CWE/HSR/ALW-41 OF 2023-24 REPAIR OF WOODEN FURNITURE, CANNING, POLISHING AND ALLIED WORKS AT ITARANA ALWAR

Amount

M & L for removing carefully following existing broken/unserviceable components/members of Chair dinning and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Cane :- Cane as per IS shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per FD-228/279.

Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) as per FD-228/279.

Font leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) as per FD-228/279.

Front/ Back top rail as per existing size and shape as per FD-228.

Left/Right top rail as per existing size and shape as per FD-228.

Upper/ Lower Stiffner for back support as per existing size and shape duly furnished and polished.as per FD-228/279.

Centre Stiffener 16mmx25mmx25mm as per existing size and shape as perFD-228.

Side Stiffner for leg - 400mmx25mmx19mm as per existing size and shape as per FD-228.

PVC Ring/ Rubber shoe as per FD-228.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour and directed by engr-in-charge

M & L for removing carefully following existing broken/unserviceable components/members of Chair Writing and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Cane :- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per FD-202/280.

Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) as per FD-202/280.

Front leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) as per FD-202/280.

Side Stiffener for bottom legs as per size and shape duly furnished and polished.as per FD-202/280.

Centre Stiffener for bottom legs as per size and shape duly furnished and polished.as per FD-202/280.

PVC Ring/ Rubber shoe as per FD-202/280.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.as per FD-202/280.

M & L for removing carefully following existing broken/unserviceable components/members of Chair Easy and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Cane (Seat and Back):- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg.

Front/Rear leg of size 55mm x 25mm x 535mm long made out of 1st class hardwood (Teak)

Left/Right arm rest of size 610mm x 55mm x 25mm made out of 1st class hardwood (Teak).

Front rail of size 520mm x 50mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.

Rear rail of size 500mm x 70mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.

Side rail of size 530mm x 70mm x 40mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.

Back frame of size 480mm x 55mm x 19mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.

PVC Ring/ Rubber shoe as per Drg.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing broken/unserviceable components/members of Chair Easy cushioned and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Rear leg of size 70mm x 25mm x 490mm long made out of 1st class hardwood (Teak).

Front leg of size 70mm x 25mm x 545mm long made out of 1st class hardwood (Teak).

Left/Right arm rest of size 610mm x 65mm x 25mm made out of 1st class hardwood (Teak).

Front rail of size 510mm x 70mm x 25mm made out of 1st class hardwood (Teak).

Rear rail of size 480mm x 70mm x 25mm made out of 1st class hardwood (Teak).

Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak).

Seat shall be 50mm thick respectively synthetic foam of 28 density fixed over wooden frame and it shall be covered with leatherised rexine of approved shade and as per drawing.

Back shall be 50mm thick respectively synthetic foam of 28 density fixed over wooden frame and it shall be covered with leatherised rexine of approved shade and as per drawing.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing broken/unserviceable components/members of Chair dinning cushioned and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Rear leg of size 30mm x 40mm x 900mm long made out of 1st class hardwood (Teak).

Front leg of size 30mm x 40mm x 325mm long made out of 1st class hardwood (Teak).

Front rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).

Rear rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).

Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak).

Vertical strips 15 x 30mm and 460mm long made out of 1st class hard wood (teak).

Seat shall be 75mm thick 32 density foam with fabric of approved sample on seat of 12mm thick phenol bonded plywood.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Bin linen multipurpose and supply and fixing new components/members duly finished complete all as shown on drawing and directed :-

Top of size 1200mm x 450mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround as per IS.

Sides of size 675mm x 450mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) as per IS.

Shutter of size 675mm x 400mm made out of 18mm thick prelaminated MDF board one as per IS side decorative of approved shade (exterior grade) with handle mild steel chromium plated and magnetic catcher as per drg.

Shutter of size 540mm x 400mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) with handle mild steel chromium plated and magnetic catcher as per drg.

Drawer of size 100mm x 400mm on stainless steel channel runner.

Stiffener made out of 1st class hard wood (teak) of size 25mm x 25mm x 1200mm.

Back of size 1200mm x 675mm made of plywood 12mm thick commercial both sides.

Bottom of size 1200mm x 450mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade).

Leg 1200 x 450 x 75mm made out of 1st class hardwood (Teak)

Shelf of size 750mm x 410mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).

Shelf of size 410mm x 364 made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).

M & L for removing carefully following existing unserviceable components/members of Bed (with ply wood top and supply and fixing new components/members complete all as shown on drawing and directed:-

Head rest legs as per existing size and shape duly furnished and polished.

Foot rest legs as per existing size and shape duly furnished and polished.

Long rail as per existing size and shape duly furnished and polished.

Short rail 830 x 90x 35 mm made out of 2nd class hard wood as per drg.

Centre Stiffener to support ply wood bed top as per existing size and shape duly furnished and polished.

Cleat of Steel between rail and legs for tighting of bed.

Plywood Top 12mm thick BWR 1st grade as per existing size and shape.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Side board with drawer andsupply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Top of size 1220mm x 445mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.

Sides of size 595mm x 455mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).

Shutter of size 775mm x 585mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) duly furnish and polished.

Drawer of size 115mm x 385mm duly furnish & polished as per drg.

Drawer of size 180mm x 385mm duly furnish & polished as per drg.

Stiffener made out of 1st class hard wood (teak) of size 25mm x 45mm x 1220mm.

Back of size 1220mm x 635mm made of plywood 6mm thick commercial both sides.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing unserviceable components/members of Sofa set and supply and fixing new components/members complete all as shown on drawing and directed:-

Front leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.

Rear leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.

