Conversion and provision of Fish market into Vehicle parking area to the Tmt Kamala Nehru Thirumana Nilayam at Bahour

Amount

CodeNo:2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil

CodeNo:4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

CodeNo:5.1.3 Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering ,shuttering , finsishing and reinforcement - All work upto plinth level 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

CodeNo:5.2.3 Reinforced cement concrete work in walls (any thickness) , including attached ilasters, buttresses , plinth and sting courses , fillets ,columns , pillars ,piers ,abutments , posts and struts etc.upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:2:4 (1 cement : 2coarse sand :4 graded stone aggregate 20mm nominal size)

CodeNo:5.9.1 Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete

CodeNo:5.9.5 Centering and shuttering includingstrutting , propping etc and removal ofform for - Lintels , beams , plinth beams , girders , bressumers and catilevers

CodeNo:5.9.6 Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts

CodeNo:5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or mor

CodeNo:6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)

CodeNo:5.12 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands,copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

CodeNo:11.40.1 Providing and laying rectified ceramic rustic / matt finish floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make (Somany / Nitco) in all colours ,shades, except white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete

CodeNo:10.25.2 Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Code No: 13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand)

Code No: 13.9.2A 15 mm cement plaster on the rough side of single or half brick wall of mix 1:5 (1cement : 5 fine sand)

CodeNo:13.39.2 Colour washing such as green, blue or buff to give an even shade - New work (two or more coats) with a base coat of whiting

Code No: 30.7 Supply of Quarry rubbish including stacking to department gauge for remeasurement and spreading required thickness