SPECIAL REPAIR TO BLDG NO ASC-82 AND TSW-05 AT STATIC WKSP EME MHOW UNDER GE (AWC) MHOW

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating steel based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating steel based plain steel sheet 0.50 mm thick of any colour having rensile strength of 550 Mpa as in roof/covering/cladding to wall, fixed with self tapping screws all as specified and as directed at site.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed.

M&L for non skid/mat finish ceramic colour tiles 7 to 8 mm thick (square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles size 300mm x 200mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified cerameic tiles 10mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:4 complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. Note :- Pillar tape shall be measured as supply only under respective item.

Supply only 15 mm dia pillars taps fancy type, cast copper alloy with capston heads, chromium plated screwed down high pressure, screwed for iron pipe complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall (Make as spproved by GE) complete all as specified and directed.

S&F in repairs brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed. Make : Plumber Cat No FLP-0507.

S&F towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats weighing minimum 170 grams complete all as specified and directed.

S&F in repairs 15mm dia bib tap chromioum plated long body handles screwed with wall flange for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china urinal , half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern,flush pipe) complete all as specified and as directed.

S&F in repairs PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specified and directed.

S&F in repairs 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S&F in repairs 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S&F in repairs 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S&F in repairs 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S&F in repairs 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S&F in repairs 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

Taking up or down existing GI tubing and connections, in any position including cleaning and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.

Ditto all as per item No. 24.00 above but 20mm dia.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' (ISI Marked) with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Ditto all as per item No. 26.00 above but 20mm dia.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets of any thickness, including cover fillets complete all as specified and directed.

M&L for false ceiling with GI powder coated frame work and 4mm thick, white pre-premiered and painted self embossed, reinforced designer board conforming IS- 14862 and ISO-8336, duly suspended with ceiling complete all as specified and directed by Engr-in-charge.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in two layers (10 mm thick bottom layer & top layer 5mm thick), mixed with water proofing compound in top layer as per manufacturer instructions, finished even & fair without using extra cement including taking down old plaster complete all as specified and as directed.

Supply only Integral water proofing compound (ISI marked) complete all as specified and as directed.

M&L for rendering 15mm thick plastering in cement mortar (1:6) finished even & smooth without using extra cement including taking down old plaster complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of new wall surfaces complete all as specified and as directed.

M&L for applying 2.80mm to 3.00mm thick of Birla White/ JK white Wall care putty on internal surfaces of new or old wall as per manufacture's instruction including prepartion of surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall complete all as per specified and directed.

M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparation complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surfaces of wall including preparations of surfaces complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilaster and other wall features etc by brooming down or steel wire brushing scrapping down to remove smoke soot, moulds, moss and efflorescence salt and treating oil and greasy spot etc and applying one coat of white wash on the wall complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for reparing of RCC projection, chajjas, roofs, facia, colum etc by necessary preparation i.e scrapping, cutting, chiseling, derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1.5 : 3) using 12.5 mm graded crushed crushed stone aggregate and reinforeced with welded mesh of weight exc 2kg per sqm but n.exc 3kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height including necessary fromwork and shutter complete all as specified.

Demolition of cement concrete (unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give mirror finish over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for machine kota stone 15-16 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provider for complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and fair and making 50mm deep joints at every 3 metre interval and at every corner and filling the joints with bitumen of grade 85/25 and sand mixture 1:3 complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm but not exceeding 4 Sqm each and making good the surface of dismantled area with existing surface complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good the surface of dismantled area with existing surface complete all as specified and directed.

Taking down shutters of any decription exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed.

S&F 2nd class hard wood plain solid, straight chowkhats and frames wrought, framed on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 12.50 mm graded crushed stone aggregate) as in hold fasts filling including necessary use and waste of form work complete all as specified and directed.

M&L for preaparation surfaces of wood and wood based materials and treated with tar to backs of chowkhats etc. area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials , steel and iron work , new or old , of any description and girth, not otherwise described, and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc. area tarred not exceeding 0.1 sqm each with tar or coal tar black paint complete all as specified and directed.

S&F factory made 2nd class hard wood 35 mm thick Plain , framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and directed.

S&F factory made 30 mm thick flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed.

S&F factory made 2nd class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S&F 100 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section complete all as specified and directed.

S&F 150 mm size aluminium handles cast type, anodised ISI marked complete all as specified and directed.

S&F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specifed and directed.

M&L for preparation of new wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coats of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.

M&L for preparation of old wood painted surfaces of any description , not otherwise description, over 10 cm width or grith apply one coat of synthetic enemel paint (ordinary tint) complete all as specifed and directed.

M&L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of red oxide zinc chrome coat complete all as specified and as directed.

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads at any height complete all as specifed and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane complete all as specifed and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in lime or cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel, plain, black sheet 0.80 mm thick in chymney, wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed.

Dismantling of unframed/ framed boarding , any description,including fitting and fixtures fixed in any position with nails complete all as specified and directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws timber frame work as in cupboard , wardrobe etc complete all as specified and directed.

S&F 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive over 12 mm thick plywood as per manufacturer's instructions complete all as directed and specified.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt, ISI marked complete all as specified and directed.

S&F 30 mm width of flaps (when open) continious (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F aluminium handles, cast type anodised 'D' shaped,100mm long ISI marked complete all as specified and directed.