Arm Made out of 1st class hardwood (Teak) of size 70mm x 35mm and length as shown on drawing.

Batten made out of 1st class hardwood (Teak) of size 20mm x 50mm & length as shown on drawing.

Back frame made out of 1st class hardwood (Teak) of size 70mm x 35mm & length as shown on drawing.

M&L for replacement of unserviceable seat/ back cushion with new 100mm thick with 40 density of size 560mm x 530mm x 100mm thick (Make - Sleepwell/Curlon) Zonal specification for sofa set all as specified and directed

Removing carefully existing cover of seat/back cushion of size 560mm x 530mm x 100mm thick complete and material & labour for new cover of white long cloth not less than Rs 80/-per mtr and tapestry cloth of rate not less than Rs. 250/- per metre complete all as specified and directed.

PVC Ring/ Rubber shoe as per Drg.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing broken/unserviceable components/members of Table 900 x 600 x 760mm with/without drawer and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Side rail as per existing size made out of 1st class hardwood (Teak)

Leg of size 60 x 60mm at top and 40 x 40mm at bottom x 740 mm long made out of 1st class hardwood (Teak).

Stiffener of size 40 x 25 x 760mm made out of 1st class hardwood (Teak).

Stiffener of size 40 x 25 x 460mm made out of 1st class hardwood (Teak).

Top of size 900mm x 600mm made out of 18mm thick prelaminated MDF board as per IS one side decorative of approved shade including 4mm thick teakwood edging alround.

Drawer of size 300mm x 460mm x 110mm with knob of Mild steel chromium plated of size 40mm.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing broken/unserviceable omponents/ members of Table Dinning 4 person 1200mm x 900mm and supply and fixing new omponents/members duly finished complete all as shown on drawing and directed:-

Top of size 1200mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.

Leg of size 75mm dia at top and 40mm dia at bottom x 740 mm long made out of 1st class hardwood (Teak).

Side rail of size 50 x 25 x 460mm made out of 1st class hardwood (Teak)

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

M & L for removing carefully following existing broken/unserviceable components/members of Table Dinning 6/8 persons 1500 x 900 x 760mm and 1800 x 900 x 760mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Side rail as per existing size made out of 1st class hardwood (Teak)

Front /Rear rail as per existing size made out of 1st class hardwood (Teak)

Leg of size 75mm x 40mm x 740mm long made out of 1st class hardwood (Teak).

Top of size 1500mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.

Top of size 1800mm x 900mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround.

PVC Shoes /Buffers.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Mirror Dressing (Gents) MAP and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed :-

Mirror Should be 1150mm x 550mm with 5.5 mm thickness backed by 12mm thick phenol bonded ply with 50 mm x 28mm teak wood frame on all sides

Sides, bottom and top shall be 18mm thick prelaminated particle board with teak wood edging.

Shelves will be 8 mm thick glass with edges polished

Back of mirror made of plywood 12mm thick of size 1200mm x600mm.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table Dressing Ladies MAP incl Stool and supply and fixing new components/members duly finished complete all as shown on drawing and directed :-

Mirror Should be 1200mm x 600mm with 5.5 mm thickness backed by 12mm thick phenol bonded ply with 50 mm x 28mm teak wood frame on all sides

Top shall be 1200 mm x 600 x 18 mm thick prelaminated MDF Board

Shutters shall be 400mm x 350mm x 18mm thick Prelaminated MDF Board

Drawers shall be 100mm x 350mm x 350 mm of 18 mm thick Prelaminated MDF Board with bottom 12 ply duly fitted with 10 " channels

Back shall be 1150mmx550 mm 12mm thick BWR Ply board

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Peg Table (450x300x380mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Leg Made out of 1st class hardwood (Teak) of size 45mm x 45mm at top cut to shape and 25mm x 25mm at bottom, 362mm height.

Front top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 300mm

Side top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 200mm

Top of size 450mm x 300mm made out of 18mm thick decorative MDF board as per IS one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.

PVC Shoes /Buffers as per sample.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Side of size 435mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)

Shelf of size 380mm x 300mm made out of 18mm thick decorative MDF boarde of approved shade (exterior grade)

Bottom of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)

Back of size 380mm x 435mm made out of 6mm thick plywood one side decorative face and other side commercial face.

Top of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side (MAP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Top of size 450mm x 450mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.

Left/Right Side of size 450mm x 432mm made out of 18mm thick decorative MDF board as per IS of approved shade (exterior grade)

Bottom of size 450mm x 450mm made out of 18mm thick decorative MDF board as per IS of approved shade (exterior grade)

Back of size 500mm x 450mm made out of 6mm thick plywood and upper side/back decorative MDF board and 414mm x 90 mm, 18mm thick decorative MDF board of approved shade (exterior grade)

Drawer of size 414mm x 100mm made out of 18mm thick decorative MDF boardwith 6mm thick ply wood bottom with handle as per approved by Engr-in-charge.

PVC Shoes as per sample.

Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table writing (1145 x 600 x 760mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-

Leg Made out of 1st class hardwood (Teak) of size 55mm x 35mm of height as shown on drawing.

Front top rail made out of 1st class hardwood (Teak) of size 50mm x 25mm length as shown on drawing.

Top of size 1145mm x 600mm made out of 18mm thick decorative MDF board as per IS of approved shade (exterior grade) including 4mm thick teakwood edging alround.

Back made out of 6mm thick plywood commercial face both sides of size as shown on drawing.

PVC Shoes/buffers/knob.

Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.

B.S Constructions

TARKESHWAR DASS CONSTRUCTION COMPANY

BHARAT BUILDERS