REPAIR TO FURNITURE FOR CERTAIN UNITS UNDER GE NORTH BIKANER

Amount

Table Writing (Steel) (900 X600 X760 mm) (DBS/MFFR) -TP (a) S & F in replacement of unserviceable Table top with new Table top made of 18mm thick pre- laminated particle board (Exterior grade) of size 900 x 600 mm with 4 mm half round teak wood edging fixed to frame ( all-round) with screws complete all as specified and as shown on drawing

(b) S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified and as directed by the Engineer-in-Charge

(c) Cutting and removing old un-serviceable leg of table upto 100 mm long and provide new leg of MS 25 mm square pipe having 1.6 mm wall thickness as per existing complete all as specified and as directed by the Engineer-in-Charge .

(d) Repair to drawer of the table by removing deep dents, welding of broken joints etc. complete all as specified and as directed by the Engineer-in-Charge .

(e) Painting to steel surface of the Table Writing one coated by spray gun with synthetic enamel paint of Grey shade after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .

Table dinning Steel size of 1800 x 750 mm (DBS/MFFR) -TP (a) S & F in replacement of unserviceable Table top with new Table top made of 18mm thick pre- laminated particle board (Exterior grade) of size 1800x750 mm with 4 mm half round teak wood edging fixed to frame ( all-round) with nut and bolts size of 4 mm x 50 mm and All exposed surfaces of wood work shall be treated with French Polish high gloss best quality complete all as specified and as shown on drawing and directed by Engr -in -charge.

(b) S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified and as directed by the Engineer-in-Charge .

(c) Cutting and removing old un-serviceable leg of table upto 100 mm long and provide new leg of MS 25 mm square pipe having 1.6 mm wall thickness as per existing complete all as specified and as directed by the Engineer-in-Charge .

(d) Painting to steel surface of the table dinning one coated by spray gun with synthetic enamel paint of Black shade after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .

Peg Table Steel (DBS/MFFR) TP (a) S & F in replacement of unserviceable Table top with new Table top made of 18mm thick pre- laminated particle board (Exterior grade) of size 300x450 mm with 4 mm half round teak wood edging fixed to frame ( all-round) with screws and All exposed surfaces of wood work shall be treated with French Polish high gloss best quality complete all as specified and as shown on drawing and directed by Engr -in -charge.

(b) S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified and as directed by the Engineer-in-Charge .

(c) Painting to steel surface of the Peg Table one coated by spray gun with synthetic enamel paint of Black shade after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .

Chair Dining Steel without arms (DBS/MFFR) (TP) (a) Opening up and removal of seat, back and shoes of chair Dining steel and preparation of old painted steel surfaces frame with one coat of synthetic enamel paint grey colour and refixing of seat/back if in serviceable condition. (The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.) The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item.

(b) Supply only seat of size 405 x 430 mm made of 19 mm thick pre-laminated particle board (Exterior grade) duly beading with 4 mm thick half round teak wood shall be provided all around all as specified and directed/provided sample by Engineer-in-charge

(c) Supply only back of size 405 x 250 mm made of 19 mm thick pre-laminated particle board(Exterior grade) duly beading with 4 mm thick half round teak wood shall be provided all around all as specified and directed/provided sample by Engineer-in-charge

(d) Supply only PVC shoe black for chair dining as shown on drawing.

Chair Dining (DBS/MFFR) FD-279 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shwon on drg. (a) Rear leg of size as Shown on drg

(b) Front leg of size as Shown on drg

(c) Front rail of size as Shown on drg

(d) Back rest of size as Shown on drg

(e) Side rail of size as Shown on drg

(f) Back rail of size as Shown on drg

(g) Stiffener (one large piece and two small piece) of size as Shown on drg

(h) French polishing on surfaces of chair dining wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Chair Writing Steel with arms (DBS/MFFR) TP (a) Opening up and removal of seat, back and shoes of chair Writing steel and preparation of old painted steel surfaces frame with one coat of synthetic enamel paint grey colour and refixing of seat/back if in serviceable condition. (The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.) The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item.

(b) Supply only seat of size 535 x 470 mm made of 19 mm thick pre-laminated particle board (Exterior grade) duly beading with 4 mm thick half round teak wood shall be provided all around all as specified and directed/provided sample by Engineer-in-charge.

(c) Supply only back of size 470 x 250 mm made of 19 mm thick pre-laminated particle board (Exterior grade) duly beading with 4 mm thick half round teak wood shall be provided all around all as specified and directed/provided sample by Engineer-in-charge.

(d) Supply only handle of chair writing of size 400 x60 mm made of 19 mm thick plywood with decorative laminated sheet 1.2 mm thick fixed with 4 mm dia bold and nuts with smooth finished edging as in handles all as specified and directed by Engineer-in-charge

(e) Supply only PVC shoe black for chair writing as shown on drawing.

Chair Easy Steel (DBS/MFFR) TP (a) Opening up and removal of seat, back and shoes of chair Easy steel and preparation of old painted steel surfaces frame with one coat of synthetic enamel paint grey colour and refixing of seat/back if in serviceable condition. (The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.) The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item.

(b) Supply only seat of size 575x510 mm made of 19 mm thick pre-laminated particle board (Exterior grade) duly beading with 4 mm thick half round teak wood shall be provided all around all as specified and directed/provided sample by Engineer-in-charge.

(c) Supply only back of size 480 x 300 mm made of 19 mm thick pre-laminated particle board (Exterior grade) duly beading with 4 mm thick half round teak wood shall be provided all around all as specified and directed/provided sample by Engineer-in-charge.

(d) Supply only handle of chair easy of size 610 x60 mm made of 19 mm thick plywood with decorative laminated sheet 1.2 mm thick fixed with 4 mm dia bold and nuts with smooth finished edging as in handles all as specified and directed by Engineer-in-charge.

(e) Supply only PVC shoe black for chair easy as shown on drawing.

Locker steel (DBS/MFFR)FD-1029/TP (a) S & F in replacement of unserviceable aluminium hasp & staple with new aluminium hasp & staple, 100 mm long, mild steel chromium plated (heavy duty) of locker bed side fixing with & including steel screws complete all as specified and as directed by the Engineer-in-Charge. The cost of steel screws shall be deemed to be included in the quoted rates of this item.

(b) S & F in replacement of unserviceable leg with new leg made out of 1 mm thick PBI sheet of size & shape as per existing complete all as specified.

(c) S & F in replacement of unserviceable aluminium handle with new aluminium D type handle (chromium plated) (heavy duty) 100mm long of locker bed side fixing with & including steel screws complete all as specified as approved/directed by the Engineer-in-Charge.

(d) Painting to steel surface of the locker steel one coated by spray gun with synthetic enamel paint of Black shade after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .

RECANNING OF ALL TYPE CHAIRS, TP Chair dining, easy and writing (DBS/MFFR) (a) Removing of old unserviceable plastic cane from all sorts of chairs i.e chair dining, chair writing, chair easy , stool dressing CB etc (except chair verandah) including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and back and 2 mm wide and 0.40 mm thick half round for remaining portion, complete all as specified and as directed by Engineer - in - Charge

Charpoy GI Pipe with Plywood top (DBS/MFFR) (a) Removing of unserviceable plywood from Charpoy GI Pipe, tightening of loose check nuts, elbows, long rails. Short rails, legs (i.e., complete charpoy) and supply and fixing the 12 mm thick 7 ply, commercial type BWR, exterior grade (water proof), ISI-303 marked of size 1980 x 900 mm fixed on top of GI Charpoy as shown on drawing with mild steel galvanized iron nuts & bolts of size 70mmx6mm with GI washer (heavy weight) and three stiffner made out of MS flat iron 35 x 5 mm parallel to short rail duly painted black will be welded between the long rail (All as approved by GE and directed by Engr -in- charge.

(b) M & L for electric welding of long rails, short rails, legs of 32 mm bore GI tubing by continuous welding around the broken joints duly painted with aluminum paint of welding portion all as directed by Engr-in-charge. Note :- (a) Unit of measurement of this item is 'Each' which shall comprise of welding of each broken joint all as specified above/directed by Engr-in-charge. (b) Welding rods shall be ISI marked.

Bed hard with steel frame (DBS/MFFR) FD/E6/MAP-08(R) (i) Removing of unserviceable ply wood from Bed hard with steel frame fixing the 12mm thick ply wood sheet on top suitable for Bed hard with steel frame as shown on drg of size 1980 x 900mm (BWR) as per IS-303 with mild steel galvanized iron nuts & bolts with GI washer (Heavy weight) and including electric welding of loose long rail short rail, legs centre stiffender, Head rest, Foot rest and cleat of MS pipe by continuous welding around the broken joints and also replacement of old unserviceable above parts with new parts where required and also including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surfaces with provding 04 Nos new hard rubber shoes to each Bed hard with steel frame at the bottom of legs after removing of old shoes complete all as specified and as directed by Engineer-in-charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and washers, PVC shoes and painting of the Bed hard steel to be included in the quoted rate.

(ii) S & F of new head rest made of pre-laminated particle board 18mm thick both side teak face of exterior grade with 04mm thick teak wood beading shall be provided all-round including screws and welding of cleat all as specified in drawing directed by Eng-in-Charge.

(iii) S&F of new Foot rest made of pre-laminated particle board 18mm thick both side teak face of exterior grade with 04mm thick teak wood beading shall be provided all-round including screws and welding of cleat all as specified in drawing directed by Eng-in-Charge.

Almirah steel Large all size (a) S & F in replacement of unserviceable lock with new lock of 6 levers and ISI mark lock with double keys made of standard manufactures like Godrej or its equivalent. The cost of steel screws shall be deemed to be included in the quoted rates of this item.

(b) S & F in replacement of unserviceable MS cleat with new MS cleat to support shelf duly painted with two coats of synthetic enamel paint of olive green shade with nuts, bolts of suitable size including welding of broken shutter of almirah complete all as specified.

(c) S & F in replacement of unserviceable CP handle with new CP handle including nut, bolt & washer made of standard manufactures like Godrej or its equivalent. The cost of nut bolts and washers shall be deemed to be included in the quoted rates of this item.

(d) Painting to steel surface of the almirah one coated by spray gun with synthetic enamel grey paint after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .

Chair executive medium back TP/ Special Unit (a) S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat and back of Chair executive medium back including taking out old worn out Tapestry/Fabric Cloth and Foam from Chairs complete all as specified and as directed.

(b) M & L bottom base with steelness steel frame including twin castor wheel each chair five Nos (as approved) of chair executive medium back including taking out unserviceable bottom base with twin castor Wheel from Chairs, complete all as specified and as directed.

(c) M&L gas lifting hydrolic system of chair executive medium back including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.

(d) M&L handle of chair executive medium back including taking out unserviceable handle from Chairs, complete all as specified and as directed.

Chair writing wooden S & F the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair writing complete and all as specified and shwon on drg. (a) Fancy type rear leg of size as Shown on drg

(b) Fancy type front leg of size as Shown on drg

(c) Fancy type arms of size as Shown on drg

(d) Fancy type back rest of size as Shown on drg

(e) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Dinging 06 persons TP/ Special Unit S & F the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Fancy type front and back long rail

(b) Fancy type short rail

(c) Fancy type legs

(d) Table Top new made of prelaminated MDF board with coffee colour both side of size 1800x900x18mm thick with 4 mm thick half round teak wood beading shall be provided all around

(e) S&F second class hard wood corner / bracket (L shape) of size 150 x 150 x 35 mm thick and fitted with screw between long rail to legs short rail to legs.

(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Dinging 04 persons S & F the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Fancy type front and back long rail

(b) Fancy type short rail

(c) Fancy type legs

(d) Table Top new made of prelaminated MDF board with coffee colour both side of size 1200x900x18mm thick with 4 mm thick half round teak wood beading shall be provided all around

(e) S&F second class hard wood corner / bracket (L shape) of size 150 x 150 x 35 mm thick and fitted with screw between long rail to legs short rail to legs.

(f) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Peg 450x450x400/450 mm Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table Top new made of prelaminated MDF board with coffee colour both side of size 450x300x18mm thick with 4 mm thick half round teak wood beading shall be provided all around

(b) Front and back rail

(c) Short rail

(d) Legs square & round type

(e) Short/long stiffeners

(f) S&F second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Centre size of 1050x525x450 mm Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table Top new made of prelaminated MDF board with coffee colour both side of size 1050x525x450 mm thick with 4 mm thick half round teak wood beading shall be provided all around

