Impregnation repair / rewinding of 100 HP motors alongwith allied works and providing and fitting of Bus bar, 400 ampere, 50 KA MCCB-250 ampere (2nos.), cables alongwith allied works at Jawahar Navodaya Vidhyalaya at Jaganoo

Impregnation / repair / rewinding of 100 HP motors alongwith allied works and providing and fitting of bus bar, 400 ampere, 50 KA 250 ampere MCCB (2nos.) copper cable alongwith allied works at Jawahar Navodaya Vidhyalaya at Jaganoo by decoupling of pump and motor. Dismantling of motor and extraction of rotor from the stator and loading in the vehicle. Repair to rotor shaft by remetalling and turning/finishing to the bearing size and making keyway. Providing new U-clamps and soldering the strip ends. Providing and fitting of side cover of the motor. Complete rewinding of 100 HP motor by way of removing the damaged coils and rewinding of 100 HP motors (2nos.) with new coils, varnishing motors and drying then. Carriage of rotor and stator upto the station and inserting of rotor in the stator and then coupling with pump at site and then testing at load. Job further includes providing and fitting of 400 ampere bus bar on wall 2nos. 250 ampere MCCB, 50 KA for two motors, copper cable 70mm2 of suitable rating for 100 HP motors from voltage stabilizer to bus bar and bus bar to each MCCB approximately 30 meters in length with proper thimbling and insulation. Complete job include cost of material, labour and to and fro carriage charges.