Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC WATHORA CHADOORA DISTT BUDGAM KASHMIR 191113 J K | CHADOORA | BUDGAM | JAMMU AND KASHMIR | 191113 | L1 | Accepted-AOC LOWEST L1 | |
| 2 | L2₹31.0 L+₹2.3 L (8.14%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹32.5 L+₹3.8 L (13.3%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹34.1 L+₹5.4 L (18.7%)Rejected-Finance RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹34.3 L+₹5.6 L (19.3%)Rejected-Finance OLD AIRPORT ROAD W ANBAL SRINAGAR J K 190005 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹37.5 L
EMD Value
₹75,000
Closing Date
16 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
SPL REPAIR TO BLDG NO P-15 AT OLD AIR FIELD UNDER GE 970 EWS
2022_MES_569716_1
GE 970 EWS-60/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹75,000
Yes
7 Mar 2023
17 Dec 2022
18 Jan 2023
17 Dec 2022
16 Jan 2023
2 Jan 2023
Amount
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 sqm n.exc 4 sqm each complete all as specified and directed.
Dismantling wrought iron or mild steel work (used in framework for staging of water tank) of any description not otherwise provided for complete all as specified and directed.
Dismantiling timber scantling 40 sqcm and over insection in any position for framed work complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccifically provided for complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floor aproans laid, bedded and pointed in any mortar complete all as specified and directed.
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Material & labour 75 mm thick PCC 1:3:6, type C-2, using 40 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified and directed.
Material & labour for 75mm thick PCC type D-2 (1:4:8) (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
Material & labour for 25mm thick PCC (1:2:4) Type-B-1 (using 20mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
All as per item No. 19 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
Material & labour Machine cut Kota stone slab flooring 16-18mm thick as in floor to match the shade of the slab incl rubbing and polishing laid over & including 20 mm thick screed be in CM 1:6 including roughening of Old concrete surface by picking sweeping, clean & washing down with water to remove dust and brushing with neat cement slurry with 3.0 kg / Sqm etc complete all as specified and as directed.
Material & labour Machine cut Kota stone slab flooring 16-18mm thick as in riser of steps, skirting, dado and pillar incl rubbing and polishing laid over & including 10 mm thick screed be in CM 1:3 including roughening of Old concrete surface by picking sweeping, clean & washing down with water to remove dust and brushing with neat cement slurry with 3.0 kg / Sqm etc complete all as specified and as directed.
Glazed ceramic tiles coloured, pattern as required (dark & light shade combination) 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with and including 10mm thick backing coat in CM 1:3 after dismantling floor hearth or wall and rubbish off the premises complete all as specified and directed
Material & labour for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
Material & labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Material & labour Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and directed.
Material & labour Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing complete all as specified and directed.
Material & labour Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary s&f lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.
All as per item No 28 above but size of frame 165 x 60mm ---ditto---
Material & labour PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate as in back filling, coping, benching on corner of joints etc complete all as specified and directed.
Material & labour 2nd class hard wood 35 mm thick factory made glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.
S&F factory made 35mm made shutters plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed.
Material & labour for box type Steel window (Factory made) outer frame made out ERW tube 'P' section 65mmx45mmx25mm and shutters of ERW tube 'P' section 50mmx35mmx20mm openable (double) shutter with glazed openable shutter on (External side) and wire gauzed openable shutters on (Internal side) with steel pintal hinges, steel handle 100mm long, mild steel tower bolt 02 Nos on each shutter , stopper of 'Z' section and its locking arrangement at mild steel hook and eye including 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm dia and 4 mm thick sheet glass window and 4 mm figured glass for ventiliators complete all as specified and directed. Note : Following items will also include in this unit rate:- (i) One shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contact with bricks/concrete surface. (ii) 04 Nos MS steel Lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs. (iv) 0.36 mm dia SS wire mesh (v) 4mm thick sheed glass - for window (vi) 4 mm thick figured glass -for vent
Material & labour 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc complete all as specified and directed.