(b) Front and back rail

(c) Short rail

(d) Legs square & round type

(e) Short/long stiffeners

(f) S&F second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Sofa Set 5 Seater (one large peice three seater and two single seater) Removing of old tapestry cloth, hessian cloth from sofa set of three seater and provision of new tapestry cloth, hessian cloth, linning cloth including tightening of spring, replacement of old spring with new spring where required, cords, replacement of seat and back cushion 100 mm thick made of 100% foam 32 density and wooden parts replacement with new legs, rail, arms, stiffener where required and polishing of exposted surface complete all as specified and shown on drawings. Note:- (a) Seat and back cushioned 100 mm thick made of 100% foam. Make-Sleepwell/Kurlon of 32 density (b) Tapestry cloth best quality not less than Rs 250/- per meter shade and quality shall be approved by Engineer-in-charge. (c) The cost of steel screw, nails, polishing of wooden frame etc shall be deemed to be included in quoted rate of this item

Sofa Set Single Seater Removing of old tapestry cloth, hessian cloth from sofa set of three seater and provision of new tapestry cloth, hessian cloth, linning cloth including tightening of spring, replacement of old spring with new spring where required, cords, replacement of seat and back cushion 100 mm thick made of 100% foam 32 density and wooden parts replacement with new legs, rail, arms, stiffener where required and polishing of exposted surface complete all as specified and shown on drawings. Note:- (a) Seat and back cushioned 100 mm thick made of 100% foam. Make-Sleepwell/Kurlon of 32 density (b) Tapestry cloth best quality not less than Rs 250/- per meter shade and quality shall be approved by Engineer-in-charge. (c) The cost of steel screw, nails, polishing of wooden frame etc shall be deemed to be included in quoted rate of this item

Study Table 3’ x 2 ‘ (900 x 600 x750 mm) with drawer Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table Top new made of prelaminated MDF board with coffee colour both side of size 900x600x18mm thick with 4 mm thick half round teak wood beading shall be provided all around

(b) Long rail

(c) Short rail

(d) Legs square & round type

(e) Short/long stiffeners

(f) S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.

(g) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Chair dinning without arms cushioned size of 450x450x 900mm/Chair dining high back with cushioned size of 450x400x 900mm (a) Replacement of seat cushioned 75 mm thick made of cool foam (Make : Sleepwell/ kurlon) of 32 density including ply wood 12mm thick suitable for seat duly covered with well finished best quality tapestry cloth not less than Rs 250/- meter shade and quality shall be approved by Engr-in- charge/GE.

(b) Replacement of front legs made of well seasoned sheesham wood duly plaine/smoothened after taking out the old unserviceable front legs

(c) Replacement of rear legs rest all as per item No. 23 (b) here in before

(d) Replacement of front and back rail well seasoned sheesham wood all as specified in drawings after taking out the old existing unserviceable rails

(e) Replacement of side rail well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable side rails.

(f) Replacement of back rail stiffner , side and middle stiffner well seasoned Sheesham wood all as specified in drawings after taking out the old existing unserviceable stiffners.

(g) S&F second class hard wood corner / bracket (L shape) of size 50mm x 50mm x 20mm thick fitted with screw between side rail to legs.

(h) Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.

Chair executive revolving Type-I HFD-2047 (a) M & L Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of chair executive revolving including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed.

(b) All as per item No 101 (a) here in before but Back.

(c) All as per item No 101 (a) here in before but twin Castor Wheels

(d) All as per item No 101 (a) here in before but bottom base steelness steel

(e) All as per item No 101 (a) here in before but lifting hydrolic system

(f) All as per item No 101 (a) here in before but handle Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Chair CB Steel without arms cushioned seat and back HFD-2044 (a) S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of chair CB w/o arms including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed.

(b) All as per item No 107 (a) here in before but Back. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Chair easy steel FD-121 (M) (a) Removing old unserviceable seat and S & F new seat made out of 12 mm thick plywood both side commercial upholstered with foam 32 density into 75 mm thick covered with leatherite raxian cloath of approved best quality to be fitted with MS screw with nut and bolts of required size of seat of 560 mm x 635 mm complete all as specified and directed.

(b) All as per item No 109 (a) here in before but Back.

(c) M & L gas welding to chair easy steel frame where required by continuous welding around the broken joints and including painting with one coat of synthetic enamel paint black after preparation of old paint surface and also providing 04 nos new hard rubber shoes to each chair complete all as specified and directed. Note:- (i) Cost of leatherite raxian cloth approved by GE/ Engineer-in-Charge, shall be in the range of Rs 150/- to Rs170/- approx per meter.