S&F 100 mm length hasp and staple, mild steel, wire type stove enemelled black , including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F steel rolling shutters with out ball bearing as sprcified including top cover, anchoring rod, haps and staple and one shop coat of primer,erected in position as indicated complete push pull or manual type (thickness of lath 1mm) complete all as specified and directed.

S&F harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment complete all as specified and directed.

Taking down carefully copper/alluminium point wiring light, fan, sockets or power includind all fittings and accessories complete and making good disturbed surface of walls and floors etc.

Taking out old defective DB,s MCCB, MCBs, isolators of any type and capacity complete all as specified and directed.

Taking out old unserviceable sub main wiring of any type and size complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FR copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FR copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for the following:-

(a) One light / fan /bell controlled by one, one way switch 5/6 Amps.

(b) One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch.

M&L for point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FR copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FR copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed .

S&F modular metal flush box 3 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular metal flush box 6 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular metal flush box 8 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular metal flush box 12 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular white cover plate with frame 3 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular white cover plate with frame 6 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular white cover plate with frame 8 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular white cover plate with frame 12 module complete all as specified and as directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F in repairs ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed. Make :- Anchor / Havells / Legrand

S&F modular switch 1 way 6 A, 1 module complete all as specified and directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make:- Legrand Mylinc Series / Crabtree Athena Series / Anchor ROMA PLUS

S&F switch piano type multipurposes 5/15 A, complete all as specified and directed. Make:- Legrand / Crabtree / Anchor / Havells

S&F socket flush type multipurposes 5/15 A, complete all as specified and directed. Make:- Legrand / Crabtree / Anchor / Havells

S&F ultra modern recessed mounting luminaire suitable for armstrong /grid ceiling in MS housing with high brightness 36 W 5700K LED light fitting of size 600x600 mm with all accessories complete all as specified and directed. Make:- Havells code No PLAN02X2 PLR36 WLED 857S / WIPRO cat part NoCRCO10RO38HP57GL1 / Bajaj Cat part No BCTBLL36W WH FP

S&F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long with all accessories complete all as specified and directed. Make: Havells cat part No Cat No LUMILINEPLUS BS 20WLED865SPCSS / WIPRO Cat part No D532065 / Bajaj Cat part No BCLSB20WH

S&F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection with all accessories complete all as specified and directed. Make: Havells cat No-ENDURACITY LITEPLA TPLU SSL30WLED757SASYBOPC / Philips / Wipro

S&F MCCB DB wall mounted VTPN with provision of MCCB 3 pole 160 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing 6 way double door and including wall finising complete all as specified and as directed. Make :- L&T Cat No -DBVTL004DD / Legrand / Schneider.

S&F MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified Make :- L&T Cat No -DBSPN008DD / Legrand / Schneider.

S&F MCCB 3 pole 415 V 160 A 50Hz with rupturing capacity 25KA complete all as specified and directed. Make:L&T / Legrand/Schneider.

S&F MCB DP 40 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed. Make:L&T Cat No -BB20400C / Legrand/Schneider.

S&F MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed. Make:L&T Cat No -BB10320C / Legrand / Schneider.

S&F industrial socket with 4 pole MCB 32 Amps, 415 Volts complete all as specified and as directed. Make:L&T / Legrand/Schneider.

S&F sheet metal enclosure with two pin and earth plug with one single pole MCB 20 amps complete all as specified and directed. Make:L&T / Legrand/Schneider.

M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note :- (i) PVC cable of two single core 6 Sqmm and one single core 4 sqmm and one run of PVC conduit shall be measured as one unit length. (iii) Cutting chases for concealed conduit wiring, finishing the surfaces with cement mortar (1:4) and surfaces shall be matched with existing surfaces without any extra cost.

M&L for sub main wiring with four runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 32 mm dia including two run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note :- (i) PVC cable of four single core 6 Sqmm and two single core 4 sqmm and one run of PVC conduit shall be measured as one unit length. (iii) Cutting chases for concealed conduit wiring, finishing the surfaces with cement mortar (1:4) and surfaces shall be matched with existing surfaces without any extra cost.

M&L for sub main wiring with four runs of single core PVC insulated unsheathed cable 1100 volts grade, 10 sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 32 mm dia including two run of PVC insulated unsheathed 6 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note :- (i) PVC cable of four single core 10 Sqmm and two single core 6 sqmm and one run of PVC conduit shall be measured as one unit length. (iii) Cutting chases for concealed conduit wiring, finishing the surfaces with cement mortar (1:4) and surfaces shall be matched with existing surfaces without any extra cost.

S&F wall mounted fan single phase 230 volt, 400 mm sweep including flexible copper cable for electric connections complete all as specified and as directed. Make :- Havells, Model :- Sameera / Bajaj / Usha/CG as approved by GE.

S&F heavy duty exhaust fan 450 mm sweep single phase 230 volt, 900RPM complete all as specified and as directed. Make :- Havells, Model :- Turbo force SP / Bajaj / Usha / CG as approved by GE.

S&F heavy duty exhaust fan 300 mm sweep single phase 230 volt, 900RPM complete all as specified and as directed. Make :- Havells, Model :- Turbo force SP / Bajaj / Usha/CG as approved by GE.

M&L for replacement of earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with TMT 8mm dia nominal reinforcement @ 150 mm centre to centre both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

BHATIA ASSOCIATES

PREMCHAND BHAWANI SAHAI

M/S GARG CONSTRUCTION

Jamna Constructions

M/S Ashish Construction

Chitragupta Construction

m/s bansal construction

KAILASH CHANDRA KHANDELWAL