ADDN/ALTN TO F-1 AND F-2 QTRS AT DRDO TOWNSHIP KANCHANBAGH, PROVN OF APPROACH ROAD FROM MAIN ROAD TO NCN MAIN GATE AT CNA(DP) AND PROVISION OF 02 x 1.5 TR CAPACITY SPLIT AIR CONDITIONER FOR INTEGRATED TEST FACILITY (ITF) AT CNA (DP) HYDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed.

Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for 100mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate complete all as specified and as directed.

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed.

M & L for brick work with fly ash bricks subclass 'B' bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M & L for brick work with fly ash bricks subclass 'B' bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:4complete all as specified and as directed.

M & L for taking down cement / lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for Rendering 15mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even and smooth with out using extra cement complete all as specified and directed.

M & L for Rendering 15mm thick in cement plaster 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for Rendering 5mm thick in cement plaster 1:3 on ceilings surfaces finshed even and smooth with out using extra cement complete all as specified and as directed.

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified ceramic tiles Light Shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and as directed.

M & L for Non-Skid coloured printed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles not exceeding 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and as directed.

S & F for Glazed ceremic coloured printed tiles of size 600 mm x 450 mm x 7 thk or 450x 300mm x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M & L for 20 mm thick Black Granite stone work (table rubbed and polished) over 15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, with 2mm decorative laminates on both sides of the shutters complete including applying french polish on the doors complete all as specified and directed.

S&F gauged and skelton shutters 30mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) complete all as specified and directed.

S & F 25mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F in repairs 18/19mm thick prelaminated particle board interior grade prelaminated both sides with decorative veneers of choice coulour fixed with screws for frame work all as specifed and directed.

S&F in repairs 12mm thick prelaminated particle board interior grade prelaminated both sides with decorative veneers of choice coulour fixed with screws for frame work all as specifed and directed.

S&F UPVC windows all as specified in manufacturers guide lines including sliding shutters ie glazed and guaged shutters including 5mm glass and stain less steel wire mesh for gauage shutters and all necessary fittings and fixtures and necessary arrangements for AC openings as reuquired at site all designs are as directed.

S&F UPVC ventilators all as specified in manufacturers guide lines including top hung shutters i.e. glazed and gauged shutters including 5mm thick glass and stainless steel wire mesh for gauge shutters and all necessary fittings and fixtures required at site all designs are as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars complete all as specified and as directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F butt hinges 100mm size, type C-22, extruded brass with mild steel hinge pin, anodised complete all as specified and as directed.

S & F butt hinges 75mm size, type C-11, extruded brass with mild steel hinge pin, anodised complete all as specified and as directed.

S & F 200mm brass barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 300mm long of brass designer sliding door bolt with hasp, staple (bolt type) with sand or die cast and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or brass door shutter complete all as specified and as directed.

S&F in repairs 100mm length brass handles cast type , bright polished all as specified an directed.

S&F in repairs 75mm length brass handles cast type , bright polished all as specified an directed.

S&F continous (Piano) hinges of brass bright finish 30mm flap width all as specified and directed.

S&F in repairs Mortice lock 4 lever with handle complete set Make : Godrej cart part No 172

S&F cupboard locks grade 1 4 LEVER of size 50mm all as specifed and directed.

S&F floor door stopper of brass deisgner polished long tongue, length of toungue min 140mm complete all as specified and as directed.

S&F cast iron body door closer, hydraulically regulated, ISI marked, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 60 to 80 kg complete all as specified and as directed.

S&F wardrobe hooks (single) 50mm to 60mm, aluminium, complete all as specified and as directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.

M&L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and as directed.

S&F 70mm thick factory made SFRC drain cover, medium duty of any size as required complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors including taking down old pipe complete all as specified and directed.

All as per item No.47 bove but 20mm bore

All as per item No.47 above but 25mm bore

S&F in repairs gate valves gun metal with iron wheel head screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs vitreous china squating (Orissa pattern) water closet of size 580x440mm white, with integral foot rests (excludng flushing cistern and flush [pipe) complete incl. trap and connection to trap and flush pipe antisyphonage pipe etc., Including provn of lime concrete bedding and making good to floor all as specified.

S&F in repairs viterious china wash down water closet pan (padestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) incl P or S trap etc all as specified.

S&F in repairs PVC valveless, syphonic action type flushing cistern 10 ltrs capacity low level white, with inlet ball valve float and handle alongwith suitable for flush pipe/bend etc incl brackets complete all as specified and as directed.

S&F in repairs CP brass shower rose with swivel joint 80 mm size suitable for 15mm bore pipe complete all as specified.

S&F in repairs 15mm brass concealed stop cock fancy type ISI marked cost copper alloy, screw down high preasure with crutch or butterfly handle screwed both ends suitable for iron pipes of 15mm bore complete all as specified.

S&F in repairs Vitreous china wash hand basin,table top make Hindaware Model Vasca cat No 91066 or techno commerical equivalent white, including all necessary fittings all as specified and directed.

Supply and fix in repair bathroom cabinet mirror of size 495x395x95mm complete all as directed and specified.

S&F in repairs brass chromium plated waste coupling 32mm bore WHB complete all as specified.

S&F in repairs 32mm bore and 60cm long PVC waste pipe for WHB complete all as specified.

S&F in repairs 15mm dia wash basin CP brass mixer as in repair complete all as specified and directed. Make:-JAQUAR/HINDWARE/PRAYAG

S&F in repairs 15mm dia wall mixer brass chromium plated fixed to existing pipe/connections including telephonic hand shower and all necessary fittings all as specified and directed. Make:-JAQUAR/HINDWARE/PRAYAG

S&F in repairs 15mm dia PVC Connection 450 mm long with 2 nos brass check nuts suitable for 15 mm bore of pipe with washers complete all as specified.

S&F in repairs 15 mm bore bib taps ISI marked chromium plated and fancy type with crutch or butter fly handle high pressure screwed down for iron pipes complete all as specified. Make:- LEADER/ ZENITH/ SEIKO/ HINDWARE/ PRAYAG

S&F chromium plated health faucet for WC with 1.00 mtr long pvc pipe incl necessary GI fittings as required like toe, nipple etc all as specified and directed. Make:- LEADER/ ZENITH/ SEIKO/ HINDWARE/ PRAYAG

S&F in repairs 600 x750 mm fancy type looking mirror designed as required at site as directed by Engr In Charge including all necessary fittings

S&F in repairs of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as directed.

M&L in repairs soap dish chromium plated brass fixed with brass nuts complete all as specified and as directed..

S&F in repairs toilet paper holder brass chromium plated complete all as specified and as directed.

S&F in repairs CP Towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F CI sand cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors/fixed to wall or 100mm dia in repairs complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes & pipes includings bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilegver brackets and connection uinon to pipe, overall size 495mm x 420mm bowl sixe 410mm x330mm x 160mm complete all as specified and directed.

S&F in repairs 20mm bore ball valve of PVC with rod and polythene float complete all as specified.

S&F in repairs to rotational moulded 3 layered vertical water storage tanks with closed tops (cylinderical) hoisted and fixed in position 1000 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as directed.

S&F in repairs 20 to 25mm external dia drapery rods stain less steel with including designer lattos and brackets all as specified and approved by Engr In charge including taking out old pelmet with curtain rods all as directed.

Taking down existing roof treatment of any description, any position with bituminous felt including plaster/loose concrete and removing rubbish to a distance exceeding 500m but not exceeding 1000m and roughening the surfaces of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc complete specified and directed by Engineer-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust etc.

M&L for rendering 10mm thick in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @3% by weight of cement shall be carried out complete all as specifed and directed. Note : WPC will be measured under separate item of this schedule.

