Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹32.5 L+₹4.8 L (17.4%)Rejected-Finance | L2 | Rejected-Finance Higher Bidder | |
| 3 | L3₹32.8 L+₹5.1 L (18.5%)Rejected-Finance VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L3 | Rejected-Finance Higher Bidder | |
| 4 | L4₹33.1 L+₹5.5 L (19.7%)Rejected-Finance | L4 | Rejected-Finance Higher Bidder | |
| 5 | L5₹33.5 L+₹5.8 L (20.9%)Rejected-Finance | L5 | Rejected-Finance Higher Bidder |
Tender Value
Refer Docs
EMD Value
₹66,000
Closing Date
26 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
HQ CWE Ferozepur Cantt PIN-152001
CWE/FZR-41/2023-24 PROVN OF CONSTRUCTION THREE SENTRY POST IN UNIT LOCATION AND 300 MTR PERIMETER WALL UNDER GE (WEST) FEROZEPUR CANTT
2024_MES_636204_1
CWE/FZR-41/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Ferozepur Cantt
₹66,000
Yes
19 Feb 2024
6 Jan 2024
3 Feb 2024
6 Jan 2024
26 Jan 2024
21 Jan 2024
Amount
Sruface dressing n exc 15 cm deep in soft/lose soil complete all as specified and as directed by Engineer-in-Charge.
Excavation in trenches n.exc 1.5 wide and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete in foundation 1:4:8 type D-2 40 mm graded stone aggregatge as in sub base of foundation filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr means built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
Form work to sides of floor or roof beams lintels cantilevers, shelves including support overhangs plinth bands etc complete all as specified and as directed by Engineer-in-Charge.
Form work to soffits of suspended roof slabs not exceeding 200 mm thick (horizontal or slopping rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.
Form work to edges of concrete slabs n exc 20 cm thick complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 6 to 8 mm dia TMT mild steel bars and over cut to length bent to shape and required including cranking bending spirally for hooping for columns hooding ends and binding with and including mil steel wire (annealed) not less than 0-.9 mm dia or secureing with clips quality complete all as specified and as directed by Engineer-in-Charge.
Material and labour for reinforced cement concrete design mix M-25 (20 mm graded aggregate (12.5 mm graded aggregate) as Slab supported on walls beam and column in floor etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering 10mm thick on fair faces of brick work or conc surface in CM (1:6) even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering 15 mm thick on fair faces of brick work or conc surface in CM (1:4) even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge.
Rendering 5 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified and as directed by Engineer-in-Charge.
Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Preparation of New plastered surfaces of ceiling & applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing pressed steel frames for door withonor more rebates of 105 x 60 mm incl necessary fixing lugs hinges lock strike plates etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for IInd class hard wood, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I section-8 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 200mm long MS barrel tower bolt stove enameled black, with bright bolt complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 250mm long MS sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 botls and nuts, four on bolt plate and two on staple plate complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150mm long MS pressed handle oval type stove enameled black complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10 cm width or girth complete all as specified and as directed by Engineer-in-Charge.
Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge. and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
Material and labour for galvanised mild steel wire cloth 0.51mm to 0.56mm nominal dia of wire and average width of aperture 1.18mm to 1.25mm and fixed with timed tacks complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new steel surface and applying two coats of synthetic enamel paint over coat of red oxide primer over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge.
Spreading and levelling of soil obtain from excavation in layers n exc. 25 cm thick well ramming including watering as required complete all as specified and as directed by Engineer-in-Charge.
Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling as mass concrete of post complete all as specified complete all as specified and as directed by Engineer-in-Charge.
Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour 75 mm thick Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface in plinth protection complete all as specified and as directed by Engineer-in-Charge.
Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed by Engineer-in-Charge.
Material and labour Kota stone slabs, 16mm thick, machine cut as in shelf, set and jointed in cement slurry over & including rendering coat of 15 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and as directed by Engineer-in-Charge.
Returning, filling including spreading, levelling, watering and well ramming in layers n.exc 25cm thick each complete all as specified and as directed by Engineer-in-Charge.
