Renovation work including repairing of boundary wall, renovation work of new record room, structural dome work, electrical work, creation of officer c

Renovation work including repairing of boundary wall, renovation work of new record room, structural dome work, electrical work, creation of officer cabin and

chamber at Kota House

S.No. Sub-Head NDSR Amount (in Rs.) DSR Amount (in Rs.) Total

Digitally signed by AMIT

1.1 1.10 Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

26.28 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven

percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of

Engineer-In-Charge

26.28.3 25mm average thickness

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge.

MR External Plaster With Use 6 mm Recron 3S @125 gm/bag of cement of 50Kg in 1:4 cement sand ratioFiber (all related items, materials and

1.4 activities required for the proper completion of the said activity shall be included in the same rates like scaffolding, safety equipments, Sqm 1,100.00 775.00 8,52,500.00

erection machinery etc.)

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/

1.6 litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

2 New Record Room and Structure Domn works

2.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

2.2 MR Providing and fixing 12 mm transparent poly carbonate sheets as per company specification including required hardware and fixing Sqm 265.00 9,43,400.00

MR WALL PANELING :-Providing and fixing Paneling upto ceiling height consisting of frame and required board, frame work made of section

made of 50x25 mm , consisting of floor and ceiling channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to the floor

and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or

metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

2.5 ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid -

through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints

of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended

jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher as per manufacture's specification and

direction of engineer in charge all complete.(Cost of Aluminium framing 600X600mm Paid saperately)

9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective

2.6 surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

9.127.2 1.0 mm thick

Digitally signed by AMIT

12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5

mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size

3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) sqm 1145.95

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/

2.9 litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

13.83.2 Two coat- Wall

Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll form G.I.

sheet with zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal

thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at not greater

2.10 MR than 50 mm from either end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick Sqm 200.00 1022.00 2,04,400.00

installed perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm

centers. Maintain 5 to 10mm gap between C Stud and web of U Track.

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

3.1 surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable etc. as required.

1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in

3.2 surface/ recessed steel conduit as required.

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding

modular plate etc. as required.

3.4 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Digitally signed by AMIT

3.5 1.28 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

MR Supply, Installation, Testing and Commisioning of pre-wired round shape Surface Mount 15Watt LED Down Lighter fitting complete with all

accessories, housing made of Aluminium Die-cast, System Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz, The luminare

rated life (L70) >50000 Hours with High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and

a operating at >0.95 PF., BIS approved Driver including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable NOS 20.00 2,650.00 53,000.00

and earthing etc as required.

MR Supply, Installation, testing and Commisioning of 1.2 mtr 4 feet long Batten light Cove Light: Supply of natural white 4000K Luminaire) and

system efficiancy better than 100 LPW, Low Voltage 12VDC system, with Thermo-conductive adhesive complete etc. as required.

MR Supply, Installation, Testing and Commisioning of 2X2 or linear 28-32Watt LED fitting complete with all accessories, housing made of

Aluminium Die-cast, System Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70) >50000 Hours with

High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.95 PF., BIS approved

c Driver including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc as required. NOS 10.00 4,260.00 42,600.00

1. (DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point.High Speed Gigabit

2 Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination at Work Station end. Nos. 8 880.00 7,040.00

3 Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet (I/O) to end user device

4 Supply, Installation, Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for information outlet (I/O) Nos. 8 1150.00 9,200.00

5 Supply, Installation, Testing and Comissioning of 24 port Loaded Jack Panel for CAT6 cable termination at rack end.

6 Supply , Installtion , Testing and Comissioning of 4 port Face Plate white for I/O fixing at user side Nos. 8 255.00 2,040.00

7 Supply and fixing 25 amp MCCB on existing setup including terminationa and other allied works as per instruction of

Supply ,laying,testing and commissoning of 1100V grade armoured cable having sector / circular shaped aluminium / conductor PVC

insulated cores under ground PVC tape wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed confirming

to IS: 1554, laid on wall or ceiling using GI clamps and spacers as per route shown at site and further as directed by Engineer-in charge

Creation of officers chamber

MR CUBICAL WORKSTATION Supply Installation and fixing of SIZE- 1500W X1500x 600D X 750HT TABLE TOP AND 1200HT PARTITION WITH 1200MM

RETURN PARTITION-Main Partition:-Partition is made of 50mm thick NEO based system with half glass marker & fabric magnetic tile above

1 table top and laminate tile below the table top. Return Partition(only in starting and last of each row): Partition is made of 50mm thick NEO

based system with fabric magnetic tile and inside above table top and laminate tile below the table top

Dismenteling existing setup and re fixing other place including termination electrical and data point

High BackOfficers chair upplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12

mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

3 provided with self tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black NOS 4.00 22,580.00 90,320.00

.The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3.

The backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Digitally signed by AMIT

Supporting staff Lenier work station: Dimesnion: 1200mm(L)x 600mm(D) x 750mm(H) Modular Workstation With 1200mm, Double Raceway

systems Skirting label and below the table top . lower tile both side laminated and upper tile inside side fabric, White

4 Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end 18mm thick MDF board., and 3Drawer top Nos 4.00 35,650.00 1,42,600.00

supported Pedestal unit Size 400W x 400D x 725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White,

Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel Gray. and White Tinted Glass

Medium Back Visitor/supporting staff chair : Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair

5 of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back design made of NOS 12.00 16,500.00 1,98,000.00

12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 10.0 +/-

0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam of 28kg/m3.

Digitally signed by AMIT