Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.8 LAccepted-AOC BETONG SHOP KHANGSAR COMPLEX NOWSHARA LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹52.2 L+₹3.4 L (6.97%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹59.2 L+₹10.4 L (21.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹89,324
Closing Date
11 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
SPECIAL REPAIR TO ROAD AT VARIOUS LOCATION AND SPECIAL REPAIR TO FOOT PATH AND ROAD FURNITURE, AT KHUMBATHANG UNDER GE KHUMBATHANG
2023_MES_589501_1
80051/01/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
khumbathang
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹89,324
Yes
27 Jun 2023
15 Apr 2023
12 May 2023
15 Apr 2023
11 May 2023
29 Apr 2023
Amount
Repair to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, path etc including cutting around edges to atleast 25mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again will rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm and directed by Engineer-in-charge.
M&L for Preparaing existing black top surafce by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surafces with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG-10 @ 5Kg/X Sqm complete all as apecified and as directed by Eng-in-charge.
M&L for Bituminous premixed asphaltic dense concrete 40mm consolidated thickness with 6% binder content using paving bitumen VG 10 by weight of total mix laid with self propelling mechanical paver, rolled and compacted with roller of 8 to 12 ton to required camber and gradient with power roller complete all as specified and directed by Engineer-in-charge.
M&L for premixed bituminious macadam with 4% of binder content by weight of total mix using paving bitumen VG-10 laid with self propelling mechanical paver, rolled & compacted with roller of 8 to 12 ton to required gradient and cabmer ( consolidated thickness upto maximum 75 mm) to make good the cut edges of roads etc complete all as specified and directed by Engineer-in-charge.
M&L for Preparation of new / old road surfaces and applying reflective thermoplastic road marking paint (White or golden yellow) of minimum 2.50 mm thick (conforming to BIS-3262), single coat as in centre line and edge line road marking of 150/ 100mm width using 'HOT MARK' by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler as specified in table 803.4 of MORTH specification, thermoplastic requirement for glass beads shall be as specified in (intermix) type-I, MOST/BS 6088A and road marking shall done as per provisions contained in IRC-35-1997, complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L for Machine pressed precast conctete interlocking paver block 60mm thick any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed by Engr-n-Charge.
M&L for 25mm thickness PCC 1:2:4 type B-0(using 12.5mm graded crushed stone aggregate) as in sub floor and paving complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick sand filling (crushed sand) under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M&L for Providing, cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) in roof edging, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.
S&F in repair solar dealineator light, dimension 70x70x100mm, pipe dimension 48x1000mm, direction 360 degrees round light, protection with MS mess fitted, viewing distance 500meter fixed in PCC 1:2:4, block size 300mmx300mmx450mm deep including earth work complete all as specified and directed by Engr-in-Charge.
S&F in repair concave mirror 60 cm dia fixed with frame and fixed in PCC 1:2:4, block size 300mmx300mmx450mm deep including earth work complete all as specified and directed by Engr-in-Charge.
S&F in repair Self Adhesive sheeting reflective tape on old metal tubular dealineator complete all as specified and directed by Engr-in-Charge.
S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed
M&L for prepration of old painted steel & iron surfaces of any description, not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 5,400.00 and any other reduction if any from quoted amount.
M/S RW INFRA
fida group of industries and construction co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .