Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC 20 SHANTI KUNJ WEST ARJUN NAGAR AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹30.6 L+₹76,215.15 (2.55%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹30.9 L+₹1.0 L (3.46%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹32.2 L+₹2.4 L (7.95%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹33.6 L+₹3.7 L (12.5%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹30,000
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Ashwin Awadh
GE (W) Agra
REPAIR TO WOODEN DOORS WINDOW AL DOORS WINDOW AND JOINERY RELATED WORKS IN AKBAR ROAD BARRACK ROAD LAL BARRACK ROAD RP COLONY AND OTM ACCN UNDER AGE BR -I (W) OF GE (W) AGRA
2024_MES_642929_1
8012/998/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Agra
₹30,000
19 Apr 2024
17 Feb 2024
16 Mar 2024
17 Feb 2024
9 Mar 2024
2 Mar 2024
Amount
Taking down chowkhats or frames not exc 1.5 Sqm each with shutters complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm c complete all as specified and directed by Engr-in-Charge.
Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description exc 1 Sqm but not exc 2 each complete all as specified and directed by Engr-in-Charge.
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick, 2nd class hard wood in glazed skelton shutters, open rebated and prepare to receive glass/gauge, with or without sash bar, edges of framing plain chamfered or rounded fitted with cut and mitred beads for scecuring glass etc. complete all as specified and directed by Engr-in-Charge.
M&L preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L welding in repairs not exc 2.5 cm in length and not exc 6mm thick c complete all as specified and directed by Engr-in-Charge.
M&L welding in repairs exc 2.5 cm but not exc 5.0 cm in length and not exc 6mm thick complete all as specified and directed by Engr-in-Charge.
Re-securing or easing and adjusting without taking down shutters of any description not exc 1.0 sqm each complete all as specified and directed.
Re-securing or easing and adjusting without taking down shutters of any description exc. 1.00 sqm but not exc 2.0 sqm each complete all as specified and directed by Engr-in-Charge.
S&F in repair 18/19 mm particle board, medium density, flat pressed, single layer type or three layers type, BWR grade fixed with adhessive complete all as specified and directed by Engr-in-Charge.
S&F in repair 12 mm thick pre laminated partical board medium density,flat pressed, single layer type or three layer type with BWR type adhesive, fixed in Aluminium frame with rubber packing & aluminium beading complete all as specified and directed by Engr-in-Charge.
S&F 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete and fixed to chowkats with welding or screws as per requirement complete all as specified and directed by Engr-in-Charge.
S&F in repairs 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete and fixed to chowkats with welding or screws as per requirement complete all as specified and directed by Engr-in-Charge.
M&L beads (any size) staright of 2nd class hard wood for glazed or gauzed joinery,renewed including mitres and removing old beads including polishing ,varnishing complete all as specified and directed by Engr-in-Charge.
S&F aluminium anodized 150mm long barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.
S&F in repairs aluminium anodized 150mm long barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.
S&F aluminium sliding door bolt, 300 mm plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate complete complete all as specified and directed by Engr-in-Charge.
S&F in repairs aluminium sliding door bolt, 300 mm plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate complete complete all as specified and directed by Engr-in-Charge.
S & F aluminium alloy handles size 150mm fabricated type anodised complete complete all as specified and directed by Engr-in-Charge.
S & F in repair aluminium alloy handles size 150mm fabricated type anodised complete complete all as specified and directed by Engr-in-Charge.
S&F butt hinges medium weight steel of 100mm size complete all as specified and directed by Engr-in-Charge.
S&F in repairs butt hinges medium weight steel of 100mm size complete all as specified and directed by Engr-in-Charge.
S&F galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staples complete all as specified and directed by Engr-in-Charge.
S&F in repairs galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staples complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed by Engr-in-Charge.
M&L 3mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F figured sheet glass 3.00mm thick pin headed type and glazing with oil putty complete all as specified and directed by Engr-in-Charge.
