Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹18.4 L
EMD Value
₹36,830
Closing Date
30 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Foundry & Forge Division Bangalore
HINDUSTAN AERONAUTICS LIMITED Foundry & Forge Division Bangalore
Renovation / repair / modification works at Alloy Fabrication shop in Foundry and Forge Division HAL BC
10081
F/DGM ES N FP / E-TN/26/314/2024
Works
Bangalore Complex- Foundry and Forge Divn
₹0
₹36,830
30 Oct 2024
9 Oct 2024
9 Oct 2024
30 Oct 2024
HINDUSTAN AERONAUTICS LIMITED Foundry & ForgeDivison BANGALORE
NAME OF THE WORK: Renovation/repairing/modification works at Alloy Fabrication shop in Foundry & Forge Division, HAL (BC).
CONTRACT No. HAL/FNF/CIVIL/R-007/24-25 DURATION : 5 Months
PRICE BID (PART-II)
Name of the firm :
Sl. No Specification of item Quantity Unit Rate in Fig including GST in words Basic Rate Excluding GST in Figures Basic Rate Excluding GST in words Total Amount excluding GST in Figures (E=C*A)
1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar (1:6) 15.00 cum 1892.77 Rupees One Thousand Eight Hundred Ninety Two and Seventy Seven Paise Only 28391.55
2 Dismantling/Taking out doors, windows, wire mesh and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres 200.00 Sqm 461.89 Rupees Four Hundred Sixty One and Eighty Nine Paise Only 92378.00
3 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in RS Joists 2000.00 Kgs. 3.12 Rupees Three and Twelve Paise Only 6240.00
4 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead 150.00 Sqm 51.77 Rupees Fifty One and Seventy Seven Paise Only 7765.50
5 Refixing old glass panes with putty & nails, including cost of scaffolding, cost of putty & nails, labour etc. complete, as per the direction by Engineer-in-charge 25.00 Sqm 670.53 Rupees Six Hundred Seventy and Fifty Three Paise Only 16763.25
6 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 30.00 cum 2236.42 Rupees Two Thousand Two Hundred Thirty Six and Forty Two Paise Only 67092.60
7 Dismantling G.S. or G.I. sheet roofing including ridges, hips, Valleys and gutters etc., and stacking the material within 50 metres lead 100.00 Sqm 151.54 Rupees One Hundred Fifty One and Fifty Four Paise Only 15154.00
8 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 10.00 Sqm 50.21 Rupees Fifty and Twenty One Paise Only 502.10
9 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts complete as per the direction of Engineer-in-charge. Note:- Necessary approvals/ permissions for disposal of waste in muncipal dumping ground, Pollution Control Clearance etc. shall be taken care of by the contractor 14.00 cum 453.94 Rupees Four Hundred Fifty Three and Ninety Four Paise Only 6355.16
10 Cement concrete 1:2:4, (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural resources) 2.00 cum 9091.01 Rupees Nine Thousand Ninety One and One Paise Only 18182.02
11 Reinforced/Plain cement concrete (1:1.5:3) work in floorings, walls/drain walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 21.00 Cum 9970.92 Rupees Nine Thousand Nine Hundred Seventy and Ninety Two Paise Only 209389.32
12 Providing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more etc., complete as directed by EIC 200.00 Kg 99.08 Rupees Ninety Nine and Eight Paise Only 19816.00
13 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia 100.00 RM 130.46 Rupees One Hundred Thirty and Forty Six Paise Only 13046.00
14 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P/brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) Fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 75.00 kgs 454.82 Rupees Four Hundred Fifty Four and Eighty Two Paise Only 34111.50
15 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P/brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) For Shutters Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 50.00 kgs 549.95 Rupees Five Hundred Forty Nine and Ninety Five Paise Only 27497.50
16 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P/brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm 50.00 Sqm 286.64 Rupees Two Hundred Eighty Six and Sixty Four Paise Only 14332.00
17 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 50.00 sqm 1382.92 Rupees One Thousand Three Hundred Eighty Two and Ninety Two Paise Only 69146.00
18 Providing & fixing zinc alloyed (white powder coated) touch lock for aluminium sliding windows with necessary screws etc.complete, as per the direction by Engineer-in-charge 10.00 Each 187.42 Rupees One Hundred Eighty Seven and Forty Two Paise Only 1874.20
19 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. all complete as directed by EIC. 20.00 Sq.m. 678.62 Rupees Six Hundred Seventy Eight and Sixty Two Paise Only 13572.40
20 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 500.00 Kgs. 122.83 Rupees One Hundred Twenty Two and Eighty Three Paise Only 61415.00
21 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified by Engineer in Charge 100.00 Sqm 1287.46 Rupees One Thousand Two Hundred Eighty Seven and Forty Six Paise Only 128746.00
22 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. on steel work 50.00 Sqm 222.10 Rupees Two Hundred Twenty Two and Ten Paise Only 11105.00
23 FORM WORK:Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc 10.00 Sqm 360.28 Rupees Three Hundred Sixty and Twenty Eight Paise Only 3602.80
24 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) 100.00 sqm 351.87 Rupees Three Hundred Fifty One and Eighty Seven Paise Only 35187.00
25 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour all complete to achieve even shade and colour as per manufacturer's specification. 2000.00 sqm 170.56 Rupees One Hundred Seventy and Fifty Six Paise Only 341120.00
26 Brickwork with common burnt clay machine moulded perforated F.P.S.(non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) Above plinth level upto floor V level 3.00 cum 8365.90 Rupees Eight Thousand Three Hundred Sixty Five and Ninety Paise Only 25097.70
27 Supplying and painting to the existing old floor surface inside the hangar with two coat of chlorinated rubbersed enamel paint of approved colour and make including one coat of primer preparation of old painted surface with cleaning,scraping the existing old paint surface and making ready the floor surface to receive new paint. Scope also includes painting of one coat of yellow line marking of avg width 100 mm to 150 mm at the required places inside hangar floor surface. The quoted rate should be inclusive of thinner, labour , taxes, tools, brushes, loading and unloading, transportation, scaffolding, safety devices etc and all as directed by EIC. 500.00 Sq.m. 150.00 Rupees One Hundred Fifty Only 75000.00
28 Providing and applying gangway marking 150 micron for a width of 100mm for borders applied to required pattern, line alignment with necessary marking tapes, brush, etc., complete as per detailed manufacturer's specification 120.00 RM 200.00 Rupees Two Hundred Only 24000.00
29 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.a) For New/old work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, including labour, material, scaffolding, safety equipments etc.complete 10.00 Sqm 166.52 Rupees One Hundred Sixty Six and Fifty Two Paise Only 1665.20
30 Turbo base Sheet 0.71mm Aluminium Circular (sinusoidal) profile with center to center pitch of 75 mm, depth of 19 mm,overall profile width 1250 mm, cover width 1150mm 100.00 Sqm 1154.80 Rupees One Thousand One Hundred Fifty Four and Eighty Paise Only 115480.00
31 Providing Turbovents over base sheet (MR Rate taken from IndiaMart. Copy Enclosed ) Rate for 10 Turbovents = 2970x10= Rs.29700/- Fixing charges per Turbovent =500x10= Rs.5000/- Total = Rs.34,700/- 22.00 Nos 3470.00 Rupees Three Thousand Four Hundred Seventy Only 76340.00
Total Rupees Fifteen Lakh Sixty Thousand Three Hundred Sixty Seven and Eighty Paise Only 1560367.80 1560382.58
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures ( please do not enter any special character like % symbol) Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount 14.78
Tenderer's Quote (Excluding GST) 1560367.8 BELOW % 1560367.80
Add 18% GST Rupees Two Lakh Eighty Thousand Eight Hundred Sixty Six and Twenty Paise Only 280866.20
Grand Total (Including GST) Rupees Eighteen Lakh Forty One Thousand Two Hundred Thirty Four Only 1841234.00
WARNING: PLEASE ENTER PERCENTAGE QUOTE
Note: 1. The Contractor has to quote percentage Above (Plus)/ Below(Minus) against total itemized BOQ amount for the works as specified above. ( The total value will be considered for commercial evaluation , hence contractor are requested to fill correctly to avoid any issues.) 2. The quoted percentage for the work mentioned above, shall be taken into consideration for evaluation of the tender.The lowest offer (L-1) will be determined considering the total amount including quoted percentage and GST. 3. It is recommended that the agency may make a site visit and estimate the quantum of work before submitting the quotation. No extra claim will be entertained at later stage. 4.Amount towards GST will be paid on the over all amount based on proof of remittence of GST. Payment will be made against invoice. Refer terms & condition for payments. 5. Tender will be evaluated considering prevailing 18% GST . Any variation in the GST (Plus/minus side) during the currency of contract will to HAL account.
HINDUSTAN AERONAUTICS LIMITED
Foundry & Forge Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. F/DGM (ES & FP)/E-TN/ 26 /314/2024
Name of Work: Renovation/repairing/modification works at Alloy Fabrication shop in Foundry & Forge Division, HAL (BC).
Contract No.: HAL/FNF/CIVIL/R-007/24-25
Estimated Amount in Rs.: 19,88,551.56/-
Tender Notice Date : 07.10.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code #N/A #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2023-24 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 #VALUE!
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Related Document to be Uploaded to eProcurement Portal
PF Registration No. with proof if any
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. #VALUE! 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
HINDUSTAN AERONAUTICS LIMITED
Foundry & Forge Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. F/DGM (ES & FP)/E-TN/ 26 /314/2024
Name of Work: Renovation/repairing/modification works at Alloy Fabrication shop in Foundry & Forge Division, HAL (BC).
Contract No.: HAL/FNF/CIVIL/R-007/24-25
Estimated Amount in Rs.: 19,88,551.56/-
Tender Notice Date : 07.10.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code #N/A #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2023-24 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 #VALUE!
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Related Document to be Uploaded to eProcurement Portal
PF Registration No. with proof if any
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. #VALUE! 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TendeNotice.doc
TENDER_DOCUMENT • 0.16 MB
TenderDocument.doc
TENDER_DOCUMENT • 1.20 MB
PriceBidR007F.xlsm
TENDER_DOCUMENT • 0.05 MB
Undertakingformat.docx
TENDER_DOCUMENT • 0.02 MB
PARTA.xlsm
TENDER_DOCUMENT • 0.03 MB
ECS2.docx
TENDER_DOCUMENT • 0.01 MB
CheckList.docx
TENDER_DOCUMENT • 0.01 MB
PQC-007.xlsx
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .