00 here-in-before but 20 mm bore
S&F in repair gun metal gate or globe valve, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe complete all as specified and directed.
S&F Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: SQT-512KN / Ess Ess, Cat No: T-105A / PRAYAG, Cat No: 7209 /SOMANY, Model: ETHER)
S&F, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : PRAYAG, Cat No: 6818 / ESSCO, Cat No: COS-103069/ ESS ESS, Cat No : PT-332/ SOMANY, Model: ETHER)
S&F in repair Chromium plated brass Angular stop cock concealed type incl concealed body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: DLX-526 / PRAYAG, Cat No: PR-144 / SOMANY, Model: ETHER / JAINKO, Cat No: AVJ-1)
S&F in repair 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D)
S&F chromium plated brass over head shower rose with arm, with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : Essco, Cat No: ALE-536A & EOS-542N / ESS ESS, Cat No: SA-101 & OH-202 / PRAYAG, Cat No: BS-73 / SOMANY, Model: ETHER)
S&F Vitreous China Wash Hand Basin 550mm x 400mm in size, white, (Flat Back or Angle Back Type) making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : CERA, Cat No. S2040119/ HINDWARE, Cat No. 10100/ PRAYAG, Cat No. 4645/ ASIAN PAINTS, Cat No. PN-03-X )
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : ESS ESS, Cat No: RO-101 / PRAYAG, Cat No: 6702 / Essco, Cat No: SQT-507KN / SOMANY, Model: ETHER)
S&F in repair 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins, sinks etc complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as spproved by GE)
S&F 40mm dia PVC pipe with bend complete fixed on walls, ceilings and floors including PVC clamps, bends sockets etc as in repair complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc including PVC seat cover complete all as specified and directed. (Make: Parryware, Model : Elite / ESSCO, Model: ELEMENTS / CERA, Model: Conventional / HINDWARE, Model: SLICK / ASIAN PAINTS, Model: TREND / ) (NOTE: Cost of seat cover, hinges etc shall be deemed to be included in the quoted rate)
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : CERA, Cat No: S3010109 / HINDWARE, Cat No. 20042 / PRAYAG, Cat No: 4054 / ASIAN PAINTS, Cat No: WM-32-X / ESSCO, Cat No: ECS-WHIT-451)
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
S&F in repair 100 mm dia cast iron Nahani trap including jointing to waste pipe fixed in cement concrete complete all as specified and directed.
S&F grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed. (MAKE : PRAYAG, Cat No. 111 or equivalent model in JEXON / POLYTUF / SHAKTI)
Supply and Fixing in repairs, Tubular towel rail (Normal quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : Essco, Cat No : AEC-1111N / PRAYAG, CaT No: BA-40 / ESS ESS, Cat No : AC-701 / SOMANY, Model: ETHER)
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.
Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.
Taking down shutters any description exc 1.0 but not exc. 2.0 sqm each and refixing in the same opening after necessary repair like easing etc complete all as specified and directed.
M&L 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
Supply and fixing Factory made solid PVC door frame (chowkhat) of size 50mm X 47mm, made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, Supply and fixing in opening as per specification & drg as per manufacturer instrutions complete all as specified and as directed.
S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed.
S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood glazed & skleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as directed.
M&L 19/20mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative of sheds and other side balancing white lamination. All edgs properly seald with 5mm thick 2nd class hard beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick as in repair complete all as directed.
S&F 100 mm long aluminium butt hinge with mild steel hinge pin anodised type C-21 for PVC door complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, size 100 mm complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, size 75 mm complete all as specified and directed.
S&F Aluminium handles, cast type, anodised, 150 mm complete all as specified and directed.
S&F Extruded aluminium alloy handles, fabricated type, anodised, 100 mm complete all as specified and directed.
S&F 100 mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F Extruded aluminium alloy handles, fabricated type, anodised, 100 mm complete all as specified and directed.
S&F for Aluminium anodised barrel tower bolts of extruded sections, 125 mm long complete all as specified and directed.
S&F for Aluminium anodised barrel tower bolts of extruded sections, 200 mm long complete all as specified and directed.
S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed.
S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F stainless steel wire cloth of 0.65mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, as in repairs, complete all as specified and directed.
S&F sheet glass 4 mm thick, ordinary quality, and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane including Hacking out old broken glass all as specified.
S&F Bands, straps, supports or stays for rainwater, ventilating, pipes, including bolts, if required hooks(stays ) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts, clamps, hold fasts, plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts two way and three way straps plate washers and similar small articles conforming to fe-290 Gde E-165 complete all as specified and directed.
M&L for cutting holes in brick wall exceeding half brick but not exc one brick thick walls for inserting hold fasts for mild steel grills and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20 mm graded aggregates) including necessary formwork and making good surfaces as per existing finisjhes complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
Taking down unserviceable steel windows/ ventilators, of any size incl grill/guard bars and removing from site complete all as specified and directed.
S&F steel window with side hung shutters including necessary hinges with steel handles and steel peg stay complete with glazing bars devotailed or welded, complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, with glazing bars including one shop coat of priming, complete all as specified and directed.
S&F 3.0 mm sheet glass ordinary quality in wooden frame with putty/beads in square n. exc 0.5 Sqm in each pane complete all as specifed and directed
S&F 4.8 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with oil putty complete all as specified and as directed by the Engineer-in-Charge
M&L in repair mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
S&F in repairs Chromium plated 25mm dia chromium plated brass curtain rod with fixing brackets, stops, rollers etc of approved design complete all as specified and directed. (NOTE: Brackets will be measured and paid separately)
Supply and fixing Brass bracket for curtain rod decorative type fixed as in repair complete all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches of 150 mm internal dia complete all as specified and as directed.
S&F Cast iron (Spun Pipes) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed.
S&F CI Spun bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.
S&F 100 mm bore cast iron (Spun) bends with access door (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed.
S&F 100mm bore cast iron Spun cowls complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F 110mm outer dia PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and as directed by the Engineer-in-Charge.
S&F 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed.
S&F in repair soap dish, PTMT body complete all as specified and directed. (Make : PRAYAG, Cat No : 195 or equivalent make as approved by GE).
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed. (NOTE: GI long screw shall be measured and paid seperately)
S&F 20 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)
M&L for uprooting of tree from walls of bldgs up to extended root and spraying of muratic acid of required quantity complete from any location of bldg, up to four storey height and making good disturbed surface with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20 mm graded stone aggregate etc complete all as specified and directed.
SCHEDULE 'A' PART-II (ELECTRIFICATION WORKS) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for reuse or removing from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.
Material and labour for point wiring with 1.5 sqmm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor (1100 V grade) cable drawing in and including PVC rigid concealed conduit medium grade, 20mm dia, ISI marked, with all conduit fittings and accessories, for one light/fan/call bell point controlled by one switch alongwith FR PVC insulated unsheathed cable with multi stranded copper conductor of size 1.5 sqmm and connected to earth dolly including fixing of 1.25 mm thick MS sunken terminal box suitably flushed to wall with 3.0 mm thick plastic laminated/ebonite sheet cover fixed with brass screws & cup washer complete all as specified and directed. NOTE :- (i) Where tube light fittings is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling. (ii) Point wiring shall be measured from switch board to outlets only. Main circuit wire of the switch board shall be measured & paid seperately.
All as per item No. 126.00 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No 126.00 here-in-before but for one 5 pin 5/6 amps multisocket outlet point in independent board (concealed type point wiring with terminal box).
All as per item No 126.00 above but using 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent. (concealed type point wiring with terminal box).
S&F switch piano flush button AC 230 V Single pole 5/6 Amp one way complete all as specified and directed.
S&F socket outlet 2-in-1, 3 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.
S&F switch socket combination, 5 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.
S&F socket outlet 6/16 Amps, 6 in 1, flush type complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type universal complete all as specified and directed.
S&F ceiling rose surface, polycarbonate/bakelite, three terminals complete all as specified and directed.
S&F electronic type stepped speed regulator, 100 watts, AC 230 Volts for ceiling fan, complete all as specified and directed.
S&F bell push, flush type one way 240 Volts, 5 amp complete all as specified and directed.
S&F Bell, AC, 230 volts, single pole complete all as specified and directed.