M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girth and applying two coat of synthetic enameled paint over one coatof red oxide primer complete all as specified and directed by Engr-in-Charge.
Eco-4000 Series windows fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513"D" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws.
Eco-4000 Series Ventilator fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513"D" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. complete all as specified and directed by Engr-in-Charge.
S&F mild steel hold fast and similar small article confirming to fe 410-0 or fe 310-0.complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively and as directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, incl fixing arrangement, suppling & fixing in opening as per specification complete all as specified and directed.
S&F in repairs aluminium anodized 100mm long barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.
S & F in repair aluminium alloy handles size 100mm fabricated type anodised complete all as specified and directed by Engr-in-Charge.
S&F in repairs butt hinges medium weight steel of 75mm size complete all as specified and directed by Engr-in-Charge.
Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-Charge.
Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engr-in-Charge.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick plastering in CM 1:4 with liquid WPC on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed by Engr-in-Charge. Note : WPC shall be measured and paid separately
Supply only water proofing compound complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of average 1mm thick Birla putty complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.
M&L cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed blocks for fixing hold fasts etc. complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .11 Sqm but not exc 0.18Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 20 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M & L for glazed ceramic coloured tiles joint free of size 450x350x7mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including rendering 10mm thick plastering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.
S & F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed. (Note: Sheet glass and veneered board will measured and paid separatly)
S&F powder coated aluminium three track sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.60mm thick, bottom rail of section 41mmx20mmx1.60mm thick, vertical style of section 38mmx20mmx1.60mm thick with aluminium anodised chowkhats of section 84.68mmx50mmx1.60mm thick including necessery jointing cleats, glazing clips, rubber packing , snap beading, screws handle and locking system etc, fitted with 5mm thick sheet glass tinted and other shutter with stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire stapples including using standard aluminium section. complete all as specified and directed.
S & F powder coated aluminium window fabricated out of aluminium section 1.60mm thick (double shutter double leaf) side hung type with stainless steel but hinge, one shutter glazed with and including 5mm thick plain sheet glass and other shutter with stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire stapples rubber gasket, stopper, aluminium anodised handle 100mm , aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 84.68mmx50mmx1.60mm thick, bottom rail of secftion 41mmx20mmx1.60mm thick, vertical sttyle of section 38mmx20mmx1.60mm thick all complete all as specified and directed by Engr-in-Charge.
S&F automatic floor mounted hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked, complete all as specified and directed by Engr-in-Charge.
S&F in repair automatic floor mounted hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked, complete all as specified and directed by Engr-in-Charge.
S&F automatic hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked,,suitable for door shutters of 851 to 1000mm in width and of weight between 61 kg to 80 kg complete all as specified & directed.
S&F in repair automatic hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked,suitable for door shutters of 851 to 1000mm in width and of weight between 61 kg to 80 kg complete all as specified and directed by Engr-in-Charge.
S&F 5.50 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area n exc 0.5 sqm in each plane complete complete all as specified and directed by Engr-in-Charge.
S&F in repair 5.50 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area exc 0.5 sqm in each plane complete complete all as specified and directed by Engr-in-Charge.
S&F 100 mm long Mortice latch with four levers (vertical type) , aluminium body and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 100 mm long Mortice latch with four levers (vertical type) , aluminium body and fixed complete all as specified and directed by Engr-in-Charge..
S&F in repair mild steel PVC coated drapery rods, 20/25 mm internal diameter including decorative type brackets, clamps including fixing arrangement with drilling holes in walls, brackets and knob complete fitting etc complete of approved quality and colour as directed by Engr-in-Charge.
M/s S. K. Construction Co.
BOXMARK CONSTRUCTIONS
Chandra bhan agrawal
M/s Sharda Costruction Company
Jai Kali Maan contractor
N.K. ENTERPRISES
R.S BUILDERS
Asha Construction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .