Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.8 L+₹2.9 L (8.34%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹39.7 L+₹4.8 L (13.8%)Rejected-Finance 183 AMBEDKAR NAGAR BLOCK NO 330 JUHI LAL COLONY KANPUR 208014 | KANPUR NAGAR | UTTAR PRADESH | 208014 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹39.9 L+₹5.0 L (14.5%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹44.9 L+₹10.0 L (28.8%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
Tender Value
₹44.9 L
EMD Value
₹89,712
Closing Date
13 Feb 2025, 11:00 amClosed
Senior Manager (Engg.-Elect.)
Senior Manager (Engg.-Elect.), Airports Authority of India, Operational Offices, Maharana Pratap Airport, Dabok, Udaipur 313022 (Rajasthan)
SITC of Air-conditioning system.
2025_AAI_224543_1
AAI/UDR/ENGG(E)/24-25/MSSR/AC
Open Tender
Electrical Works
Item Rate
120 days
Maharana Pratap Airport, Dabok, Udaipur (Rajasthan
As per WNIT
17 documents required · 17 mandatory
₹1,180
₹89,712
11 Apr 2025
23 Jan 2025
14 Feb 2025
24 Jan 2025
13 Feb 2025
24 Jan 2025
24 Jan 2025 - 30 Jan 2025
Amount
The Indoor unit shall comprise of Variable capacity Inverter Scroll Compressor, Fiberglass corrosion resistant EC fans, Evaporator DX Cooling Coil with hydrophilic coating, Microprocessor controllers, Thermostatic/Electronic Expansion valves, Driers, EU4/G4 Filter, Suction and Discharge piping, Internal power and Control wiring, Crank case heaters, infrared/steam Electrode Humidifier, HP/LP Cutouts, Power and Control contactors, water leak detectors and Other Electrical accessories. Each unit shall be BMS compatible and shall have inbuilt software to faciliate BMS connectivity through RS485 Modbus Protocol and Ethernet with Modbus Protocol and HTTP Protocol. Each unit shal have individual display panel, which shall display date, time, actual & set values, operating conditions, signal faults, collective faults, limiting values etc. as per the specifications considered excluding initial gas charge. The Outdoor Condenser unit shall have IP 54 protection and shall comprise of Condenser fans & motor, Condenser cooling coil (Copper coil with aluminum fins), automatic Fan speed controller, Isolator switch.Complete as per OEMs specifications.
Installation, tensting and commisiooning of Floor Mounted, Bottom discharge, Air Cooled DX type Precision AC Units (Indoor & Outdoor) for Equipment room application, including Lifting, shifting & positioning of Indoor and outdoor units, Pressure testing, Vacumzing, charging, communication cabling, integration, interfacing, sequential operation, testing Commissioning of the system by OEM engineer, including providing of suitable MS stand for Indoor and Outdoor units as per OEM, Initial charge of R-410A refrigerant gas, including minor civil work complete as per site requirement.
Supply & fixing of 18 gauge Hard Drawn Copper Pipe Refrigerant piping duly complete with all insulation, supports, clamps, fittings, connections, sleevs etc fittings and finished with two coated of enamel paint of approved colour code including suitable thickness as per OEM closed cell elastromeric insulation with Class 'O' fire retardent properties for piping the air conditioned space.
Supply & Installation of Electrical PVC INSULATED & FRLS MULTI CORE copper cable (as per IS 694) on surface, cable tray, pipe as per site requirement (Cable size-4x2.5 Sq.mm.).
Supply & Installation of Electrical PVC INSULATED & FRLS MULTI CORE copper cable (as per IS 694) on surface, cable tray, pipe as per site requirement (Cable size-4 x 25 Sq.mm.).
Providing & fixing GI sheet cover over the cable trays on the cable trays of size 300 mm width X 50 mm depth by using 2 mm thick GI sheet including bending as per required size, fixing securely over the cable trays to give a finished look complete as required as per site requirement.
Supply and fixing of 25 mm dia CPVC Pipe for humidifier inlet. Complete with fittings supports, valves, 6 mm thick nitrile rubber insulation as required.
Supply and fixing of 40 mm dia CPVC Pipe for drain pipe. Complete with fittings supports, valves, 6 mm thick nitrile rubber insulation as required.
Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
For 0.63mm thick
For 0.8 mm thick
For 1.0mm thick
For 1.25 mm thick
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
GI volume control damper
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers (600mmX600mm)
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
Fire damper
Actuator
Supply & fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3, with 25 mmX 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with reinforced plastic tissue paper and 0.5 mm thick perforated aluminium sheet fixed to inside surface of ducts with cadmium plated nuts, bolts , stick pins ,CPRX compound etc.complete as required and as per specifications.
Acoustic lining of supply air duct and plenum with 25mm thick resin bonded glass wool having density of 32kg/m3
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct / area under false flooring after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.
Nitrile rubber insulation - 19 mm
Supply of following capacity 5 Star Inverter technology Split type Air-Conditioner unit fitted with hermetically sealed compressors operating on refrigerant R-410A or equivalent green gas suitable for wall mounting and suitable for operating on 230V +_10%, 50Hz, Single Phase, AC Supply
Supply of Cassette Type Air Conditioner, inside Equipment room with 100% copper condensing unit comprising of sealed twin rotary/Scroll/BLDC type compressor with Inverter Technology and Non CFC refrigerant like R410A suitable for stabilizer free operation at 3ph, 415V , 50Hz AC supply as required of following capacities
3 TR Four way, 4 star rated
ITC of 3 TR cassette ac including 3 metre refrigerant piping ,drain pipe etc. enclosing in with nitrile rubber insulation including wrapping in white vinyl tape, etc. as required, cabling,related civil works and including first charge of refrigerant &providing & fixing of Iron stand for outdoor unit etc. complete as required.
ITC of 1.5/2 TR Split airconditioners including 3 metre refrigerant piping,cabling for quantity as per site requirement between condenser and evaporator unit ,enclosing in with nitrile rubber insulation including wrapping in white vinyl tape, etc. as requiredcabling,related civil works and including first charge of refrigerant &providing & fixing of Iron stand for outdoor unit etc. complete as required.
SITC of extra length of copper pipe for quantity in excess of 3 metres which is already taken in item no. 17 & 18 (suction & discharge together)as per design of OEM between condenser and evaporator unit enclosing in with nitrile rubber insulation including wrapping in white vinyl tape etc. as required
For 1.5 TR & 2 TR AC
For 3 TR Cassette AC
SITC of extra length of drain pipe for quantity in excess of 3 metres from evaporator to a suitable location for 1.5 TR ,2 TR & 3 TR AC's as per design of OEM etc as required.
Supply of Induction Cook top of 1500 W nominal capacity with push button controls, suitable for single phase 230 volt, 50Hz AC supply etc with all accessories as required. (Make: Philips/Havells/Usha/Bajaj/Prestige)
Supply of Stainless Steel 1.5 ltrs nominal capacity electrical kettel of 1500 W ,suitable for single phase 230 volt, 50Hz AC supply etc with all accessories as required. (Make: Philips/Bajaj/Havells/Inalsa)
Supply & Installation of nominal screen size of 42 inch LED Type Smart TV,suitable for single phase 230 volt, 50Hz AC supply etc with all accessories including DTH connection as required. (Make: Sony/LG/Samsung/Philips)
Supply of 25 ltr nominal capacity microwaveoven with 3 pin plug top and three core lead of Cu wire as per OEM suitable for single phase 230 volt, 50Hz AC supply etc with all accessories as required. (Make: IFB/LG/Samsung/Panasonic)
Supply of 183/185 ltr nominal capacity 5 star rated single compartment portable refrigerator with compressor,thermostate,indication with 3 Pin plug top and three core lead of Cu wire as per OEM suitable for single phase 230 volt, 50Hz AC supply etc with all accessories as required. (Make: Whirlpool/LG/Samsung/Godrej)
Supply and fixing of cyclic timers for 1.5 Tr/2.0 Tr Split Air conditioners for single phase 230 volt, 50Hz AC supply
Comfort systems (BID ID -817003)
NAQVI BROTHERS (BID ID -817567)
Utility Services (BID ID -817104)
AirBizz AirConditioning Pvt. Ltd. (BID ID -812128)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .