DAY TO DAY MAINTENCE AND REWIRING OF CERTAIN BLDG AND REPAIR/ MAINTENANCE OF PUMPS AND MOTORS INCLUDING ALLIED WORKS AT EBS AND BHOJRAJ AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Point wiring with 1.5 sqmm(22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in existing PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified.

All as per Sl item No 2.00 above but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.

All as per Sl item No 2.00 above but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per item No.2.00 but 2.5 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLS copper earth wire for switch socket combination 3 pin 15 amps on independent board Complete.

Point wiring with 1.5 sqmm(22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic surface conduit/ casing & caping 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified.

All as per Sl item No 6.00 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.

All as per Sl item No 6.00 above but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per item No.6.00 but 2.5 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLS copper earth wire for switch socket combination 3 pin 15 amps on independent board Complete.

S&F Socket out let flush type 3/6 pin suitable for 15 Amp plug top Multipurpose 230 V all as specified & directed.

Switch Piano flush type 15 amp single Pole one way 230 V all as specified & directed.

S&F Socket out let flush type 5 pin suitable for 5 Amp plug top 230 V all as specified & directed.

S&F Switch Piano flush type 5 amp single Pole one way 230 V all as specified & directed.

S&F Lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.

S & F LED 9W , 3 Star Lamp,6500 K Colour Temp complete as specified and directed.

S&F Ceiling rose surface bakelite surface 65 x 50mm, 3 terminals all as specified & directed.

S & F electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts single door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve MCB SPN 32 AMP, in the MCBDB complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve MCB SP and 5 to 32 AMP, in the MCBDB complete all as specified and directed.

S & F sheet metal enclosure MCB DB TPN 8 way with 200 amps rated bus bar 415 volts Double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply And fixing MCB TPN 63 Amps, 415 V, 10 KA complete all as specified and directed..

M & L in replacement of UNSV sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 4 sq mm copper cable multi stranded conductor drawn through and including ISI marked PVC conduit 20 mm dia complete, fixed on walls/ceilings with PVC saddles as per IS including of 4 sqmm dia FRLS PVC Copper cable green colour as earth wire connected to earth all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.

Attending of complaints pertaining to faulty/Non-functional/working state of all accessories pertain to internal Electrification / through telephone or in person round the clock on detailment by MES Service centre deploying electrician and locating and rectifying the fault from Elect Meter/DB onwards in respect of Sub Main /Point wiring including fixtures for power and light, socket, fan, bell point including security light fitted in bldgs etc complete and carrying out repairs to the extent of disconnection and dismantling of faulty wires, battens, conduits, boxes, Main switches, MCB, DBs, and other E/M faults pertaining to particulars equipment including providing wire upto 1.00 mtr and insulatiion tape required for the rectification of defect and refixing of existing dismantling serviceable articles. all as directed .(At EBS & BHOJRAJ) Note:-(i) Contractor shall provide the complain slip and containing 100 pages in triplicate properly binded and complaint book as per sample on requirement basis complete all as specified and directed.

Supply only Rigid non-metallic PVC conduit/Casing caping exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Supply only socket out let 15A, 5 pin, multipurpose type complete all as specified and directed.

Supply only piano type switch 15 Amps, S.P. one way flush type complete all as specified and directed.

Supply only piano type switch 5 Amps, S.P. one way flush type complete all as specified and directed.

Supply only socket outlet 3 Pin 5 Amps Multi purpose Piano type, flush type complete all as specified and directed. .

Supply only bell push flush type 5 amps complete all as specified and directed.

Supply only of sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB of 20 Amp rating 240 volts complete all as specified and directed..

Supply only MCB TPN 63 Amps, 415 V, 10 KA complete all as specified and directed..

Supply only MCB SPN 20 -32 Amps, 415 V, 10 KA ( B series ) complete all as specified and directed..

Supplyonly MCB SP 06 - 32 Amps, 415 V, 10 KA ( B series ) complete all as specified and directed..

Supply only sheet laminated 3 mm thick including cutting required size drilling holes for incorporating switch, socket, regulators etc. complete all as specified and directed..

Supply only of capacitor 2.5 to 3.15 mfd as per existing capacity of 240V A.C complete all as specified and directed..

Supply only lamp holder insulated body with back plate suitable for batten fittings complete all as specified and directed. .

Supply only fan regulator electronic dimmers,240V flush type suitable for 48”/56” sweep ceiling fans complete all as specified and directed.

Supply only fan regulator Electronic step type suitable for 48/56” ceiling fan complete all as specified and directed.

Supply only ceiling rose surface bakelite three terminals size 65 x 50 mm complete all as specified and directed.