S&F lamp holder with back plate suitable for batten/pendant fittings or to be mounted on walls, complete all as specified and directed
S&F in repairs surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size incl taking down existing fitting complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation
All as per Item No. 139.00 above, but of 1 X 9/10 Watt capacity in polycarbonate housing with lumen output not less than 105 lumen per watt
S&F in repairs LED Street Light fitting, of 35/36 W capacity, 230Volys AC Out door type, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver, top opening driver cover, IP 65/66 ingress protection, impact resistance of IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power Factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (for 45 watt & above) (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation
S&F in repair Bracket/Arm suitable for street light fittings, made out of 32 mm bore (light grade) GI pipe length not exceeding 1.5 metre long, fixed with 02 sets of flat iron clamp of size 25mm x 5 mm, with bolts, nuts and washers of suitable size including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer incl taking down existing bracket complete all as specified and as directed by the Engr-in-Charge.
Taking down ceiling fan/exhaust fan of any make, model or sweep after disconnecting from ceiling rose, taking the fans to workshop, overhauling by greasing of bearing, varishing of coil and heating, cleaning, removing old paint by scrapping, filling cavities with approved filler and applying two coats of synthetic enamel paint of approved shade by spray painting, marking of MES No. with stencil, assembling and hanging/fixing the fans at site complete including connections with PVC insulated 3 core copper flexible wire of size 1.0 sqmm of length not exceeding 1.5 metres complete all as specified and directed.
S&F in repair Capacitor 2.5 mfd, 230 Volts, AC , 50Hz complete all as specified and directed.
S&F in repair MS down rod of size 15/20 mm dia and length 1' for ceiling fan including electric connection, nut, bolt and clamp complete all as specfied and directed.
S&F of rubber reel 1.7/2.5 insulator for Ceiling fan suitable for 1200/1400mm sweep complete all as specified and directed.
S&F in repair MCCB (premium range), 4 pole, 160 Amps, 25 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed. (MAKE : L&T, Cat No: CM90642OOMO / LEGRAND, Cat No: 420057/ HAGER, Cat No: HHS161DR / SCHNEIDER, Cat No: LV426268 /ABB, Cat No: 1SDA067410R1/ C&S Cat No. CSE1M125ATM4P-* )
S&F in repairs MCCB enclosure frame Four pole suitable for mounting of MCCB of rating 100-200 amps including spreader terminal kit and making fixing arrangement on wall complete all as specified and directed.
S&F 3 phase 4 way busbar chamber with mild steel CRCA sheet 1.6 mm thick duly powder coated with copper strips of rating 200 Amps, 415 volt fixed on DMC bus bar insulator, in repair, complete all as specified and directed. (Make: ANCHOR Cat No: 98380 / JUVAS, Cat No: UJSBB200A / HAVELLS, cat No: IHBC020004 or any other reputed make as approved by GE)
S&F in repair Double Door, Sheet Metal Enclosure for DBs (Premium Quality), for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / LEGRAND, Cat No: 5076 11 /ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D equivalent model in C&S / HAGER)
S&F in repair SPN DB, IP 43 protection, double door (Premium Quality), 240 volts, 4 way, with 100 Amps copper Bus Bar complete all as specified and directed. (MAKE : L&T / LEGRAND/ ABB / SCHNEIDER/ C&S/ HAGER)
S&F MCB (Premium Range) 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.
S&F MCB (Normal Range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.
S&F MCB (Premium Range) 'C' series, SPN, 40-63 Amps, breaking capacity 10KA complete all as specified and directed.
S&F MCB (Normal Range) 'C' series, SPN, 40-63 Amps, breaking capacity 10KA complete all as specified and directed.
Supply and fixing single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 'C' Curve, 10 KA including all accesories complete. (MAKE : LEGRAND, Cat No. 607843 / L&T, Cat No. DBMPS220SD / SCHNEIDER, Cat No. A9HMS220/C&S, Cat No: CSDBPSSPN020 or Equivalent Model in ABB) (NOTE : Enclosure & MCB shall be same manufacturer. MCB will be measured and paid seperately)
Taking down of old Submain wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.
M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)
M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)
M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth wire 4 mm dia (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and dismantling of existing unsv earthing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.
MS AP CONSTRUTION AND CO
DEB AND COMPANY
PRABIR TRADERS
SOMANI BUILDERS
S.M.CONSTRUCTIONS
UNITED ENGINEERS
SHEIKH ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .