Maintenance of existing main water supply pipeline , replacement of valves, replacement of filter media, development of tube wells in WTP at Nangal and repair or maintenance of sluice valve chamber and other maintenance work in Nangal water supply ar

Amount

Earth work of silt clearance of channels and drains :- (b) Basket work with combined lead upto 7.50 metres undressed. (CSR Item No. =6.1 (b))

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- (a) Top Layer:Top layer :- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. (CSR Item No. =28.51 (a))

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- (b) Second Layer :- Coarse sand screened, cleaned and washed and graded from 3mm to 6mm (from Pathankot or approved equivalent quarry). (CSR Item No. =28.51 (b))

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- (c ) Third Layer :- Bajri screened, cleaned and washed and graded from 6mm to 20mm (from Pathankot or approved equivalent quarry). (CSR Item No. =28.51 (c ))

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- (d) Fourth Layer :- Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm (from Pathankot or approved equivalent quarry). (CSR Item No. =28.51 (d))

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- (e ) Bottom Layer :----- Broken stone, screened, cleaned and washed and graded from 50mm to 75mm (from Pathankot or approved equivalent quarry). (CSR Item No. =28.51 (e))

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. (a) Capacity of Air compressor 300 cfm at 250 PSI (labour Rates) (CSR Item No. =28.81 (a))

Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect (c ) 80mm i/d Cast Iron Foot valves (CSR Item No. =28.131 (c ))

Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect d. 100mm i/d Cast Iron Foot valves (CSR Item No. =28.131 (d))

Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect e. 150mm i/d Cast Iron Foot valves (CSR Item No. =28.131 (e))

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. B. Class PN-1.0 as per ISI with gun metal flap (b) 100mm i/d Non-return valve (CSR Item No. =23.31 B b)

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. B. Class PN-1.0 as per ISI with gun metal flap (d) 150mm i/d Non-return valve (CSR Item No. =23.31 B d)

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. B. Class PN-1.0 as per ISI with gun metal flap (e ) 200mm i/d Non-return valve (CSR Item No. =23.31 B e)

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. B. Class PN-1.0 as per ISI with gun metal flap (f) 250mm i/d Non-return valve (CSR Item No. =23.31 B f)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI a. 80mm i/d Sluice Valves flanged (CSR Item No. =28.27 B (a))

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI b. 100mm i/d Sluice Valves flanged (CSR Item No. =28.27 B (b))

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI c. 150mm i/d Sluice Valves flanged (CSR Item No. =28.27 B (c))

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI d. 200mm i/d Sluice Valves flanged (CSR Item No. =28.27 B (d))

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI e. 250mm i/d Sluice Valves flanged (CSR Item No. =28.27 B (e))

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI f. 300mm i/d Sluice Valves flanged (CSR Item No. =28.27 B (f))

Cement concrete 1:6:12 (b) With stone aggregate 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type (CSR Item No. =10.8 b ii)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (CSR Item No. =10.20)

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete (CSR Item No. =18.18)

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth (CSR Item No. =11.3 i)

12.5 mm thick cement plaster 1:6 (CSR Item No. =15.11)

Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients,jointed with rubber tyton joints fitted complete including all cartage. 80mm i/d pipe lines laid complete (a) 80mm i/d pipe lines laid complete (CSR Item No. =28.7 A (a))

Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients,jointed with rubber tyton joints fitted complete including all cartage. 80mm i/d pipe lines laid complete (b) 100mm i/d pipe lines laid complete (CSR Item No. =28.7 A (b))

Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients,jointed with rubber tyton joints fitted complete including all cartage. 80mm i/d pipe lines laid complete (c) 150mm i/d pipe lines laid complete (CSR Item No. =28.7 A (c))

Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients,jointed with rubber tyton joints fitted complete including all cartage. 80mm i/d pipe lines laid complete (d) 200mm i/d pipe lines laid complete (CSR Item No. =28.7 A (d))

Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients,jointed with rubber tyton joints fitted complete including all cartage. 80mm i/d pipe lines laid complete (e) 250mm i/d pipe lines laid complete (CSR Item No. =28.7 A (e))

Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete. a. 80mm (CSR Item No. =28.10 a)

Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete. b. 100mm (CSR Item No. =28.10 b)

Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete. c. 150mm (CSR Item No. =28.10 c)

Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete. d. 200mm (CSR Item No. =28.10 d)

Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete. e. 250mm (CSR Item No. =28.10 e)

Bidder Name

Amount in Words

THE DASGRAIN CO OP L AND C SOCIETY

ANMOL KATYAL CONTRACTOR

SUBASH CHAND

SUBASH CHAND

THE DASGRAIN CO OP L AND C SOCIETY