REPAIR TO BOUNDARY WALL AND FENCING AOR OF AGE B/R II AREA DAMAGE DUE TO ELEPHANT DEPREDATION AND MAINT OF MES INSTALLATIONS UNDER GE NARANGI

Amount

Demolition of brick work, built in cement mortar, including all quoins, arches, pillars including coping etc. complete all as specified and as directed..

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

Dismantling of Fencing posts or struts (wood, steel RCC) any section, posts embeded in natural ground etc, including taking out embeded portion and making good distrubed ground complete all as specified and as directed.

Dismantling of fencing wire mesh, any type etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed..

Material and labour for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM (1:6) etc complete all as specified and directed..

All as per item No 09 here in before but except bricks. Note: Old serviceable bricks as obtained from demolition under item no. 01 here-in-before shall be reused under this item complete all as specified and as directed..

Material and labour for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc complete all as specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of cement primer etc complete all as specified and as directed.

Material and labour for Pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed.

Material and labour TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..

Supply and fix mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed.

Supply only galvanised chain link fencing of mesh size (100mmX100mmX4.00mm /75mmX75mmX3.15mm) etc complete all as specified and as dicected.

Fixing only galvanised chain link fencing of mesh size (100mmX100mmX4.00mm /75mmX75mmX3.15mm)) size and any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and as directed.

Supply and fix in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and orovising of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.. (each line of wire to be measured separately)

Restraining and resecuring existing barbed wire of any description including making good stapples etc complete all as specified and directed.

Supply and fix posts and struts as in fencing including cutting tops to shape as directed., drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type C-1, ( using 20 mm grades stone aggregates) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and base) etc complete all as specified and as directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or spuare heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not n.exc 5 cm long and diameter of shank 5 to 10 mm complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete1:4:8 type D- 2, (using 40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed.

Material and labour for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment incl 50 mm thick M Sand cushioning etc complete all as specified and as directed.

Material and labour for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 etc complete all as specified and as directed.

Cleaning and repairing valve chamber inside and surrounding by removivng small plants/bushes and patch work including plastering and white washing inside and external surface inclduing two coat of synthetic enamel paint inside and out side of valve chamber cover etc complete all as directed. of size 1000 x1000 x 900mm. Note : MS works if any will be measured and paid seperately under relevant item.

All as per item No.31 but of size 900 x900 x 900mm.

All as per item No.31 above but of size 1500 x1500 x 1200mm.

All as per item No.31 above but of size 1200 x1200 x 1000mm.

Material and labour for cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate ) in foundations, filling and mass concrete for pole foundation complete all as specified and directed..

Material and labour for cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate ) in foundations, filling and mass concrete for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges of pole complete all as specified and directed..

Demolition of cement concrete, brick pillars in support pillar in water line, base of pit chambers of any thickness, including plastering and leeping (whether full thickness removed or only a prt thereof) incude removing from site complete all as specified and directed..

Supply and fixing LED flood light 100 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant include MS bracket , nuts & bolts fixed on wall or OHT pillar, or MS structure complete with driver and lamp including taking down old light fitting complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including taking down old light fitting complete all as specified and directed.

Supply and fixing LED flood light 180 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including taking down old light fitting complete all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp including taking down old light fitting complete all as specified and directed.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old cable complete all as specified and as directed..(Note: Excavation & Thimbles to be measured and paid under relavent items of this schedule)

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old cable complete all as specified and as directed..(Note: Excavation & Thimbles to be measured and paid under relavent items of this schedule)

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed..

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed. at a level not exceeding 1.5 metre above the starting point all as specified and as directed.

Material and labour for for sand cushioning with dry river sand in trenches for cushioning of underground cable including spreading, leveling, punning complete all as specified and as directed.. Note : Punned thickness will be measured and paid.

Material and labour well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm including taking down complete all as specified and directed.

Supply and fixing SPN DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar including taking down complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed..

All as per item no 51 but Isolator SPN upto 40 AMP.

Supply and fix sign board of size 0.6 Mtr x 0.9 Mtr of MS Sheet 3.15mm thick alongwith supporting ms round pipe of size 40mm dia of height 1.5 Mtr height and all around MS Sheet include paiting with 2 coat of sky blue in colour basckground and written words with white colour as per details of Installtions complete all as specified and directed.

