Additional work of Polyclinic Veterinary Hospital Building Sirohi Distt. Sirohi (Raj.)

Amount

(A) ELECTRIC WORK Providing & Fixing of 86" LED interactive touch Screen Display Having 4K Resolution with 178 degree viewing Angle with wifi Bluetooth, HDMI, USB Connectivity Make : ATVI, Viewsonic/ Samsung

Providing & Fixing of conference system at meeting hall on existing tables with delegate units, Chairman unit, control unit, mixer amplifier of same OEM with connectivitiy cables of 2.5 mtr. for delegate unit, RJ 45/multicone connector etc. complete in all respect with making connections of speakers as per specifications below of makes : Ahuja.

The chairman unit must have build in loud speaker of max. input 300mW, 16 ohm impedence & high quality sensitive condenser microphone (-63dBV per microbar & 7.5mV/Pa) mounted on 16" flexible gooseneck with a ring LED indicator The unit should have priority switch, talk Switch speaker volume control head phone vol. control with micro phone auto switch off facility & 2.5m inter connecting cable etc. complete in all respect.

The deligate unit must have build in loud speaker of max. Input 300mW, 16ohm impedence & high quality sensitive condenser microphone (-63dBV per microbar & 7.5mV/Pa) mounted on 16" flexible gooseneck with a ring LED indicator.The unit should have a talk switch, speaker volume control, head phone vol. control with micro phone auto switch off facility & 2.5m inter connecting cable etc. complete in all respect.

Control unit for Conference System

Supply, Installation and testing 6W wall mount speaker with excellent music Reproduction max power : 9W, Rated power : 6 watt, power tapping 6/3/1.5 w effective freqency range (-10db) : 200Hz to 15 KHZ. SPL at rated power (1MHZ at lM) 96db Opening Angle1 KHZ/4KHZ (-6db) : 150/70 Make : Bosch/Biamp/Bose

Supply, Installation and testing of 120 W power amplifier in a2U high housing with 70V/100V and 8 ohm outputs, Dual input with priority switching, 100 V input for Slave operation on 100 V speaker line, mains, battery back-up with following feature : 1) output power (rms/maximum)120/ 274W. 2) Frequency response 60HZ to 18 KHZ (+1/-3db) at -10db ref rated output) 3) Distortion <1% at rated output power, 1KHZ 4) S/N (Hat at Max volume) >65 db 5) Main Voltage 230VAC+10%, 50/60Hz 6) DC Voltage 24V DC+15%/-15% Make : Bosch/Biamp/Base

The unit must incorporate a receiver unit & a cordless hand held microphone. The microphone should be dymanic, super cardioid type with RF output power of 15mW (max.) 100dB dynamic range with internal dipole antenna. The micro phone must have on/off switch with red LED & having AA type (UM-3) alkaline cells with life of 15-20 hrs. The unit must have coverage area more than 200 Feet.The receiver must have dual squelch & operate at quartz crystel locked VHF high band frequency & with frequency response range 50-15K.Hz. The unit must have telescopic antenna & audio output 0-55mV/1K.ohm power on/off switch, audio output vol. control squelch level contral and having red LED for power on, yello LED for RF reception & green LED for audio signals the etc. S/N ratio should not be less than 100dB etc. as reqd.

Supply installation & testing of Podium microphone Make : Bosch/ Sennheiser/ Shure

Supply installation & testing of HDMI Cable

Supply installation & testing of Popup Box Make : BSS/Suvira/techut

Supply installation & testing of Cables & connectors

Supply installation of Wooden podium

Laptop computer intel i3 processor, 8GB RAM, 512 SSD, window 11 Screen size 15.6 inch Make : HP/Dell

Providing & Fixing Desktop of Computer System intel i3 processor RAM 8GB, HDD 1TB, 19" LED, Key board & Mouse

500VA UPS ,make: BPL/Luminous /Hitachi

(B) FURNITURE WORK Supply of Conference table size 18’length x 6’depth x 2.5’height. Made in pre laminated board. Table shall be made in 5 parts and will be fitted at site. Table 1,2,3,4 – All table size – 2400mm length x 600mm breath and 750mm height. Complete Top should be 34mm thick (Not only border) pre laminated board with border of 2mm thick PVC edge beading, modesty panels should of 525 width, exposed side to be edge banded with 0.8mm and Gable height from top should be 600mm Supports in between of table should be there so that it remains rigid. Table 5 – table size 1800mm length x 600mm width Complete Top should be 34mm thick (Not only border) pre laminated board with border of 2mm thick PVC edge beading. Edges of the table from both side should be round so that 3 persons can be seated properly. Supports in between of table should be there so that it remains rigid. All exposed side to be edge banded with 0.8mm. (Design and other specification as per direction of engineer in charge)

Supply of Executive Revolving Chair Heavy Duty steel finish base of 650mm with 60mm 5 wheels attached, class 3 gas lift, torsion bar plate mechanism, Single L ply 15mm attached with 40 density foaming in seat and back 100mm cushion in seat and 100mm cushion in back to be double cushioned. Upholstery material of leatherette. Handle should be attached in seat and back with cushion on it. Size of seat should be 500mm width and 475mm depth. Back size 750mm height and 500 width. (Design and other specification as per direction of engineer in charge)

Supply of Executive Table with Side unit Table size – 1800mm table top Length, 900mm table top breath, 750mm table height. 25mm thickness table top made in post forming both end of table plain side to be 2mm edge banded. All Modesty panel are of 750mm in width made in 18mm pre laminated board with 0.8mm edgbanded. Gable panel should be of 675mm Height from the top. Bottom of the table having footrest and on right side of the table having 3 equal drawers. All Drawer fitted on 400mm Telescopic Channel, having computer key locking systemon First drawer and rest without lock having steel handles. Side table of 900mm length x 450mm breath x 750mm height. Table top made of 25mm thickness table top made in post forming both end of table plain side to be 2mm edge banded having single drawer, keyboard, CPU and UPS stand at bottom. All exposed parts to be edge banded with 0.8mm. (Design and other specification as per direction of engineer in charge)

Supply of Student Chair with writing pad Frame & Legs : The frame shall be made out of Diameter 25mm tube of 1.6mm thick, welded by Co2 welding process for uniform surface finish and higher tensiie strengh The perforation on the sheet be uniform of 2.5mm dimension. Back & Seat : MS Perforated sheet of 1.2mm thock with powder coating (DFT 40-50 Microns). Writing desk : Made out of 12mm thick MDF board on foldable basis. The Desk size shall be broader (290mmx450mm from The front & tapering (290mmx100mm) towards the elow. The MS powder coated hindge shall be of size 100mm W. Including all taxes & FOR.. (Design and other specification as per direction of engineer in charge)

Supply of 3 SEATER COMMOM ARMS The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.15±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment . Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5 cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm. Including all taxes & FOR.. (Design and other specification as per direction of engineer in charge)

Supply of Computer Table with CPU Hanger size shall be 1200 width mm x 600 Depth mm x 728 Heigth mm. Top shall be 18mm thick Pre laminated particle board all work surface edges duly sealed with 2mm thick PVC edgebanding. The Rectagularngular frame shall be fabricated component in 1.2mm thick CRCA, Finish : powder Coat (epoxy polyster) coated to the thickness of 50 micron 1.2mm thick MS ERW A Tube, finish powder coat (epoxy polyster), Wire management horizontal wire carrier 0.7mm thick CRCA Finish power coat (epoxy polyster) and vertical wire carrier 0.8mm thick CRCA Finish powder coat (epoxy polyster) coated to the thickness of 50 micron (+-10). Including all taxes & FOR.. (Design and other specification as per direction of engineer in charge)

Supply of Visitor Chair with arms in fix seating with full cushion on seat and back. Seat size 450mm width x 450mm depth. Backrest size 450mm width x 525mm height. Chair structure made in 16 gauge 1” round pipe with ¾” pipe duly inserted in 1” pipe for better durability. 2 Ms flats welding on iron frame of size 25mm width and 6mm thickness for seat. Backrest support structure having LMS flat of 50mm width and 10mm Thickness. Seat and back ply should be 12mm hot press. 75mm thickness 40 density foam in seat, 70mm thickness 40 density foam in backrest covered with matte fabric. Arms on the chair should of Ms covered with PU connected with bolts from bottom. Exposed parts of the iron structure to be powder coated with 50 micron. Including all taxes & FOR.. (Design and other specification as per direction of engineer in charge)

Supply & Fixing open iron rack size 1875mm (H) x 900mm (W) x 300mm (D) having 6 Nos. Shelves 1mm thick M.S. sheet powder coated & Angle post having rolled steel powder coated Angle size 40x40x3 with Pigon hole as required. Including all taxes & FOR.. (Design and other specification as per direction of engineer in charge)

Supply of 12mm thick plan Glass having size 2400mmx1200mm & 1200mmx450mm. Including all taxes & FOR.. (Design and other specification as per direction of engineer in charge)

GOUTAM CONSTRUCTION CO.

GOUTAM CONSTRUCTION CO.