PROVN OF APPROACH PATH SALUTING BASE WITH FLAG MAST AND SITTING AREA NEAR ADMIN BLOCK AT ND ANDROTH UNDER GE NAVY LAKSHADWEEP

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 depth and getting out in hard / dense soil for foubdation etc. complete all as specified and as directed .

Excavation over areas, n. exc. 1.5m deep and getting out hard / dense soil complete all as specified and as directed .

Rolling and consolidation of formation surfaces in cutting using hand rollers 0.2 to 0.5 tonne complete all as specified and as directed.

Hardcore with broken stone aggregate of gauge n.exc 63mm deposited spread and levelled in layer not exc 15cm thick, watered and rammed to true surface complete all as specified and as directed .

M&L PCC 100 mm thick 1:4:8 type D2 by using 40mm graded aggregate as in subbase of floor complete all as specified and as directed.

M&L PCC 100 mm thick 1:3:6 type C1 by using 20mm graded aggregate as in floors complete all as specified and as directed.

M8L sand cushioning including spreading and levelling complete all as specified and as directed

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and with pigment laid over sand cushion and compacted with mechanical plate vibrator complete all as specified and as directed . Note : Sand cushioning shall be measured and paid separately

M&L cement concrete 1:2:4 type B1 byusing 20 mm graded stone aggregate in coping, kerbs, benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed

M&L PCC 1:4:8 type D2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed.

M&L pre-cast cement concrete block masonry 1:3:6 type C1 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L PCC 1:3:6 type C2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed.

S&F Galvanised stay strand, 7/4mm complete all as specified and as directed.

S&F MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 -W (Gde-E- 250) quality - A complete all as specified and as directed.

Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. 20mm dia of neck and length of bolt exc 15cm but not exc 30cm long complete all as specified and as directed.

M&L Flag post pipe of heavy weight of galvanised pipe comprising of different dia of sizes of pipes including necessary welding, hooks, pulley system for rope fixing base plate complete all as specified and as directed.

Preparation of new or previuosly untreated steel surfaces and applying two coats of epoxy painting over a one coat of epoxy primer of any description over 10cm in width or girth , not otherwise described complete all as specified and as directed.

M&L railing of SS 316L marine grade comprising of different dia of SS Pipes including necessary welding, hooks for chain fixing complete all as specified and as directed. Note: - (i) Thickness of SS Pipe shall not be less than 14 guage for dia morethan 50mm and 16 guage for less than 50mm dia of pipe.. (ii) The SS Grade shall be 316L and Marine grade (iii). The Pipe top shall be closed with SS cap.

M&L chain of SS 316L Marine Grade comprising of not less than 5mm dia, 40mm pitch including necessary welding complete all as specified and as directed.

M&L steel wire rope of 8mm dia with fixing arrangement complete all as specified and directed.

Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow etc for adequate no of coats complete all as specified and as directed

Returning filling in, with excavated soils including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed .

Removing excavated material to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed .

S & F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

S &F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

M&L 20 mm thick machine cut granite tiles (of any type) as in flooring laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L 20 mm thick machine cut granite tiles (of any type) as in vertical surfaces lfixing with adhesive as per manufacturer instructions including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

R.K. Builders (BID ID -3352414)

STANDARD ENGINEERING (BID ID -3359439)