REPAIRS TO CHAJJAS, PARAPET WALL, SUNKEN FLOOR, PLASTERING AND MISC B/R ITEMS AT DRDO ESTATE PASHAN, PUNE

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc including necessary scafolding height upto 15m complete all as specified and directed.

Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC, including necessary scafolding height upto 15m Complete all as specified and as directed by Engineer-in-Charge. (wpc will be measured and paid seprately)

Material and Labour for Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:6, including necessary scafolding height upto 15m Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Rendering on ceiling, 5mm thick on fair faces of concrete surfaces in cement mortar 1:3, including necessary scafolding height upto 15m Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon addesive @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including necessary scafolding height upto 15m complete all as specified and directed.

Material and Labour for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistance primer on wall including necessary scafolding height upto 15m complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of Oil bound distemper, including necessary scafolding height upto 15m complete all as specified and directed.

Material and labour for Cutting cracks to V section in existing roof or terrace, cleaning out and filling solidy with a coat of approved Crack Filling agent like Dr Fixit Crack X or Dr Fixit Crack X shrink Free or Dr Fixit Pidicrete URP with respect to the width of crack, complete all as per manufacturers instructions, complete all as specified and directed by Engr-in-charge.

Material and labour for complete removal of existing treatment Cutting out cracks to V section in existing plastered walls, cleaning out wetting, grouting with suitable crack Filling agent like Dr Fixit Crack X or Dr Fixit Crack X shrink Free or Dr Fixit Pidicrete URP with respect to the width of crack, complete all as per manufacturers instructions, including necessary scafolding height upto 15m, complete all as specified and directed by Engr-in-charge.

Material and labour for damp proof waterproofing treatment on external walls as per following procedure on old plastered surface or newly plastered surface complete all as specified and directed. (a) . Pre Painting Steps Surface shall be prepared be free from any loose paint, dust or grease. Growth of Fungus, Algae or moss and cleaned by wire brushing and water. If the Underlying surface exhibits chalkiness, in spite of surface cleaning then use Asian Paints Smartcare Primero. For filling cracks up to 3mm use Asian Paints Crack Seal.* In case of dents and holes use Asian Paints Trucare wall putty suprema. (b). Paint Applicaton Process 1 Coat of Smartcare Damproof (Undiluted)*1 st Coat of Apex Ultima Suprema (40% Dilution)*2nd Coat of Apex Ultima Suprema (40% Dilution) Complete all as specified as per manufacturer's instruction and Complete all as specified and directed.

Material and labour for disconnecting existing PVC water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouthts of circulating pipes etc and hoisting if required reconnecting and refixing in position capacity exceeding 250 litre and n exc 500 litres, complete all as specified and as directed by Engineer-in-Charge.

All as per Item No 11 here in before but of 1000 litre capacity.

Taking down existing roof treatment in any position with bitumenous felt including backing cement plastered of any thickness in roofs (other than ground floors), beams, chajjas, staircase etc and removing the rubbish to a distance exceeding 250 metre and n. exc 500metre deposited where directed complete all as specified and as directed by Engineer-in-Charge.

Dismantling of exisiting old padding concrete of any thickness over the RCC slab other than beams, chajjas, staircase etc by chipping of with proper tools viz chiesel and with applying reasonable force so as to avoid any damages to exiting RCC roof slab, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling / padding course on roof slab, chajjas, projections on similar surfaces existing with slope, kerbs, rounded or chamfered edges, making the surface even and smooth without using extra cement, including using liquid water proofing compound, Complete all as specified and as directed by Engineer-in-Charge. Note: supply of Integral water proofing compound will measured and paid seperately.

Material and labour for 10mm thick cement plaster in CM 1:4 over PCC (while concrete is green) using approved liquid water proofing Note: supply of liquid water proofing compound will measured and paid seperately and dosage as per manufacturer instructions) complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compoud as approved by GE complete all as specified and directed.

Supply and fix 3mm thick APP pre-fabricated membrane with and including non woven polyester matt central core of 160 gsm (min) impregnated and coated on both sides with and including layer of APP modified bitumen and finished with and including micro-perforated heat fusible polythene film on both surfaces over and including 0.3 litres / Sqm bituminous primer confrming to IS-3384 and applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 litres / Sqm each layer complete as per manufacturer's instructions and all as specified and directed . The weight of APP membrane shall not be less than 3.5 Kg / Sqm and laid over and including primed surface by using LPG/Butane torch and apply uniform pressure with roller. The overlap of membrane shall be 100 mm on sides and 150mm on end laps and complete all as specified and directed. Notes: (i) The work shall be executed only through authorised applicator of manufacturer as approval by GE. (ii) Contractor has to submit guarantee of treatment for 10 Years. (iii) Rates are inclusive of cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm Complete all as specified and directed.

Demolition of cement concrete above ground floors exc 15 cm thickness as in sunken floors or in similar works complete all as specified and directed

Material and labour for water proofing treatment of sunken floor by applying (a)15mm thick plaster in cement mortar 1:4 with WPC over (b) application of cement slurry mixed with and including acrylic based polymer modified cementitious composite compound coating in two layers as per direction of Engineer inCharge. (C) Over and above 200 micron thick polymer film should be pasted with the help of adhesive after treatment, complete all as specified and directed. Note: (i) make -Dr Fixit, Asian paints ,Fosroc and M/S Sikka (ii) The work shall be executed only through authorised applicator of manufacturer

Material and labour for Cement concrete in foundations, filling and mass-concrete 1:5:10 Type E2 (Using 40mm Graded crushed stone agrregate) as in sunken floors complete all as specified and directed

Material and labour for 40mm thick Cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) as in floor.complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and as directed by Engineer-in-Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and jointed in cement mortor or bedding, Complete all as specified and as directed by Engineer-in-Charge.

Demolition of Cement Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level), Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in sub base, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections/ hard standing path etc finishing the surface without extra cement even and smooth, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for coloured Non Skid ceramic tiles 7 to 8mm thick polished(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for double charge Vitrified ceramic tiles 8mm to 9mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for double charge Vitrified ceramic tiles 8mm to 9mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 10 mm thick in cement mortar 1 : 3 as backing coat, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Light coloured Glazed ceramic tiles in vertical surface as in skirting or dado 300 mmX 450 mm X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :3 as backing coat, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite, laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Machine cut cudappa stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Rounding edges of stone slabs one edge, such as in steps, cooking platform,and other similar work, complete all as specified and directed.

Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia complete all as specified and directed.

Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to store complete all as specified and directed.

supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wallscomplete all as specified and directed.

supply and fix 110 mm dia PVC (SWR) bend with acess door complete all as specified and directed.

supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wallscomplete all as specified and directed.

supply and fix 75 mm dia PVC (SWR) bend with acess door complete all as specified and directed.

Supply and fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain and plug and porcelain stopper fixing on existing brackets, including supply and fixing of flexible waste outlet pipe of 32 mm dia of required length, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight, 45gms, suitable for vitreous china wash basin, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 675 grams), Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts (excluding flushing cistern and flush pipe) including pan seat cover, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China squatting pan, `Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15mm bore Fancy type chromium plated Bib taps, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams), Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore chromium plated Angle cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions (minimum weight 400 grams), Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repaires sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair stainless steel plate rack of size 750mm x 1000mm made out of 1mm thick stainless steel sheet of grade 304 fixed all as per manufacturers instructions, Complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs 2 in 1 mixture valve of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed. complete all as specified and directed by Engineer-in-Charge. Note: Model and design as approved by GE.

Supply and Fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs swivel shower of chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,any size ,including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge Note: Model and design as approved by GE.

Supply and Fix toilet paper holder of chromium plated fixed to walls with chromium plated brass screws. complete all as specified and directed by Engineer-in-Charge. Note: Model and design as approved by GE.

Supply and Fix in repair two way bib cock of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as specified and directed by Engineer-in-Charge. Note: Model and design as approved by GE.

Supply and Fix 1.2metre long CP health foucet including holder fixed to wall complete all as specified and directed by Engineer-in-Charge.

Dismantaling water tanks exceeding 250 litres and not exceeding 500 litres complete all as specified and directed by Engineer-in-Charge

Dismantaling water tanks exceeding 500 litres and not exceeding 1000 litres complete all as specified and directed by Engineer-in-Charge

Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer-in-Charge.

Supply and fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer-in-Charge.

Taking out old chocked GI pipe and connections, including cleaning for refixing or removal to store for the following of sizes from trenches, walls, ceilings, floors etc :- (a) 20 mm bore

(b) 15 mm bore

Supply and fix GI tubing medium grade with and including necessary fittings complete to walls and ceilings or laid in floors of the following sizes, complete all as specified and directed. (a) 20 mm bore

(b) 15 mm bore

Material and Labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as in stone / concrete block walls, complete all as specified and directed.

Supply and fix in repairs PVC body box type cabinet mirror of size 450mm x 600mm complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc including all pipe fittings complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames not exceeding 1.50 Sq m each with shutters (without taking off shutters from the frame) and removing from site, complete all as specified and directed.

Taking down shutters only of any description exc. 1 Sqm but n. exc. 2 Sq m each and removing from site, complete all as specified and directed.

Supply and fix factory made solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement.complete all as specified and directed.

Supply and fix extruded aluminium alloy handles, fabricated type anodised 125 mm size.complete all as specified and directed.

Supply and fix 125 mm long aluminium anodised barrel tower bolts of extruded section.complete all as specified and directed.

Supply and fix 100 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws complete all as specified and directed.

Supply and fix Aluminium powder coated ventilators partly fixed and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pin headed figured glass louvers with and including blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with and including minimum 6 Nos of suitable size galvanised screws with PVC plug etc, Complete all as specified and as directed by Engineer-in-Charge. Note : The rate of aluminium work should be inclusive of all filling gaps in all sides to aluminium frame work with plaster / putty as per site condition.

Supply and fix in repairs Aluminium powder coated sliding windows three track consists of 03 Nos of shutters i.e 02 Nos of Glazed shutters and 01 No of gauzed shutter with size of sections of styles and rails all as directed by Engineer-in-Charge NOTE :- (i) All aluminium section including galzing clips, snap beading, joining cleats, rubber packing screws etc as required are deemed to be including in the rate quoted. (ii) Thickness of powder coating minimum 50 micron. (iii) Glass & wire cloth shall be measured and paid separately under respective items (iv) The rate of aluminium work should be inclusive of all filling gaps in all sides to aluminium frame work with plaster / putty as per site condition

Supply and fixing 4.0mm thick sheet glass glazing in aluminium window, ventilator shutters and partitions etc, (weight not less than 10Kg/ Sqm) including consumables complete all as specified and directed by Engr-in-Charge.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 25mm bore stainless steel Gde 304 curtain rods approved by GE, complete all as specified and directed.

Supply and fix in repairs stainless steel fancy type brackets suitable for 25mm dia curtain rods approved by GE, complete all as specified and directed.

cleaning of any type of roof area exceeding 100 Sqm but not exceeding 300 Sqm, by removing leaves, vegatation growth, debris and accumulated mud by washing brushing or by any means without hampering the water proofing membrane(if provided) from permanent roof not accessible including cleaning of rain water pipes of any description and removing debries/spoil from site and depositing the same to low lying area exceeding 0.5 km and not exceeding 1.5km complete all as specified and directed.

All as per item No 89 here in above but area of roof exceeding 300Sqm but not exceeding 500 Sqm, complete all as specified and directed.

Material and labour for removing any type of shrubs/vegetations with root from wall, roof slab, over head tank portions, shafts, rain water pipe portions etc of any height and applying suitable chemical to the affected area to arrest further growth and making good damaged portions with PCC 1:2:4 complete all as specified and directed. Note : Safety precautions like rope, safety belts, helmets , ladder etc shall be arranged by the contractor at his own cost and rate quoted is deemed to included for the same.

Please Enable Macros to View BoQ information