Material & labour for 2nd class hardwood (wrought) in scantling for timber frame and fixed complete all as specified and directed.
Refixing of timber scantling obtained from dismantling complete all as specified and directed
Supply and fixing in repair 18/19 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination and other side balancing white lamination incl teack wood liping 6mm thick on sides complete all as specified and directed.
Material & labour floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 140mm complete all as specified and directed.
Material & labour mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.
Material & labour MS butt hinges medium weight of size 100 mm fixed with screws complete all as specified and directed.
Material & labour 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
Material & labour 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
Material & labour aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.
Material & labour hasp and staple safety type 100 mm size, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed
S&F in repair Harrison rail (Curtain rod//drapery rod), 20mm dia, powder coated with and including fancy type PVC bracket 2 Nos of each opening and side stopper powder coated of required shape and size 2 Nos of each opening complete all as specified and directed
Material & labour preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primervcomplete all as specified and directed
Material & labour Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
Material & labour mild steel work Fe 410-W as in joist, channel, angle or tee sections fixed independently without connecting plates etc complete all as specified and directed.
Material & labour PCC (1:2:4) B-2 (40 mm graded) in foundation, filling and mass concrete for fixing of angle iron work including necessary form work and allied work complete all as specified and directed.
Preparation of new steel surfaces of any description over 10cm in width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material & labour RCC type B1, 1:2:4 (20mm graded aggregate) as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of reinforcement cement at description & any position etc complete all as specified and directed.
Material & labour TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material & labour for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole and drain cover slab and similar article with plain faces, set in cement 1:4 complete all as specified and directed.
Material & labour cement concrete 1:5:10 with brick course aggregate as in filling in sunken floors complete all as specified and directed.
Material & labour for preparing surface of sunken slab and applying 15mm thick cement plaster 1:3 cement sand mortar with integral water proofing compound both on floor & wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder concrete upto top level to receive top flooring complete all as specified and directed.
GI tubing as in spout pipe light grade 32mm bore including of required shape complete all as specified and directed.
Material & labour brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Material & labour brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.
Material & labour rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material & labour rendring 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material & labour rendering 10mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
Preparation of old plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.
Material & labour for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed.
Material & labour preparing new plastered surface of walls and applying two coats of cement based paint over a coat of primer etc complete all as specified and directed.
Material & labour preparing old plastered surface of walls and applying one coats of cement based paint complete all as specified and as directed.
Material & labour for prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed
Material & labour for preparation of old surface of ceiling and applying one coats of white wash complete all as specified and as directed.
Material & labour preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Anodised aluminiun snap grid frame work for false ceiling of size 605mm x 605mm with and including 6 mm thick non asbestos fibre cement building board and G.I hanger 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long, complete all as specified and directed.
Material & labour pre- painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Material & labour pre- painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F in repair 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition, wall and lineing complete all as specified and directed.
S&F 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
Material & labour in repair 1.25mm thick plain, black mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and directed.
Material & labour for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Material & labour 15mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Material & labour 20 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Re-fixing of old 15mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Re-fixing of old 20mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F for 2nd class hard wood plain fillets, sectional area exceeding 13 sqcm but not exceeding 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails all as specified and as directed.
Material & labour for lagging to 20mm GI pipes used in internal water supply or plumbing all round with, 40mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 , provided with chicken mesh wire netting 25 gauge, 20mm mesh and with with 0.01mm aluminium foil complete all as specified and directed.
Material & labour in repair vitrous china wash hand basin, oval shape counter top of size 550 x 400 mm white fixed to RCC counter with and 32mm dia PTMT waste coupling and 32mm dia PVC waste pipe 90cm long etc inlet and outlet connection complete all as specified and directed.
Material & labour in repair vitreous china, squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete all as specified and directed.
