REPAIRS TO KITCHEN BATH TOILETS INTERNAL WATER SUPPLY SUNKEN FLOOR TILING AND PLUMBING WORKS IN CERTAIN MD AND OTM ACCN AT AUNDH MIL STN UNDER GE MH AND RH KHADKI

Amount

Taking down cement or cement lime plaster of any description all as specified and directed .

M& L for rendering of external surface 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including uprooting/cutting of vegetation growth (maximum height upto three stories) using WPC @ 3% by weight of cement all as specified and directed. Note: WPC will be measured and paid seperately

Supply only intergral water proofing compound.

M & L applying two coats of cement base paint to newly plastered surface of wall including preparation.

M & L for washing rubbing and stopping colourd old surface upto any height, by scraping down with steel wire brushes of smoke spots, moulds, efflorescent salts and cutting/uprooting vegetations growth, including filling of spots with POP and applying of two coat of cement base paint all as specified and directed.

M&L for rendering of internal surfaces 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) all as specified and directed.

M&L for of preparation of newly plastered surfaces of wall and applying two coats fof oil bound distemper over a coat of alkali resistant primer finished even and smooth, all as speciified and directed

M&L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP and applying two coats of white wash on old surfaces of walls all as specified and directed.

M&L for providing water proofing plaster at the junction of wall and slab at chajjas , lintels, etc of average thickness 20mm in CM (1:3) with water proofing compound , finished even and smooth without using extra cement all as specified and directed. Note :- Rates shall deemed to be inclusive of Cost of water proofing compound.

M&L for rendering 10 mm thick on concrete surface in CM 1 :4 as in ceiling etc. all as specified and directed.

M&L for preparation of new plastered surface and for applying three coats of white wash on ceiling all as specified and directed.

M&L preparation of old surfaces applying of one coat of white wash on ceiling all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm in area and refixing in the same opening fitting to chowkat complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding/ complete and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No 16, above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M&L glazed ceramic tiles (350x250x7mm or 450x300x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm thick rendering in CM 1:4, all as specified and directed.

M&L glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L for 25mm thick, levelling course of cement concrete type B-0 , 1:2:4 (12.5mm graded aggregate) as in flooring for laying tiles all as specified and directed.

M&L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection, call as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid or without and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed.

M&L 25mm Granite (of any type) work (table rubbed and polished) in steps, jambs, cills, for counter tops and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 20mm Screed bed in CM 1:4, all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, all as specified and directed.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

All as per item No 30, above but re-fixing only with new fittings where requied all as specified and directed.

Cutting chases, pinning in PCC block/brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections and S&F 20mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and directed

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

Supply & fixed in repairs 15mm bore CP bib taps, cast copper alloy, with capstan heads,chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Make :Seiko/Cera/Parko or equivalent

S&F in repair bib cock with nozzle fit for washing machine pipes screwed for 15mm dia at one end complete of Make :Seiko/Cera/Parko or equivalent.

S&F in repairs two way bib tap 15mm chromium plated of Make :Seiko/Cera/Parko or equivalent.

Supply & fixed in repairs 15mm bore stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure, screwed both ends for iron pipe or for unions.

Supply & fixed in repairs 15mm bore angular stop valves, cast copper alloy, fency type, chromium plated screwed down high pressure , screwed both ends for iron pipe or for unions.

S&F in repairs, CP brass, chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repairs 15mm dia pillar taps, CP brass, chromium plated with capstan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts, all as specified and directed. Make :Seiko/Cera/Parko or equivalent

S&F in repairs 15mm bore CP central hole basin mixer without popup waste system with 450mm long braided hoses fittings complete all as specified and directed ( Make :Seiko/Cera/Parko or equivalent)

S&F in repairs 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed all as directed (Make : Sieko or equivalent)

S&F in repairs Sink Mixer with swinging spout (Wall Mounted Model) with connecting legs & wall flanges (Make :Seiko/Cera/Parko or equivalent)

S&F in repair toilet paper roll holder, complete all as specified and directed. Make :Seiko/Cera/Parko or equivalent)

S&F in repairs rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I Make:SINTEX/Polycon/Ashish Plast or equivalent) Note : Rates includes for removing old water tank of any description.

All as per item No 46 but 1000ltrs capacity.

All as per item No 46 but 2000ltrs capacity.

M & L for 75mm PCC 1:4:8 type D2 ( 40 mm graded aggregates) as ins sub base of floor.

M&L for Prepolished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment including 20mm thick screed bed in CM 1:6 all as specified and as directed.

S/F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs corner glass shelf with 200mm dia or above with stainless steel hinges and chromium finish holders/wall of approved make complete all as specified and directed by Engr-in-Charge

S&F in repairs Towel Ring (of approved pattern) complete all as specified and directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. (Make :Seiko/Cera/Parko or equivalent)

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover complete , all as specified and directed.

S&F in repair Vitreous China wash down water semi pedestal pattern (Anglo indian pattern) white (excluding fixing bolts flushing cistern) including flush pipe, seat cover suitable and connection to drain (or outgoing pipe) flushing pipe, anti-syphonage pipe complete , all as specified and directed.

S & F in repairs plastic seat cover suitable for anglo indian EWC with hinging device all as specified and directed.

S&F in repairs toilet paper holder brass chromium plated fixed to wall with brass screw complete (Make :Seiko/Cera/Prayag or equivalent).

Supply and fixing in repairs CP soap dish holder complete all as specified and directed. (Make :Seiko/Cera/Prayag or equivalent).

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

All as per item No 63 above but size 495mm x 420mm bowl size 410mm x 330mm x 160mm and without drainage board complete all as specified and directed. ( Make : Anjali/Nirali or equivalaent approved quality)

S&F in repair plate rack made of stainless steel 1mm thick and overall size 915mm x 915mm x 255mm, inlcuding taking down old /unsv complete all as specified and directed.

All as per item No 65 above but size 750mmx600mmx250mm complete all as specified and directed.

Disconnecting existing tanks setting aside for cleaning and cleaning of Serviceable PVC water tanks exc 250ltrs and n.exc 500ltrs, removing all scales and dirt etc from tank and from mouth of circulating pipes etc duly taking down the existing service tank and re-fixing the same in its position complete all as specified and as directed.

All as per item No 67 above but water tanks exc 500ltrs and n.exc 1000ltrs complete all as specified and as directed.

All as per item No 67 above but water tanks exc 1000ltrs and n.exc 2000ltrs complete all as specified and as directed.

S&F in repairs 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)

All as per item No 67 but Fixing only complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius bore of 75 mm all as specified and directed.

All as per items No 72 here in before but 110mm bore etc all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, fixed to wall all as specified and directed.

All as per items No 72 here in before but 110mm bore etc all as specified and directed.

S&F in repairs PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

All as per items No 74 here in before but 110mm bore etc all as specified and directed.

S&F in repair grating square or rectangular 150mm size of PTMT (minimum weight 100 gms) all as specified and directed.

S&F in repairs kitchen sink coupling complete all as specified and directed

S&F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.

S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed

S&F in repairs Cast iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints,fixed to wall complete.

S&F in repairs Cast iron floor trap 100 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 , all as specified and directed.

M&L for waterproofing treatment to RCC sunken slab as specified below. Make: PIDILITE or equivalent.

(a) creating fillet coving of 50mmX50mm with polymer modified mortar using cement : sand : URP

(b) Applying PU sealant at the junction of pipes and the RCC sueface.

(c) Apply 1st coat of two component cementitious coating, over the surface and taking the coating on the walls over the angle fillet / watta portion.

(d) Lay 40gsm geotextile fleece at the watta portion.

(e) Apply 2nd coat of two component cementitious coating, over the first coat and taking the coating on the walls over the angle fillet / watta upto 1M after 6 -8 Hrs.

(f) Applying 12mm thick plaster in C:M 1:3 with waterproofing compound conforming to IS 2645:2003 @ 250ml per bag of cement.

M & L PCC (1:5:10) using 40mm graded aggregate as in mass concrete or as in sunken floor complete all as specified & directed

M&L for removing peepul trees or any type of trees/vegetations with root from wall, roof slab, over head tank portions, shafts, rain water pipe portions etc, and applying suitable chemical to the affected area to arrest further growth and making good damaged portions with PCC 1:2:4 all as directed. Note : Safety precautions like rope, safety belts, helmets , ladder etc shall be responsibility of contractor

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

Making hole and M&L for fixing thr metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, or equivalent , curing , cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.

M&L for water proofing treatment of External walls, chhajjas DFT: 110 microns by applying two coats of elestromeric coating Raincoat, material covering capabity 3 Sqm per litre in 2 Coats without dilution & 1 coat of efflorescent resistant primer 10sqm/litre/coat after cleaning the surface throughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications and directions of Engr-in-Charge Make :- Raincoat shall be of PlDlLlTE or equivalent. The product shall have following properties: Elongation > 100% as per ASTM D 412, Tensile strength : 2.5 Mpa as per ASTM D 412, Water Resistance conforming to SS 500, Crack bridging ability conforming to Class A4 as per EN 1062 Part 7, Positive hydrostatic pressure > 7 bar as per DIN 1048, Anti-carbonation property complying EN 1062 Part 6, RCPT conforming to ASTM C 1202.

S&F in repair of vitreous china bowl type urinal flat back size 465 x 355 x 265 mm white with grating and union for discharge including flush pipe complete all as specified and directed.

M&L Coloured Vitrified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No.93 above but as in skirting /dados including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M/S K.D.MATE (BID ID -3090278)

Sunrise Traders (BID ID -3088458)

A B S ENTERPRISES (BID ID -3089491)

S.R.M.K Enterprises (BID ID -3088714)