Couch Examination HFD-2019 (a) Removing of old foam leatherite raxion from couch examination and provision of new 50 mm thick synthetic foam of 32 density (Make-Sleepwell/Kurlon) and covering of foam with leatherite raxion of best quality complete all as per drawing and as specified and directed by the Engineer-in-Charge. Note:- (i) Cost of all type screw, pvc shoe and steel surface painting of one coat synthetic enamel paint (White)of couch examination shall deemed to be included in the quoted rate. (ii) Cost of leatherite raxian cloth approved by GE/ Engineer-in-Charge, shall be in the range of Rs 150/- to Rs 170/- approx per meter.

Chair CB Steel with arms cushioned seat and back HFD-2045 (a) S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of Chair CB Steel with arms cushioned seat including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed by Engineer-in-Charge.

(b) All as per item No 113 (a) here in before but Back.

(c) All as per item No 113 (a) here in before but handle Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Chair CBA Steel children HFD-2046 (a) Removing old unserviceable one piece pvc seat and back of chair CBA Steel children and in lieu providing new one piece pvc seat and back including cushion seat with rexion cloth of chair as per specified in drawing with fixing material complete all as specified and as directed.

(b) Removing old unserviceable arms of chair and supply & fixing arms IInd class hardwood duly covered with 15mm foam with rexion cloth complete and including welding of steel frame the broken joints also painting with one coat of synthetic enamel paint shade black & providing four nos new hard rubber shoes to each chair complete all as specified and directed.

Cabinet Filling size of (914x463x985mm) 3 compartment HFD-2038 (a) Taking out old u/s drawers from the cabinet filling and refixing the same after repair by proper welding denting and making the same proper functioning and S & F drawer channel with rolling wheel complete all as specified.

(b) S & F in replacement of unserviceable drawer both side lock with new lock size of 40 mm, 4 lever ISI marked with duplicate key complete all as specified.

(c) M & L gas welding to cabinet filling frame where required by continuous welding around the broken joints and including painting steel surface of the cabinet complete by sprey painting of synthetic enamel paint grey shade and preparation of steel surfaces (Priming with red oxide primer shall be done wherever welding is carried out for the broken joints and also replacement of old unserviceable required part and filler coat appliers after preparation of old paint surface complete all as specified and directed.

S & F the following new parts after removing broken/unserviceable part including tightening with screw other member of the desk stand lecture steel complete and all as specified shown on drawing. (a) 18MM thick pre-laminated particle board front side runner existing desk stand shape and size shown on drawing with 4MM thick teak wood beading shall be provided all round all as specified in drawing and directed

(b) All as per item No 121 (a) here in before but side runner.

(c) All as per item No 121 (a) here in before but top front runner.

(d) All as per item No 121 (a) here in before but Top side runner.

(e ) All as per item No 121 (a) here in before but Lower Shelf.

Screen movable with cloth HFD-2015 Removing all unserviceable green cloth and both side hook spring set of three to screen movable supply and fix new green cloth of ( approved best quality) with suitable size spring including minor repair like welding, painting to frame and wheels repair complete all as specified and as shown on drawing as directed.

Table bed side steel Type-II HFD-2005 S &F in replacement of unserviceable knob 25mm and PVC Shoe with new aluminium anodized knob 25mm and PVC hard shoe of best quality including minor repair like welding and painting to steel surface of the table one quoted by spray gun with synthetic enamel paint of whitte shade after preparation of old painted surface complete all as specified and as directed.

Trolly solid linen receiver steel HFD-2013 S & F in replacement of unserviceable cloth for trolly solid linean & lid cloth with new cloth (As approved) best quality including minor repair like welding,lifting nut & bolt, wheels and painting if required, complete all as specified & as directed.

Table office clerk steel Type-II HFD-2051 (a) S & F in replacement of unserviceable Table top with new Table top made of 18 mm thick pre- laminated particle board (Exterior grade) with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws complete.All exposed surfaces of wood work shall be treated with French Polish high gloss best quality and included electric welding of loose compodent by continuous welding around the broken joints all as specified and as shown on drawing.

(b) Repair to drawer/ shutter of the table by removing deep dents, welding of broken joints etc. complete all as specified.

(c) S & F in replacement of unserviceavle lock with new lock size of 40 mm , 4 lever ISI marked with duplicate key complete all as specified.

(d) S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified.

(e) Painting to steel and iron surface of table one quoted by spray gun with synthetic enamel paint of olive green shade after preparation of old surface complete all as specified.

Table centre two tier steel HFD-2040 S & F in replacement of unserviceable glass table top with new glass table top size of 800X550X10MM thick with rubber buffers and PVC shoe including minor repair welding and painting to steel surface of the table are coated by spray gan with synthetic enamel paint of black shade after preparation of old painted surface complete all as specified and as directed.

Chair easy wooden cushion seat and back HFD-2034 (a) Replacement of seat cushioned 75 mm thick size of 700X500mm made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- Per meter shade and quality shall be approved by Engr-in- charge/GE.

(b) All as per item No 135 (a) here in before but back size of 560X500mm with round shape

(c) Replacement of front & back moulded round type shape legs made of well seasoned sheesham wood duly plained/smoothened after taking out the old unserviceablefront front and back legs.

(d) All as per item No 135 (c ) here in before but front and back rail .

(e ) All as per item No 135 (c) here in before but side rail .

(f) Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.

Side rack wooden with glass HFD-2042 S & F the following new parts after removing broken/unserviceable part including tightening with screw other member of the side rack complete and all as specified shown on drawing. (a) 18mm thick pre laminated particle board top existing side rack shape and size shown on drawing including 4mm thick teak wood beading all around.

(b) All as per item No 141 (a) here in before but bottom.

(c) All as per item No 141 (a) here in before but Side.

(d) All as per item No 141 (a) here in before but Shelf.

(e) 5MM thick glass door with double aluminum channel existing side rack shape and size shown on drawing including suitable handle.

Table office offrs steel with side table HFD-2063(a) S & F in replacement of unserviceable Table top with new Table top made of 18 mm thick pre- laminated particle board (Exterior grade) size of 1800X900MM with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws complete.All exposed surfaces of wood work shall be treated with French Polish high gloss best quality and included electric welding of loose compodent by continuous welding around the broken joints all as specified and as shown on drawing.

(b) Repair to drawer/ shutter of the table by removing deep dents, welding of broken joints etc. complete all as specified.

(c) S & F in replacement of unserviceavle lock with new lock size of 40 mm , 4 lever ISI marked with duplicate key complete all as specified.

(d) S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified.

(e) All as per item No 146 (a) here in before but table front side runner size of 1800X600mm

(f) All as per item No 146 (a) here in before but table side runner size of 730X600mm..

(g) All as per item No 146 (a) here in before but table side rack top size of 900X450mm.

(h) All as per item No 146 (a) here in before but table side rack side runner size of 600X400mm.

(i) All as per item No 146 (a) here in before but table side rack key board tray size of 450X480mm with telescopic channel..

(j) Painting to steel and iron surface of table one quoted by spray gun with synthetic enamel paint of olive green shade after preparation of old surface complete all as specified.

Hot food trolley alm HFD-2066 S&F the following new parts after removing the unserviceable parts including minor repair like gas welding nut&bolts heating system and preparation steel surface inner and outer of the hot food trolly complete all as specified and shown on drawing. (a) Heating elements 2 KW cup type with rubber washer and nut & bolts.

(c) All as per item No 156 (a) here in before but cable three core copper conductor heavy duty 5 mtr each trolly with three pin plug top 15 amps.

(d) All as per item No 156 (a) here in before but steel pot with lid suitable size each hot food trolly 7 Nos Pot completer as per drawing.

Chair moulded plastic with arms supreme ornate (a) Removing old unserviceable seat of chair and S &F complete new seat supply by company made of standard manufactures make supreme model ornate red colour (approved best quality) to be fited with nut and bolts of required size complete all as specified and as directed.

(b) All as per item No 160 (a) here in before but back of chair

Chair dining PVC seat FD/E6/MAP/05® Removing old unserviceable parts and S&F size and shape made out of 1st class hard wood (shisham) including tightening with screw to other members of the chair and polished,PVC seat complete all specified as shown on drawing and directed.(a ) All as per item No 41 here in before but PVC Seat.

(b) All as per item No 162 here in before but front leg.

(c) All as per item No 162 here in before but rear leg.

(d) All as per item No 162 here in before but stifner.

(e) All as per item No 162 here in before but side rail.

(f) All as per item No 162 here in before but front & back rail.

(g) Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.

Chair verandah MAP Offrs FD/MAP-II/06 S&F in replacement of unserviceable iron strip for seat & back strip for chair verandahh offrs seat & back shape & size as per drawing including minor repair like gas welding and painting to steel surface of the chair one coated by spray gun with synthetic enamel paint of black shade after preparation of old painted surface complete all as specified and as directed.

Table Dressing MAP including Mirror MAP Builtin Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified and directed by Engr-in-Charge. (a) Replacement of old unserviceable top or bottom of size 1050x300 mm and fabricated out of pre-laminated particle board with teak veneers both side 18 mm thick work with screws and MS clamp (L Shape) complete all as specified.

(b) Replacement of old unserviceable side rail of size 370 x 300 mm fabricated out of pre-laminated particle board with teak veneers both side size of 18 mm thick fixed to frame work with screws and MS clamp (L Shape) complete all as specified.

(c) Replacement of old unserviceable plywood, 6 mm thick, commercial on back side of size 1050x370 mm of the table complete all as specified.

(d) Aluminum anodized knob 25 mm of best quality.

(e) Replacement of old unserviceable drawer of size 410 x 290 mm fabricated out of pre-laminated particle board with teak veneers both side of size 18 mm thick including teak wood bidding all around all as specified.

(f) Replacement of old unserviceable shutter of size 330 x 270 mm fabricated out of pre-laminated particle board with teak veneers both side of size 18 mm thick including teak wood bidding all around all as specified.

(g) Replacement of old leg frame of size of long rail 1000x100x40 mm and short rail 280x100x40 mm made of hardwood all as specified.

(h) Replacement of old unserviceable looking mirror size of 1200 x 450 x 5.0 mm thick fixed to the frame including moulded beading of size 50 x 45 mm and back side plywood size of 1200x450x12mm where required of table dressing MAP complete all as specified.

(i) French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Side Board MAP MAP Builtin Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified and directed by Engr-in-Charge. (a) Replacement of old unserviceable top or bottom of size 1250x430 mm and fabricated out of pre-laminated particle board exterior grade with teak veneers both side 18 mm thick work with screws and MS clamp (L Shape) complete all as specified.

(b) All as per item no 179(a) here in before but side runner size of 1500x430mm.

(c) All as per item no 179 (a) here in before but Shelves size of 1220x400mm.

(d) Replacement of old unserviceable plywood, 12 mm thick, commercial on back side of size 1250x1500 mm of the table complete all as specified.

(e) Aluminum anodized knob 25 mm of best quality.

(f) All as per item no 179 (a) here in before but drawers with CP Handle size of 600x400 mm.

(g) All as per item no 179 (a) here in before but shutter including 4mm thick tickwood beading (with polish) all around with CP Handle and magnatic catchup size of shutter 520x300 mm.

(h) All as per item no 179 (a) here in before but lower cabinet shelf size of 360x590 mm.

(j) Replacement of old leg frame of size of long rail 1000x100x40 mm and short rail 380x100x40 mm made of hardwood all as specified.

(k) Replacement of old unserviceable upper cabinet glass size of 660x290x 5mm thick glass door with double aluminium channel including rolling wheel exisiting side board shape and size shown on drawing with suitable handle.

Book Shelf MAP MAP Builtin Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the book shelf complete all as specified and directed by Engr-in-Charge. (a) Replacement of old unserviceable top, bottom and shelves with 4mm thick teakwood beading with polishing of size 750x270 mm and fabricated out of pre-laminated particle board exterior grade with teak veneers both side 18 mm thick work with screws and MS clamp (L Shape) complete all as specified.

(b) All as per item no 189 (a) here in before but side runner size of 1050x280 mm.

(c) Replacement of old unserviceable plywood, 6 mm thick, commercial on back side of size 1050x750 mm of the bookshelf complete all as specified.

(d) Replacement of old leg frame of size of long rail 700x100x40 mm and short rail 170x100x40 mm made of hardwood all as specified.

M/S Shri Balaji Enterprises

L.BHIMSEN

F.M. KHAN SONS