Proposed construction of Multipurpose hall in Kottaiyadi Street , in ward No 15 Tirunelveli Zone

Amount

Earth work excavating and depositing on bank with an intial lead of 10m & intial lift of 2m in sand, slit or other loose soil, wet sand or slit not under water, light black cotton soil sandy loam and ordinary soil including excavated earth as standard specification SS 20 B including refilling charges etc complete., complying with standard specification

Cement concrete of mix 1:4:8 (one cement, four sand and eight aggreate) using 40mm ISS HBG metal from approved quarry including all cost and conveneyance of materials to site and all labour charges etc., complying with standard specification.

Collection , supply and filling of red gravel from approved quarry for filling for foundation and beasement including cost and conveyance of all materials etc., complete complying with standard specification

Providing steel centering for sides and soffits of cement concrete works including necessary strutting arrangements with strutting for plain surfaces in foundation and basement for RCC grade beams , column footings , columns , plinth beams , staircase , with all cost and conveyance of materials and labor charges etc., complete complying with standard specification

WITHOUT PROPS

COLUMN FOOTING, GRADE BEAM AND PLINTH BEAM

WITH PROPS

RCC COLUMN AND SUNSHADE

LINTEL, BEAM AND SLAB

Reinforced cement concrete 1 : 11/2 : 3 ( one cement, one & a half sand and three jelly ) using 20m ISS HBG metal from aproved quarry and all cost of materials for all RCC works with all cost and conveneyance of materials and labour charges etc., complete complying with standard specification

FOUNDATION AND BASEMENT

GROUND FLOOR

Supplying fabricating and placing in position of R.T.S rods including cutting, bending, straightening of rods and tying the reinforcement with necessary binding wire including all cost and conveneyance of materials to site and all labour cost etc., complete complying with standard specification

Brick work in Cement Mortar 1:5 Mix using Fly Ash Bricks of size 230 x 110 x 75mm from approved quarry including cost and and conveyance of materials to site and all labour charges etc., complete complying with standard specification

FOUNDATION AND BASEMENT

GROUND FLOOR

Fabricating, supply and fixing in position of MS doors, Windows and Ventilators with single or double leaf using MS angle as outer frame, shutter frame and intermediate stiffner covered with M.S. sheet with necessary hinges, tower bolts, aldrop and hold fast complete with one coat of red oxide primer including all cost of materials and labor charges for fixing in position and conveyance cost etc., complete complying with standard specification

furnitures and accessories like rubber beading, PVC felt, L angle, Aluminium hinges , Aluminium door stopper - 1 no., screw, plug etc., labour charges for fabrication, fixing and for dismantling floor or R.C.C or masonry structures and redoing the same to the original conditions cost of electric power etc., all the aluminium section shall be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1668 / 1962 the anodised film thickness of not less than 15 microns. The rate is inclusive of all materials labour charges, cost of transportion, loading, unloading and all other incidential charges etc.,

Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in two track in all floors having bottom track section as 62 x 37 @ 1.218 Kg/m and side & top section as 62 x 31.5 mm @ 0.788 Kg/m for frame and bottom & top section as 40 x 18 mm @ 0.38 Kg/m & side vertical section as 40 x 18mm @ 0.38Kg/m & interlocking vertical section as 40 x 18mm @ 0.632 Kg/m for shutter. All the two shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading. Aluminium clips, rubber beading,handle and fixing 4mm thick clear sheet glass including all required for fabrication etc., complete.Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to

Special ceiling plastering with cement mortar 1 : 3 mix , 10mm thick with all cost and conveyance of materials and labour charges etc., complete complying with standard specification

Plastering with cement mortar 1:5mix 12mm thick with all cost and conveyance of materials and all labour charges etc., complete complying with standard specification

Paving the floor with Vetrified tiles of size 600mm x 600mm x 8mm in cement mortar 1:3, 20mm thick with all cost and conveneyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using at the rate of 0.40kg/sq m including finishing the joint neatly and pointing flush with tile surface etc complete complying with standard specification.

Weathering course concrete using best quality broken brick jelly of size 20mm with uniform guage in pure slacked lime in the proportion of brick jelly to slacked lime being 32 : 12.5 laid in a single layer and consolidated using wooden batters of approved pattern keeping the surface constantly wet by sprinkling lime jaggery water etc., complete complying with standard specification

Terrace flooring with one course or pressed tiles of size 20cm x 20cm x 2cm laid in cm 1:3 mix mixed with crude oil 10% by weight of cement and pointed with same oiled mortor including all cost of materials and labour charges etc complete complying with standard specification

Painting two coats with ready mixed enamel paint of approved colour and quality including priming coat over new iron works etc.,complete complying with standard specification

Painting the walls two coats with approved interior and exterior emulsion of first quality over cement plasterd wall surfaces, celling and other new or old surfaces over one coat of primer using cement paint primer including cleaning the surface and painting with primer , etc. complete complying with standard specification. ( The colour and shade of the emulsion shall be got approved by corporation officers before use on works)

Supplying & fixing PVC rain water down fall pipe of the following dia with necessary T.W.plugs, shoes, bends, other clamps, screws nails etc., complete complying with standard specification. The pipe is to be fixed by means of MS "U" clamps at the centre of pipes to be fixed.

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator) ( SD 23 )

Supply and fixing of 32A DP MCB ISOLATOR including all cost of materials and hire charges for tools and plants, labour charges for fixing in position etc. complete as directed by corporation officers

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. ( SD 110 )

Supply and fixing of 20W 4' LED light fitting complete with round blocks on wall or ceiling with pvc unsheathed copper leads from terminals to the fitting

Wiring with 2 x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. ( SD 38 )

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 65)

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 No's 32A fuse unit (500V) 32A neutral link and earth link (1"x1/8"copper flat) on TW plank of size 600mmx450mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20PVC insulated copper wire from EB meter to fuse unit (SD 127)

Supply and fixing of 3 phase 32A aerial fuse unit 3Nos. (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps (SD 132)

Supply and fixing of copper wire for earth connection including all cost of materials and labour cost etc., complete (LMR)

Earthing as per the ISI specificati on with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 15A 3 pin flush type non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed power plug point ( SD 40 )

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm GI pipe (Class "B") suitably bent at both ends with necessary angle upright and end supports for main ( SD 70 )

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make] ( SD 140 )

Supply and run of 2 of 6sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour for open wiring ( SD 58 )

Supply, delivery and fixing of the following components including all cost of materials & conveyance cost and labour charges for fixing in position etc. complete as directed by Corporation officers

Supply and fixing of water drain pipe line (1” PVC Pipe) - M-2010

Labour charges for removing the damaged manglore roof tiles including all cost of labour and hire charges for tools & plants etc. comlplete

Carpenter - I Class - L-0016

Carpenter - II Class - L-0063

Dismantling the existing damaged brick work in cement mortar including all cost of labour charges and tools & plants etc., complete. W-0015

Manufacturing, supplying and fixing of Stainless Steel hand rails for staircase using 50mm dia 304L Grade Stainless steelpipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete - M-0651

Lettering and painting of size 10' x 3' including all cost of materials and labour charges and conveyance cost etc., complete as directed by Corporation officers - LMR

Providing black granite tablet stone of size 4' x 2' , 18mm thick and engraving the Tamil / English letters as directed by Corporation officers -LMR

Providing MS Hospital name board of size 8' x 4' using 1" x 1/4" MS angle as outer frame with necessary stiffner to support the MS sheet and lettering the school name in Tamil as directed by officers and providing 4.00m length "B" class 3" pipe to support the name board and erecting the same using PCC including all cost of materials and labour charges and conveyance cost etc., complete as directed by Corporation officers - LMR

KRISHNAN MANOKARAN (BID ID -1374792)

RAMAMOORTHY (BID ID -1374803)