Supply and laying or fixing or passing through pipe,1100 volts grade heavy duty cable with PVC insulated aluminium solid/stranded conductor served with an inner sheathing of PVC tape armoured ,overall PVC sheathed 10 sqmm 2 core nominal cross section complete all as specified and directed

Supply and fixing LED lights fitting 1x 18/20W, 220V,AC Decorative ultra slim square profile box type LED lighting fixture with extruded polycarbonate,environmental freindly,energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete.

All as per Sl item No 44.00 above herein before but capacity 60 W complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make-Havells , Bajaj CG Syska or equivalent as approved by accepting officer.Make-Havell's, Bajaj CG,Wipro, Osram,Syska or equivalent as approved by accepting officer.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.with suitable GI tubing including all accessories all as specified and directed. of of Make- Havells , Bajaj CG Syska or equivalent as approved by accepting officer.

Material & Labour for GI pipe light grade 40 mm, suitable for bracket of street light fitting 1.2 mtrs long including MS flat iron clamp 25X3mm thick with nut bolt and washers for fixing in Pole and wall complete all as specified and directed.

Supply only 1.5 sqmm FR-LSH PVC Insulated, Unsheathed,1100 volt conforming to IS 694 complete as specified and directed.

Taking out pump from its existing foundation by cutting nuts & bolts , blocking the outlet & inlet system by proper plate, decoupling and transportation of pump or part there of to contractors workshop and back to site , re- fixing , aligning , connecting inlet and outlet pipe after repair and replacement of following parts (as per requirement) suitable for centrifugal pump of capacity 40 HP of any make /model . Note:-(i)Replacement of any other parts such as Impellar, ring, water deflector,gasket Pump shaft bush, gland plate etc.shall be measured and paid for separately, rate for fixing spare shall deemed to be included in the quoted rate. (ii)Labour for opening up of pump and machinery work and other minor parts required to make the pump functional shall deemed to be included in the item complete all as specified and directed.

Supply Only Impleller Cast iron as per existing stage (1/2stage) with key all as specified and directed.

Supply Only Ring (Entire) all as specified and directed.

Supply Only Lantern ring all as specified and directed.

Supply Only Water deflector DE & NDE all as specified and directed.

Supply Only Gasket between lower and upper casing all as specified and directed.

Supply Only Pump shaft bush DE & NDE all as specified and directed.

Supply Only Gland for DE NDE stuffing box all as specified and directed.

Supply Only Gland plate all as specified and directed.

Supply Only Shaft sleeve all as specified and directed.

M&L for Remetalling of shaft including lathe work all as specified and directed.

Taking out pump from its existing foundation by cutting nuts & bolts , blocking the outlet & inlet system by proper plate, decoupling and transportation of pump or part there of to contractors workshop and back to site , re- fixing , aligning , connecting inlet and outlet pipe after repair and replacement of following parts (as per requirement) suitable for centrifugal pump of capacity 12.5 to 15 HP of any make /model . Note:-(i)Replacement of any other parts such as Impellar, ring, water defector,gasket Pump shaft bush, gland plate etc.shall be measured and paid for separately, rate for fixing spare shall deemed to be included in the quoted rate. (ii)Labour for opening up of pump and machinery work and other minor parts required to make the pump functional shall deemed to be included in the item.

Supply Only Impleller Cast iron as per existing stage (1/2stage) with key all as specified and directed.

Supply Only Ring (Entire) all as specified and directed.

Supply Only Lantern ring all as specified and directed.

Supply Only Gasket between lower and upper casing all as specified and directed.

Supply Only Pump shaft bush all as specified and directed.

Supply Only Gland for stuffing box all as specified and directed.

Supply Only Gland plate all as specified and directed.

Supply Only Shaft sleeve all as specified and directed.

Taking out pump from its existing foundation by cutting nuts & bolts , blocking the outlet & inlet system by proper plate, decoupling and transportation of pump or part there of to contractors workshop and back to site , re- fixing , aligning , connecting inlet and outlet pipe after repair and replacement of following parts (as per requirement) suitable for centrifugal pump of capacity 1 to 5 HP of any make /model . Note:-(i) Replacement of any other parts such asImpellar, ring, water defector,gasket Pump shaft bush, gland plate etc.shall be measured and paid for separately, rate for fixing spare shall deemed to be included in the quoted rate. (ii)Labour for opening up of pump and machinery work and other minor parts required to make the pump functional shall deemed to be included in the quoted rate.

Supply Only Impleller Cast iron with key all as specified and directed.

Supply Only Ring (Entire) all as specified and directed.

Supply Only Gasket between lower and upper casing all as specified and directed.

Supply Only Pump shaft bush all as specified and directed.

Supply Only Gland for stuffing box all as specified and directed.

Supply Only Gland plate all as specified and directed. Note for Srl item 50 to 76 :- (a) Minor replacement of any parts & repair to housing, proper aligning the pump with motor is deemed to be included in the quoted rate.(b) Pumps shall be repaired & reinstalled with in 10 days from the date of handing over of motors.

Disconnecting/ dismantling / decoupling from foundation and taking up of unserviceable defective motor from installation /pump houses and Refixing serviceable electric motor (received after repair or from the spare motors available in store) to the foundation , coupling with pump compressor/gear box etc all as required at site, connecting electrically, aligning properly and testing after installation to the entire satisfaction of electric motor 3 phase 400/415/440 V 50 C/S of capacity 1.0 HP to 5 HP etc complete all as specified and as directed.

All as per serial item No 77.00 but of capacity 12.5 HP to 15 HP all as specified and directed.

All as per serial item No 77.00 but of capacity 40 HP all as specified and directed.

M&L for repair to unserviceable motor electric 40 HP, 3 phase 400/415/440V 50 C/S of any make comprising the following work complete : - (i) Transportation from installation/ store to authorised workshop for repair and back. (ii) Strip opening of motor and taking out burnt winding, cleaning the slot internally as well as externally motor, stator and bearings etc complete all as specified and as directed by Engr - in - charge. (iii) M&L for rewinding the motor with super enameled copper winding wire of existing gauge complete including insulating material such as insulated paper, glass sleeve , cotton type, varnish etc and replacement of defective bearing, greasing, oiling etc complete all as specified and as directed .

All as per item No 80 but capacity of motor 12.5 HP to 15HP all as specified and directed.

All as per item No 80 but capacity of motor 5 HP all as specified and directed.

All as per item No 80 but capacity of motor 3 HP all as specified and directed.

All as per item No 80 but capacity of motor 2 HP all as specified and directed.

All as per item No 80 but capacity of motor 1 HP. Note for Srl item 80 to 85 : (i) Replacement of any other parts such as fan blade, connecting plate, ball bearing and repair to housing shall be measured and paid for separately. (iii) Motors shall be repaired & re-installed with in 10 days from the date of handing over of motors.

Dismantling of 40 HP motor electric from foundation and pump opening the same and only servicing of motor by cleaning internally and externally , varnishing of stator, greasing of bearing , fittings alignment , connecting electrically,re-fixing and testing etc complete all as specified and as directed. Note :The job shall be done at plant only.

All as per serial item No 86 but of capacity 12.5 HP to 15 HP complete all as specified and as directed.

All as per item No 86 but 1 HP to 5 HP complete all as specified and as directed.

Supply and fixing connection plate of 40 HP 3 phase electric motor complete all as specified and as directed

All as per serial item No 90 but for capacity 12.5 HP to 15 HP electric motor complete all as specified and directed

M&L for replacement flexible cushion tyre coupling complete with flange and including lathe work for making bore of suitable dia for 15 Hp to 40HP Centrifugal pump sets as per existing complete all as specified and directed .

M&L for replacement flexible cushion tyre coupling complete with flange and including lathe work for making bore of suitable dia for 1 Hp to 5 HP Centrifugal pump sets as per existing complete all as specified and directed .

S&F in replacement flexible cushion tyre coupling only suitable for 15 to 40 HP Centrifugal pump sets as per existing complete all as specified and directed .

S&F in replacement flexible cushion tyre coupling only suitable for 1 to 5 HP Centrifugal pump sets as per existing complete all as specified and directed .

Supply and fixing Star type coupling only suitable for 10/12.5 HP motor complete all specified and directed.

M&L for repair to bearing housing including re-mettaling / reboring complete of motor 40 HP etc complete all as specified and as directed.

M&L for repair to bearing housing including re-mettaling / reboring complete of motor 12.5 HP etc complete all as specified and as directed.

Supply and fixing fan blade assembly complete suitable for motor 40HP etc complete all as specified and as directed.

All as per item No 98 but of capacity 12.5 HP to 15 HPall as specified and directed.

All as per item No 98 but motor 1 to 5 HP all as specified and directed.

S&F in replacement of contactor ML-4 for starter complete all as specified and directed.

S&F in replacement of contactor of capacity MU-2, AC 3 rating ,25A,415 Volt complete all as specified and directed.

S&F in replacement of contactor ML-1.5 for starter complete all as specified and directed.

S&F in replacement of Contactor FP MK-1 for starter as required at site complete all as specified and as directed

S&F in replacement of Contactor MNX 25 Amp complete all as specified and as directed

S&F in replacement of Contactor MNX 32Amp complete all as specified and as directed

S&F in repairs thermal over load relay range 9-15A , complete all as specified and as directed .

S&F in repairs thermal over load relay range 14-23A , complete all as specified and as directed .

S&F in repairs thermal over load relay range 30-50A , complete all as specified and as directed .

S&F in repairs Electronic timer ET-100,9 to 30sec, 415V,50Hz complete all as specified and as directed .

S&F in repairs push button adoptor with element and fixing with screw complete all as specified and as directed.

S&F in repairs electronic timer suitable for star delta starter with opertaing range 3 to 30 sec complete all as specified and as directed.

M& L for in replacement of rotary switch 25 Amps complete all as specified and as directed.

M&L for in replacement of wiring with using single core copper cable of size 2.5 Sqmm PVC insulated 1100 volt grade in existing conduit complete all as specified and as directed

M&L for in replacement of wiring with using single core copper cable of size 4.0 Sqmm PVC insulated 1100 volt grade in existing conduit complete all as specified and as directed

M&L for in replacement of wiring with using single core copper cable of size 6.0 Sqmm PVC insulated 1100 volt grade in existing conduit complete all as specified and as directed

M&L for in replacement of wiring with using single core copper cable of size 10.0 Sqmm PVC insulated 1100 volt grade in existing conduit complete all as specified and as directed

M&L for replacement of single phase preventor 380-440V +/-20% with trip setting and trip time delay model VSP -02 suitable for motor/pumpset protection complete all as specified and as directed.

M&L for rewinding of openwell submersible /Submersible motor of 15 HPwith proper size & quality of super enameled submersible copper wire complete including materials such as insulation paper, sleeves, cotton tape, varnishing etc. including Opening up & taking out winding cleaning motor internally & externally complete comprising the following works complete:- (i) Pumping out water from Raw water tank before taking out pump and before re-lowering of pump other repairs. (ii) Taking out pump along with Col pipe , transportation from plant to contractor’s workshop and back to site after repair & re-lowering in the tank along with Col pipe & testing complete .iii) Reassembling & testing on load. (iv) Replacement of bush. Note :- All T & P required for lifting and lowering of pump for repair will be provided by the contractor and rate deemed to be included in quoted rates.

All as per serial item No 119 but of capacity 7.5HP submersible pumpset complete all as specified and as directed.

All as per serial item No 119 but of capacity 5 HP submersible pumpset complete all as specified and as directed.

M&L for Dismantling the water mains from the delivery lines, lifting/taking up GI/UPVC Column pipes, pumping sets including submersible cable from borewell after disconnecting pumping sets from cable, repairs to the defective submersible cable and jointing of submersible cable by using water proofing jointing kit, replacement of defective column pipes, and including Lowering of submersible pump Sets of capacity 7.5 HP/5 HP, submersible cable, column pipes, reonnecting main delivery mains as existing and testing for satisfactory running and continuous flow of water etc complete all as directed by Engineer in charge in bore wells at Bhojraj Amn Dump locations under GE(W)Hisar. Note The above rate includes all T&P for taking out pump from borehole compete all as specified and directed

M&L for replacement of oil seal packing complete all as specified and directed.

Supply & Fixing in replacement PVC foot Valve with conical Strainer Suitable for 50mm dia CI/GI pipe suction pipe of clear water pump including all necssary arrange ment flanges ,Nut & bolts etc complete all as specified & directed ,

M & L for preparation of old painted surfaces by removing dust, rust, oil and applying synthetic enamel paint by spraying of approved make and colour on Pipe of size 80 to 100 mm bore and including sluice valves in W/S installations with colour code as directed.

S&F Non-return valves cast iron body, ISI marked, heavy duty both ends flanged suitable for 80 mm bore pipe fixed in repairs/replacement all as specified and directed.

All as per item No. 126.00 but of size 100 mm bore all as specified and directed.

Supply and fixing Sluice valves class P N 1.6 cast iron body with forged steel spindle, non rising type, with cast iron wheel head, both end flanged, ISI marked, 150 mm bore including neoprene rubber gasket, nuts, bolts, washers, etc fixed in repairs/replacement all as specified and directed.

All as per item No 128 but of size 100mm bore all as specified and directed.

All as per item No 128 but of size 80mm bore all as specified and directed.

Supply & Fixing Cast iron Casing cover/body suitable for 15 HP openwell submersible pumpset at EBS Complete as specified and directed.

YASHU CONTRACTORS

virendra constructions

fauji electric works

M/S Sulakh Brothers

KUNAL ENTERPRISES