Brushing with neat cement slurry @ 3.0 Kg of cement per Sqm

M& L water proofing treatment with polymeric standard membrane of weight not less than 3.50kg per sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) laid over primed surface aby forced application complete shall be fused uniformly by LPG torch flame on horizontal/vertical/slope surface on roof complete all as specified and directed. Make : IWL/STP/Tikitar Course roof treatment consist of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 Ltr per sqm (ii) Laying of APP based membrane as specified thickness and weight (iii) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm (iv) Applying two coat of aluminium paint @ 100 ml/sqm

M & L for 100mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specifed and directed.

S & F grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specifed and directed.

S&F 110mm dia PVC SWR pipes of pressure 6kgf/cm2 fixed complete to walls ceilings, in floors etc including all necessary fitting arrangements and bends couplings etc all as specified and directed by Engr-In-Charge

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of plastic emulsion paint as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- ASIAN PAINT/ (BERGER PAINTS)/ DULUX

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L for complete removal of existing treatment from external surfaces of walls/ ceiling, washing with water and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L PVC Celuka ply, 18mm thick, for use in kitchen cabinet, cabinet shutters and front of drawers, duly fixed with with solvent adhesive, shaped to receive glass / steel baskets, fixed in position with and including provision of all necessary fixing arrangemens i.e., anchoring to walls with anchoring bolts of suitable length /screws as applicable, complete all as specified and directed. MAKE (for PVC sheets):- Sintex / Rajshree

S&F Stainless steel modular type baskets, using stainless steel of grade 304, of any shape and size as directed with side sliding roller clip, one on each side, fixed with steel screws, complete all as specified and directed. MAKE:- Godrej / Heittech.

S&F Telescopic chanels to be fixed to stainless steel baskets, size not less than 350mm when it is closed, complete all as specified and directed. MAKE:- Godrej / Heittech

S&F Hinges for kitchen cabinet shutters having modular fittings, complete all as specified and directed MAKE:- Godrej / Heittech

S&F Stainless steel handles conforming to sample available in the sample room of AGE B/R - II of GE(I) R&D Kanchanbagh Hyderabad, total length of handle shall be less than 100mm for modular kitchen, complete all as specifed and directed.

Preparation of new PVC surfaces and applying two coat of Deco paint of colour as directed / texture paint as directed, over a coat primer and applying putty to make smooth sufaces wherever required, complete all as specified and directed.

Surface excavation n.exc 30cm deep and average 15cm deep and getting out in, hard soil complete all as specified and directed.

Excavation over area not exceeding 1.5m deep and getting out in hard/dense soil compelete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 500mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed.

M&L 100mm moorum/ red bajiri filling in floors or pavings, laid in layers n.exc 15cm thick spread. Levelled and rammed including watering complete all as specified and directed.

Rolling and consolidation of formation surfaces in cutting with power roller exceeding 8 ton & not exceeding 12 ton rolling to required level and gradient and camber etc including watering when required complete all as specified and directed.

M&L for soling for sub base 150mm thick spread thickness hard core of broken boulders or quarried stone intersticles filled surface formed and rolled and consolidated to require gradient and camber and rolling with 8 to 10 ton power roller complete all as specified and directed.

M&L for 150mm thick (compacted thinkness) WBM with stone aggregate (type of aggregate) lime stone sand flint or quantize of grading 1 (90 to 40mm size) spread rolled and consolidated to require gradient and camber with 8 to 10 ton power roller complete all as specified and directed.

M&L preparing surfaces by brushing with wire brush for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat VG 30 grade and applying bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix rolled and compacted to required gradient and camber with 8 to 10 ton power roller and applying sand seal coat with 0.06cum of sand mixed with 6.80Kg of bitumen applied and rolled to a uniform smooth surface all as specified. Note:- Bituminous premix carpet shall be laid by paver and mixed in hot mix plant only.

M&L for continuous brick edging with width equal to the width of the brick laid on and vertically complete all as specified and directed.

M&L for PCC (1:4:8) type D2, cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' old size fly ash brick straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as directed.

M&L cement concrete type C1 1:3:6 (40mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.

M&L M-25 reinforced cement concrete (design mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use & waste of formwork to suspended slabs such as roof slabs floor slabs and similar work exceeding 200mm wide rough finish flat surface complete all as specified and directed.

Use & waste of formwork to side of concrete foundation footings bases of coloumns raft and raft beams sides and sofits (if any) of foundation and plinth beam and similar work vertical or rough, finish flat surface complete all as specified and directed.

Use & waste of formwork to edges of concrete flats breaks in floors opening in concrete walls floors and roofs and sides of RCC/PCC bends rough finish flat surface complete all as specified and directed.

M&L reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) as walls retaning walls, basements walls ballast walls and the like any thickness above top of footing including attached pilasters and buttresses and the similar complete all as specified and directed.

Use and waste of form work to faces of walls retaining walls abutments parapets and stair cases rallings and similar work including attached facias complete all as specified and directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binsing with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L providing cement concrete (1:2:4) type B1 using 20mm stone aggregate as in coping bed block including use & waste of formwork in any position and shape complete all as specified and directed.

M&L rendering 15mm thick in CM (1:4) on fair faces of brickwork or concrete surface finished even & fair complete all as specified and directed.

M&L rendering 15mm thick in CM (1:4) on other then fair faces of brickwork or concrete surface finished even & fair complete all as specified and directed.

S&F in repairs Cat eyes 100 x 100 x 18.5mm size made out of poly carbonate and ABS moulded body dynamically designed very high impact strength and fitted with 2 Nos highly reflective reflectors (Red/ Yellow colour) including epoxy glue complete all as specified and directed. Make: Dark eye DA-978 OR TECHNO COMMERCIAL EQUIVALENT

M&L solar delinator 80mm dia, 145mm height made out of poly carbonate clear, U.V resistant protected wutg mesh, solar panel of monocry stalize 2.5 volt/800MA battery 02 Nosx12 volts, 1600MAH, blinking type red colour with back up minimum 36 hrs and pole height 1.00mt complete all as directed.

Preparation of black bituminous road surfaces and applying thermo plastic road marking paint minimum 2mm thick with an applicator machine and heated mixed with strilling machanisam at temperature 160 degree celcius laid uniformly paint conforming to IS 3262 Part I-II of 1989 etc complete as per manufacturers instructions all as specified and directed.

S&F in repairs solar road stud aluminium alloy body of size not exc 125 x 125 x 25mm, (red colour) with battery i.e Ni-MH- 1600mAh 12 volts , LED -06 Nos blinking type, back up exc 48 hrs fixed with epoxy glue.complete all as directed. Make: DA-110/SOLAR STUD DHRUV or equivalent in 3M

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Material and labour for point wiring complete with ISI marked 1.5 Sqmm PVC insulated unsheathed multistranded single core cable with copper conductor (FRLS) 1100 volts grade drawn through and including PVC rigid conduit 20 mm or higher dia ISI marked as required at site including conduit accessories such as Junction Boxes, Inspection Covers etc, concealed/surface type on stone/brick masonry walls, roofs, floors etc by means of saddles and clamps etc including PVC gang boxes as required at site for concealed/surface conduit wiring and modular plates & covers as required at site for housing switches sockets, regulators etc. including providing of 1.5 Sqmm PVC insulated multistranded unsheathed FRLS copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for and connecting up complete for the following:-

One light/ fan point controlled by one, one way switch

One light point controlled by one two way switch

One bell point controlled by one bell push

One 3 pin 5 Amps switch socket outlet point on independent board

One 3 pin socket outlet 5 Amps on the same board with other switches.

M&L for point wiring complete with 4 Sqmm PVC insulated unsheathed single core multi standard copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/ in existing Conduit on Ceiling and Terminated to sunken box of modular type including white cover plates suitable for fixing switches, sockets etc including 4 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old one complete all as specified and directed for 3 in one 3 pin socket outlet. 15 amps, independent:- Make For Copper wire : Finolex/Havells/Gloster/KEI. For PVC conduit : Polyplast/ GM/Modi/Finolex/Plaza NOTE : The Contractor is responisible for arranging all tools required at site.

S&F metal clad earth socket controlled by MCB SP 5 to 32 Amps complete all as specified and directed.

S&F in repairs MCB single pole 5 Amps to 32 Amps 10 KA,'C' curve complete.

S&F in repairs MCB SPN 240 Volts 32 to 40 Amps 10 KA,'C' curve complete

S&F in repairs sheet metal enclosure DB TPN 4 way 3 phase 4 wire 200 Amps rated busbar capacity double door vertical type including incoming 4 pole MCCB 100A, 16 KA, breaking capacity complete. Make: L&T/Legrand/Schnieder.

S&F in repairs sheet metal enclosure MCB DB SPN double door type AC 240 V 12 way with 200 Amps rated bus bar, including taking down old one complete and making good of distructed surface complete Make- L&T/Legrand/Schnieder

S&F in repairs Single pole and neutral enclosure with two pin and earthplug and socket complete with one single pole MCB 5 to 32 Amps for geyser/AC connection complete. Make:- L&T/Legrand/Schnieder

S&F in repairs Two module telephone socket and TV socket, complete all as specified and directed.

S&F in repairs socket outlet 2/ 3 pins 6 Amps ISI marked modular type 2 module,complete.

S&F in repairs socket 6A/16A,3/5 pin 2 module multi purpose type complete all as directed.

S&F in repairs Bell push 6 Amp 1 module complete all as directed.

S&F in repairs Modular switch one way 6 Amp 1 module complete all as directed.

S&F in repairs Modular switch two way 6 Amp 1 module complete all as directed.

S&F in repairs Modular switch one way 16 Amp 1 module complete all as directed.

S&F in repairs Lamp holders insulated body card grip pattern suitable for batten/angular complete

S&F in repairs ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete

Taking down ceiling fan of any make, sweep and dismantling, cleaning , greasing, overhauling and providing two coat of synthetic enamel paint of existing colour and refixing to its existing place including connections with new flexible cable 3 core copper conductor complete and adjustment for providing new down rod including new canopy, clamp, rubber reel, all as directed.

M&L for sub main wiring complete with 2 runs of 6 Sqmm FRLS copper conductor PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 1 run of 6.0 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old wiring complete all as directed by Eng-in-charge

M&L for sub main wiring complete with 2 runs of 4Sqmm FRLS copper conductor PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 1 run of 4.0 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete all as directed by Engr-in-charge. Make For item No. 144 & 145 Copper wire : Finolex/ Havells/ Gloster/ KEI. For PVC conduit : Polyplast/ GM/Modi/ Plaza/Finolex NOTE : The Contractor is responisible for arranging all tools required at site.

S&F in repairs Modular five speed Fan Regulator 240 V AC complete

S&F in repairs Bell ding dong, AC 230V complete all as directed .

S&F in replacement indoor industrial type surface/wall mounted LED integral batten 20W, 6500K CCT, aluminium extruded body and polycarbonate diffuser, <10%THD, integral elctronic driver complete fixing with all accessories prewired and including connecting up with two core flexible copper conductor cable with suitable size complete removing unserviceable fittings all as specified and directed. Make : Havells Cat part:LUMILINEBS20WLED830SPCSS or equivalent in Philips/Jaquar/Shakthi

S&F in replacement indoor industrial type surface/wall mounted LED integral batten 10W, 6500K CCT, aluminium extruded body and polycarbonate diffuser, <10%THD, integral elctronic driver complete fixing with all accessories prewired and including connecting up with two core flexible copper conductor cable with suitable size complete removing unserviceable fittings all as specified and directed. Make : Havells Cat part:LUMILINEPLUSBS10WLED865SPCS or equivalent in Philips/Jaquar/Shakthi

M&L Earthing complete with GI earth plate electrode 600x 600 x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge not less than 1.5 m below ground level connected of GI earth wire 4mm dia by means of bolots, nuts, check nuts and washers of galavanized iron or steel incl necessary excavation and RCC M-20 mix, watering pipe funnel, PCC pit complete and frame work complete as shown in electrical plate No.3 of MES Sch `A' Part I complete

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire complete all as specified and directed

S&F in repairs post top lantern LED type 15 watt 230 watts volts AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp along with necessary wiring,accessroies complete all as directed. Make: Havells cat part no CORALMINIPT15WLED757PSYMTOPC or Equivalent in Philips/wipro/Shakti

Taking down old geyser from any height of any make/capacity and handed over to MES store yard

Taking down/fixing carefully existing serviceable electric meters single phase and and refixing the same its original location after completion of building renovation work complete.

Supply & fixing of light duty exhaust fan,A.C, single phase,50Hz, 230/240 V of size 230 mm sweep, with minimum 900 rpm with louvres, and wire mesh for suitable size to be fixed before fixing of louvers,including making circular hole on a wall suitable for the exhaust fan & making good the destructed surface including two coats of paint to match the existing wall shade. necessary wiring along with necessary accessories etc, complete all as specified and directed . Make: Havells/CG/Almonard

Supply and fixing of Energy efficient 5 Star Rating,dust proof, ISI Marked, Ceiling Fan 1200 mm Sweep size, white/ivory color, copper winding with minimum air delivery of 230 cu.mtr/min,A.C, single phase,motor with decorative ring, twisted wire, 230 volt 50 Hz including canopy set , fliexible copper conductor fixing with necessary lugs,including necessary hook, rubber bush & safety pin shackle assembly all necessary accessories complete all as directed by Engr-in-charge. Make: CG/Havells/Almonard

Supply, testing & installation of electric storage geyser of capacity 25 Ltrs, BEE five star rated, 230Volts, A.C, 50Hz, comprising of heating element 2000watts,puff insulation,both power indicating led lamp and heating indicating led lamp, necessary suitable 3 core copper cable,suitable plug top, including supply and fixing of inlet and out let connection to geyser with steel grip,chromium plated PVC connection of 600mm in length -02 Nos( one for inlet GI pipe and other one for outlet connection) (out let PVC connection should capable to withstand the designed temperature of Geyser and geyser should be fixed on wall/surface with wall mount bracket and 10 cm anchor bolts as required including all necessary plumbing works, civil works complete all as directed . Make of geyser: Havells/AO smith/Racold

Taking down carefully storage type water heater (geyser) any make capacity from clamp nut/bolts including disconnecting water and electric connection and refixing the same after renovation of building if any connecting up after cleaning of geyser and refixing the same complete all as directed.

S&F Rigid non metallic PVCconduit, 20mm external dia,exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknut, saddles, pipe hooks etc, complete.

S&F1x25W LED road way lighting luminaries with Pressure die-cast powder coated LED street light toughned glass suitable for Building light clear acrylic cover and complete accessories including Driver with suitable connection Lens embedded pc cover having bottom opening seperate driver compartment with IP 66 protection and impact resistance of IK08 complete all as specified and directed. MAKE: Havells cat part no ENDURASUNDOWNSL25WLED765PASYBOTGIHD or equivalent in philips/wipro/ Shakti

Supply and install inverter type hi wall split AC units indoor & outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR , with and including MS wall mounted bracket complete all as specified and directed by Eng-in-charge. Make :- Voltage/LG/Samsung/Blue Star

M&L for sub main wiring complete with 2 runs of 2.5 Sqmm PVC FRLS insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit surface mounting of suitable size and connecting terminal ends to meters and DB's including provision of 1 run of 2.5 Sqmm PVC FRLS insulated copper cable for earth continuity conductor and connecting to earth all as directed by Eng-in-charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp/32Amps MCB complete all as specified. Make :- Havells/CG/Indo Asian

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA. Make :- V-Guard / Volina/ Microtek/ AE

S&F repair corner glass shelf with bracket of complete all as specified and directed.

CHAVA CONSTRUCTIONS AND ELECTRICAL PROJECTS

Maruthi international