Removing excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.
Material and labour for TMT bars10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed by Engineer-in-Charge
Ditto all as per Item no-35 above but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed by Engineer-in-Charge
Material and labour for formwork to rough finished flat surfaces of concrete foundations, footings , bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertica or to batter complete all as specified and as directed by Engineer-in-Charge
Material and labour for formwork to rough finished concrete surfaces of sides of square, rectangular or polygonal pillars posts, struts, piers, coulmns and stanchions complete all as specified and as directed by Engineer-in-Charge
Material and labour for cement concrete design mix M-25 (20 mm graded aggregate) as in beams, cantileveres, bressummers, lintels over 1.50 mtr span and all other similar works complete all as specified and as directed by Engineer-in-Charge
Ditto all as per Item No 39 above but in coulmns,pillars,piers, posts and struts.
Material and labour for cement concrete design mix M-25 (20 mm graded aggregate) foundatios,including rafts,footings,foundation beams,plinth beams,bases for coulmns etc and all other similar works complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and as directed by Engineer-in-Charge (each line wire to be measured)
Supply and fixing rolled mild steel structural work as in post and struts in fencing including cutting tops to shape as directed,drilling holes, notching for wires etc, flat iron fillets (for securing wire mesh etc including all necessary drilling,bolting, welding or riveting etc and all other similar works conforming Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge
Material and labour for preperation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not other described and applying two coats of synthetic enamel paint (ordinary tint) (each coat) over a coat of primer red oxide (zinc chrome) complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 110 mm dia PVC (SWR) pipe single socketd, in any length as in weep holes to boundary wall laid in masonary complete all as specified and as directed by Engineer-in-Charge
Material and labour for Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, /surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches/bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for One light/fan/Bell Point controlled by one single pole one way switch.
Ditto all as per Item No 46 above but one 3 pin socket outlet 5 Amp on the same board controlled by one single pole one way switch
Ditto all as per Item No 46 above but one 5 amps socket outlet independent controlled by one single pole 5 Amp switch.
Ditto all as per Item No 46 above but but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.
Supply and fixing Switch piano flush type 5/6 amps, one way single pole complete all as specified and directed.
Supply and fixing Switch piano flush type 15 amps, one way complete all as specified and directed.
Supply and fixing Socket outlet 3 pin, 5/6 Amps, piano flush type complete all as specified and directed.
Supply and fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.
Supply and fixing ceiling rose surface type, PVC/polycarbonate, isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing LED tube light fitting 1 x 18 Watt decorative ultra slim linear LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 230 V complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing 240V,10 KA'B' curve minirature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp in the MCB DB complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing MCB single pole and neutral 240 V,32 Amp 10 KA 'B' series complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing sub main wiring 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and as directed by Engineer-in-Charge ( Note : Two run of single core 4 sqmm cable and one run single core 4.00 sqmm cable for earth wire and including conduit pipe of 25 mm dia shall be measured as one length)
Material and labour for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and as directed by Engineer-in-Charge. ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)
Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and as directed by Engineer-in-Charge.
Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 5 cm thick after laying of cable in trenches complete all as specified and as directed by Engineer-in-Charge. Notes : (i) Excavation and earth work to be measured and paid separately). (ii) Thickness of 18 cms after punning shall be considered for payment.
Material and labour bricks common burnt clay building bricks sub class 'B' designation 75 laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed by Engineer-in-Charge.
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and as directed by Engineer-in-Charge
Mild steel galvanised iron pipe light grade (ISI marked) 40 mm bore for passing of earth lead laid in trenches fixed to walls laid under floors,roads including all fittings i.e MS clamps nuts & bolts etc as required complete all specifed and as directed by Engineer-in-Charge.
B.L. Chaudhri and Co.
M/s Sarup Singh
M/s Surjit Singh and bros
Manjeet Singh Contractor
M/s Bansi Lal
M/s Shri Krishna Enterprises
R.S.ENTERPRISES
M/s Mukand Lal Khanna
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .