REPAIR TO SUNKEN FLOORING PLASTERING AND PLUMING WORK FOR WPT BATHROOM, TOILET, KITCHEN AND CLEANING OF WATER TANKS, RAIN WATER PIPING, FLOORING , PLASTERING, JOINERY AND PERIODICAL SERVICES FOR OTM AND MD ACCN AT 213 TC UNDER GE NAGROTA

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for hard core of broken bricks boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) as in sub floor mixed with 3% WPC of cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for 10mm thick cement plaster in CM 1:4 mixed with water proofing compound materials complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L an elastic liquid applied creack bridging 2 pack acrylic polymer modified cementitious water proofing coating system primer coat sika top seal 109 Hi primer consumption primer coat 0.2 kg/sqm, base coat sika top seal 109 Hi consumption base coat 0.7 kg/sqm . Top coat sika top seal 109 Hi consumption primer coat 1.5 kg/sqm density 1.6 kg/ltr bond strength 2.0 n/mm or nitco proof 100 & 120 of MS fosrock chemical (priming coat of Nitoproof 100 & one subsequent coat of nitco proof 120) complete all as specified and directed

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including rendering 10 mm thick plaster in CM 1:4 on brick work complete all as specified and directed.

M&L glazed ceramic coloured tiles 300x 200 x 7 mm thick as in vertical surfaces such as dado,skirting set jointed in neat cement slurry including pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 on brick work complete all as specified and directed.

Non skid ceramic colour tiles 7 to 8mm thick ( square/rectangle) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for for laying floor finishes complete all as specified and directed

M & L for non skid ceramic colour tiles 7 to 8 mm thick ( square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 15 mm thick screed bed or beeding layer in CM 1:4 for laying floor finishes complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water complete all as specified.

Supply only integral water proofing compound

M&L for 15 mm thick rendering on on fair faces of brick or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

M&L for preparing of new plastered or un plastered surfaces and applying two coats of white wash on wall complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed.

M&L for 15 mm bore GI pipe medium grade with all fitiing and fixed to wall and ceiling or laid in floor, complete all as specified and directed.

M&L for 20 mm bore GI pipe medium grade with all fitiing and fixed to wall and ceiling or laid in floor, complete all as specified and directed.

M&L for cutting chases pinning in making good ro facings where requried and pointing in cement mortar 1:3 to ends or edges of landings, steps cills cahses for concealed water tubing exc. 10 cm but not exc 20 cm girth complete all as specified and directed

S & F in repairs 10 Ltrs capacity PVC valveles, symphonic action type, flushing cistern low level, white with inlet, ball valve, float and handle including bracket of MS angle of size 25mm x 25mm x 3mm, 30 cm long in PCC 1:2:4 type B-1 block of size 10cm x 10cm x 10 cm on wallas etc, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, flat back, size 550X400 mm including waste pipe, bracket and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug, complete all as specified and directed

S&F in repair vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest (excluding flushing cistern) including provn of PCC or lime concrete bedding and connection to trap and flushing pipe of size 32mm dia complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy fancy type CP with long shank and screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm bore stop valve/angular stop cock cast copper alloy,screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC connection 15mm size with PTMT nuts with length 600 mm long, complete all as specified and directed.

S & F in repairs for 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs shower rose 125mm, CP, with otr without swivel joints, any size including fixing to steel pipe or union,complete all as specified and directed.

S&F in repairs waste PVC pipe for wash basin complete all as specified and directed

S&F in repairs 15mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc 1.50 sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n. exc. 4.00 sqm each and removing from site, complete all as specified and directed.

S & F Solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F 75 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed

S & F 150 mm aluminium handles cast type anodized, complete all as specified and directed.

S&F 2nd class HW palin solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned joints, complete all as specified and directed.

Second class hardwood 35mm thick factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright n. less than 12 mm dia with and including a miniumum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed etc, complete all as specified and directed.

S & F 125 mm long mild steel pressure handle, oval type,stove enamelled black complete all as specified and directed.

S&F for mild steel work as in hold fast and similar work conforming to Fe- 290 Gde E-165 complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20 mm graded broken stone aggregate) for fixing hold fast complete all as specified directed

Prepration of new wood or wooden based new or previously untreated surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Taking down 150mm eaves gutters and rain water pipes including all fittings, heads shoes, bends, swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centreline over fittings and accessories) complete all as specified and directed

S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete, all as specified.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete, all as specified.

S&F for 75 mm bore PVC (SWR) bends any radius complete, all as specified.

S&F in repair for 110 mm bore PVC (SWR) bends any radius complete, all as specified.

S&F for 75 mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal complete all as specified and directed

S&F for 110 mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal complete all as specified and directed

S&F for 150 mm grating doom PTMT complete all as specified and directed

Dismantling brick tiles or terracing tiles Single Layer on roof including cleaning the roof surface and filling the cracks (if observed) with silicon compound complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq m including cleaning surfaces complete all as specified and directed.

