Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC 1291 1ST FLOOR SECTOR 26 PANCHKULA HARYANA 134116 | PANCHKULA | HARYANA | 134116 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹40.0 L+₹5.8 L (16.9%)Rejected-AOC 00 GIRDHAR GARDEN KE SAMNE KHARI PHATAK ROAD VIDISHA VIDISHA MADHYA PRADESH 464001 | VIDISHA | MADHYA PRADESH | 464001 | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹45.6 L+₹11.4 L (33.2%)Rejected-AOC SHIVANGI NIWAS PO GEETA PEETH CHIMBALHAR PALAMPUR 176071 HP | PALAMPUR | KANGRA | HIMACHAL PRADESH | 176071 | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
₹45.7 L
EMD Value
₹91,460
Closing Date
13 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rahul Meena, IDSE, EE, Garrison Engineer
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
PROVN OF 02 x SEPTIC TANK AT BLDG NO 14 AT SUBATHU AND PROVN OF 03 ATT TOILET NEAR FIRING RANGE AT SOLAN MIL STATION UNDER GE KASAULI
2023_MES_618876_1
GEK-74/2023-24
Open Tender
Civil Works
Item Rate
180 days
subathu and solan under GE Kasauli
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹91,460
Yes
2 Nov 2023
14 Sept 2023
16 Oct 2023
14 Sept 2023
13 Oct 2023
29 Sept 2023
Amount
Schedule 'A' Section - I
Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and n exc 1.5 mtr deep for foundations etc. or for cesspits etc. and not exc. 10 Sq. m on plan and not exc. 1.5 metre in depth and getting out complete, all as specified.
Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and exc 1.5 mtr but not exceeding 3.00 metre deep for foundations etc. or for cesspits etc. and not exc. 10 Sq. m on plan and not exc. 1.5 metre in depth and getting out complete, all as specified.
M&L for rough excavation in hard/dense soil not exceeding 1.5 m deep and getting out complete, all as specified.
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25cm thick, complte all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complte all as specified and directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed , complte all as specified and directed.
M&L for Cement Concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radiuS built in CM 1:4 complte all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks in one brick thick honey comb walling in circular well (soakage pit) steining (any radius or size) constructed from base, built in cement mortar (1:4), using old size bricks, complete all as specified.
M&L for brick bats and broken to gauge exc 63 mm and n exc 100mm complte all as specified and directed.
Material & labour for providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, fixing door frames etc including necessary form work complete all as specified and directed.
M&L for Rendering 15mm thick in cement mortar 1:4 on new/old brick or concrete surface or masonry surface finished even and fair without using, extra cement including mixing of water proofing compound as per manufacture's instructions (water proofing compound shall be measured and paid separately), complete all as specified and directed.
M&L Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd. all as spd and directed.
Integral waterproofing compound complete all as specified and directed. all as spd and directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required as in lintels etc including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.
Mild steel round bars 10mm dia Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165) and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L for providing, precast cement concrete 1:2:4type B-1 using 20mm graded aggregates set in CM 1:6 as in cover slabs (for manholes etc.)
Material and labour for Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed.
M&L for Concrete bed to drain pipes for 150 mm bore, laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), complte all as specified and directed complete.
M&L for Concrete bed to drain pipes for 200 mm bore, laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), complte all as specified and directed complete.
M&L for Concrete bed to drain pipes for 110 mm bore, laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), complte all as specified and directed complete.
M&L for 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complte all as specified and directed.
M&L for 200mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complte all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for waste water all as specifird and directed.
M&L for broken brick/stone or boulders for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for broken bricks Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, complete all as specified and directed
M&L for Cement concrete type- C2 1:3:6 in foundations, filling and mass concrete , complete all as specified and directed.
M&L reinforcement concrete 100mm thick type B-1 1:2:4 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping
M&L for 100mm Sail-glazed stoneware drain pipes laid in trenches and jointed as specified
100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors
150mm dia Cast iron pipes with flanged ends/ verticaliy cast, Class A, in any length, laid in trenches
M&L for Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs
M&L for Cast iron cowls complte all as specified and directed.
Material & Labour for 50mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.
M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed.
Excavation over area n.exc 1.5m deep & getting out in hard/dense soils all as spd and directed.
Excavation over area for exc 1.5 m deep and n exc 3.00m and getting out hard and dence soil complete all as specified and directed.
Excavation over area for exc 3 m deep and n exc 4.50m and getting out hard and dence soil complete all as specified and directed.
M&L for Cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as spd.
M&L for Walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in CM 1:6. all as spd and directed.
M&L for Raised pointing to random rubble masonary course or uncoursed brought upto course in CM 1:4. all as spd and directed.
M&L for PCC 1:2:4, type B-1 using 20mm graded stone aggregates as in coping all as spd and directed.
M&L for providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bonders set in CM 1:6 all as spd and directed.
M&L for Boulder filling dry hand packed tightly as in back of wall all as spd and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed to wall including camps as required complete all as specified and directed
Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed complete all as spd.
M&L for 75 mm thick cement concrete type E-2, 1:5:10 (40mm graded agg) as in Sub-base to floor finishes complete all as spd..
M&L for cement concrete type D2 1:5:10 ( using 40mm graded aggregate) as in foundations, filling and mass concrete.
M&L for laying/spreading of sand as in 25 mm thick cushion to precast concrete interlocking paver block incl watering & consolidating complete all as spd..
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade, jointed with grey cement and no pigment complete all as spd.
M&L for Cement concrete M-15 (Nominal mix) in edging of path (interlocking paver) and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces complete all as spd.
M&L for 40mm thick Damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork and Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) TypeB0 1:2:4 Type B1 1:2:4 (12.5mm graded (20 mm graded aggregate) Beams, cantilevers, bressummers, lintels, chajjas complete all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers chajjas, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces), complete all as specified and directed by Engr-In- Charge.
M&L preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge.
M&L for for applying 3 mm thick (achieved in two coats) wall care putty of new undecorated plastered surfaces of wall complete all as specified and directed
M&L for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint, complete all as specified.
Material & Labour for 75 mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed.
Mild steel work in tubular trusses ,including special shaped washer etc., complete using ERW or induction butt welded type conforming to IS 1161-1979 grade st. 240 , complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.
Same as item No 66.00 above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc all as specified.
S&F Factory made box type steel window with side hung shutters with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, 2 Nos steel handle, 2 Nos steel pegs and with glazing bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
-Ditto-as item no 67.00, but without glazing bars.
S&F Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
M&L for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works all as specified and as directed.
S&F 105x60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified .
S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side 35-40mm thick complete all as specified
S&F factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge.
S&F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing complete all as specified
S&F Figured glass thickness 4 mm, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane.
S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
M&L preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer.
Material and labour for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.
Material & Labour barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed.
S&F aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed.
S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.
S&F stainless steel hinges, medium weight cold rolled mold steel, size 100 mm, ISI marked, complete all as specified and directed .
S&F Aluminium anodised, skeleton tower bolts with plate, staples (Locking Bolt) and length of bolt 375mm and bolt of extruded section and fixed.
S&F bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
S&F Angle valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F rectangular sheet glass shelf assembly, fancy type, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete.
S&F soap dish size 160x160x90mm, vitreous china white, fixed to plugs with chromium plated brass screws complete.
S&F 15mm bore pillar tap long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F 15mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, complete all as specified and directed.
S&F brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified
S&F 15mm dia PVC connection with PTMT nut, of length 450mm, complete all as specified and directed.
S&F Grating square 150 mm size (openable) with or without hole of PTMT (Minimum weight 100gms)
S&F PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor including taking down existing complete all as specified & directed.
S&F gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe.
S&F, counter-type wash hand basin, vitreous china, white, fency decorative type, size 550mm x 400mm fixed over RCC slab incliding CP waste coupling, waste pipe but exclusive of pillar tap/mixer, PVC connection, complete all as specified.
S&F vitreous china wash down water closet (pedestal pattern) , of colour snow white, of size 570x460x380mm and including plastic seat cover of same colour & pressure jet spray etc. complete all as specified and as directed
S&F Vitreous china squatting pan, "Orissa pattern" of size 580 x 440 mm white with integral foot rests,including cast iron P or S trap with provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, flushing cistern, flush pipe, PVC connection for water supply to flushing cistern etc complete.
S&F Vitreous china urinal partition white of size 310x700 mm slabs terminating about 40cm above floor line complate.
S&F Vitreous China urinals, Half stall type (back or corner wall type) of size 420x395x635mm of white with incl CP brass coupling, PVC flexible discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe, complete all as directed.
S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed.
Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required complete all as specified and directed
Material and labour for plain cement concrete type C2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (upto 100mm bore pipe) after the pipe are laid and tested complete all as specified and directed.
S&F 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified.
S&F 110mm dia PVC (SWR) coupler, fixed as required complete all as specified.
S&F 110mm dia PVC (SWR) vent cowl jointing with solvant cement as required complete all as specified.
S&F 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified.
S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.
S&F 75mm dia PVC (SWR) coupler, fixed as required complete all as specified.
S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal, fixed as required complete all as specified.
M&L for first quality joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-In- Charge.
M&L for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-In- Charge.
M&L machine cut Granite slab 15 mm thick as in steps, countershelf, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.
S&F GI metal suspended ceiling system OREO GI lay in plain of 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. the tiles should have humidity resistance of 100% with light reflection of 62% Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire.
S R AND CO
B S Ranbir and Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .