Carrying out Electrical renovation works in the entire offices in the NPKRR Maaligai in TNEB Head Quarters complex, Chennai

Amount

Dismantling, Shifting and stocking in the Suitable location in the ground floor, the Unwanted Electrical installations Viz., Light fittings, Ceiling Fans, MCB DBs, Wires, Conduits, Jinction Boxes and other allied accessories in Electrical, Data and Voice communication system.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated multistrand unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in surface with wall Surface flush mounting type GI modular switch box with cover plate and modular 6A flush type switch , in flush with wall , for open light point / fan point (For Electronic regulator) (4 Points per coil) Make : Wires - Polycab / Finolex / Equivalent. Switches / Sockets : Anchor Roma / Equivalent

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated multistrand unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in surface with wall Surface GI modular switch box with cover plate and modular 6A flush type switch for open PVC light point / fan point (For Electronic regulator) (5 Points per coil) Make : Wires - Polycab / Finolex / Equivalent. Switches / Sockets : Anchor Roma / Equivalent

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated multistrand unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in surface with wall Surface flush mounting type GI modular switch box with cover plate and modular 6A flush type switch , in flush with wall , for light point / fan point in toilets) 6 point/coil Make : Wires - Polycab / Finolex. Switches / Sockets : Anchor Roma / Equivalent

Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in surface with wall Surface mounting type GI modular switch box with cover plate and modular 6A (two way) flush type switch, switch boxes in flush with wall for open staircase light point. Make : Wires - Polycab / Finolex / Equivalent. Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 3 Nos 10 A Multi socket 2 Pin & 3 Pin (Modular type), 1 No - 6/16A 3 Pin Socket (Modular type) with 20 A Modular switch in suitable 12 way modular type metal box with cover in surface with wall and other surfaces. (For computer points) Make : Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 1 No 6/16A 3 Pin Socket (Modular type) with 20 A Modular switch in suitable modular type metal box with cover in surface with wall and other surfaces. (For Power Plug point) Make : Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 2 Nos 10 A Multi socket 2 Pin & 3 Pin (Modular type) wiht seperate, 10 A Modular switch in suitable 12 way modular type metal box with cover in surface with wall and other surfaces. (For computer points) Make : Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 3 Nos 10 A Multi socket 2 Pin & 3 Pin (Modular type) with seperate, 10 A Modular switch in suitable 12 way modular type metal box with cover in surface with wall and other surfaces. (For computer points) Make : Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 4 Nos 10 A Multi socket 2 Pin & 3 Pin (Modular type) with seperate, 10 A Modular switch in suitable 12 way modular type metal box with cover in surface with wall and other surfaces. (For computer points) Make : Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 4 Nos 20 A socket 3 Pin (Modular type) with seperate 20 A Modular switch in suitable 12 way modular type PVC box with cover in surface with wall and other surfaces. Make : Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 1 No 10 A Multi socket 2 Pin & 3 Pin (Modular type) with 1 No 10 A Modular switch in suitable modular type metal box with cover in surface with wall and other surfaces. (For Plug point) Make : Switches / Sockets : Anchor Roma / Equivalent

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earthconnection (For AC Plug) Make : MCBs : Legrend / Hager/ Equivalent

Supply and fixing of 2 No , 10A Douple Pole Modular type MCBs in suitable modular type metal box with cover in surface with wall and other surfaces. (For VRF Indoor Units) Make : MCBs : Legrend / Hager/ Equivalent

Supply and fixing of single box type Single 4' LED Tube light fitting complete with 1 No 20 W, 4', T8, Single side, LED Lamp on TW Round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fittng with Flu.Lamp. Make : LED Tube light : Philips / Crompton / Equivalent

Supply and fixing of Single box type Single 4' LED Tube light fitting complete with 1 No 20 W, 4', T8, Single side, LED Lamp with 0.75 Mtr conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fittng with LED.Lamp. Make : LED Tube light : Philips / Crompton / Equivalent

Supply and fixing of twin box type 4' LED Tube light fitting complete with 2 Nos 20 W, 4', T8, Single side, LED Lamp on TW Round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fittng with LED.Lamp. Make : LED Tube light : Philips / Crompton / Equivalent

Supply and fixing of twin box type 4' LED Tube light fitting complete with 2 Nos 20 W, 4', T8, Single side, LED Lamp with 0.75 Mtr conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fittng with LED.Lamp. Make : LED Tube light : Philips / Crompton / Equivalent

Supply and fixing of LED 36 W 6500K (2' x 2' square type), Cool White recessed false ceiling fitting complete on ceiling with PVC unsheathed leads from terminals to the fitting and with suitable chain link support. Make : Philips / Havells/Equivalent

Supply and fixing of LED 18W 3000K (square type) recessed false ceiling fitting complete on ceiling with PVC unsheathed leads from terminals to the fitting and with suitable chain link support. Make : Philips / Havells/Equivalent

Removing, Cleaning, Repainting with white colour and refixing the Ceiling fan of all sizes in the existing rawl hook, incuding the renewal fixing accessories like fixing clamps, rubber bush, fixing bolt and nuts, worn out capacitor, interconnection wires by 1.0 Sq.mm PVC insulated Multi strand copper wires.etc.,

Supply and fixing of 1200 mm (48") BLDC Motor with Remote 3 Blade, 5 Star rated, Ceiling fan complete with with remote controlled regulator with 0.7 meter down rod on the existing clamp. Make: Havells / Crompton / Equivalent

Supply and fixing of 1200 mm (48") 5 Star Rated AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp. Make: Havells / Crompton / Equivalent.

Supply and fixing of bombay type rawl hook for ceiling fans.

Supply and fixing of 375mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making of the wall Make : Almonard / Havells/ Equivalent

Supply and fixing of 375 mm (15") sweep (Heavy duty) AC Exhaust fan complete without provision of holes in the wall. Make : Almonard / Havells/ Equivalent

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall. Make : Almonard / Havells/ Equivalent

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. Make : Almonard / Havells/ Equivalent

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply, with Modular bell push switch in suitable 1/2 way modular type metal box with cover in surface with wall and other surfaces.

Supply and fixing of recess mounted high perfomence PIR occupancy sensor compact presence detector to provide automatic control for lighting arrangement . It detects the human presence and automatically turns the lights ON and turns OFF when the area is vacated.

Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 1 of 1.0 Sq.mm (14/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 2 of 2.5 Sq.mm (36/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 1 of 1.5 Sq.mm (22/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 2 of 4.0 Sq.mm (56/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade in heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection 1 of 2.5 Sq.mm (36/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 2 of 6.0 Sq.mm (84/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade in heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection 1 of 4.0 Sq.mm (56/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 4 of 4.0 Sq.mm (56/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 1 of 2.5 Sq.mm (36/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 4 of 6.0 Sq.mm (84 / 0.3) PVC insulated multistrand Cu.conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 1 of 4.0 Sq.mm (56/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 4 of 10.0 Sq.mm (140/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 1 of 6.0 Sq.mm (84/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 4 of 16.0 Sq.mm (101/0.45) PVC insulated multistrand Cu.conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 1 of 10.0 Sq.mm (140/0.3) PVC insulated multistrand Cu.conductor of 1100V Grade. Make : Wires - Polycab / Finolex / Equivalent.

Supply and run of 3 Core 6.0 Sq.mm PVC Sheath insulated multistrand Cu.cable of 1100V Grade in Existing Raceways, Flexible hose, PVC Pipes and in all conduits. Make : Cables - Polycab / Finolex / Equivalent.

Supply and run of 3 Core 4.0 Sq.mm PVC Sheath insulated multistrand Cu.cable of 1100V Grade in Existing Raceways, Flexible hose, PVC Pipes and in all conduits. Make : Cables - Polycab / Finolex / Equivalent.

Supply and run of 3 Core 2.5 Sq.mm PVC Sheath insulated multistrand Cu.cable of 1100V Grade in Existing Raceways, Flexible hose, PVC Pipes and in all conduits. Make : Cables - Polycab / Finolex / Equivalent.

Supply and run of 3 Core 1.5 Sq.mm PVC Sheath insulated multistrand Cu.cable of 1100V Grade in Existing Raceways, Flexible hose, PVC Pipes and in all conduits. Make : Cables - Polycab / Finolex / Equivalent.

Supply installation and testing of the company made sheet steel double door type 12 Way Horizontal MCB DB comprising of 1 No 32 A DP MCB as incoming and 10 Nos 6/10 A SP MCB as outgoing with necessary interconnections. (For light &Fan) MCBs and MCB DB Make : Legrend / Hager

Supply installation and testing of the company made sheet steel double door type, Horizontal 3 Phase 6 Way ( 4 Way for Incomer, 18 Way for Out going) Horizontal MCB DB comprising of 1 No 32 A FP MCB as incoming and 18 Nos 6/10 A SP MCB as outgoing with necessary interconnections. . (ForComputer Points) MCBs and MCB DB Make : Legrend / Hager

Supply and fixing of 6 Way 7 segment TPN MCB distribution board with metal / acrylic double door cover with IP 42 protection in sheet steel enclosure with 100A 4 pole MCB as incoming and 3 Nos.40A 30MA DP ELCB as Sub incoming and 24 Nos. 6A to 10A SP MCB as outgoing on wall and making good of the portion with earth connection. (For lighting ) MCBs and MCB DB Make : Legrend / Hager/ Equivalent

Supply and fixing of 12 Way ( For Incoming - 4 Way, For out going - 36 Way) vertical type TPN MCB distribution board with metal / acrylic double door cover with IP 42 protection in sheet steel enclosure with 160A 4 pole MCCB as incoming and 9 Nos, 32 A FP MCB as outgoing on wall and making good of the portion with earth connection. ( For Main power circuit Distribution) MCBs and MCB DB Make : Legrend / Hager / Equivalent MCCBs : L&T /Schneider/ Equivalent

Supply and fixing of 12 Way ( For Incoming - 4 Way, For out going - 36 Way) vertical type TPN MCB distribution board with metal / acrylic double door cover with IP 42 protection in sheet steel enclosure with 160A 4 pole MCCB as incoming and 6 Nos, 32 A FP MCB as outgoing on wall and making good of the portion with earth connection. ( For ACs and other power circuit Distribution) MCBs and MCB DB Make : Legrend / Hager, MCCBs : L&T /Schneider/ Equivalent

Supply and fixing of 100A 4 pole Raising Main Tap off box with MCCB with connection with Multi function meter and with suitable CT coils complete (For lighting)

Supply and fixing of 160A 4 pole Raising Main Tap off box with MCCB with connection with Multi function meter and with suitable CT coils complete.

Supply and Laying of Raceways - Metal/GI - height 38 mm and Width of 300 mm, 3 compartments, with cover.

Supply and Laying of Raceways - Metal/GI - height 38 mm and Width of 150 mm, 1 compartment, with cover.

Supply and Laying of Raceways - Metal/GI - height 38 mm and Width of 50 mm, 1 compartment, with cover.

Supply and Laying of Raceways - Metal/GI - Floor mounting box with cover for direct acess to cables at the intersection of raceways, Supplied completely with base and Stainless steel cover plate (Lid). Size 300 mm x 300 mm of adjustable Height from 50 mm to 70 mm.

Supply and Laying of Raceways - Metal/GI - Floor mounting box with cover for direct acess to cables at the intersection of raceways, Supplied completely with base and Stainless steel cover plate (Lid). Size 150 mm x 150 mm of adjustable Height from 50 mm to 70 mm.

Supply and fixing of GI Hot dip / Powder coated 16 swg Cable tray with GI Metal cover, Tray size of 300 mm width and 50 mm Height, with suitable fixing arrangement, inclusive of all fixing accessories.

Supply and fixing of GI Hot dip / Powder coated 16 swg Cable tray with GI Metal cover, Tray size of 150 mm width and 50 mm Height, with suitable fixing arrangement, inclusive of all fixing accessories.

Supply and fixing of LED 15W 4000K (square type) recessed false ceiling fitting complete on ceiling with PVC unsheathed leads from terminals to the fitting and with suitable chain link support. Make : Philips / Havells/ Equivalent.

Supply and installation of Energy efficiency LED fittings, 32 Watts Light (Square) - Cool White, (600 mm x 600 mm) Square Type Surface mounted aluminium die cast material, suitable for mounting in surface with the ceiling (inclusive of labour, fixing acceceriories, LED lamps etc.) Make : Philips / Havells. / Equivalent.

Supply and installation of Energy efficiency LED fittings, 15 Watts Light (Square) - Cool White, (300 mm x 300 mm) Square Type Surface mounted aluminium die cast material, suitable for mounting in surface with the ceiling (inclusive of labour, fixing acceceriories, LED lamps etc.) Make : Philips/ Havells. / Equivalent.

Supply and installation of Energy efficiency LED Spot light fittings, 9 Watts flush mounted, suitable for mounting in flush with the false ceiling (inclusive of labour, fixing acceceriories, LED lamps etc.) Make : Philips/ Havells. / Equivalent.

Supply and installation of Energy efficiency LED Mini Spot light fittings, 3 Watts flush mounted, suitable for mounting in flush with the false ceiling (inclusive of labour, fixing acceceriories, LED lamps etc.) Make : Philips/ Havells. / Equivalent.

Supply installation and testing of the company made sheet steel double door type 12 Way Horizontal MCB DB comprising of 1 No 32 A 4P MCB as incoming and 8 Nos 6/16 A SP MCB as outgoing with necessary interconnections. MCBs and MCB DB Make : Legrend / Hager/ Equivalent MCCBs : L&T /Schneider/ Equivalent

Supply installation and testing of the company made sheet steel double door type 12 Way Horizontal MCB DB comprising of 1 No 63 A 4P MCB as incoming and 8 Nos 6/16 A SP MCB as outgoing with necessary interconnections. MCBs and MCB DB Make : Legrend / Hager/ Equivalent MCCBs : L&T /Schneider/ Equivalent

Supply installation and testing of the company made sheet steel double door type (8 Way, MCCB + 24 Modules) Vertical TPN Distribution Boards (with MCCB Incomer), comprising of 1 No 250 A 4P MCCB as incoming and 6 Nos 63 A 4P MCB as outgoing with necessary interconnections. MCBs and MCB DB Make : Legrend / Hager/ Equivalent MCCBs : L&T /Schneider/ Equivalent

Supply installation and testing of the company made sheet steel double door type (8 Way, MCCB + 24 Modules) Vertical TPN Distribution Boards (with MCCB Incomer), comprising of 1 No 125 A 4P MCCB as incoming and 24 Nos 6 to 32 A SP MCB as outgoing with necessary interconnections. MCBs and MCB DB Make : Legrend / Hager/ Equivalent MCCBs : L&T /Schneider/ Equivalent

Supply and run of 25 x 6 mm Tinned copper flat with necessary Clamps / Supports on wall / Floor / Ground / Cable Tray for earth connection.

Supply fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150 mm width and 50mm height on wall, celing and all surfaces with Suitable down threader rods to suit the site conditions.

Supply fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height on wall, celing and all surfaces with Suitable down threader rods to suit the site conditions.

Supply and Laying of 4C x 240 Sq.mm LT UG AluminiumArmoured cable of 1100 V Grade in all surfaces with nessary clamping support in all surfaces. Make:Havells, Finolex,Polycab/ Equivalent

Supply and fixing of brass cable gland for 4C x 240 Sq.mm LT UG Aluminium Armoured cable with earth connection.

Supply and providing End termination of 4C x 240 Sq.mm PVC LTUG aluminim armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 4C x 70 Sq.mm LT UG Aluminium Armoured cable with earth connection.

Supply and providing End termination of 4C x 70 Sq.mm PVC LTUG aluminim armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and installation of Mild steel fabricated Panel , Floor / Wall mounted housing of 2 Nos 630 A Four Pole MCCB as Incoming, ON load manual Change over switch, 4 Pole, 800 A, 415 V, 50 Hz, Modular construction, Positive Isolation, Door interlock and Pad Lock facility, in Sheet steel enclosure, with operating handle, Conforming to IS/IEC 60947-3., 24 Nos of 63A Four Pole MCBs for out going, with necessary copper bus bar, Bus bar seperator, Insulation, Metering arrangement for Energy, Voltage and Current, with all necessary interconnection arrangements, mounting arrangements, LED indicators, Measuring meters etc. Make : MCCBs : L&T / Schneider /Havells/ Equivalent MCBs : Legrend / Hager / Equivalent

Supply laying and charging of 4C X 16Sq mm LT XLPE insulated 1.1 kv grade, armored copper conductor cables by clamping on the wall, laying on trays, trenches, ducts and as per the site conditions. (For ODU) Make:Havells, Finolex,Polycab/ Equivalent.

Supply installation and testing of the company made sheet steel double door type Suitable Horizontal MCB DB comprising of 5 Nos 63 A 4P MCB as outgoing with necessary interconnections. MCBs : Legrend / Hager / Equivalent (For VRF Outdoor Units)

Supply and providing of high Voltage Electrical Insulating Rubber Matt of 12 mm thick, ISI Marked, conforming to IS:15652

Supply and laying of 4C x 50 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. Make:Havells, Finolex,Polycab/ Equivalent

Supply and installation of open well submersible pump, Capacity : 15 HP, 3 Phase operated., with pipe size of 65 x 50 MM (Dia), Head range of 46-72 Metres, Impeller: Cast Iron, Motor Body: Cast Iron, Delivery Casing: Cast Iron, Shaft : Stainless Steel. Discharge rate of Minimum of 3.5 LPS @ a Head of 30 Metres. Make and Model : Kirloskar KOS-1575+/Equivalent

Supply and installation of 3 Phase panel board along with Starter for 15 HP open well submersible pump. Make : C&S/ BCH/Equivalent

Supply and Laying of 4.0 Sq.mm 3 Core PVC insulated water proof flat submersible cable. (From submersible pump to the starters) Make:Havells, Finolex, Polycab/ Equivalent

Supply and installation of in-line mixed flow duct fans specifically designed for rigid and flexible ducting offering 2 times the ressure development of conventional axial fans suitable for 100 mm Dia Duct, with air flow not less than 256 Cu.M/Hr. Make : Ventaxia / Equivalent

Supply and clamping of 100 MM dia rigid PVC pipe with 6Kgf with necessary TEE bend and Long Bend as per the requirement of site conditions along with necessary PVC pasting solution, clamp and fixing accessiries.

Supply and fixing of 65mm (2-1/2") GI pipe (Class 'B') of 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable Water Proof PVC box to house 6A control switch, 6A SP MCB (415V) etc with suitable angle iron frame work with door and with lock and key arrangements and with 120 watts LED street light luminare (Complete set with LED Drivers) with 1 metre of 32mm dia GI pipe (Class 'B') complete with necessary clamps on the above post with with 2.5 Sq.mm PVC unsheathed copper flexible wire, with painting of suitable colour, inclusive of materials, interconnection wires, lift, leads, etc., (LED Fittings : Make : Philips / Havells/Equivalent)

Supply and fixing of 65mm (2-1/2") GI pipe (Class 'B') of 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable Water Proof PVC box to house 6A control switch, 6A SP MCB (415V) etc with suitable angle iron frame work with door and with lock and key arrangements and with out LED street light luminares, with 1 metre of 32mm dia GI pipe (Class 'B') complete with necessary clamps on the above post with with 2.5 Sq.mm PVC unsheathed copper flexible wire, with painting of suitable colour, inclusive of materials, interconnection wires, lift, leads, etc., Suitable for mounting 120 watts / 48 watts Out door LED street light Luminare. Light fittings : Havells / Philips / Equivalent

Supply and laying of 4 x 6 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. Make:Havells, Finolex, Polycab/ Equivalent

Supply and clamping of 4 x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. Make:Havells,Finolex,Polycab/ Equivalent

Supply and installation of the street light control unit in sutable PVC Water Proof Out door / Indoor type as per the requirement of site conditions, with lock and key arrangements with 63A 4P MCB as Incomer and terminal block, contactor and analog timer(24Hrs) complete with necessary connection. MCBs & MCB DBs : Legrend / hager / Equivalent.

Supply and Erection of Lightning Arrestor/ conductor made up 150 mm dia copper ball with 5 Nos. Spike Nos 5 length with 1 No. Copper pipe of 1" dia with 2mm thick for a length of 4 feet with bare to be fixed on suitable supporter and supply and fixing of 5 mtr of 2' dia GI pipe and suppoting struture for the spikes lightning arrestor with necessary heavy duty clamping arrangements on top wall of supporter for doom with masonary pedestal to withstand wind pressure.

Supply, Installation, testing and commissioning of test link box for Nos down conductor in order to disconnect the earth termination system to enable measurement of resistance.

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover. (Dedicated Earth for Lightning arrester)

Supply and run of 65 x 10 mm GI . flat with necessary FRB bus insulators at Nos 0.5mt and in level and with suitable MS clamp grouted on wall / terrace with necessary bolt and nuts ensuring complete electrical continuity and with rivet joints fixed at joints for lightning conductor.

Supply and run of 25 x 6mm Al. flat with necessary FRB bus insulators at Nos 0.5mt and in level and with suitable MS clamp grouted on wall / terrace with necessary bolt and nuts ensuring complete electrical continuity and with rivet joints fixed at joints for lightning conductor.

Supply and run of 50 x 10 mm GI. flat for vertical drop with suitable clamping arrangements in terrace to ground in level with suitable BM isolator at Nos 0.5mt interval on suitable MS clamp including scaffolding charges.

Supply and run of 65 x 10 mm GI. flat with suitable (2 1/2") dia PVC pipe on wall near ground level with suitable clamp set.

Supply and run of 25 x 6 mm Al. flat with suitable (2") dia PVC pipe on wall near ground level with suitable clamp set.

Supply and run of 25x3mm tinned copper flat with necessary clamp with screws on wall/ floor for earth connection (Body earthing)

Supply and run of 25 x 6 mm Tinned copper flat with necessary Clamps / Supports on wall / Floor / Ground / Cable Tray for earth connection.

Erection testing and commissioning of earth station comprising of copper plate earth electrode with 25mm x 3mm copper plate arranged to lay along the 3 Mtr length 100mm dia CI pipe from the bottom of the pipe in two sides of CI Pipe, Copper Electrode duly clamped with the CI Pipe, as per IS 3043 latest revision, including providing 100mm dia CI pipe of 3 Mtrs length, bracing of copper plate with CI pipe and all other items as per IS3043 Complete.The earth shall be conslidated and closed with the excavation soil. A champer of size 600 x 600mm shall be constructed and finished floor level with cast iron or RCC slab cover. The scope includes all civil works such as excavation providing masonry work for the electrodes, providing cost iron or RCC slab cover,earth pit powder, Providing charcoal, salt etc., and all other works as may be required to have earth resistance as required for the IS.

Supply and laying of 4C x 70 Sq.mm Aluminium armoured cable in wall / Ceiling surfaces with suitable clamping. Make:Havells, Finolex,Polycab/ Equivalent

Supply and fixing of 12 Way ( For Incoming - 4 Way, For out going - 36 Way) vertical type TPN MCB distribution board with metal / acrylic double door cover with IP 42 protection in sheet steel enclosure with 160A 4 pole MCCB as incoming and 6 Nos, 63 A FP MCB & 3 Nos of 16A SP MCB as outgoing on wall and making good of the portion with earth connection. ( For Lift room) MCB & MCB DBs : Legrend / Hager / Equivalent MCCBs : L&T /Schneider/ Equivalent

Supply and run of 50 mm x 10 mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply, Erection , Testing and commissioning of 26 persons passenger gearless lift with machine room over the final floor for G + 10 Floor provisions as per the specifications. Make : Johnson / Kone/ OTTIS

Supply & Installation, testing and commissioning of 24 HP ( 12 HP + 12 HP) Outdoor units consists of 100% inverter compressors, inverter fan motor with aero-spiral fan blade and, special pre coated heat exchanger against corrosion, safety valves, solenoid valves, receiver, capillary tube, check valve, electronic expansion valve, high pressure switch, low pressure sensor, pressure regulating valve, refrigerant filter, stop valve, accumulator and refnet kits. The EER of VRF system shall be minimum 12.5 at AHRI condition. Rate shall be inclusive of R-410A refrigerant & oil pre charging, vibration isolators, supports, necessary foundation / pedestal works etc.The unit shall be sized to deliver following rated capacities minimum including de-rated capacity due to excess length of refrigeration pipes, different elevation and the ambient temperature of 40 deg C.The details of the calculation sheets shall be submitted along with shop drawing. All Outdoor units shall be supplied along with Anti corrosive protection coating to prevent from chemicals/sea air/effulent water etc. Make : Carrier/ Voltas/LG/Equivalent

Supply,Installation, testing and commissioning of 4 way VRF/VRV Indoor air conditioning units with compact cooling coil,direct driven multi speed fan & motor, high efficient filter, inbuilt microprocessor thermostat, electronic expansion valve, provision of fresh air duct connection, wired PID remote controller, drain pump,refnet joints, necessary ceiling supports & vibration isolators, refrigerant charging, oil charging, control wiring and drain connection, etc.The Indoor unit and refrigerant pipes will be charged with dehydrated air prior to shipment from the factory. The blower shall be dynamicaly balanced and designed for silent operation not exceeding 36 dB(A) at highspeed . Wireless Remote & inbuilt drain pump of 700mm lift to be part of supply. Both refrigerant lines shall be insulated from the outdoor unit to indoor unit. Necessary mounting supports are included.The capacities are as mentioned below: Make : Carrier/ Voltas/LG/ Equivalent

1.0 TR ( 2' X 2') - Compact Cassette

Supply,Installation, testing and commissioning of 2.0 TR VRF/VRV High Wall indoor units with cooling coil,electronic expansion valve and multispeed fan motor,The blower shall be dynamicaly balanced and designed for silent operation. The unit comes with wireless RC. Make : Carrier/ Voltas/LG/Equivalent

Supply, Installation, Testing and Commissioning of HIGH STATIC DUCT TYPE indoor units of 8.0 TR Capacity with copper cooling coil,electronic expansion valve and multispeed fan motor,The blower shall be dynamicaly balanced and designed for silent operation. Minimum External static pressure of the indoor shall be 196 pa. Wireless Remote Included

Central Controller for operating all indoors from a single point location - Touch Screen type controllable upto 256 Indoor units. 7" inch Touch Screen. RS485Communication port for BMS/Internet connectivity

Supply ,installation, testing and commissioning of Indoor Unit REFNET

Supply ,installation, testing and commissioning of Outdoor unit REFNET

Supply and installation of 18G/20G Refrigerant Copper piping insulated with 13/19 mm thick Nitrile Rubber Tubular insulation wrapped with FRP tape. With required GI threaded rod and slotted channel supports. For VRF Units

Supply and installation of PVC Drain pipe with 9mm thick nitrile rubber insulation complete with necessary fittings, bends, supports etc.

32 mm dia

40 mm dia

Supply, laying, testing & commissioning of 3C x 2.5 sq. mm. shielded communication copper cable for the control cabling from indoor to outdoor unit, with required GI threaded rod and slotted channel supports. (For VRF IDU to ODU) Make:Havells, Finolex, Polycab/ Equivalent

Supply of additional Refrigerant Gas R22 / R410 / R410A or Other Gas Suitable for the VRF/VRV for above pipe qty.

Central Controller for operating all indoors from a single point location - Touch Screen type controllable upto 256 Indoor units. 7" inch Touch Screen. RS485Communication port for BMS/Internet connectivity

Ducting works for Hightsatic duct Supply, installation, testing and balancing of Air Distribution System consists of factory fabricated sheet metal ducting complying with IS: 277 and having 120 GSM coating classification. The price shall include the cost of necessary accessories & supports (anchor fasteners and tie-rods, cradles, angle iron supports, GI bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffeners, zinc chromate painted angle iron flanges, chipping and plastering of openings made for duct supports etc., complete as per specification. The rates quoted shall include turning vanes, straightening vanes, splitters, inspection doors probe, inlets with test openings enclosures complete with locking caps, chain, gaskets etc. Ducts wider than 1500 mm shall have MS flanges only. Test pressure 500 Pa , The Minimum Duct Gauge should be of 24 G only. ( Make for GI Sheet :- Jindal / Sail / Equivalent )

Supply & Installation of Aluminium Linear Grill extruded Powder Coated square grille / Dampers with end flanges.

Dismantling the existing the Existing Ductable Indoor/ Out and the MS ducts.

Supply and run of 4 Pair unshielded twisted pair (UTP) LAN (Computer) CAT 6 Cable in Existing Race ways, Hume Pipes, PVC Condutis, Flexible PVC Hoses Etc.,(For Data Communication cables). Make : Molex / D link

Supply and fixing of 2 Nos I/O Socket (RJ 45) Modular type with PVC Modular Box with PVC Modular Face plate. Make : Molex / D link / Equivalent

Supply and run of 4 Pair unshielded twisted pair (UTP) LAN (Computer) CAT 6 Cable in suitable suitable guage MS conduit pipe on wall and ceiling. (For Data Communication cables). Make : Molex / D link / Equivalent

Supply and installation of CAT 6 Patch Cord of 2 Mtr length, preterminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. Make : Molex / D link / Equivalent

Supply and Installation of cat 6e patch pannel 24 port fully loard rack mount type 4 pair unshilded twisted cable termination unit. Make : Molex / D link / Equivalent

Supply and Installation of OFC Single mode 6 core outdoor cable suitable with accessories etc. Make : Molex / D link / Equivalent

Supply and fixing of Rack mount OFC Single mode LIU 12 port OFC pigtails core termination pigtails duplex coupler connecting plate etc.

Supply and Installation of OFC single mode Patch cord 3Mtrs

Supply and fixing of of 100 x 50 mm Size PVC Channel of suitable colour. Make : MK/ Equivalent .

Supply and fixing of of 50 x 50 mm Size PVC Channel of suitable colour. Make : MK/ Equivalent .

Supply and laying of of 50 mm Dia PVC flexible hose.

Supply and Installation of 27U Rack Floor Mount Rack with accessories cooling fan, power supply 5/15amp 6socket with MCB hardware packet suitable cable manager and etc.

Testing commitioning documentation project codination handling Network Rack dressing work accessories materials misc and etc for LAN Network.

Testing commitioning documentation project codination handling accessories materials misc and etc for Voice Cabling network.

Supply and run 1 run of 0.50 mm - 2 Pair PVC insulated high conductivity copper telephone cable in heavy gauge MS conduit pipe on wall and ceiling. (For Communication cables). (For Communication cables). Wires : Finolex / Polycab / Equivalent

Supply and run of 1 run of 0.50 mm - 20 Pair PVC insulated high conductivity copper un armoured telephone cable in suitable suitable guage MS conduit pipe on wall and ceiling (For Communication cables) Wires : Finolex / Polycab / Equivalent

Supply and run of 1 run of 0.50 mm - 2 Pair PVC insulated high conductivity copper telephone cable ,in Existing Race ways, Hume Pipes, PVC Condutis, Flexible PVC Hoses Etc., (For Communication cables). Wires : Finolex / Polycab / Equivalent

Supply and run of 1 run of 0.50 mm - 20 Pair PVC insulated high conductivity copper un armoured telephone cable in in Existing Race ways, Hume Pipes, PVC Condutis, Flexible PVC Hoses Etc.,(For Communication cables) Wires : Finolex / Polycab / Equivalent

Supply and fixing of 10 Pair krone module connector in sheet steel metal enclosure inclusive of cable Crimping charges. Module should be of Make : Krone / TVS.

Supply and fixing of 1 No I/O Socket (RJ 11) Modular type with PVC Modular Box with Modular Face plate. Make : I/O Sockets and Modular Boxes - Anchor Roma / Equivalent.

Supply and clamping of 50 Pair Armoured 0.5mm Jellyfilled Telephone Cable PVC LTUG armoured cable on wall, celing and all surfaces with MS clamps. Wires : Finolex / Polycab / Equivalent.

Supply and fixing of Telephone Instruments. Corded Landline Phone, Ringer Volume Control, LED for Ring Indication, Wall/Desk Mountable, Classic Design, Clear Call Quality, Mute/Pause/Flash/Redial Function, with 1 Mtr Line Chord. Make : ( Beetel, Model B11 / Equivalent).

Supply and fixing of 400 Pair krone module connector in MS sheet steel powder coated enclosure inclusive of jumber cable cable crimping charges. Make : Krone / TVS / Equivalent

Supply and laying of PVC 25mm casing and capping or pipe .

Supply and laying of PVC 50mm casing and capping or pipe .

Supply and laying of PVC 25mm flexible hose.

Supply of 15U Rack with accessories.

Supply and fixing of 50 Pair krone module connector in MS sheet steel powder coated enclosure inclusive of cable crimping charges. Module should be of Make : Krone / TVS.

Supply and fixing of 20 Pair krone module connector in MS sheet steel powder coated enclosure inclusive of cable crimping charges. Module should be of Make : Krone / TVS / Equivalent.

Supply and run of Unarmoured Co-Axial Cable for TV (RG 11) in suitable suitable guage MS conduit pipe on wall and ceiling. (ForCable TV Connection). Make : Finolex/ Polycab/Equivalent

Supply and run of 4 Pair unshielded twisted pair (UTP) LAN (Computer) CAT6A Cable Dual Shielded (SF/UTP) - 10 Gigabit/Sec LAN Network / High Speed Internet Cable, 550MHZ in suitable suitable guage MS conduit pipe on wall and ceiling. (For Data Communication cables). Make : Dlink / Netgear.

FIRE DOOR Supply and fixing of MS powder coated fire door suitable for 2 Hr fire rating with double leaf, Active leaf width 865mm and inactiveleaf width 865mm, 46mm door frame thickness , 100 x 57 x 1.2mm Frame and with two vision panels of size 200 x 300 mm. The thickness of vision glass should be 6mm with 120 min fire rated, and Gasket of 4 X 13mm 120 min. fire rated door shutter of size 1.8 Mtr x 2.4 Mtr and to suit the existing door opening in all the floors. Make : Doorma / Homann/Equivalent

Supply, Installation, Testing & Commissioning of Heavy Class Electric Resistance Welded Mild Steel Pipe manufactured as per IS : 1239 : Part-1 :2004 for pipe size upto 150mm dia and IS : 3589 for pipes greater than 150mm dia with wall thickness of 6 mm. This include hangers (MS Structural supports , Adjustable swivel ring, Clevis hanger, Split ring, Riser clamp, Pipe clamp, universal beam clamps-"C-type", full threaded GI rods, GI nut & Washers, Post-installed anchors etc.) consumables and Painting the above ground pipes with one coat of metal primer and two coat of fire red enamel paint . Pipe Make : Jindal / TATA / Equivalent. Pipes shall be made suitable for threaded joints for pipesup to 50 MM dia, Grooved fittings above 50mm and up to 150 MM Dia, Above 150 mm welded, welded fittings for all dia below the ground level.

150 NB, Heavy Class

100 NB, Heavy Class

80 NB, Heavy Class

65 NB, Heavy Class

50 NB, Heavy Class

40 NB, Heavy Class

32 NB, Heavy Class

25 NB, Heavy Class

Suplly Installation Testing & Commissioning of Threaded & Grooved Fittings. Grooved Fittings Make : Tyco /National/Equivalent ; Threaded Fittings: Make : Realfit/New Pipe Fittings/ Equivalent

Equal Tee, 150NB

90 Deg Threaded Elbow,25NB

Conc. Reducer

Conc. Reducer, 150x100 NB

Conc. Reducer, 100x80 NB

Conc. Reducer, 80x65NB

Conc. Reducer, 65x50 NB

Reducing Threaded Tee

Reducing Tee, 25x25X25NB

Reducing Tee, 32x32X25NB

Reducing Tee, 40x40X25NB

Supplying, Installing, testing and commissioning CI Butterfly valve ( PN 16) steam rising operated type with required flanges, nuts, bolts etc. complete. Make : Audco / Lehry / Equivalent

200mm nominal dia

150 mm nominal dia

100mm nominal dia

80mm nominal dia

50mm nominal dia

Supply, Installation, Testing & Commissioning of Water Flow Switch, with 2 NO & 2 NC Contacts, for suitable Fire Protection Application with necessary accessories, UL listed. 150mm Dia MAKE : Honeywell / System Sensor / Equivalent

Supply, Installation, Commissioning and Testing of Standard response Pendant sprinkler head, UL Listed, 1/2Inch NPT end connection, 68 Deg. Celsius, chrome finish with K factor – K-5.6 (K-80) with all other complete mounting accessories in all type of ceiling, UL Listed FM Approved. MAKE : TYCO / Equivalent

Supply, Installation, Testing & Commissioning of MS Powder coated Rosette plate for fixing pendent sprinkler in false ceiling area . MAKE : Fabricated

Supply, Installation, Testing & Commissioning of Dial type pressure guage (150mm) with necessary nipple & other fittings. Make : H.Guru / Equivalent

Supply, Installation, Testing and Commissioning of brass ball valves with threaded or flanged ends featuring a bottom-loaded blowout proof stem, thrust washer, and adjustable stem packing gland, stem packing nut, cast iron ball, adapter and steel handle with necessary accessories., 25mm DIA MAKE : ZOLOTO / RB / Equivalent

Supply, Installtion, Testing and Commissioning of 25NB Air release valve with required accessories like 25mm ball valve , unions ,couplings etc. MAKE : ZOLOTO / Equivalent

Supply, Installation, Testing & Commissioning of 1500mm stainless steel unbraided flexible hose pipe with bracket L & S, O-Ring, square bar and all mounting accessories. UL Listed ,FM Approved MAKE : TYCO / Equivalent

Installation, Testing & Commissioning of150mm dia sprinkler alarm gong valve with necessary fittings. Make : HD/ Equivalent

Supply, Installation, Testing and Commissioning of 6 W Wall Speakers with line matching transformers complete in all respect. necessary with fittings. Make : Bosch, Moel : LBD3902 / Ahuja / Equivalent

System Controller Console complete with Microprocessor based 10 Zone Call Station, Stem Type Microphone (to be integarted with fire alarm system) Make : Bosch, Model : LBB1990 PLENA / Ahuja / Equivalent

Rack Mounted 480 W Power Amplifier as per specifications. Make : Bosch - LBD1938/00 / Ahuja / Equivalent

PUBLIC ADDRESS SYSTEM CABLE SITC of Fire Retardant Low Smoke (FRLS),BS Approval, 2 Core x 1.5 sqmm size Annealed Tinned Copper multi strands, PE Insulation, Inner PVS Sheathed, Outer PVC FRLS, 1100 Voltage rating, GI Armoured cable with terminal legs, clamping accessories. Distance between each clamp's is 610mmm (3 feet).Outer sheath of cable shall be in BLUE colour. Make : Polycab / Varsha / Unifine / Equivalent

Addressable Intelligent Networkable 1-5 loop Fire Alarm Panel with battery back up, power supply, facility to add minimum 2 more loop card with necessary netwrok card, RS485 connectivity for panel to panel connection and interface card to connect a repeater panel and all hardware & software as per specification. Make : Honeywell - Morelay -ZX5SE - 721-001-301 / Equivalent

SITC of UL listed and FM approved Intelligent Addressable Multi sensor detectors with Photo electric sensor and Thermal sensors with advance technology and false alarm resistance along with standard base. The detector shall have fecility to mount in different comprehensive environment. Thermal has multiple level of setting (Above False ceiling) . It includes necessary Backbox , gland ,screw for fixing in true ceiling. Make & Model: Honeywell - Morelay - HM/PTSE / Equivalent

SITC of UL listed and FM approved Intelligent Addressable Intelligent Thermal Detector with advance technology and false alarm resistance along with standard base. The detector shall have fecility to mount in different comprehensive environment. Thermal has multiple level of setting (Above False ceiling) . It includes necessary Backbox , gland ,screw for fixing in true ceiling. Make & Model: Honeywell - Morelay - HM-FHSE / Equivalent

SITC of Addressable Manual pull station. Make : Honeywell - HM-MCP-GLASS / Equivalent

Supply and installation of Intelligent Wall Mount Sounder Strobe. Make : Honeywell - WSS-PR N05/ Equivalent

SITC of Addressable Monitor modules for Sprinkler flow switch, flow switch,Panic bar and other input deivces. Make : Honey well - Model :MI/DMMI / Equivalent

FAULT ISOLATOR MODULE SITC of "loop Isolator Module” UL Listed. Isolator module shall be used to monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected. FIM’s are used one for every 20 Detector’s & Devises. The module should be supported independently of their attachment to wirings using necessary mounting accessories with GI Junction Box with cable gland, clamps/brass screws etc for mounting at True ceiling. Make : Honey well - Model :MI-DISO / Equivalent

FIRE ALARM CABLE SITC of Fire Retardant Low Smoke (FRLS),BS Approval, 2 Core x 1.5 sqmm size Annealed Tinned Copper multi strands, PE Insulation, Inner PVS Sheathed, Outer PVC FRLS, 1100 Voltage rating, GI Armoured cable with terminal legs, clamping accessories. Distance between each clamp's is 610mmm (3 feet).Outer sheath of cable shall be in RED colour. Cable outer jacket should be in Red colour. 2Runs of FRLS cable quantity included for Panel integration. The vendor shall include the cost of removing armour outer jacket wherever cable drop Make : Polycab / Varsha / Unifine / Equivalent

RESPONSE INDICATOR SITC of "Response Indicator” with back box for false ceiling and false floor area where detectors are installed above the false ceiling. It shall be visual indicating type and shall start flashing when the detector in that particular area/ zone has been activated due to smoke or fire. The indicator to be connected with individual detector installed at place where they are not easily visible. The scope include supply of necessary mounting accessories and GI back box. The rooms are closed with lock and key the RI to be placed outsided of the rooms. Make : Agni/ Equivalent

POWER SUPPLY UNIT SITC of 24V 5A Power supply unit to power hooter cum strobe modules. The vendor shall specify the capacity and quantity as required based on their respective technical requirements. The Power supply unit should be supported independently of their attachment to wirings using necessary wall & column mounting support, clamps/brass screws, etc. Make : C Systems / Equivalent

MULTISENSOR DETECTOR WITH STANDARD BASE (True Ceiling) SITC of UL listed and FM approved Intelligent Addressable Multi sensor detectors with Photo electric sensor and Thermal sensors with advance technology and false alarm resistance along with standard base. The detector shall have fecility to mount in different comprehensive environment. Thermal has multiple level of setting (Above False ceiling) . It includes necessary Backbox , gland ,screw for fixing in true ceiling. Make : Siemens OH-921 / Equivalent

HOOTER WITH STROBE LIGHT SITC of UL listed Hooter with Strobe light, Hooter shall be a minimum sound level is either 65 dB (A) or 5 dB (A) above any other noise likely to persist for a period longer than 30 s, with necessary mounting accessories, GI rough-in box (for wall / true Ceiling and False ceiling mounting). Make : Siemens ZH-MC-R / Equivalent

MANUAL CALL POINT SITC of UL listed & FM approved Single action Manual Pull Station with (Pull Down option) semi Flush. The scope include the supply of suitable GI rough-in box with GI back plate to mount MCP in wall / column with necessory mounting accessories with cable gland, clamps/brass screws etc. The vendor is responsible to co-ordinate with Civil vendor for fixing the rough-in boxes and providing reset keys for all MCP. Make & Model: Siemens XMS-S / Equivalent

FAULT ISOLATOR MODULE SITC of "Fault Isolator Module” UL Listed. Isolator module shall be used to monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected. FIM’s are used one for every 20 Detector’s & Devises. The module should be supported independently of their attachment to wirings using necessary mounting accessories with GI 4 X 4 Junction Box with cable gland, clamps/brass screws etc for mounting at True ceiling. Make & Model : Siemens XTRI-M / Equivalent

CONTROL MODULE SITC of "Addressable Control Relay Modules”, UL Listed with necessary interposing relays. Control module shall be used for emergency control functions including shutting down Fire dampers in AHU's, tripping of AHU's, DDC Panel Integration, FACP integration, PA System Interface & HVAC Incomer power trip. The module should be supported independently of their attachment to wirings using necessary mounting accessories with GI 4 X 4 Junction Box with cable gland, clamps/brass screws etc for mounting at True ceiling. Make & Model : Siemens XTRI-R / Equivalent

INPUT MODULE SITC of "Addressable Input Modules” UL Listed, Inputs modules shall be used for Monitoring the Power supply units, Flow switch, FACP Interface, Fire watter tank level status, pump status & Supervisory switch. The module should be supported independently of their attachment to wirings using necessary mounting accessories with GI 4 X 4 Junction Box with cable gland, clamps/brass screws etc for mounting at True ceiling. Make & Model : Siemens XTRI-M / Equivalent

POWER SUPPLY UNIT SITC of 24V 5A Power supply unit to power hooter cum strobe modules. The vendor shall specify the capacity and quantity as required based on their respective technical requirements. The Power supply unit should be supported independently of their attachment to wirings using necessary wall & column mounting support, clamps/brass screws, etc. Make : C Systems / Equivalent

Supply, Installation, Testing and Commissioning of Wafer type lever operated Butterfly valve with flanged end connections, C.I disc, S.S shaft, EPDM seat and with necessary accessories, flanges and bolt & nuts. The valves to be manufactured as per standard IS 13095 : 1991. The valve shall be rated for PN1.6 pressure rating. The size of valve is 150mm dia . MAKE : AUDCO / LEHRY

Supplying, installing, testing and commissioning of G.I Pipes, Class "C"., confirming to IS 1239, with specials such as Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings. (Suction) Make : Jindal / TATA / Equivalent

250mm nominal dia

100mm nominal dia

Supplying, installing, testing and commissioning of Heavy grade MS Pipes of Class "C"., confirming to IS :1239 part - I with butt welded specials confirming to IS:1239 part - II, such as Tees, elbows, check nuts, unions, flanges, nipples etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, including pipes travelling under ground etc, as per the site requiremements for fire pump delivery. Make : Jindal / TATA / Equivalent

300mm nominal dia

200mm nominal dia

150mm nominal dia

100mm nominal dia

80mm nominal dia

50mm nominal dia

25mm nominal dia

Exhuast pipe for Diesel engine of with mineral wool insulation with aluminum sheet.- M.S. 'B' class pipe of 100 mm dia. Make : Jindal / TATA / Equivalent

Supplying, installing, testing and commissioning of C.I. Non-return Valve type with required flanges, nuts, bolts and gaskets etc. complete. Make : Audco / Lehry / Equivalent

200 mm nominal dia

80 mm nominal dia

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. Make : Audco / Lehry / Equivalent

25mm dia.

15mm dia

Supplying, installing, testing and commissioning of C.I. Flanged Foot Valve with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete.(PN 16) Make : Audco / Lehry / Equivalent

Supply, Installation, Testing & Commissioning of pressure switch

Supply, Installation, Testing & Commissioning of Dial type pressure guage (100mm Industrial type) with necessary nipple & other fittings. Make : H.Guru / Equivalent

Supply, fixing, testing and commissioning of M.S. material Air Vessel Tank of size 300 mm dia x 1000 mm long x 6 mm thickness with necessary inlet & outlet flange, 20 NB brass air release valve, 25 NB drain valve with supporting leg and etc., complete as per detailed specification.

Supply, fixing, Priming tank PVC 1000 Lts. Capacity complete with 25 nb float valve, level indicator, Drain valve, etc. Make :Tank : PVC tank Sintex.

Supplying, Installing, testing and commissioning CI Butterfly Valve ( PN 16) steam rising operated type with required flanges, nuts, bolts etc. Complete of 100mm nominal dia. Make : Audco / Lehry / Equivalent

Supplying, installing, testing and commissioning of Double headed SS hydrant valve as per IS: 5290 (Type A). The valves should be complete with hand wheels, quick coupling connections, springs and blank caps.

Supplying, installing, testing and commissioning of 1 lengths of 15 M long, 63mm dia RRL hose with couplings and Hoses shall be rolled & hug tosuitable M.S. structural support fixed inside the Fire duct wall.RRL Hose as per IS: 636.

Supplying, installing, testing and commissioning of 1 no. SS branch pipe with nozzle, As per IS: 903

Supplying, installing, testing and commissioning of M.S. cabinet - 18 Gauge with powder coated finish of 750mm x 600mm x 250mm in size and mounted on structural support.

Supply ,installation, testing and commissioning of Fire Hose Reel (as per ISI) wall mounted, swinging type18 SWG MS sheet, fitted with 19 mm dia x 36 M long, high pressure hose with 5 mm outlet nozzle with shut off valve includes 25 NB Ball valve.

Supplying, fabricating, structural steel supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete with painting for pipe support.

Supply, Erection, Testing and Commissioning of above ground piping carried out of MS class C Heavy duty pipe as per IS : 1239 for pipes up to 150mm NB and as per IS : 3589 with a wall thickness of 6.35mm for pipes 200mm NB and above together with fittings, valves and accessories as under : pipe grade shall be Fe330.Work will include all structural supports, painting for the above ground piping with one coat of primer and two coat of enamel paint of approved colour. Work will include cleaning of pipe, degreasing, etc. Make : Jindal / TATA / Equivalent

100mm nominal dia

80mm nominal dia

Supply, Erection, Testing and Commissioning of underground buried piping 1239 carried out of MS class "C" Heavy duty piping for pipes up to 150mm NB and as per IS : 3589 with a wall thickness of 6.35mm for pipes 200mm NB and above together with fittings, valves and accessories as under : Make : Jindal / TATA / Equivalent

200mm nominal dia

150mm nominal dia

100mm nominal dia

80mm nominal dia

For UNDER GROUND protective wrapping(4 mm thickness - anti corrosive treatment with 4 mm thick polymer corrosion resistant tape as per IS 10221, overlap shall be 15mm minimum around buried MS pipes) and coating for MS pipe as per IS : Rates will include Excavation, sand cushioning for 100mm & Back filling and consolidation.

200mm nominal dia

150mm nominal dia

Supplying, Installing, testing and commissioning CI Butterfly Valve (PN 16) steam rising operated type with required flanges, nuts, bolts etc. complete. Make : Audco / Lehry / Equivalent

150mm nominal dia

100mm nominal dia

80mm nominal dia

Construction of Valve chamber Size of 1000 x 1000 x1200mm outer dimension and to be required. internal dimension as under, upto 1.2 Mtr depth with brick masonry in cement mortor 1:5, with thickness of masonry 225mm, 1:3:6 cement concrete foundation 150mm thick over 150mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface & finished with floating coat of neat cement. Fixing of 600*600 including precasting concrete cover/ C.I. manhole heavy duty cover and frame including painting of the frame & cover .The work shall include all necessary excavation and back filling.

Supplying, installing and commissioning of fire brigade inlet inlet connection of 4 way with 4 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 150 mm dia. Pipe manifold and connected to wet riser main. Qouted rate shall be included with Butterfly valve, check valve and M.S. cabinet of suitable size with mounting supports etc. complete.

Supplying, installing and commissioning of fire brigade inlet inletconnection of 2 way with 2 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia. Pipe manifold and connected to fire water sump for tank filling by external source.. Qouted rate shall be included with Butterfly valve, check valve and M.S. cabinet of suitable size with mounting supports etc. complete.

Supplying, installing, testing and commissioning of Single headed SS hydrant valve as per IS: 5290 (Type A). The valves should be complete with hand wheels, quick coupling connections, springs and blank caps.

Supplying, installing, testing and commissioning of1 lengths of 15 M long, 63mm dia RRL hose with couplings and Hoses shall be rolled & hug tosuitable M.S. structural support fixed inside the Fire duct wall.RRL Hose as per IS: 636.

Supplying, installing, testing and commissioning of 1 no. SS branch pipe with nozzle, As per IS: 903

Supplying, installing, testing and commissioning of M.S. cabinet - 18 Gauge with powder coated finish of 750mm x 600mm x 250mm in size and mounted on structural support.

Supply and fixing of ABC 6 kg Extinguisher. Make : Safex / Usha / Equivalent

Supply and fixing of Co 2 4.5 kg. Make : Safex / Usha / Equivalent

Fire bucket with stand (2 bucket with stand )

Supply, Installation & Testing of IBMS workstation. PC workstation with Minimum: Corei7 -6700, Win 10 x 64bit OS Profesional, 16GB RAM, 2X 2Gb Graphics with 2 DVI/Display Port, 1TB HDD, 1Gigabit NIC). If the vendor PC requirement is more than what is specified here, the vendor shall quote the configuration that meets their requirement.

Supply, Installation, Testing & Commissioning of IBMS licence software for Integrated Building Management System true Enterprise version Software for Monitoring & controlling DDCs, all the utilities, third party integration equipments as mentioned in the I-O list that shall meet all the requirements given in the IO list, Technical Specifications & also shall include all the operation logic of the entire HVAC System as per HVAC Consultants/Client design.The software shall be Server / Client based with minimum of 3 user licences with all other mounting accessories complete as required. Auto dial feature to report alarms & reports ( Include all necessary hardware & Software components). If Vendor requirement of IO points license is greater than specified here then it has to be included based on Soft integration & Pseudo IO points. Include Web Monitoring via workstations. Basic Reporting for Energy Meters. Minimum - 1500 Points License(Reference IO summary - For Hardware & Third Party Integration points). The system should be integerated with the FAS, CCTV, ACCESS Control system.

Supply,Installation,Testing and Commissioning of BMS Integration unit for interfacing the DDC Controllers

DDC 1 - for Electrical system

DDC-2- for Water Pumps and Water Distribution system

DDC - 3 for STP / Other system

Supply, Installation, Testing & Commissioning of a third party integration unit for Energy Meter-35 No, UPS-3 Nos

Supply, installation, testing and commissioning of 8 port layer 2 switch with 10/100/1000 POE Commercial Managed Switches with 2 SFP Ports, IP multicast snooping and data-driven IGMP support ,Industry standard Network protocols like IEEE 802.3 Full complaint, Energy Efficient Ethernet. Shall have standards like UL / CSA / CE Mark, FCC Class A, FCC Class B.IEC Certification for Vibration, Shock & Drop.Minimum 3 Years Replaceable Warranty.

Cabling and Containment: Cabling for instrument, controls, valves to DDCs and communication cabling from DDC to central equipment complete with earthing, supports etc complete. Laid on Surface / On Cable Trays. All Cables shall be ferruled and tagged, and shall use lugs for termination at both ends. 2 Core x 1 sq mm Screened with drain wire, UnArmoured Cable for control cabling. Make : Polycab / Finolex / Equivalent

4 Core x 1 sq mm Screened with drain wire, UnArmoured Cable for control cabling. Make : Polycab / Finolex / Equivalent

2 Core x 1 sq mm Unscreened UnArmoured Cable. Make : Polycab / Finolex / Equivalent

4 Core x 1 sq mm Unscreened UnArmoured Cable. Make : Polycab / Finolex / Equivalent

3 Core x 1.5 sq mm Unscreened UnArmoured Cable For Power. Make : Polycab / Finolex / Equivalent

Supply & Laying of Cat-6 cable, Indoor,F/UTP Cable, 4 Pair 23 AWG Solid bare copper,Verified to ANSI - TIA /EIA, ISO / IEC, laid on Surface with PVC Conduits, or GI Saddle- Spacers , or in cable trays, or in GI Conduits as per site requirements, with required terminations as required with Cable tie`s & Tags.

25mm MS Conduits B class with GI Saddle & Spacers, flexible MS extensions, back boxes and gang boxes, junction boxes with elemex terminals etc., complete as required to fulfill the desired objective of security cabling

Supply, Installation, Testing and Commisioning of CAT 6 CABLE and PVC Conduit with necessary Fitting items.

Supply and installation of HDMI Patch Cable of 1.5 Mtr length, preterminated with end terminations and sockets.

Termination charges for CAT-6 Cable including chages for RJ45 cable end connector, numbering ferules and crimping and connection charges.

Supply and fixing of 250 Watts Dual Channel Amplifier. Make : Ahuja., Model: ZXA-500DP / Equivalent

Supply and fixing of 15 watts ceiling speaker. Make : Bosch Model : LCIPC15G6 / Equivalent

Supply and fixing of 12 Channel input mixer with phantom power supply. Make : Studio Master. Model : Aqua14 / Equivalent

Supply and fixing of Dual Cordless mic. Make : Studio Master Model : XR80HH / Equivalent

Supply and fixing of Cordless lapel with head mic. Make : Studio Master. Model : XR20L + XRHM1BL / Equivalent

Supply and fixing of Wired hand Mic . Make : Studio Master. Model : SM400XLR / Equivalent

Supply and fixing of Wired hand Mic . Make : Studio Master. Model : FLEX3 / Equivalent

Supply and fixing of Goose neck spring with stem. Make : Ahuja / Equivalent

Supply and fixing of Small mic stand. Make : AHUJA Model : ATS5 / Equivalent

Supply and fixing of M.S.Powder coated Audio rack with Lock& Key.

Supply and fixing of 40/76, 2 core Speaker wire, with PVC Pipe and all accessories.

Supply and fixing of 14/76, ATC 2 Core Shielded Mic cable with PVC Pipe and all accessories.

Supply and fixing of XLR Connector with 1 No P38 Socket & Socket Box

Supply and fixing of 6 Meter Audio Patch Cable

Supply and fixing of USB Player / recorder. Make : Ahuja Model: ADP30R / Equivalent

Fabricating and supply of Acrylic Podium Size : W 2’ x D 1 ½’ x H 4’, with Clear colour an with Clear sticker logo in front of the Podium.

Supply and fixing of Interconnecting cables, XLR Connectors, Jacks & accessories

Dias Table: Fabricating and supply of wooden mini table, of size (Width)1200 mm x (Breath) 600 x (Height) 750 mm, with 18/19 mm thick Glass top. (For placing Mics and accessories in the stage)

Projector: Supply, Installation, testing and commissioning of Projector 1280 Full HD with 5,000 lumens colour/white brightness Manual lens shift Up to ±50% vertical, ±20% horizontal Virtually maintenance-free for optical engine life Make & Model : Sony VPL series/ Equivalent

Projector Screen: Supply, Installation, testing and commissioning of Motorized Screen Size: 12' x 7' or nearest standard size in 16:9 aspect ration High gain matt white fabric With 4 in1 Remote Control (1-IR/1-RF/1-Wall plate & Up/Stop/Down switches on receiver box.) (Inclusive of Ceiling Mounting Kit to a maximum of 2-6 feet) Make : Liberty / Equivalent

Supply and installation of JBL 8128 Ceiling Speaker (Driver power capacity 25W) Transformer Taps 70 V/100W, 6W, 3W, 1.5W Frequency range (-10db) 60 Hz-18KHz) etc., complete complying with standard specification as directed by the departmental officer.

Supply and installation of CSMA 280 Audio Mixer amplifier (4-8 inputs, 1 to 2 amplifiers output channels, power output 4- ohm 80W7Ov/100v-80w)etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of conference microphone CS3 BU etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of conference microphone CS3 CU 30 CE + CK31 etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of conference microphone CS3 DU 30 CE + CK31 etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of WMS 40 Mini2 vocal set wireless handheld microphone etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of WMS 40 Mini presenterer set wireless microphone etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of Audio Signal Cable in Mtrs. etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of Speaker Cable 2.5 Sq.mm in Mtrs. etc., complete complying with standard specification as directed by the departmental officer.

Supply and Installation of XLR Male and Female Connector etc., complete complying with standard specification as directed by the departmental officer.

Commissioning and Testing the systems etc., complete complying with standard specification as directed by the departmental officer

Supply and installation of Audio Signal Cable in 10 Mtrs.etc., complete complying with standard specification as directed by the departmental officer

Supply and installation of D5S Microphones etc., complete complying with standard specification as directed by the departmental officer

Providing and fixing conference room table to the specified size and design, but in general the table top shall be made of 19mm thick BWR plywood (Two layer at edges)with adequate supports in criss- cross manner . Supports should be spaced in such a manner that adequate leg space should be available.The table top and all exposed surfaces including support structure shall be fixed with approved shade of 3.5mm thick veneer.The table top surface duly finished with melamine finish and other surfaces of veneer shall be finished with melamine matt polish, All internal (hidden) surfaces shall be of sealer finish. Rate shall be inclusive of teak wood edge moulding beadings finished melamine finish matching to the veneer finish, cable raceway with openable doors and necessary hardwares including marking provision for POP- up boxes (all internal surfaces of POP up boxes shall be laminated) etc.., complete.

Furnitures

Supply and fixing of Heavy Duty Metal Frame chair with Arms as directed by the engineer at site including the cost of all lead , lift, labour, T&P etc complete. (For Auditorium & Conference Hall at 10th floor)

Supply and fixing of Slime type Dining table of size 4 feet x 2 1/2 feet with with Glass top including four Numbers of wooden cushion chair.

Supply and fixing of Oval type Dining table of szie 5 feet x 3 feet with Glass top including four Numbers of wooden cushion chair.

Supply and fixing of Closed AMD Wood Wardrobe Bureau with Coat stand of size 6 feet x 2 1/2 feet .

Supply and fixing of Rolling chairs, with steel hand rails, cushion arrangements in back and seat, including hydraulic suspension arrangements.

Supply and fixing of conference room chair for Appathurai Hall as directed by the engineer at site including the cost of all lead , lift, labour, T&P etc complete

Suplly and fixing of 4 Star Inverter Direct-Cool Single Door Refrigerator of Minimum of 192 litres capacity, with base stand, Additional PVC stand for mounting. Make : Samsung / LG / Equivalent

Manufacturing, Supply and fixing of metal fire proof door,Hinged, with panic bar, Door frame with 1.5 mm Stainless steel sheet, leaf with 1.0 mm Stainles sheet 80-100mm, Mortise lock with profile cylinder, Panic Bar; lever handle, Filled with Rock-wool, Honey Comb.

Supply and erection of 30 m high mast floodlight system with its accessories including high mast, galvanized lantern carriage arrangement suitable for 20 Nos of luminaires symmetrically & its control gear boxes, Inclusive of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, Civil escavation works, Concrete pedestal works, Lift, lead, tranportation etc.,

Supply and erection of Automatic Lifting System for raising and lowering the floodlights for maintenance, with 6mm Dia Stainless tell rope trailing Cable, Connecor, Integral tool motor, Manual handle, Junction box., Inclusive of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, Civil escavation works, Concrete pedestal works, Lift, lead, tranportation etc.,

Supply and installation of flood light type 400 Watt High Intensity LED Light - 52,000 Lumens - 120-277V AC - High Mast Lighting

Supply and installation of LED type Single Dome aviation obstruction light.

Supply of outdoor stand mounted feeder pillar with 32A TPN MCB Incomer, Single dial time switch, 25A TP Contactor for the automatic switching of luminaries, power tool control with 2 Nos 9A contactors and raise lower push button, incoming 35 Sq.mm and outgoing 16 & 25 Sq.mm.

Supply and erection of 30 m Flag mast shaft in three sections, Suitable for 50m/Sec wind speed, with head frame, winch bracket, carriage suitable, etc, Inclusive of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, Civil escavation works, Concrete pedestal works, Lift, lead, tranportation etc.,

Supply and erection of raising and lowering system compising double drum winch, with 6mm Dia Stainless tell rope, trailing Cable, Connecor, Integral tool motor, Manual handle, Junction box., Inclusive of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, Civil escavation works, Concrete pedestal works, Lift, lead, tranportation etc.,

Supply and installation of LED type Single Dome aviation obstruction light.

Supply of outdoor stand mounted feeder pillar with 32A TPN MCB Incomer, Single dial time switch, 25A TP Contactor for the automatic switching of luminaries, power tool control with 2 Nos 9A contactors and raise lower push button, incoming 35 Sq.mm and outgoing 16 & 25 Sq.mm.

Supply and laying of 11KV 3 x 120 Sq.mm cross linked poly Ethylene (XLPE) cable armoured XLPE HT UG cable in the trench, PVC pipes, Hume pipes, Cable trays, clamping on wall / ceiling etc.

Supply and making of of heat shrinkable (HS) type , Indoor type 11 KV 3 x 120 Sq.mm cable termination kit

Shifting charges for 5 Panel RMU from rear side of NPKRR Maaligai to the steel structure to be fabricated and erected in top of the Fire Pump water tank ( Inclusive of Crane hire charges, Labour charges for dismantling the DG set and erecting in the new location)

Supply, installation testing and commissioning of 1250A 3 Pole MDO Entelliguard SL ACB (Draw out) with microprocessor based release (OL, SC, EF) over load current protection from 50 – 100 %, short circuit protection from 1.5 to 12 x Ir, ground fault protection from 0.2 to 1 x In, fron mounted snap fit electrical accessories class II, Front Facia, No deviation upto 50 DegOC, Icu=Ics=Icw+1Sec, Digital display of current and trip history, current metering, by retrofitting in the existing MV Power panel in the Indoor SS .

Supply and fabrication of 75 mm x 12 mm Copper busbar with necessary insulations etc

Filling and compacting with brick jelly cement concrete with CM 1:4, to the required height and width and gradient using 20mm brick jelly to mount the 5 Panel RMU to suit the site conditions. The rate includes the cost of all materials, labour, lead, lift, transporting, compaction etc., complete and as per the direction of the Engineer in-charge.

Earth work excavation in all kinds of soils with an intial lead of 10m and lift of 2m. The rate includes the cost of labour, T&P etc., complete.

Providing PCC 1:4:8, using 20mm HBS, to work in any floor the rate includes the cost of all materials, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge.

Providing RCC with compressive strenght M30 , using 12-20mm HBS, the rate includes the cost of all materials, Plasticiser, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge.

Supplying, providing, fabrication, laying and postioning of RTS rods for the reinforcement to all floor levels. The rate includes cost of all materials, labour, lead, lift, transportation, cutting, bending, tying with binding wire, etc., complete and as per the direction of the Engineer incharge.

Providing Brickwork in CM 1:5 using II cl bricks 230X115X75mm. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.

Plastering in cement motar 1:4, 12mm tk over the wall surface. The rate includes the cost of all materials, labour, lead, lift labour, scaffolding etc., complete.

Flooring in screed concrete with PCC 1:2:4 using 12mm HBGS, 50mm tk including the cost of all materials, labour, lead lift, finishing etc., complete and as per the direction of the Engineer incharge.

Supplying and fixing of flush door with teak wood frame of size 100X75mm and shutter using 35mm tk solid core with commercial ply on both sides with teak wood lipping alround, with top portion fixed with 5mm tk plain float glass at top with required aldrop, tower bolts, Mortice lock (Godrej or equivalent), door stopper. The rate includes the cost of all materials, labour, lead, lift etc., complete and as per the dirction of the Engineer incharge.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colur) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. 5mm thick frosted glass should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Engineer before use on work.

Painting two coats of plastic interior Emulsion over one coat of primer after through scrapping of wall surface. The rate includes the cost of all materials, labour, lead, lift, scaffolding etc., complete.

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.

Signage printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.25cm height letters in red with white back ground. The size of the board shall be 10" x 12" and shall be fixed at the height of 2 mts. from finished floor near Manual call points. Complete all as specified and directed by Engineer in charge.

Floor indentification signage ( ie, GROUND FLOOR, FIRST FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 5 cm with contrasting colour from back ground.Size shall be 4" x 18". Complete all as specified and directed by Engineer in charge.

Fire Exit signage ( ie, "Exit Dual Side-Right Arrow Ceiling Mount") above the door of each stair enclosure on every floor, indicating the direction of exit in case of fire emergency, lettering size shall be 5 cm with contrasting colour from back ground.Size shall be 6" x 12". Complete all as specified and directed by Engineer in charge.

Fire Exit signage ( ie, "Exit Dual Side-Left Arrow Ceiling Mount") above the door of each stair enclosure on every floor, indicating the direction of exit in case of fire emergency, lettering size shall be 5 cm with contrasting colour from back ground.Size shall be 6" x 12". Complete all as specified and directed by Engineer in charge.

Fire Exit signage ( ie, "Exit Single Side-Down Arrow Wall Mount") above the door of each stair enclosure on every floor, indicating the direction of exit in case of fire emergency, lettering size shall be 5 cm with contrasting colour from back ground.Size shall be 6" x 12". Complete all as specified and directed by Engineer in charge.

Floor equipment signage (ie, MCP.) at each stair enclosure on every device, lettering size shall be 5 cm with contrasting colour from back ground.Size shall be 4" x 18".

Providing and fixing in position the signages " FIRE ORDER" it should contain the matters on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of 2' x 3'. Complete all as specified and directed by Engineer in charge.

Supply and installation of 98" LED Display along with mounting accessories. Make : Samsung/Panosonic/LG Model : QB98T / Equivalent

Supply and installation of 65" Display along with mounting accessories. Make : Samsung/Panosonic/LG Model : QB65B / Equivalent

Supply and installation of 65" Interactive Display along with mounting accessories. Make : Samsung/Panosonic/LG Model : WM65R / Equivalent

Supply and installation of 55" Display along with mounting accessories. Make : Samsung/Panosonic/LG Model : QB55B / Equivalent

Fabricating and supply of wooden table suitable for mounting 32" Inch Confidence display.

Supply and Installation of 300Mbps Wireless N Ceiling Mount Access Point – Supports Passive PoE, Free PoE Injector, Long Range Coverage, Secure Guest Network, Centralized Management along with power adopter. Make : TP-Link / Equivalent

Supply and installation of Wireless Access Point - WiFi 6 Dual-Band AX1800 Speed | Up to 250 Client Devices | 1 x 2.5G Ethernet LAN Port | 802.11ax | Insight Remote Management | PoE+, or Optional Power Adapter. Make : Netgear / WAX610 withWAX610-100EUS / Equivalent

Supply and installation of 4X4 -HDMI Switcher. Make : ATEN, Model : ATEN VM0404HA / Equivalent.

Supply and installation of 4:1 Auto Swither. Make : ATEN, Model : VS481B / Equivalent.

Supply and installation of 4K HDMI Repeater with Audio Embedder and De-Embedder. Make : ATEN, Model : VS882 / Equivalent.

Supply and installation of HDMI HDBase T.Transmitter + Receiver 4K. Make : ATEN, Model : VE801 / Equivalent.

Supply and installation of Full HD 1080p with 60 frames per second, 360 times variable zoom ratio (20x zoom) along with the mounting accessories. Make : Logitec / Lumens, Model : VC-A61P / Equivalent.

Supply and installation of Full HD 1080p with 60 frames per second, 360 times variable zoom ratio (12x zoom) along with the mounting accessories. Make : Logitec / Lumens, Model : A51B / Equivalent.

Supply and installation of Table Microphone , Mute Button/ MIC Base /LED. Make: AKG, Model : PCC130SW / Equivalent.

Supply and installation of 15 Mic 4 Line in Audio DSP with AEC.

Supply and installation of Ceiling Speakers. Make: JBL, Model : 14C/T / Equivalent.

Supply and installation of 8 Channel Amplifier. Make : Crown / Equivalent, Model : CT8150 / Equivalent

Supply and installation of Wireless HDD MIC. Make : Shure / Equivalent, Model : BLX24/SM58 / Equivalent

Supply and installation of Antena & cable

Supply and installation of Antena Power distribution system. Make : Shure / Equivalent, Model : UA844 / Equivalent

Supply and installation of Control System. Make : CRESTRON/ATEN, Model : CP3/VK1100K2 / Equivalent

Supply and installation of Wireless Touch Panel control for the AV controls. Make: iPad / Equivalent

Supply and installation of iPad Doc - Table Top Doc.

Supply and installation of Crestron /Aton Client software for Ipad. Make : Crestron/ATEN, Model : TBA / Equivalent.

Supply and installation of USB Capture card for Bridge Audio /Video. Make : Cypress, Model : CUSB-V605H

Supply and installation of Cable Pass-Through Plate Cable Cubby / Manager, with Power sockets. Make : Best Net / Equivalent

Supply and installation of Ultra Flexible High Speed HDMI Cables - 2.0 meter length. Make : EIS, Model EC-HDMI-1.8, Equivalent

Supply and installation of HDMI to HDMI cable of 5 Meter length. Make : EIS, Model EC-HDMI-5, Equivalent

Supply and installation of HDMI to HDMI cable of 15 Meter length. Make : EIS, Model EC-HDMI-15, Equivalent

Supply and installation of USB, 3.0 Extender cable of 15 Meter length. Make : ATEN / UE3315A / Equivalent

Supply and laying of 2 core Braided shielded - 20 AWG Audio MIC Cable. Make: EIS / Equivalent.

Supply and installation of Mic Female Connector,

Supply and installation of 32RU Equipment AV 800X 800 rack with Rack Fans, Rack Tray, Castor wheels and Power distribution strip. Make: Netrack / MRS / Equvalent

Supply and laying of 2C x 1.0 Sq.mm PVC insulated copper cable in suitable PVC pipes with all accessories in surface with wall / ceiling for ceiling Speakers. Make: EIS / Equvalent

Supply and laying of CAT-6 UTP cable in suitable PVC Pipe in surface with wall/ Ceiling with PVC accessories. Make : Cable : Molex / Equivalent.

Supply and laying of CAT-6A UTP cable in suitable PVC Pipe in surface with wall/ Ceiling with PVC accessories. Make : Cable : Molex / Equivalent.

Providing leased line connectivity with 10 MPBS capacity, with two year subscrition charges. One Line from BSNL and Another with Private providers Like Airtel / Equivalent

Supply, Installation, testing and commissioning of 5KVA UPS, along with necessary batteries, Mounting stands, interconnection from UPS to Battery, Power supply cable from UPS to UPS DB, Incoming power cable from main power Point.

Supply and installation of 55" 4K, Smart UTV along with mounting accessories. Make : Samsung/Panosonic/LG Model : 55UP7500PTZ / Equivalent

Supply and installation of 32" 4K, Smart UTV along with mounting accessories. Make : Samsung/Panosonic/LG Model, 32LM563BPTC / Equivalent

Supply, Installation of DTH connection for television with with set of box. This includes Setup box, HDMI Cable fom Setup box to TV, Subsription charges for 2 Years. Make : Airtel Digital TV / Equivalent

Supply and fixing of Telephone Instruments. Basic Model with ring volume control, Tone / Pulse mode operation, Caller ID, Speaker Phone, with conference call enabled, with 1 Mtr Line Chord. Make : BEETEL, Make : M88.

Supply and installation of intelligent and informative terminal Digital Phone. Make : Coral/ Iris KT 24 / Equivalent

Training & documentation with two Year 24X7 support with product replacement (OEM Time line), Includes Audio/control/ Documentation/Training, Programing for Biamp/Crestron/Lightware and any other programming and technical support for commissioning the Audio & Video &conferencing equipments.

GST for bidders within TamilNadu Note : Bidders within Tamil Nadu shall enter values separately for SGST and CGST and shall enter the value as "Zero" for IGST.

GST for bidders outside TamilNadu Note: Bidders outside Tamil Nadu shall enter value only for IGST and shall enter the value as "Zero" for SGST and CGST .

Ramalingam Construction Company Pvt Ltd