APP (atatic polypropline) modified membrane 3mm thick minimum weight not less than 3kg/sqm with 150 gsm/Sqm, non wove polister mat as centre core reinforced laid with 75mm side overlap and 100mm end overlap. The memberance has to be laid with LPG torch and over lap shield and finished neat over roof including a coat of bitumen 85/25 @ 1.2 Kg/Sqm over APP memberance and fixed of broken glazed tiles and grouting with mixture of white cement and marble powder over roof complete all as specified and directed.

Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed in neat cement slurry and roof over APP membrance laid over 15mm thick cement screed bed in cement mortar 1:6 all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed

Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

Preparation of old surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall including cornices etc and applying one coat of white wash upto four storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed.

All as per srl item No 61.00 here in before but applying two coat of white wash

All as per srl item No 61.00 here in before but applying one coat of white wash on ceiling.

All as per srl item No 61.00 here in before but applying one coat of cement base paint on walls.

All as per srl item No 61.00 here in before but applying two coats of cement base paint on walls.

All as per srl item No 61.00 here in before but applying one coat of oil bound distemper on walls.

All as per srl item No 61.00 here in before but applying two coats of oil bound distemper on walls.

All as per srl item No 61.00 here in before but applying one coat of exterior emulsion paint on plaster surface on chajjas/band/facia/balcony etc upto four stores bldg complete all as specified and directed

Complete removal of existing treatment from external surfaces of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 2 to 3 mm thick wall putty and one coat of primer and two coats of oil emulsion disemper white or tined on wall upto three stories building complete all as specified and directed. Note:- Shade of the paint shall be approved by GE.

Complete removal of existing treatment from external surfaces of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 2 to 3 mm thick wall putty and one coat of primer and two coats of exterior emulsion paint with silicon based (first quality) on wall upto three storie building complete all as specified and directed. Note:- Shade of the paint shall be approved by GE.

Preparation of previously treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

All as per ser item No. 71 here in above but two coat of synthetic enamel paint

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

All as per ser item No. 73 here in above but two coat of synthetic enamel paint.

Writing leters or figutes (Block Roman, italic or indian) exc 15 cm and n. exc 30 cm high complete all as specified and directed

Preparation of previously treated wooden surfaces of any description not other wise described but not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1: 3 as in ceiling soffit of chajja etc. complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement , complete all specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for rendering 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement , complete all specified and directed.

M&L for preparing of newly plstered surfaces of walls and applying two coats of oil bound distemper over a coat of primer and 2 to 3 mm thick wall care putty complete all as specified and directed

M&L for preparation of old plastered surfaces of wall and applying two coats of cement base paint over a coat of 2 to 3mm thick wall care putty complete all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of cement base, complete all as specified and directed.

Preparation of new surfaces of walls plastered and applying three coat of white wash on ceiling including preparation of surface, complete all as specified and directed.

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile n exc 0.36 sqm, in floor in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick bedding layer of cement mortar for laying floor finishes in CM 1:6 , complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as a sub base finished even and smooth, complete all as specifed and directed

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 Sqm each complete all as specified and as directed at site.

All as per item No.88.00 here-in-before but n.exc. 1.00 sqm.

Pressed steel door frame of size 125 mm x 60 mm with one or more rebates using 1.25 mm thick PBI sheet including necessary fixing lugs, lock strike plate including one shop coat of zinc chromate primer, complete all as specified and directed.

All as per item No. 90 here-in-before but 105x60 mm.

S & F 35 mm thick second class hard wood, factory made, plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

Box type steel window side hung double shutters with provision for desert coller/AC (Inside for wire mesh & outside for glass), including guard bar hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed for welded and fixed steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separately.

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded.Steel window shall be conforming to relevant IS drawing No. CEUZ/TD/1302/09, Sh 1/3 to 3/3, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separteley.

M & L for preparing of newly painted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane including hacking out old glass panes, complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed..

S & F 75 mm long butt hinges, medium weight, cold rolled mild steel fixed with screws or welding complete all as specified and directed.

S & F 150 mm Mild steel pressed handle oval type stove enameled black, complete all as specified and directed.

S & F mild steel 150 mm long helical door springs including roller and roller plate complete and necessary welding required, complete all as specified and directed.

18/19 mm thick prelaminated particle board interior grade as in cupboard shutters, partition wall and shelves fixed with frame, complete all as specified and directed.

M & L for Glazed ceramic coloured tiles (first quality) of size 300 mm x 600 mm x 7 mm as in vertical surface, dado/skirting, set and joint in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick plaster in CM 1:4, complete all as specified and directed.

M & L of machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (each stone not less than 55 cms x 55 cms) over 15 mm thick screed bed in CM (1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 kg/Sqm of surface, complete all as specified and directed.

Aluminium sliding door bolts clamps type (ISI marked), 300 mm long, with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts, four on bolt plates and two on staple plate, complete all as specified and directed

M & L 25 mm dia aluminium anodized deproy rod poweder coated teat wood textured finished and wall thickness 1 mm complete designed and appterned as approved by Engineer-in-Charge.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 13,040.00 during AOC Note:- Tenderers shall not quote for this Schedule

Kalsi Engineers and contractors

BMMJ TRADERS AND ENGINEERS

ASHFAQ AHMED MANHAS

SUNIL AND CO