Supply, laying, testing and commissioning of M S ERW Pipes class 'C' confirming to IS : 1239 (Part-I) of 2004 /3589of 2001 of heavy grade with all fittings laid in floors or fixed to walls and trenches etc of 400mm sizes dia bore for Errecting Water Header by MS ERW pipe of length 12 Mtr approx long and 8 mm thick by cutting suitable size hole by mechenical mean or by gas cutting and fixing suitable size nipple of length 8" to 12" of sizes 150 to 350mm as existing through weding with header and fixing flange of suitable sizes. Making inlet & outlet connections on both ends and on header for various lines, flushing out connection alonwith dead plate fixed with nuts & bolts & 01 No spare with complete fittings such as bends, tees, dead plate, elbows, reducers, flanges, anchor, fasterners, RCC thrust blocks for pipes, wooden blocks, special fittings, suspension hangers with suitable supports etc. including painting with two coat of synthetic enamel paint over a coat of red oxide primer as per approved colour code complete all as specified and directed.. Make :-TATA / Jindal / Prakash /Zenith Note : (i) MS ERW Pipes of various sizes fixed in header upto 12" to be included in quoted rates. (ii) MS Flange , Nuts & bolts to be measured and paid under relevant items. (iii) Cutting existing pipe through welding and making connection on hyder to be included in quoted rates. (iv) Sluice valve of various sizes be measured and paid seperately under relevant items. (v) Contractor submitt drawing for approval before start work. (vi) Temporarly arrangement to be made by the contractor to keep station water supply smoothly. In failure of water supply necessary penelty of Rs 10000/- per day will be charged to contractor. (vii) Pipe below tank and nearby under hardstanding should not be drawn out due to structural stability of PSS tank. Hence pipe of size 400mm dia be laid over hardstanding and connected pipelines to be rerouted. Any damages to hardstanding be making good with PCC and rates to be included in the quoted rates.

Taking out old UNSV Pressure gauge and Supply and fix Bourdon dia type pressure gauge 100mm dia, suitable for range 0-14 Kg rating liquid filled with brass isolation valve and pipe , fixed in repair, if required making another hole of suitable size and making good to old hole , complete all as specified and directed.. Note : Rates include clamp, valve, hole making include welding complete all as specified and directed.. Make : FIGBIG/TAYLOR/H.GURU

Supply and fix 100 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head and Stainless Steel spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing including taking out old unserviceable sluice valve from any position complete all as specified and directed..

Supply and fix 200 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head and Stainless Steel spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing including taking out old unserviceable sluice valve from any position complete all as specified and directed..

Supply and fix 250 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head and Stainless Steel spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing including taking out old unserviceable sluice valve from any position complete all as specified and directed..

Supply and fix 300 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head and Stainless Steel spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing including taking out old unserviceable sluice valve from any position complete all as specified and directed..

Taking down old UNSV CI fitting with lead joint and replacement with DI fitting of same size with tyten joint / flanged joints with nuts & bolts, washers pipe of sizes 200mm bore complete all as specified and directed. .Note : Excavation, returning filling, nuts & bolts, washes to be included in the quoted rates but DI fitting to be measured and paid under relevant items.

Taking down old UNSV CI fitting with lead joint and replacement with DI fitting of same size with tyten joint / flanged joints with nuts & bolts, washers pipe of sizes 250mm bore complete all as specified and directed. .Note : Excavation, returning filling, nuts & bolts, washes to be included in the quoted rates but DI fitting to be measured and paid under relevant items.

Taking down old UNSV CI fitting with lead joint and replacement with DI fitting of same size with tyten joint / flanged joints with nuts & bolts, washers pipe of sizes 300mm bore complete all as specified and directed. .Note : Excavation, returning filling, nuts & bolts, washes to be included in the quoted rates but DI fitting to be measured and paid under relevant items.

Supply and fixing in repair to MS Flanges suitable for MS pipe size 100mm dia bore including fixing on pipe through welding complete all as specified and directed.

Supply and fixing in repair to MS Flanges suitable for MS pipe size 150mm dia bore including fixing on pipe through welding complete all as specified and directed.

Supply and fixing in repair to MS Flanges suitable for MS pipe size 200mm dia bore including fixing on pipe through welding complete all as specified and directed.

Supply and fixing in repair to MS Flanges suitable for MS pipe size 250mm dia bore including fixing on pipe through welding complete all as specified and directed. .

Supply and fixing in repair to MS Flanges suitable for MS pipe size300mm dia bore including fixing on pipe through welding complete all as specified and directed.

Material and labour for DI fittings for spigot and socket pipes/ flanged pipe of size upto 200 mm bore to 300mm bore such as bends(any type,radius and angle) tapers any type (straight, bend, increasing,decreasing or double socket etc) Tee pieces single branch, 'Y' junction ,double branch, cross(all sockets or socket and spigot) collars caps and plugs complete all as specified and directed.

Material and labour for MS studs nuts and bolts of any size and any length with suitable Mild Steel washer of any size for jointing of flange pipes/valve gland etc, as directed.

Taking up / down the 100mm size CI/DI/MS water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion by burning lead joints/ tyton joint/rubber gasket joint or kept aside for further disposal complete all as specified and directed. by the Engr-in-Charge. (Note: Necessary earthwork, if any , will be measured and paid separately under relevant items) .

Taking up / down the 150mm size CI/DI/MS water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion by burning lead joints/ tyton joint/rubber gasket joint or kept aside for further disposal complete all as specified and directed. by the Engr-in-Charge. (Note: Necessary earthwork, if any , will be measured and paid separately under relevant items) .

Taking up / down the 200mm size CI/DI/MS water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion by burning lead joints/ tyton joint/rubber gasket joint or kept aside for further disposal complete all as specified and directed. by the Engr-in-Charge. (Note: Necessary earthwork, if any , will be measured and paid separately under relevant items) .

Taking up / down the 250mm size CI/DI/MS water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion by burning lead joints/ tyton joint/rubber gasket joint or kept aside for further disposal complete all as specified and directed. by the Engr-in-Charge. (Note: Necessary earthwork, if any , will be measured and paid separately under relevant items) .

Taking up / down the 300mm size CI/DI/MS water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion by burning lead joints/ tyton joint/rubber gasket joint or kept aside for further disposal complete all as specified and directed. by the Engr-in-Charge. (Note: Necessary earthwork, if any , will be measured and paid separately under relevant items) .

Relaying of the 100mm bore size CI/DI water mains after thoroughly cleaning, with new fittings fixed to wall/ceiling/floor or laid in trenches including new tyton rubber gasket/ lead joints, CI/DI pipes and reducing to required length in position for insertion of new tees, branches, etc. before laying complete all as directed. by Engr-in-Charge. Note : Excavation , earth work and DI fittings will be measured and paid seperately.

Relaying of the 200mm bore size CI/DI water mains after thoroughly cleaning, with new fittings fixed to wall/ceiling/floor or laid in trenches including new tyton rubber gasket/ lead joints, CI/DI pipes and reducing to required length in position for insertion of new tees, branches, etc. before laying complete all as directed. by Engr-in-Charge. Note : Excavation , earth work and DI fittings will be measured and paid seperately.

Relaying of the 250mm bore size CI/DI water mains after thoroughly cleaning, with new fittings fixed to wall/ceiling/floor or laid in trenches including new tyton rubber gasket/ lead joints, CI/DI pipes and reducing to required length in position for insertion of new tees, branches, etc. before laying complete all as directed. by Engr-in-Charge. Note : Excavation , earth work and DI fittings will be measured and paid seperately.

Relaying of the 300mm bore size CI/DI water mains after thoroughly cleaning, with new fittings fixed to wall/ceiling/floor or laid in trenches including new tyton rubber gasket/ lead joints, CI/DI pipes and reducing to required length in position for insertion of new tees, branches, etc. before laying complete all as directed. by Engr-in-Charge. Note : Excavation , earth work and DI fittings will be measured and paid seperately.

Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 100 mm duly painted by two coats of synthetic enamel of desired tint over a coat of red primer complete all as specified and directed..

Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 150 mm duly painted by two coats of synthetic enamel of desired tint over a coat of red primer complete all as specified and directed. .

Supply and lay M S ERW Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 200 mm duly painted by two coats of synthetic enamel of desired tint over a coat of red primer complete all as specified and directed..

Supply and lay M S ERW Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 250 mm duly painted by two coats of synthetic enamel of desired tint over a coat of red primer complete all as specified and directed..

Supply and lay M S ERW Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 300 mm duly painted by two coats of synthetic enamel of desired tint over a coat of red primer complete all as specified and directed. .

Taking out old UNSV MS Angle/ channel/ Sheet from Open well & Jack well sumps and supply & fabricated MS Covers from 50x50x6mm thck MS Angle Iron frame, MS sheet of size 3mm thick, MS rods, (Fe.290.Gde-E-165) include handle for lifting complete include painting with one coat of Red oxide paint and two coat of synthetic enamel paint as per existing size complete all as specified and directed.. (Note : Job include cutting corroded structure by welding, fabrication of new structure by welding, cutting and fixing with suitable arrangements).

Supply and fix in replacement of cast iron non return valve 200 mm dia both side flanged (ISI Marked) confirming to IS 5312 (Pt-I) including nut & bolts complete all as specified and directed.

Material and labour for motorized valve from valve pit kept aside for reuse after necessary repair work of size 250mm/200mm dia complete include MS work and cable connections including taking down complete all as specified and directed. . Testing and commissioning complete all as specified and directed.. Note : Cable to be measured and paid seperately.

Material and labour for cast iron air valves with two air outlets confirming to IS 14845 of size 80 mm dia bore and fixing Up in MS ERW water supply mains of size 250mm to 300mmdia bore line including making hole and welding complete all as specified and directed.

Supply and laying or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated single stranded copper conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm 4 core nominal cross section including taking down complete all as specified and directed.

M/S ANJALI CONSTRCUTION (BID ID -3479921)

A K ENTERPRISE (BID ID -3488087)

M/S K D ENTERPRISE (BID ID -3483395)