Upgradation of various departmental Building and other Infrastructure under Jurisdiction of Irrigation Division Kathua.

Amount

Earth work in excavation by manual means over areas (Exceeding 30cm and upto 1.5mtr. in depth,1.5 Mtr in width as well as 10 Sqm on plan) including disposal of excavated earth upto 1 Mtr for cutting edge, disposed earth to be levelled and neatly dressed in. i) All kind of soils

Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with half tonne roller or wooden or steel rammers and rolling every third and top- most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions lead upto 50 mtr and lift upto 1.5 Mtr in : All kinds of soil. But excluding ramming & watering.

Surface dressing of the ground including removing vegetation and in - equalities not execeeding 15Cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m in all kinds of soil

Ploughing the existing ground to a depth of 15cm to 25Cm and watering the same in all kinds of soil.

Clearing grass and removal of the rubbish upto a distance of 50mtr. Outside the prephery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Crushed.

Centering and shuttering incl. strutting, propping etc and removal of form work for:- a) For foundations, footings bases of columns

Centering and shuttering incl. strutting, propping etc and removal of form work for:-Columns, Pillars, Piers, abutments, posts and struts

Providing and laying damp – proof course 50mm thick with cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Crushed

Extra for providing and mixing water prrofing material in cement concrete work in doses by weight of cement as per manufactures specification.

Reinforced cement conc. work in beams suspended floors, roofs having slope up to 150 landings balconies, shelves, chajjas, lintels, bands plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 Cement:2 coarse sand : 4 graded stone agg.20mm nominal size).

Reinforced cement conc. work in arches, archirbs, domes, valuts, shells, folded plate and roofs having slope more than 150 upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 Cement:2 coarse sand : 4 graded stone agg.20mm nominal size).

Reinforcement for R.C.C. Work including straightening cutting bending placing in position and binding all complete Cold twisted bars

Brick work with common burnt clay F.P.S (Non-Mudular) bricks of class designation 75 in foundation and plinth in Cement mortar 1:4 (1 Cement : 4 Coarse sand).

Providing woof work in frames o fdoors, windows, cerestory windows and other frames, wrought framed and fixed in position with hold fast lygs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). Sal Wood.

Providing and fixing panelled or panelled and glazed shutters for ddoors, windows and cerestory windows including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer in charge. Secong Kail Wood.

Particle Board 12mm thick. Plain Particle board flat pressed, 3 layer or graded wood particle board medium density Grade I,IS 3087 marked.

Glazed shutters with IS marked M.S pressed butt hinges bright finished or required size with necessary screws. Second Class Deodar wood.

IS marked M.S pressed bright finished butt hinges with necessary screws of required size. Second Class Kail Wood.

Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S Screws including drillling holes in maasonary work/ CC/R.C.C and making good, etc complete. 32mm Long.

Providing and fixing plain jaffri of 35x1 0 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with Second class deodar wood.

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1 ), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with: 9.32.1 Decorative veneer facings of approved manufacture

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete 150 mm

Providing and fixing lSI marked oxidised M.S. door latches conforming to IS : 5930 with screws etc. complete 300x20x6 mm

Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

Medium shade pigment with 50% white cement and 50% ordinary cement. (a) Crushed

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade

Finishing walls with water proofing cement paint of required shade Old work (one or more coats) applied @2.20 kg/1 Osqm over priming coat of primer applied @ 0.80 litres/1 0 sqm complete including cost of priming coat

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/1 Osqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement: 4 coarse sand).

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding holdfasts in cement concrete blocks of size 15x1 Ox1 Ocm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to ' sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead: Door chowkhats

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding holdfasts in cement concrete blocks of size 15x1 Ox1 Ocm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to ' sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead: Window chowkhats

Making the opening in brick masonry including dismantling, fixing chowkhats in floor or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement:3coarse sand : 6 stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface : For door

Making the opening in brick masonry including dismantling, fixing chowkhats in floor or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement:3coarse sand : 6 stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface : For window

Renewing glass panes, with wooden fillets wherever necessary : Glass panes weighing 10 kg I sqm

Supplying and fixing new wooden fillets wherever necessary : Wood fillets

Supplying and fixing new wooden fillets wherever necessary Refixing old glass panes with putty and nails

Providing and fixing plain jaffri door and window shutters including bright or I and black enamelled M.S. butt hinges with necessary screws 35x1 0 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with Second class teak wood

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. :-

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead in cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area of 3 sq. metres and below

Fitter

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area of 3 sq. metres and below.

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing & disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid separately.)

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.

White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete 10 litre capacity -White

Providing and fixing G. I. inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing P.V.C Waste pipe for sink or wash basin including P.V.C waste fitting complete 40 mm dia

Providing and fixing soil, waste and vent pipes :Sand cast iron S&S pipe as per IS: 1729

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: Sand cast iron S&S as per IS: 1729

Providing and fixing single equal plain junction of required degree Sand cast iron S&S as per IS:3989

Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts & nuts complete : Sand cast iron S&S as per IS : 3989

Providing and fixing collar : Sand cast iron S&S as per IS: 1729

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 32 mm dia. nominal bore (Light)

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 a) 15 mm nominal bore

Disinfecting C.l. water mains by flushing with water containing bleaching powder@ 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory.100 mm diameter C.l. pipe

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Supplying and fixing C.l. cover without frame for manholes: 21.18.1 455x610mm rectangular C. I. cover (light duty) the weight of the cover to be not less than 23 kg.

Dismantling_ old C.!. pipes including excavation and refilling trenches including ramming and watering in layers not exceeding 20cm in depth after taking out the pipes,breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre.300 mm diametre C. I. pipe

For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.) 1. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, kg 428.25 minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg I sqm)

Providing and fixing aluminium tubular handle bar 32mm outer dia, 3.0mm thick & 21 OOmm long with SS screw etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium tabular handle bar

Providing and fixing aluminium casement windows fastner of required length for aluminium windows with necessaery screws etc. Complete Powder coated minimum thickness 50 micron aluminium

Mica Sheet (L.M.R)

Fevicol (L.M.R)

Carriage of Sand & Aggregiate av.10 Km. by M.T.

Carriage of Bricks av.6 Km. by M.T.

Lum Sum Charges for electrical fitting including material as per GST. Invoice.

ANIL SHARMA

TARSEM CHAND

VISHAL SINGH BHADWAL GOVT CONTRACTOR

AJAY KUMAR GOVT CONTRACTOR