Construction of Plant room of size 80 x 25 x 16 for housing 3000 LPM Oxygen Generator Plant at Associated Hospital of GMC Kathua.

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms , incl. disposal or filling of excavated earth wherever required as per the directions of Engineer-in-charge .

Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work including material and labour incl. all leads and lifts, carriage of material by MT/HL.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L.-All work upto plinth level.

1 : 5 :10 ( 1 cement : 5 fine sand : 10 graded crushed stone aggregate 40 mm nominal size) .

1 : 3 : 6 (1 cement : 3 coarse sand :6 graded crushed stone aggregate 20 mm nominal size) .

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand: 3 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level including all leads, lifts and carriage of material by MT / H.L.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Cold twisted bars incl. all leads, lifts and carriage of material by MT / H.L.

Centring and shuttering including strutting propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform.

Weather shade. Chajjas, corbels etc., including edges.

Edges of slabs and breaks in floors and walls under 20 cms wide.

Column, pillars, Piers Abutments, posts and struts

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level (By manual means) incl. all leads, lifts & carriage of material by M.T. H.L.

6 mm thick plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) incl. all leads, lifts and carriage of material by M.T / H.L.

12 mm cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) including all leads, lifts and carriage of material by M.T / H.L.

15mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) incl. all leads, lifts & carriage of material by M.T / H.L.

Supplying & filling in plinth with fine sand under floors including, watering, ramming, consolidating, dressing incl. all leads and lifts and carriage of material by MT / H.L.

Providing & laying damp proof course 50 mm thick with cement concrete 1 :2: 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) incl. all leads, lifts and carriage of material by MT / H.L.

Making plinth protection 50 mm thick of cement concrete 1:3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed & consolidated & grouted with fine sand including finishing the top smooth. Crushed aggregate including all leads, lifts and carriage of material by MT/H.L.

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm incl. cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of penetration 80/100

10 cm thick mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/cum of earth and gobri leaping with mix 1 : 1 ( 1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed with 2% of integral water proofing compound by weight of cement & finished neat with hand moulded F.P.S. brick tiles incl. all leads, lifts & carriage of material by MT/ H.L.

Providing gola 75 x 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 10mm down gauge) incl. finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75 x 75 mm deep chase incl. all leads, lifts & carriage of material by MT/ H.L.

Making Khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete incl. all leads, lifts & carriage of material by MT/ H.L.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & confirming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) incl. grouting the joints with white cement & matching pigments etc. complete Size of tile 60cm x 60cm incl. all leads, lifts & carriage of material by MT / H.L.

Providing and fixing on wall face un- plasticized rigid PVC rain water 110 mm dia pipes conforming to IS : 13592 Type -A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion single socketed pipes

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion. Bend 87.5* 110mm.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In granting, frames, guard bar, ladders railing, brackets, gates & similar works.

Providing and applying White Cement based Putty of average thickness 2 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .Water thinable Cement primer

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with textured exterior paint of required shade on New work(two or more coats applied @ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing wood work in frames of Sal wood in doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)

Providing and fixing 35 mm thick Wire Gauze shutters using galvanised M.S. wire gauge of average width for aperture 1.4 mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges & necessary screws. ISI marked M.S. pressed bright finished butt hinges with necessary screws of required size. Second Class deodar wood.

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing panelled or panelled and glazed shuttersof Second class deodar wood for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.

Providing 40x 5 mm flat iron hold fast 40cm long incl. fixing to frame with 10mm diameter bolts nuts and wooden plugs with embeddings in cement concrete blocks 30x10x15 cm 1:3:6 mix ( 1 cement: 3 coarse sand: 6 Graded stone aggregate 20mm nominal size including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing aluminium tower bolts ISI marked(anodized anodic coating not less than gradeAC 10 as per IS: 1868 transparent or dyed to required colour or shade with necessary screws etc.complete

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminum sliding door bolts 300 x 16 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:

Providing and fixing in position collapsible steel shutters with vertical channels 20x10 x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 em long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters: 80x1.25 mm M.S. laths with 1.20 mm thick top cover

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

Wiring for light point/ fan poiint/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/rececessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.

Supplying and fixing following sizes/ Modules, GI box along with modular base and cover platefor modular switches in recess etc. as required.8 Module

Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way ( 4+18), (Double door)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 10/16 amp.

Single pole and neutral 32 amp.

Supplying and fixing of Electrical items along with making connections etc as required

SPN 63 Amp

Round Sheet

Fan Sheet

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. Ceiling fan 1200 mm sweep along-with rod up-to 2'-6" long as required.

Supplying and fixing of 70 (+/- 5) watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall including wiring with 1.5 sq.mm FRLS PVC insulated copper wire with individual controlling switch.

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly and having ROHS certification GI Electrode Earthing should be maintinance free and does not require regular manual addition of water GI Electrode shall be tested from CPRI. The earthing pit should be covered with PVC cover.

Providing and fixing 25 mm X 3 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying of following LED fixtures. 20/22 watt LED 4 feet tube light fitting/fixture CRCA housing with 2000 Lumens and min lumens efficiency 100 Lumens/watt P.F 70.95 THD < 16% & voltage input range 140-270 V with Shot circuit & overloading protection circuit off

M/S DEEPAK KUMAR GUPTA

Sanjiv Kumar Sharma

VIJAY KUMAR

PAWAN KUMAR