CONSTRUCTION OF DOGSHELTAR/ DOG ABC CENTER AT OLD APMC NEAR GUTTALA ROAD IN HAVERI CMC LIMIT

CONSTRUCTION OF DOGSHELTAR/ DOG ABC CENTER AT OLD APMC NEAR GUTTALA ROAD IN HAVERI CMC LIMIT

Demolishing lime concrete manually/ by mechanical means and disposal of material to the appropriate disposal area as per direction of Engineerin- charge. (Page No.187. Iitem no.19.1 of Vol-2-CSR-KPWD...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Supplying at site Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. comp...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (0.05 percent) total coated thickness with zinc coating 1...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 200mm (Page No.218. Iitem no.22.15.3 of Vol-2-CSR-KPWD 2023-2...

Hose pipe 30m length (Page No.A-25. Iitem no.450 of Vol-2-CSR-KPWD 2023-2024)

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick work or brick flooring with cement mortar 1 3 (1 cement 3 fine sand) after raking joints to depth nicely lining, including cos...

Providing Colour washing such as green, blue or buff to give an even shade New work (two coats) with a base coat of whiting with colour of approved quality, after thoroughly brooming the surface to r...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS 15622, of approved make, in all colours, shades, e...

Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mm long...

Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat mo...

In dado/skirting on 12 mm thick mortar 1 4 (1 acid proof cement 4 coarse sand) with Acid and alkali resistant tile Colour glazed tile 30x45 cms 6mm thick with border of size 30 x 10 cms (Page No.60 ...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing plywood 4 mm thick, one side decorative veneerconforming to IS 1328 (type-1), for plain lining / cladding with necessaryscrews, including priming coat on unexposed surface with D...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the...

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1 6 including cutting the patches in proper shape and replastering the surface of the wall includi...

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as p...

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required,...

Repairing door and window frames with available wood to the required size. (CSR 2023-24 ,Vol-2 I.no-20.102 and Pg No -207)

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. (CSR 2023-24 ,Vol-2 I.no-20.103 and Pg No -207)

Repair of pull and push type rolling shutters of made of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel l...

Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One coats on old work as per specifications and as per directions of Engineer in charge...

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust,...

Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete(CSR 2023-24 ,Vol-5, I.n...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of appr...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work over an under coat of suitable shade with ordinary paint of app...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Providing and supplying Toilet cleaner of reputed make capable of killing bacteria, germs as per direction of Engineer in charge of work(Vol-2 I.no-22.51 and Pg No -221)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge.(Vol-2 I.no-20.40 and Pg No -20...

Technical Specification of the Product - Shade Nets for Agriculture and Horticulture as per IS 16008 (Part 2) (Shade Nets Made From Mono Filament Yarns) BIS Certification No Type (As per cause 4 of 16...

Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-69...

Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-69...

6A Pendant Holder (CSR-KPWD - Electrical SR, 2023-24 Page No.10, Item No. 3.14.6).

6A Batten Holder, (CSR-KPWD - Electrical SR, 2023-24 Page No.10, Item No. 3.14.7).

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate with required nos.of machine screws, bolts nuts etc., complete on the existing met...

Supplying and fixing superior quality modular switch mounting polycarbonate platewith necessary supporting backplate with required nos.of machine screws, bolts nuts etc., complete on the existing meta...

Supplying and fixing superior quality modular switch mounting polycarbonate platewith necessary supporting backplate with required nos.of machine screws, bolts nuts etc., complete on the existing meta...

Supplying and fixing superior quality modular switch mounting polycarbonate platewith necessary supporting backplate with required nos.of machine screws, bolts nuts etc., complete on the existing meta...

Supplying 6A flush type socket and 6A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using ...

Supplying and fixing of modular switch and connected accessories on existing modular switch platee..(AS per IS 3854 and IS1293) -6/16A Universal Socket (CSR-KPWD - Electrical SR, 2023-24 Page No.09...

Supplying and fixing of modular switch and connected accessories on existing modular switch platee..(AS per IS 3854 and IS1293) -6 Amps One way Switch (CSR-KPWD - Electrical SR, 2023-24 Page No.09,...

Supplying and fixing of modular switch and connected accessories on existing modular switch platee..(AS per IS 3854 and IS1293) -16A One Way Switch (CSR-KPWD - Electrical SR, 2023-24 Page No.09, I...

Supplying 4mm thick white plastic plate and covering for junction boxes of size......mm conduit using necessary machine screws.-60 mm (CSR-KPWD - Electrical SR, 2023-24 Page No.09, Item No.3.10.1).

open conduite System upplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, Junction boxes, adhesive paste etc., and fixing using invert...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (CSR-KPWD - BWSSB SR, 2023-24 Page No.1...

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (CSR-KPWD - BWSSB SR, 2023-24 Page No.117,...

Supplying PVC flexible condui tpipe....mm dia fixingon surface over inverted tapered wooden plugs or phill plugs or rawl plugsa nd clamped using heavy gauge saddles atan interval of 300 mm using NF sc...

Supplying Galvanized steel flexible conduitpipe....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 ...

Supplying and fixing PVC/metal conduit Deep junction box - 19/20 mm deep Junction box (CSR-KPWD - Electrical SR, 2023-24 Page No.2, Item No.1.5.1).

Nylon Cable Tie (100 Nos) (CSR-KPWD - Electrical SR, 2023-24 Page No.19, Item No.332 (43.34).

Supplying and fixing of modular switch and connected accessories on existing modular switch platee..(AS per IS 3854 and IS1293) -400W Dimmer (CSR-KPWD - Electrical SR, 2023-24 Page No.09, Item No.3...

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe/kitchen shutters including necessary synthetic resin hot pressed to edges on binding mach...

C Suspension Clip.(CSR-KPWD - Vol-2 SR, 2023-24 Page No.A-16, Item No.149).

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operationon 230V, 50cycles. Singlephase AC supply conforming to ISS-374-1979 and with double ball bearing...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Supplying and fixing of retro fit type-LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70 percent . efficacy greater than 80l umen per W,...

Supplying and fixing of retro fit type-LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70 percent . efficacy greater than 80l umen per W,...

Supplying of .......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80. Power I...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.RJ45/ 1.O Outlet Cat-6 (CSR-KPWD - Electrical SR, 2023-24 Page No.09, It...

GI/Copper strip for grounding connections, using necessary fixing materials as required.-600 x 600 x 3 mm Copper plate (CSR-KPWD - Electrical SR, 2023-24 Page No55, Item No.12.58.11).

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/woodenboard/flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MECB s single pahse/3...

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board -16/6A combined plug and socket with control switch (CSR-KPWD - Electrical SR, 2023-24 Page No.10, Item No.3...

Nuts and bolts (CSR-KPWD - Vol-2 SR, 2023-24 Page No.A-29, Item No.564).

Earthing -Supplying , fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit. The...

Supplying of.. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser, latest R410A...

Installation charges for split type air conditioner with allied works for one indoor and one out door unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. (CSR-KP...

Supplying and installation of insulated refrigeran tcopper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...

Supplying and drawing PVC insulated flexible copper wire of approved make as per IS 694 2010 -14/0.0040 (CSR-KPWD - Electrical SR, 2022-23 Page No.6, Item No.2.4.1).