Material & labour in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with and including 40mm dia PVC waste pipe 90cm long etc inlet and outlet connection complete all as specified and directed.
S&F in repair brass CP wall mixer Telephonic with crutch (provision for hand shower) complete all as specified and directed.
S&F in repair brass CP central hole basin mixer without pop up waste system (9” spout) complete all as specified and directed.
S&F in repair brass CP sink mixer with regular spout W/M complete all as specified and directed.
S&F in repair 15 mm bib tap fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down old one complete all as specified and directed.
S&F in repair brass chromium plated shower rose of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in repair CP angle valves (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed.
Supply & fix in repair 20mm stop valve (Minium weight of angle stop valve 110 gms) standard of PTMT any colour high pressure screwed for iron pipeand fixed complete all as specified and directed.
S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end including taking out old one complete all as specified and directed.
S&F in repair PTMT towel rail 20mm dia 60 cm long between flanges complete all as specified and directed.
S&F in repairs glass corner shelves one tier fancy type complete all as specified and directed.
S&F in repairs plate rack stainless steel of size 600 mm x900 mm fixed with washer and plugs complete all as specified and directed.
S&F in repair 110mm PVC, SWR pipes, single socketed in any length with rubber rign joint fixed with wall complete all as specified and directed
All as per item no 98 above but 75mm bore pipe ---ditto---
S&F in repair PVC bends (any radius) with access door of 110mm dia complete all as specified and directed.
S&F in repair PVC bends (any radius) with access door of 75mm dia complete all as specified and directed.
S&F in repair PVC cowls of 110mm dia complete all as specified and directed.
S&F in repair 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
S&F in repair 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
S&F in repair PVC (SWR) floor trap 75mm dia, palin with grating including joining to waste pipe with solvent etc complete all as specified and directed.
S&F in repair rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.
Material & labour 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm dia (min weight- 455 gms) complete all as specified and directed.
Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.
Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including PVC casing and caping (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable (FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 109 here-in-before but switch socket out let 3 pin, 5 Amp on independent board.
All as per description of srl item No 109 here-in-before but switch socket out let 3 pin, 5 Amp on same board
All as per description of srl item No 109 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket combination, 15 Amps on independent board.
Switch piano flush button single pole one way 5 A, 240 V complete all as specified and directed.
Switch socket combination 2 in 1, 5 Amp flush type, 240 V, complete all as specified and directed.
Switch socket combination 5/15A, 5 in 1, 3 pin, 240 volts complete all as specified and directed.
Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 240 volts complete all specified and as directed.
Fan regulator, electronic type, five steps socket type single phase, including connection complete all as specified and directed.
Switch bell push flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed
Call bell, multi music type AC single phase, 230 volts including wooden/ PVC board of suitable size, connecting & testing complete all as specified and directed.
Taking down unserviceable any type of main switch, DB's including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
MCB DB SPN 8 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
MCB TPN 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
MCB SPN 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
LED lamp 1 x 9 watts suitable for pin type batten/pandent holder complete all as specified and directed.
Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply and fixing in repair energy efficient surface Mounted LED Luminire 18/20 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed. Make : - Bajaj Cat No BCLSB 18 WH /NW or equivalent in Philips/CG) complete all as specified and directed.
Supply and fixing in repair 1 x 45 watts LED street light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights all as specified. (Make : Bajaj Cat No BRTFG 45W LED I or equivalent in Philips/CG) complete all as specified and directed.
Material & labour in repairs for Earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.5 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia medium grade protection pipe and salt etc and connected to earthing test point incl necessary earth work complete all as specified and directed.
Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 6 sqmm and one run of 4 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
M/S B S CONSTRUCTIONS
M/S BASHIR AND SONS
FIRDOUS AHMAD BABA
M/s Bashir Enterprises
M/S GHULAM HASSAN KUCHAY
M/S maqsood enterprises
M/S Sultan Enterprises
M/S Manzoor and Co
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .