Electrical Works at State Health Society NHM Nagrota.

Amount

Supply Installation, Testing and commissioning of Pre-wired recess mounth 2ft x 2ft. LED Panel fitting with Drives etc including connections with 1.5sqmm . FRLS PVC Insulated Copper conductor single cove cable and earthing etc as required. Make wipro/Havells/ Jaquar/ Phillips / HPL

Supply, Installation, Testing and Commissiong of Pre- wired reecrs mounted LED ceiling Light 12W including connections with 1.5 sqmm PRLS PVC Insulated copper conductor single cove cable and earthing as required. Make : Wipro/ Havells/ Jaquar/ Philips/ HPl.

Supply, Installation, Testing and Commissioning of Wall Fan. Make: Havells/ORIENT/V-Guard/ Standard

Supply, Installation, Testing and Commissiong of Ceiling fan, capautor type soctable for Low voltage operation including wiring the down rods of Standard Length (upto 30cm) with 1.5 sqmm FRLS PVC Insulated copper conductor single cove cable including P/F Phenolic Laminated sheet cover on the fan box etc as required (1200mm sweep 5 Star) Make: Havells/V-Gaurd/ Orient/ Standarad

Supply, Installation, Testing and Commissiongof Split Air Conditioners(Hot & Cold) Make: Diakin/o-General/L.G/Voltas

Supply, Installation, Testing and Commissiong of Exhaust Fan with Louvers of following sizes including connections etc as required (complete job) 300 mm Make: Havells/V-gauard/Orient /Standarad

Supply, Installation, Testing and Commissiong of Digital Automatic Stanlozer of following ratings Make: V-gauard/Mocrotek /Livgaurd

4 KVA (90 v to 290 volt)

5 KVA (90 v to 290 volts)

Supply, Installation, Testing and Commissiong of 12.7 mm and 6.4 mm dia Copper Pipe for Non-VRV Air Conditioning System (Compete Job) ISI

Supply, Installation, Testing and Commissiong of Fire Extinguisher,ABC Dry Powder Type of 6 kg Make: SAVMAX/Life guard/Cease fire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (ISI).

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required (ISI).

Supplying , Installation, Testing ,making Internal wiring connection and Commissioning of wall mounted distribution panel board with following details suitable for 415 Volt 3-phase-4 wire 50 Hz AC Supply

Panel fabrication details

Size 914 mm X 914 mm X 610 mm

MSCR Sheet

Main Frame 16 guage sheet with lifting

Partition with Hooks 16 guage sheet

Gland & plates 16 gauge Sheet

Power coating Simens grey

Material list for panel board

Providing and fixing following rating breaking capacity and poles MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including panel board including drilling holes in cubical panel making connection etc as required. 100 A, 30KA,FPMCCB 1 no. (ISI)

Providing and fixing capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubical panel making connections etc as required

63 A TP&N= 1 no.

32 A TP&N = 1 no.

Onload changeover Swtich - 4 pole 63 AMP :- 1 No. (ISI)

Volt meter 1 No.

Ammeter 1 No.

Indicator Lamp 1 set

The panel Board should include all wiring with respect to load & all allied accessories for Complete Job.

Panel fabricator CPRI Approved

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (ISI)

Double pole

Single Pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A (ISI)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required) (ISI)

12 way (4 + 36), Double door

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

200 A, 25 KA,TPMCCB (ISI)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. (ISI)

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

M/S M M TELECOM

NT ELECTRICALS