89/W/EDC-I/SRE/2024-25

Amount

Detail of Work

Safe cartage of PCC poles up to 8.5/11 Mtr. from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends.(Dist.Up to 20 Km.)

Safely cartage of other complete line material ABC cable (Except PCC Poles) from ESC, SRE/ JE store to site of work at various sites including loading, unloading at both ends.( Dist.App. 0 to 20 Km.)

Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 20 km.)

Safe cartage of 11 KV Fuse Set from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 20 km.)

Safe cartage of LT ABC (3x120+1x95+1x16 sq.mm) from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 20 km.)

Erection of single support on PCC poles up to 8.5/11 Mtr Long with complete fitting of all accessories of 11 KV/LT line. complete.

Erection of double Pole on PCC poles up to 8.5/11 Mtr Long with complete fitting with all accessories complete.

Grouting and Fixing of 11 KV stay rods by digging of pits in block of 600X600X300 mm. & with nozzling of stay wire 7/10 SWG and fitting the same on the pole

Concreting of PCC poles 8.5/11 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Laying Lifting stringing & Sagging of ABC Cable size 3x120+x1x95+1x16 sq.mm. including fixing of all type clamps and connector of all accessories.

Safely fixing of 3 Phase Distribution Box properly.

Providing of All type MS Clamp for PCC poles with nuts bolts made of new MS flat iron 50x6 mm.

Safely Installation of Fuse set and connection properly.

Providing and fixing of nuts & bolts of various sizes.

Providing and fixing of LT Piercing Connector 95 sq.mm

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Weasel Conductor for 11KV/LT Line including complete.

Fabrication charge of Channel & Angel.

Constriction of plinth for installation of 250 kv T/F of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick RCC top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall.

Safe installation of 250 KVA T/F on the Plinth with complete fittings including making connections and commissioning.

Wire mesh fencing of 250 KVA T/F size 2.5x2.5x2.5 mt. grouting making frame of MS angle 45x45x6 mm and fixing four no. MS strip size 25x6 mm at equal distance in between the frame and fixing square mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6'x3' with sitakni & Dandala.

Pipe/Water Level Earthing of 250 KVA T/F (1 No body & 1 No. neutral earthing) by boring of 60 Ft deep & fixing of 60 ft. G.I pipe 11/2" Dia (Jindal Class B) and connecting with G.I. Strip of size 40x5 mm and G.I wire at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe

Providing and fixing of Double Circuit Tail less unit 300 Amp in coming circuit connected with copper bus bar of proper ratting for 160/250 KVA T//F in the frame made of MS Angle 45x45x5 mm fitted with GI Nut bolts and fixing the same top of plinth/near ground level as per site requirement.

Providing and fixing of of Crimping Lug for 250 KVA T/F

Laying of LT XLPE cable 1*240 sq.mm / Connecting lead 1x16 sq.mm as per repo specification.

CHAUDHARY CONTRACTOR (BID ID -5381344)

FAGGU RAM & COMPANY (BID ID -5381450)