CONVERSION OF CI TO DI PIPE LINE, SPECIAL REPAIR GARDEN LIGHT AND PROVN OF 5 X WATER COOLER 80 LTR CAPACITY WITH STABILIZER AT SANGAM VIHAR MH NEW CANTT PRAYAGRAJ

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth as in soft/ loose soil including forming of bottom surface to required level or slope for laying of CI/ GI pipe / cable complete all as specified and directed.

All as per Sl item No. 1 above but in hard / dense soil including cutting of road / PCC floors etc complete all as specified and directed. Note:- The cost of bailing out , pumping out or otherwise removing of water which may accumulated in the excavation from all causes shall be deemed to include in the unit rate quoted by tenderer.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm each complete all as specified and directed.

Removing of surplus excavated material (soil) to a distance n.exc 50m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Supply and laying of 150 mm bore centrifugally cast (spun) ductile iron pressure pipes for water mains with socket & spigot ends conforming to IS 8329/ 2000 any length for classification of K7 suitable for rubber gasket joint ( push on type) with cement mortar lining inside the pipe with outside zinc coating complete all including existing connection with required size of Tee or MS clamp with rubber bush as specified & directed. Note:- Cutting of pipe, fitting for pipe shall be measured & paid separately under respective item.

Supply and laying of 100 mm bore centrifugally cast (spun) ductile iron pressure pipes for water mains with socket & spigot ends conforming to IS 8329/ 2000 any length for classification of K7 suitable for rubber gasket joint ( push on type) with cement mortar lining inside the pipe with outside zinc coating complete all including existing connection with required size of Tee or MS clamp with rubber bush as specified & directed. Note:- Cutting of pipe, fitting for pipe shall be measured & paid separately under respective item.

S&F ductile iron fittings such as bends, tapers, Tee pieces (single & double) any type angle / radius and straight connecting piece but all ends flanged complete all as specified and directed.

S&F ductile iron connection piece one end flanged and other socket or spigot and bell mouth piece one end flanged other end tapering as bell mouth complete all as specified and directed.

M&L 80mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking down of existing GI tubing complete all as specified and directed.

M&L 50mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking down of existing GI tubing complete all as specified and directed.

M&L for cutting & threading of existing CI / DI pipe of 150 / 100 mm water main and insertion of DI / CI fitting / long and making leak proof for fresh connection complete all as specified and directed. Note:- Cost of the T&P required for taking connection deemed to be included in the quoted rate.

Taking up old rusted/ worn out/ corroded cast iron pipe 150mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.

Taking up old rusted/ worn out/ corroded cast iron pipe 100mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.

Taking up or down old rusted/ worn out 80 mm bore GI steel water tubing laid in trenches or under floor or fixed to wall including all fittings & connections & disconnecting from branch connection complete all as specified and directed.

Taking up or down old rusted/ worn out 50 mm bore GI steel water tubing laid in trenches or under floor or fixed to wall including all fittings & connections & disconnecting from branch connection complete all as specified and directed.

Construction of brick masonry valve pit chamber of size 950x950x950mm (internal dimensions) including PCC, brick work and 3mm thick MS sheet cover, MS frame of angle iron size 50x50x6mm around valve pit, locking arrangement with pad lock of size 50mm dia brass 6 levers with duplicate keys (make:- Godrej) and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Construction of brick masonry valve pit chamber of size 450x450x450mm (internal dimensions) including PCC, brick work and 3mm thick MS sheet cover, MS frame of angle iron size 50x50x6mm around valve pit, locking arrangement with pad lock of size 50mm dia brass 6 levers with duplicate keys (make:- Godrej) and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 50mm bore gun metal, globe or gate valves, with iron wheel heads, screwed both ends for iron pipes and fixed in repair complete all as specified and directed.

M&L for cutting of road metal surface not less than 60 cm depth and width not less than 45 cm for passing of pipe lines and making good the road surface with 150 mm thick layer of compacted thickness of PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed. NOTE: (i) Proper compaction shall be done to avoid any settlement.

S&F 150mm bore sluice valve, heavy duty both ends flanged class PN-1 with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

S&F 100mm bore sluice valve, heavy duty both ends flanged class PN-1 with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

S&F 80mm bore sluice valve, heavy duty both ends flanged class PN-1.6 with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

Supply, fixing, connecting & testing turin LED Bollard garden light 10 Watt in IP 66 rated LED bollard with robust design & efficient light distribution with all connected PCC works and nut, bolts etc and connection with copper wire of suitable size complete all as specified & directed Make- Havells Cat Part No. TURINBLS10WLED830PSYMTOPC or equivalent make as specified in P.S.

Supply, fixing, connecting & testing ruby LED post type gate light 15 Watt capacity in IP 66 rated LED bollard with robust design & efficient light distribution with all connected PCC works and nut, bolts etc and connection with copper wire of suitable size complete all as specified & directed Make- Havells Cat Part No. RUBYMINIPT15WLED830PSYMTOPC or equivalent make as specified in P.S.

S&F of FRP/ SMC Junction box of approximate size 130 x 180 x 77 mm , press moulded , front openable, side hinge complete with bakelite connector 4 Nos with necessary fixing arrangements by providing MS clamps 2 Nos made out of MS flat 25x3 mm including nuts ,bolts and washers etc fixed with mechanical fasteners of size 250x200x100 mm suitable for 3 phase ,4 wire system including aluminium bus bar of 100 apms rating capacity complete all as specified and directed.

M &L for three core 1.5 sqmm copper conductor cable for connecting up street/ security light with pole junction box complete all as specified & directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

Supply & laying sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) complete all as specified and directed. Note: Only punned depth shall be measured & paid.

Supply, installation, commissioning & testing of water cooler of full stainless steel (FSS), electric driven, single phase, having nominal cooling capacity 40 ltr and storage capacity of 80 Litres (environmental friendly gas) including provision of PVC braided connection heavy duty 750 mm long with brass union both ends suitable for 15 mm bore GI pipe water connection and necessary drain out water PVC pipe of suitable dia and length as required complete all as specified & directed. Note:- (i) Quoted rate deemed to be included cost of PVC connection, drain out water PVC pipe etc

S&F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170v to 250v with out put voltage stabilizer at 230v with accuracy of + 2.5% and of capacity 5 KVA complete all as specified & directed.

S&F sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket along with one MCB, single pole of current rating 20 amps, B series 240 volts AC fixed to the wall surface or making suitable size of hole in the wall to fix it whenever is required and making good the existing surface complete all as specified & directed.

M&L for concealed sub main wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 4.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories alongwith one run of PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm as earth continuity conductor for 8 way DB complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

Schedule of Credit (MINUS) Rs. 1016650.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

M.B ENTERPRISES (BID ID -3151646)

ABHISHEK ENTERPRISES (BID ID -3157204)

New Era Engineers (BID ID -3157326)

M/S CHANDRIKA PRASAD AND SONS (BID ID -3157051)

Ambrish Builders (BID ID -3152269)

M/S SHIV BALLABH MISHRA (BID ID -3156671)

disha construction (BID ID -3157327)