PROVN FOR PVC WALL PANELLING AND ADDITION ALTERATION TO BUILDING AT ICGS KAVARATTI UNDER GE NAVY LAKSHADWEEP

Amount

Taking down chowkhats or frames with shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and as directed by Engineer in Charge.

Dismantaling floor, hearth or wall tiling including cement morter bedding and removing the rubbish off the permises complete all as specified and directed by Engineer in charge.

Taking down Shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed by Engineer in charge.

Demolition of Brickwork or stone/boulder masonry/PCC Block masonry laid in cement mortar or cement lime mortar complete all as specified and directed by Engineer in charge.

Excavating in trenches in Hard/ Dense soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, shafts, wells, cesspits, manholes, pier holes, etc and getting out complete all as specified and directed by Engineer in charge.

Removing excavated material n exc. 50 Mtr and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer in charge.

Material and labour for PCC 1:3:6 type C2 40 mm graded aggregate In , filling and mass-concrete, wall footing PCC etc complete all as specified and directed by Engineer in charge.

Material and labour for Pre -cast cement concrete block masonary with solid blocks, Type C-1, 1:3:6 (using 20mm graded aggregate), set in cement mortar (1:6) complete all as specified and directed by Engineer in charge.

Material and labour for Rendering in cement mortar (1:6), 10mm thick on fair face of brick work (Internal surface) and finised even and smooth without using extra cement complete all as specified and directed by Engineer in charge.

Material and labour for Rendering in cement mortar (1:4), 5mm thick with and including water proofing compound over and including 10 mm thick plaster in CM (1:6) on fair face of brick work (External surface) and finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer after applying one coat of wall care putty complete all as specified and directed by Engineer in charge.

Material and labour for preparation of old plastered or un plastered surfaces on walls and applying single coat of Oil Bound Distemper complete all as specified and directed by Engineer in charge.

Material and labour for preparation of old plastered or un plastered surfaces on ceiling and applying single coat of White wash complete all as specified and directed by Engineer in charge.

Material and labour for preparation of old plastered or unplastered surfaces and applying exterior emulsion weather proof paint (Apex Ultima or equivalent as approved by GE), of any colour, single coat on wall, column projection, chajja sides and bottom etc... completel all as specified and directed by Engineer in charge.

Material and labour for preparation of newly plastered surfaces and applying exterior emulsion weather proof paint (Apex Ultima or equivalent) of any colour, two coats, over a coat primer and a coat of cement based exterior wall care putty not less than 1mm thick, on wall, column projection, chajja sides and bottom etc.. complete all as specified and directed.

Material and labour for providing TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer in charge.

Material and labour for Cement concrete type A1, (1:1.5:3), 20 mm graded aggregate in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed by Engineer in charge.

Material and labour for Cement concrete type B1, (1:2:4), using 20 mm graded aggregate in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, complete all as specified and directed by Engineer in charge.

Material and labour for Glazed ceramic tiles coloured of size 350 x 250x 7mm/ 450 x 350 x 7mm laid on vertical surface set and jointed in neat cement slurry and pointed in white and colour cement to match over 10 mm thick cement plaster in (1:4) complete all as specified and directed

Material and labour for Non skid Ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tile exc.0.11sqm but n.exc 0.18sqm (size 400 x 400mm), in floor etc. set and jointed neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer in charge.

Material and labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match-including provision of screed bed 15mm thick in CM(1:4) complete all as specified & as directed by Engineer in charge.

Supply and Fix MS hold fast, wall ties and silmilar articles confirming to Fe-290 Grade E-125 complete all as specified and directed by Engineer in charge.

Supply and fix Anodised aluminium frames with power coated sections (minimum thickness of powder coating shall be 50 micron) for doors, window,ventilators etc. with one or more rebates inclunding joining cleat for fixing etc. including taking down existing old frame of any description complete all as specified and directed by Engineer in charge.

Supply and fix 4.8 mm thick sheet glass, ordinary quality, glazing with clips and rubber beading complete all as specified and directed by Engineer in charge.

Supply and fix Aluminium composite Panel (ACP), 4 mm thick, with and including Aluminium framework for fixing on concrete/wall surface including necessary fixing arrangement complete all as specified and directed by Engineer in charge.

Supply and fix Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-21 complete all as specified and directed by Engineer in charge.

Supply and fix Aluminium anodised, barrel tower bolts of extruded section, size 200 mm, complete all as specified and directed by Engineer in charge.

Supply and fix Extruded aluminium alloy handles, fabricated type, anodised, size 150 mm complete all as specified and directed by Engineer in charge.

Supply and fix Aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, 250 mm size, complete all as specified and directed by Engineer in charge.

Supply and fix Mild steel Mortice lock, vertical type, size 100mm, 4 lever, complete all as specified and directed by Engineer in charge.

Supply and fix Aluminium Door closer (Extruded section), hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer in charge.

Taking down 15/20 mm dia steel / PVC water pipe and connection including all fittings complete all as specified and directed by Engineer in charge.

Supply and fix 20 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugs hose clips etc and fixing cutting through walls, floors and their making good or layilng in trenches and also cutting, screwing including wastage, complete all as specified and directed by Engineer in charge.

Taking down 25 mm dia steel / PVC water pipe and connection including all fittings complete all as specified and directed by Engineer in charge.

Supply and fix 25 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugs hose clips etc and fixing cutting through walls, floors and their making good or layilng in trenches and also cutting, screwing including wastage, complete all as specified and directed by Engineer in charge.

Supply and fix in repair vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain and flushing pipe, antisyphonage pipe etc. complete all as specified and directed by Engineer in charge.

Supply and fix in repair vitreous china wash basin, white, flat back of size 630x450mm, excluding taps, but including brackets, complete all as specified and directed by Engineer in charge.

Supply and fix in repair CP health faucet with all accessories including 1 Mtr long connecting pipe, complete all as specified and directed by Engineer in charge.

Supply and fix in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed by Engineer in charge.

Supply and fix cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75mm, fixed in repairs complete all as specified and directed by Engineer in charge.

Supply and fix in repairs, bathroom cabinet of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror complete all as specified and directed by Engineer in charge. (Make: Commander/Prayag or equivalent as approved by GE )

Supply and fix in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' woth long shanks and flynuts, screwed for iron pipe complete all as specified and directed by Engineer in charge.

Supply and fix in repairs brass chromium plated two way angle stop cock 15mm bore complete all as specified and directed by Engineer in charge.

Supply and fix in repair brass chromium plated shower rose with pipe, 125 size, including fixing to steel pipe or union complete all as specified and directed by Engineer in charge.

Supply and fix in repair 15 mm dia Bip Taps, fancy type, Chromium plated (CP) with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer in charge.

Supply and fix in repair 15mm dia stop valves , fancy type, chromium plated (CP), scwewed down high pressure with crutch or butterfly handle screwed both ends or iron pipe or for unions complete all as specified and directed by Engineer in charge.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 750mm complete all as specified and directed by Engineer in charge.

Supply and fix in repair grating 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed by Engineer in charge.

Supply and fix chromium plated Tubular towel rail, 20 mm dia, with a pair of CP brackets, complete all as specified and directed by Engineer in charge.

Supply and fix Bamboo curtains/ blinds along with necessary fitting clips, rails, brackets et complete all as specified and as directed by Engineer in charge.

Supply and fix GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed by Engineer in charge.

Supply and fix Hangers 6 mm dia., G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm, size 60mm long and expansion hold fasteners 12.5mm dia., 40mm long complete all as specified and directed by Engineer in charge.

Material and labour for providing and fixing Gypsum Board 12mm thick as in false ceiling, fixed with screws to GI frame work for seamless ceiling as per manufacturers instructions, complete all as specified and directed by Engineer in charge. (Note: GI frame work to be measured and paid separately)

Material and labour for preparation of new surfaces of ceiling / false ceiling and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer and a coat of putty complete all as specified and directed by Engineer in charge.

Material and labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of nominal size 1.5 sqmm with multi stranded copper conductor single core in and including rigid PVC conduit / casing capping not less than 20 mm dia, with suitable MS terminal boxes (not less than 1.0 mm thick )/ terminal boxes for modular switches and socket as per requirement . MS terminal boxes shall be painted with one coat of red oxide primer all around including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and as directed for the following item no 56 to 58 :-

One light/fan point controlled by one switch

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 55 here-in-before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, Flame Retardant Low Smoke (FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and as directed by Engineer in charge.

Supply and fix sub main wiring with two runs of single core 2.5 sqmm size stranded copper conductor PVC insulated unsheathed cable, Flame Retardant Low Smoke (FRLS) in and including 20 mm dia PVC rigid non metalic conduit and one run of PVC insulated cable of size 2.5 sqmm size solid copper conductor for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and as directed by Engineer in charge (Note: 2 runs of single core 2.5 sqmm cable, one run of 2.5 sqmm earth cable and one run of 20mm PVC non metalic conduit shall be measured as one length).

Supply and fix ceiling rose, 3 terminal polycarbonate , isolated body complete all as specified and directed by Engineer in charge.

Supply and fix in replacement modular switch, 1 way, 6 Amp, 1 module complete all as specified and directed by Engineer in charge.

Supply and fix in replacement modular socket 6 Amps, 2/3 pin combined 2 module complete all as specified and directed by Engineer in charge.

Supply and fix in replacement modular switch, 1 way, 16 Amp, 1 module complete all as specified and directed by Engineer in charge.

Supply and fix modular socket, 6/16A, 2/3 pin combined 2 module complete all as specified and directed by Engineer in charge.

Supply and fix in replacement modular fan regulator, 120 Watt, 2 module hum free complete all as specified and as directed by Engineer in charge.

Supply and fix in replacement retro LED tube light fitting with PC body alongwith decorative box type fitting, batten with blue coloured end caps suitable pre wired for tube complete all as specified and as directed by Engineer in charge. Make:- Crompton, Cat Part No:- LCCLB16-CDL tube fitting or its equivalent in Philips/Bajaj/Wipro as approved by GE.

Supply and Fix Ceiling Fan 1200 mm sweep complete with necessary fixing accessories such as clamps, nuts, bolts, cottor pins and testing complete all as specified and as directed by Engineer in charge. Make:- Crompton/Baja/Orient/Usha as approved by GE.

Supply and Fix Exhaust Fan 300 mm sweep complete with necessary fixing accessories such as clamps, nuts, bolts, cottor pins and testing complete all as specified and as directed by Engineer in charge. Make:- Crompton/Baja/Orient/Usha as approved by GE.

Supply and fix in replacement sheet metal enclosure with two pin socket, chain plug cover with MCB SPN of 20 Amp capacity with alingment 10 KA 'B' series complete all as specified and directed by Engineer in charge. Make:- Havells/Legrand/ABB as approved by GE.

Supply and fix in replacement MCB SPN 40 Amp 240 V, 50 Hz, complete all as specified and directed by Engineer in charge. Make:- Havells/Legrand/ABB as approved by GE.

Supply and fix in replacement MCB SP 5 to 30 Amp 240 V, B Series, complete all as specified and directed by Engineer in charge. Make:- Havells/Legrand/ABB as approved by GE.

Supply and fix in replacement MCB DB SPN 8 Way 240 V, 50 Hz, with 200 A rated copper busbar complete all as specified and directed by Engineer in charge. Make:- Havells/Legrand/ABB as approved by GE.

Supply and fix in replacement LED ceiling lights 36 W fixure size 2 ft x 2 ft fitting having colour temperature 4000K with extruded aluminium heat sink housing complete with all accessories and internallly pre-wired and including connecting up with twin core twisted flexible copper conductor (Cat No. LCBOR-36-CDL in Crompton or its equivalent in Havells/Bajaj/Philips as approved by GE) complete with all accessories complete all as specified and as directed by Engineer in charge.

Supply and fix in replacement surface mounted LED fittings with extruded aluminium heat sink housing complete with all accessories lamp type 10 W LED 2 feet length and internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as pecified and as directed by Engineer in charge. Make:- Havells, Cat Part No:- LHEWEBP61N1W010 or equivalent in Bajaj/Philips/Crompton as approveed by GE.

Supply and fix in replacement pf unserviceable building security lights, surface mounted LED fittings, 45 Watt with extruded aluminium heat sink housing and IP 66 protection complete with all accessories and internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as pecified and as directed by Engineer in Charge. Make:- Crompton, Cat Part No:- LSTP-45-CDL or its equivalent in Havells/Bajaj/Philips as approved by GE.

Material and labour for providing solid PVC wall lining consisting of 5 mm thick wooden grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frames complete as per manufacturers instructions complete all as specified and as directed by Engineer in Charge.

Material and labour for providing 5mm thick PVC sheet fillets of width 35 mm for wall panelling including fixing on the wall to make PVC frames as per manufacturers instructions complete all as specified and as directed by Engineer in Charge.

R.K. Builders

STANDARD ENGINEERING