Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2 L
EMD Value
₹2,000
Closing Date
15 Jun 2020, 12:00 pmClosed
SE
Pallavpuram
Runngic contract for Maintanance and Repairing work of line and pole
2020_PVVNL_478763_1
49/EDC2/MT/2020-21
Open Tender
Electrical Works
Item Rate
180 days
Meerut
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
SE EDC-2
₹2,000
6 Jul 2020
2 Jun 2020
15 Jun 2020
2 Jun 2020
15 Jun 2020
2 Jun 2020
Amount
Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :–
A) PCC Pole 8.5 mtr long/ST pole 11 mtr. long.
B) Line materials such as 33 KV/11 KV Cross arms 33 kv/11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire Acsr weasel/rabbit/dog conductor, GI wire, etc.
Cartage of following material from JE Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :– A) PCC Pole 8.5 mtr long/ST pole 11 mtr. long.
B) Line materials such as 33 KV/11 KV Cross arms 33 kv/11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire Acsr weasel/rabbit/dog conductor, GI wire, etc.
Opening the bindings and removal the conductor including all 11 KV/LT line samagri of damaged broken pole.
Removal of damaged broken PCC/ST pole of 11 KV/LT line by digging the pit for required size and depth.
Erection of PCC/ST pole from where damaged pole has been removed after digging a pit for required size and depth 1.6 mtr. In all type of Soil including back filling of the pole with proper ramming after completion of work.
Fabrication and fixing of all 11 KV/33 KV line accessories.
Dismanteling of damage section pole including removal of accessries.
Dismanteling of damage double pole including removal of accessries & T/f.
Erection of section pole of PCC/ST pole from where damaged pole has been removed after digging a pit for required size and depth 1.6 mtr. In all type of Soil including back filling of the pole with proper ramming after completion of work.
Fabrication and fixing of all 11/33 KV line accessories.
Erection of Double pole of PCC pole from where damaged double pole has been removed after digging a pit for required size and depth 1.6 mtr. In all type of Soil including back filling of the pole with proper ramming after completion of work.
Fabrication and fixing of all 11 KV line accessories of double pole.
Mounting of 25 to 100 KVA T/f on double pole including making the jumpers of HT side and fixing the cable of LT side
Erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.
Laying lifting stringing of proper sagging of ACSR weasel conductor after jointing the new conductor/ repairing the existing conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.
Laying lifting stringing of proper sagging of ACSR weasel conductor after jointing the new conductor/ repairing the existing conductor of LT line including binding & jumpering properly.
Replacement of damaged 11 KV MS Cross Arm with new cross arm by opening the bindings and Nut bolts of clamps then rebinding the same after completion of work.
Replacement of damaged and cracked 11 KV disc insulator by opening the jumper and rejumpering the same after completion of work.
Replacement of damaged 11 KV pin insulator by opening the binding and rebinding the same after completion of work.
Straightening of tilted PCC pole after opening the binding and digging the pit for required depth and refilling the same and rebinding after completion of work
Resagging of loos sag of 11 KV & LT line after opening the binding and stringing the conductor then rebinding jumpering the same after completion of work
Providing & fixing bamboo strips in 3 phase 4 wire & 2 phase 3 wire in LT line with proper binding
Cutting & chopping tree branches near & over side of line for making the clearance between line and tree.
Straightening of bended cross arm of 11 KV line after opening the Nut bolts and binding from insulator
Providing and fixing Holding Clamps.
Providing and fixing F Clamps.
Providing and fixing LT Clamps.
Providing and fixing LT insulator
Providing and fixing Stay Clamps
Providing and fixing Stay insulator
Providing and fixing Bolt and Nuts.
M/s Faisal Electricals
M/s Kumar Enterprises
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .