Construction of DIC Office Building and Modification or Renovation of Existing Office Building at SAILDSP, Durgapur

ABSTRACT OF COST

Construction of DIC Office Building and Modification / Renovation of Existing

Office Building at SAIL-DSP, Durgapur

SL.NO. PARTICULARS

1 DIC OFFICE BUILDING

1.1 Civil Works 22,064,447

1.2 Interior Renovation & Finishing Works 13,852,736

2 Internal Plumbing Works 1,498,997

3 Internal Elec. & VRF System 14,271,591

4 Repairs & Renovation Works Of Existing DIC Building. 1,090,913

5 Addressable Fire Detection & Alarm System 712,354

(Rupees Five Crore Thirty Four Lakh Ninety One Thousand Thirty Eight Only)

Digitally signed by SILKI

Construction of DIC Office Building and Modification / Renovation of Existing Office Building at SAIL-DSP, Durgapur

Sl. No. DOR-2023 DESCRIPTION UNIT QTY. MR RATE DSR AMT. NSOR Amount

A 2.00 EARTH WORKS

1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

i 2.6.1 All kinds of soils Cum 989.04 177.50 175,554.07

2 2.7 Earth work in excavation by mechanical means (Hydralic excavator/manual means)over

areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed

by Engineer - in Charge

2.2 2.7.3 Hard rock (blasting prohibited) Cum 10.00 1432.95 14,329.50

3 2.10 Excavating trenches of required width for pipes, cables, etc. including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out

the excavated soil, and then returning the soil as required, in layers not exc

a 2.10.1 All kinds of soil.

i 2.10.1.2 Pipes, cables, etc. exceeding 80mm dia but not exceeding 300mm dia. Metre 10.00 352.15 3,521.50

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming

and watering, lead up to 50 m and lift upto 1.5 m. Cum 729.17 196.00 142,917.61

5 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

6 2.28 Surface dressing of the ground including removing vegetation and inequalities not

exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

i 2.28.1 All kinds of soil Sqm 362.39 34.15 12,375.78

7 2.34 Supplying chemical emulsion in sealed containers including delivery as specified

i 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 40.00 234.75 9,390.00

8 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical emulsion) :

i 2.35.1.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres /

sqm of the vertical surface of the substructure to a depth of 300mm including excavation

channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20%

with 1% concentration Metre 70.00 38.90 2,723.00

a) 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300

mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1

cement : 2 Coarse sand) to match the existing floor:

i 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration Sqm 80.00 310.05 24,804.00

TOTAL (Carried Over to Summary of Civil Works) 476,720.19 0.00

B 4.00 CONCRETE WORKS

1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

b 4.1.5 1 :3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from

natural sources : 6 graded stone aggregate 20 mm nominal

size derived from natural sources) Cum 60.15 7294.70 438,780.36

2 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1

cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate

20mm nominal size derived from natural sources). Sqm 13.83 495.75 6,853.74

3 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses

by weight of cement as per manufacturer's specification. Per 50 kg cement 4.00 18.15 72.60

4 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved

quality using 1.7kg per square metre on damp proof course after cleaning the surface with

brushes and finally with a piece of cloth lightly soaked in kerosene oil.

5 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand

(zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry

brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine

sand, including necessary excavation, levelling & dressing & finishing the top smooth.

TOTAL (Carried Over to Summary of Civil Works) 481,445.73 0.00

C 5.00 REINFORCED CEMENT CONCRETE WORK

1 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

a 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 337.99 392.15 132,540.82

b 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses

c 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 790.90 927.25 733,364.71

e 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 679.06 736.40 500,063.10

f 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 392.23 961.30 377,052.62

g 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 115.90 764.95 88,657.71

j 5.9.16 Edges of slabs and breaks in floors and walls

5.9.16.1 Under 20 cm wide Metre 0.00 208.55 0.00

k 5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sqm 0.00 951.10 0.00

2 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

i 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 27483.85 107.85 2,964,132.95

3 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

i 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 34202.82 107.85 3,688,773.96

4 5.33.1 Providing and laying in position ready mixed or site batched design mix cement concrete

for reinforced cement concrete work; using coarse aggregate and fine aggregate derived

from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength; including

pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost

of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-

charge; for the following grades of concrete. Note: Extra cement up to 10% of the

minimum specified cement content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-design the mix or bear the cost of

a) 5.33.1 All works upto plinth level.

i 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 254.85 9504.75 2,422,324.74

b) 5.33.2 All works above plinth level upto floor V level.

i 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 218.41 9860.40 2,153,650.00

5 5.35 Add for using extra cement in the items of design mix over and above the specified

cement content therein. quintal 44.42 733.50 32,582.15

TOTAL (Carried Over to Summary of Civil Works) 13,114,121.01 0.00

D 6.00 BRICK WORK

1 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:

i 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 4.15 7132.25 29,581.01

Sl. No. DOR-2023 DESCRIPTION UNIT QTY. MR RATE DSR AMT. NSOR Amount

2 6.34 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10

average compressive strength in super structure above plinth level up to floor V level in :

i 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) Cum 128.52 8752.55 1,124,893.38

3 6.45 Half brick masonry with non modular fly ash bricks of class designation 10, conformingio

IS :12894, in super structure above plinth and upto floor V level.

3.1 6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 92.41 1105.80 102,182.91

4 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course

of half brick masonry. Sqm 92.41 104.80 9,684.18

TOTAL (Carried Over to Summary of Civil Works) 1,266,341.49 0.00

E 10.00 STEEL WORK

1 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.

flats, square or round bars etc. including priming coat with approved steel primer all

complete.Fixed to openings /wooden frames with rawl plugs screws etc. Kg 193.68 238.35 46,163.63

2 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp,

of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top

surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet

box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall

be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

3 10.25.1 Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required. In stringers, treads, landings etc. of stair

cases, including use

of chequered plate wherever required, all complete Kg 528.12 220.65 116,529.68

TOTAL (Carried Over to Summary of Civil Works) 165,165.31 0.00

F 11.00 FLOORING WORK

1 16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water

absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court yard, multi modals location etc.,

laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes &

patterns including grouting the joints with white cement mixed with matching pigments etc.

complete as per direction of Engineer-in-Charge.

TOTAL (Carried Over to Summary of Civil Works) 464,198.96 0.00

G 13.00 FINISHING WORK

1 13.4 12 mm cement plaster of mix :

2 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement

: 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine

3 5.3 Add or deduct for plaster drip course/ groove in or moulding to R.C.C.

projections.plastered surface metre 108.20 78.40 8,482.88

4 13.16 6 mm cement plaster of mix :

5 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion per bag of 50KG

recommended by the manufacturers. Cement Used in Mix 373.43 22.10 8,252.86

6 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and

including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Sqm 747.38 171.10 127,877.30

TOTAL (Carried Over to Summary of Civil Works) 904,374.45 0.00

H 21.00 ACP WORK STRUCTURAL GlAZING WORKS

1 8.32 Designing, fabricating, testing, installing and fixing in position Curtain

Wall with Aluminium Composite Panel Cladding, with open grooves for

linear as well as curvilinear portions of the building , for all heights and all

levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper drainage

of water to make it watertight including checking of all the structural and

functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium

composite panel cladding in pan shape in metalic colour of approved

shades made out of 4 mm thick aluminium composite panel material

consisting of 3 mm thick FR grade mineral core sandwiched between

two Aluminium sheets (each 0.5 mm thick). The aluminium composite

panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of approved colour and shade

on face# 1 and polymer (Service) coating on face# 2 as specified using

stainless steel screws, nuts, bolts, washers, cleats, weather silicone

sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 I MS with Hot

Dip Galvanised with serrations and serrated washers to arrest the wind

load movement, fasteners, SS 316 Pins and anchor bolts of approved

make in SS 316, Nylon separators to prevent bi-metallic contacts all

complete required to perform as per specification and drawing The item

includes cost of all material & labour component, the cost of all mock

ups at site, cost of all samples of the individual components for testing

in an approved laboratory, field tests on the assembled working curtain

wall with aluminium composite panel cladding, cleaning and protection of

the curtain wall with aluminium composite panel cladding till the handing

over of the building for occupation. Base frame work for ACP cladding

is payable under the relevant aluminium items. The Contractor shall

provide curtain wall with aluminium composite panel cladding, having

all the performance characteristics all complete , as per the Architectural

drawings, as per item description, as specified, as per the approved shop

drawings and as directed by the Engineer-in-Charge. However, for the

purpose of payment, only the actual area on the external face of the

curtain wall with Aluminum Composite Panel Cladding (including width of

groove) shall be measured in sqm. up to two decimal places. Sqm 439.00 5015.05 2,201,606.95

Sl. No. DOR-2023 DESCRIPTION UNIT QTY. MR RATE DSR AMT. NSOR Amount

2 25.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per

the architectural drawings and approved shop drawings , the aluminium quality as per

grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80

microns conforming to AAMA 2604 of required colour and shade as approved by the

Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws

etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be

paid on this account). The weight of aluminium extruded section shall be taken for purpose

25.2 Designing, fabricating, testing, protection, installing and fixing in position

semi (grid) unitized system of structural glazing (with open joints) for

linear as well as curvilinear portions of the building for all heights and all

levels, including:

(a) Structural analysis & design and preparation of shop drawings for the specified design

loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times

design wind pressure without any failure), including functional design of the aluminum

sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and

splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,

structural and weather silicone sealants, flashings, fire stop (barrier)-

cum-smoke seals, microwave cured EPDM gaskets for water tightness,

pressure equalisation & drainage and protection against fire hazard

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005

T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional

movement for achieving perfect verticality and fixing structural glazing system rigidly to the

RCC/ masonry/structural steel framework of building structure using stainless steel anchor

fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc.

of stainless steel grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant

and one part weather silicone sealant compatible with the structural

silicone sealant of required bite size in a clean and controlled factory /

work shop environment, including double sided spacer tape, setting

blocks and backer rod, all of approved grade, brand and manufacture, as per the

approved sealant design, within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1

mm thick and of sizes, shapes and profiles, as required as per the site

conditions, to seal the gap between the building structure and all its

interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the

curtain glazing system to make it watertight, by incorporating principles

of pressure equalization, providing suitable gutter profiles at bottom (if

required), making necessary holes of required sizes and of required

numbers etc. complete. This item includes cost of all inputs of designing, labour for

fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding

and other incidental charges including wastages etc., enabling temporary structures and

services, cranes or cradles etc. as described above and as specified.

The item includes the cost of getting all the structural and functional

design including shop drawings checked by a structural designer, dully

approved by Engineer-in-charge. The item also includes the cost of all

mock ups at site, cost of all samples of the individual components for

testing in an approved laboratory, field tests on the assembled working

structural glazing as specified, cleaning and protection till the handing

over of the building for occupation. In the end, the Contractor shall provide a water tight

structural glazing having all the performance characteristics etc. all complete as required,

as per the Architectural drawings, as per item description, as specified, as per the

approved shop drawings and as directed by the Engineer- in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow

boxes, extruded aluminium section capping for fixing in the grooves of

the curtain glazing and vermin proof stainless steel wire mesh shall be

paid for separately under relevant items under this sub- head. However,

for the purpose of payment, only the actual area of structural glazing

(including width of grooves) on the external face shall be measured in

sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on structural

glazing system if area of structural glazing exceeds 2500 Sqm from the

certified laboratories accreditated by NABL(National Accreditation Board

for Testing and Calibration Laboratories), Department of Science &

Technologies, India. Cost of testing is payable separately.

Note:-2. The following performance test are to be conducted on structural

glazing system if area of structural glazing exceeds 2500 Sqm from the

certified laboratories accreditated by NABL(National Accreditation Board

for Testing and Calibration Laboratories), Department of Science &

Technologies, India. Cost of testing is payable separately.

The NIT approving authority will decide the necessity of testing on the

basis of cost of the work, cost of the test and importance of the work.

Performance Testing of Structural glazing system Tests to be conducted in the NABL

accredited lab or any other accreditation body which operates in accordance with ISO/IEC

17011 and accredits labs as per ISO/IEC 17025 1. Performance Laboratory Test for Air

Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing

method for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method

for a range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05

testing method for a range upto 2000 ml

4. Structural Performance Deflection and deformation by static air

pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10

testing method for a range upto 50 mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing

method for Qualitative test, Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa

(35psi) upto 2000 ml

Sl. No. DOR-2023 DESCRIPTION UNIT QTY. MR RATE DSR AMT. NSOR Amount

3 25.3 Providing, assembling and supplying vision glass panels (IGUs)

comprising of hermetically-sealed 6-12- 6 mm insulated glass (double

glazed) vision panel units of size and shape as required and specified,

comprising of an outer heat strengthened float glass 6 mm thick, of

approved colour and shade with reflective soft coating on surface # 2 of

approved colour and shade, an inner Heat strengthned clear float glass

6 mm thick, spacer tube 12 mm wide, dessicants, including primary seal

and secondary seal (structural silicone sealant) etc. all complete for the

required performances, as per the Architectural drawings, as per the

approved shop drawings, as specified and as directed by the Engineerin-

Charge. The IGUs shall be assembled in the factory/ workshop of the

glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost

of item No.25.2)

For payment, only the actual area of glass on face # 1 of the glass panels

(excluding the areas of the grooves and weather silicone sealant) provided

and fixed in position, shall be measured in sqm.

(i) Coloured tinted float glass 6 mm thick substrate with reflective soft

coating on face # 2, + 12 mm Airgap + 6 mm Heat Strengthened clear

Glass of approved make having properties as visible Light transmittance

(VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection

external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0

to 3.3 W/m2 degree K etc. The properties of performance glass shall be

decided by technical sanctioning authority as per the site requirement.

4 25.4 Extra for openable side / top hung vision glass panels (IGUs) including

providing and supplying at site all accessories and hardwares for the

openable panels as specified and of the approved make such as heavy

duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel

plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts,

bolts, washers etc. all complete as per the Architectural drawings, as per the approved

shop drawings, as specified and as directed by the Engineer- in-Charge.

5 MR -1 Providing and fixing of Aluminium vertical Louver System

fabricate Using Aluminium tube 50X50MM rate includes all

hardware ,fastener and strengthening arrangement as per

approval of the Engineer-in charge, all complete.

6 MR -2 Designing, supplying, fabricating and erecting in position, point

fixed glass for canopy with 8MM clear Float toughened + 1.5 to

PVB Clear laminated + 8MM clear Float toughened glass of Saint

Gobain/Equivalent Make. The system should be designed to

withstand the wind pressure of 160 KG/SQ.MTR confirms to IS

875-1987(Part III). The entire glazed canopy will be flush on the

label and SS spider fitting in true line and slope. All holes in the

glass shall be drilled in cone shape. All the glass expansion joints

to be sealed with clear UV proof structural silicon sealant. All the

gap between glass to be sealed, whether sea land. The cost

include all labour materials, bolts, and nuts Tools tackles hosting

machines. Equipment’s, transportation, etc. Complete the

system salvage test to perform as per specific including all

material test. The coat rate shall include all design engineering

and shop drawing. Approved from engineer in charge, architect

before commissioning the work. Note: payment shall be made as

per actual measurement after completion of work Sqm 7.10 12335.00 87,578.50

7 MR-3 Providing and fixing MS WORK incliding primer one coat & enalam paint two coat.

complete as per direction of Engineer-in-Charge.

8 14.72 Providing and fixing double scaffolding system (cup lock type) on the

exterior side, up to seven story height made with 40 mm dia M.S. tube

1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the

scaffolding for working platform etc. and maintaining it in a serviceable condition for the

required duration as approved and removing it there after. The scaffolding system shall be

stiffened with bracings, runners, connection with the building etc wherever required for

inspection of work at required locations with essential safety features for the workmen etc.

complete as per directions and approval of Engineer-in-charge. The elevational area of the

scaffolding shall be measured for payment purpose.

The payment will be made once irrespective of duration of scaffolding. Note: - This

item to be used for maintenance work judicially, necessary

deduction for scaffolding in the existing item to be done.

TOTAL (Carried Over to Summary of Civil Works) 2946657.70 352908.94

I 22.00 WATER PROOFING

1 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure

for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water

proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4

hours followed with water curing for 48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer

mixed slurry. SQM 18.18 617.05 11,216.12

2 22.7 Providing & laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc consisting of following

operations: a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed

with water proofing compound confirming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300mm height including cleaning the

surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats

25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand )

admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-

in-charge over 20 mm thick layer of cement of 1:5 ( 1 cement : 5 coarse sand ) admixed

with water proofing compound confirming to IS : 2645 and approved by Engineer-in-

charge to required slope and treating similarly the

Sl. No. DOR-2023 DESCRIPTION UNIT QTY. MR RATE DSR AMT. NSOR Amount

adjoining walls upto 300mm height including rounding of junctions of walls and slabs. c)

After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm

of cement admixed with water proofing compound confirming to IS : 2645 and approved

by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar

1:4 (1 cement : 4 coarse sand ) admixed with water proofing compound confirming to IS :

2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved

quality in top layer and finally finishing the surface with trowel with neat cement slurry and

making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall

be flooded with water for a minimum period of two weeks for curing and for final test. All

above operations to be done in order and as directed and specified by the Engineer-in-

2.1 22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65mm. SQM 308.00 1684.60 518,856.80

TOTAL (Carried Over to Summary of Civil Works) 530,072.92 0.00

J 22.00 6 Passenger lift

1 MR-4 Providing, fixing, and installing, 6 passenger Lift well size - 1550 mm (W) x 1550 mm (D),

No. of Stops 03, Openings- 03, Ground Floor to Second Floor 3.3 m ht. Clear Door

Opening- 700mm x 2000mm, Speed of Lift - 0.6 M/s, Automatic rescue device, etc., with

all necessary features, machine room Less, finish Side walls: Painted Pearl White, Rear

wall: Painted Saffron yellow, Front wall: Painted Pearl White, Handrail Round Bend

Handrail. Painted Traffic Black at Rear Wall, Ceiling & Lighting Integrated roof LS5 (RL5F)

Painted Pearl White [TYP_CAR_LIGHTING(LS5)]

Flooring 3 mm Pattern (PVC) Dark Grey Marble Pattern all complete as per specification

and instruction of Engineer in charge. Each 1.00 1,362,440.00

TOTAL (Carried Over to Summary of Civil Works) 0.00 1,362,440.00

ALL SUB-HEAD TOTAL 20,349,097.75 1,715,348.94

GRAND TOTAL 22,064,446.69

GRAND TOTAL 22,064,446.69

Construction of DIC Office Building and Modification / Renovation of Existing Office Building at SAIL-DSP, Durgapur

INTERIOR RENOVATION & FINISHING WORKS

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

A GROUND FLOOR

1 Supplying and laying true to line and level Double Charge Vitrified Tiles

of approved brand conforming to IS 15622: 2006 (Group B I a) and

tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for

tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in

20 mm thick sand cement mortar (1:4) bed prepared after application

of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick

cement slurry using cement @2.91Kg./sqm at the back side of the tiles

and laid over the mortar bed using 0.2 kg/sqm of White cement used

for joint filling with approved pigment as directed and removal of wax

coating of top surface of tiles with warm water and polishing the tiles

using soft and dry cloth upto mirror finish complete including the cost of

materials,Iabour and all other incidental charges complete true to the

manufacturer's specification and direction of Engineer-in-Charge.

1.01 Size not Iess than 800mm X 800 mm X 10.2 mm thick. Sqm. 155 2,532.00 392,460.00

1.02 Size not Iess than 600mm X 600 mm X 9.5 mm thick. Sqm. 280 1,484.00 415,520.00

2 Extra for epoxy grouting materials for filling joints including spacer-2

3 Providing and fixing 1st quality ceramic glazed wall tiles conforming to

IS: 15622 (thickness to be specified by the manufacturer), of approved

make, in all colours, shades except burgundy, bottle green, black of

any size as approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3

coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching

shade complete.

4 Providing and laying Vitrified tiles in floor in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

conforming to IS: 15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement:

sand) jointing with grey cement slurry @3.3 kg/sqm including grouting

the joints with white cement and matching pigments etc. The tiles must

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

Glazed Vitrified tiles Matt Antiskid finish of size

Size of Tile 600 x 600 mm

5 Supplying, fitting & fixing granite slab 15mm to 18mm thick in floor,

lobby, stair, landing and treads etc. over 20mm(avg) thick base of

cement mortar (1:2) laid with white cement slurry @4.40 Kg per square

meter before placing of granite and jointed with white cement slurry @ Sqm. 335 3,025.00 1,013,375.00

2.0 Kg per square meter with necessary pigments and complete as per

direction of Engineer-in-Charge including cost of all materials, labours,

curing and roughening of concrete surface complete.

6 Cost of labour for prefinished and premoulded Nosing to treads of

steps, railing, window sill etc. of granite/stone.

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

7 Providing and fixing machine cut, mirror polished, Italian Marble stone

18 mm thick (Imported quality, such as Perlato, Bottichino, Crema,

Antique Beige, Dark Emperadore, Red Verona, Black Marquino etc.) in

dado/wall laid in required pattern in linear portion of the building all

complete as per architectural drawings with Italian Marble stone slab

laid over 15mm (average) thick base of cement mortar 1 : 2 (1 cement :

2 coarse sand) including making suitable arrangements to hold the

stones properly by brass / copper hooks applying white cement Sqm. 7 5,843.00 40,901.00

[email protected] kg/sq.m the back site of marble and pointing with cement

mortar (1:2) (1 cement : 2 marble dust) admixed with pigment to match

the marble shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge

including cost of materials, labours, scaffolding, staging, curing

8 Cost of labour for prefinished and premoulded window sill of Italian

9 Providing and fixing M.F. suspended ceiling made with 12.5 mm thick

Gypsum plaster board including G.I. perimeter channel of 0.55 mm

flush (having two flanges 20 mm and 30 mm respectively and web 27

mm ) along with perimeter of ceiling with G.I. intermediate channel of

0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling

angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I.

Cleat and steel expansion fastener ceiling section 0.55 mm thick of

size 51.50 mmx26mm fixed to the intermediate channels with the help

of connecting clip and in the direction of perpendicular to the Sqm. 200 1,159.00 231,800.00

intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered

board are to be fixed under ceiling section as above by machine

screws. The boards are to be joined and finished with jointing

compound, paper tape and application of top coat etc. as per the

direction of Engineer-in-Charge. (The rate includes of cost of all

materials including taxes, cost of accessories, fittings and fixtures,

scaffolding and labour charges etc. complete.)

10 Providing and fixing decorative false ceiling, framework made with 25 x

50 mm aluminium extruded section of wall thickness 1.5 mm fixed from

true ceiling with aluminium L cleat 25 x 25 mm. Framework to be done

at spacing not exceeding 600 mm c/c both ways. Paneling surface to

be done with 12 mm thick BWP grade solid plywood conforming to

IS:710, complete as per design and direction of Engineer-in-Charge. Sqm. 135 4,950.00 668,250.00

Plywood surface to be fixed and finished with PVC interlocking planks

8 mm thick made in honey-comb construction of width 200/250 mm.

The rate includes cost of material, accessories, labour, scaffolding and

all incidental charges.

11 Providing and fixing wall/column paneling, framework made with 25 x

50 mm aluminium extruded section of wall thickness 1.5 mm fixed on

masonary surface with aluminium L cleat 25 x 25 mm. Framework to be

done at spacing not exceeding 600 mm c/c both ways. Paneling Sqm. 30 4,850.00 145,500.00

surface to be done with 12 mm thick BWP grade solid plywood

conforming to IS:710, complete as per design and direction of

Engineer-in-Charge. The rate includes cost of material, labour,

scaffolding and all incidental charges.

12 Providing and fixing decorative lamination conforming to IS: 2046 :

1995 as per approved make, brand, finish and thickness with fitting,

fixing the same on plywood with recommended / approved adhesive

with proper clipping the sides for better attachment as per design and Sqm. 95 688.00 65,360.00

direction of Engineer-in-Charge. The rate includes the cost of material,

labour, scaffolding, adhesive and all incidental charges. Thickness of

laminate - 1 mm.

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

13 Providing and fixing door hardware/fittings from decorative range of

approved make Godrej/Ozone/Dorset for solid core flush door

consisting of 1 no. medium duty hydraulic door closure, single lever

mortise lock with pair of handles in SS matt finish, 1 no. of door stopper

in SS matt finish, 1 no. of tower bolt (6") and 4 nos. of hinges (4") in SS

304 grade, all complete.

14 Supplying, fitting and fixing solid flush type doors of commercial quality,

the timber frame consisting of top and bottom rails and side styles of

well seasoned timber 65 mm wide each and the entire frame fitted with

37.5 mm wide battens places both ways in order to make the door of

solid core and internal lipping with Garjan or similar wood veneers Sqm. 4 2,659.00 10,636.00

using phenol formaldehyde as glue etc. complete, including fitting,

fixing shutters in position, all complete as per direction of Engineer-in-

Charge. 32 mm thick shutters (single leaf) with vision aperture with

5mm thick glass pane with wooden beads.

15 Providing Wood work with Malayasian Sal in door and window frame

fitted and fixed in position complete including a protective coat of

painting at the contact surface of the frame exluding cost of concrete,

Iron Butt Hinges and M.S clamps.

16 Removing loose scales, blisters etc. from old painted surface and

thoroughly smoothening the surface to make the same suitable for Sqm. 350 39.00 13,650.00

receiving fresh coat of paint.

17 Rendering the surface of walls and ceiling with white cement based

wall putty of approved make and brand (1.5mm thick), complete to the Sqm. 1150 110.00 126,500.00

entire satisfaction of Engineer-in-Charge.

18 Providing and applying water based interior grade Acrylic Primer of

approved quality and brand, 2 coats on plastered or concrete surface

old or new surface to receive acrylic emulsion paint including scraping

and preparing the surface throughly, complete as per manufacturer's

specification and as per direction of Engineer-in-Charge.

19 Providing and applying Acrylic Emulsion Paint of approved make and

brand, 2 coats on walls and ceiling including sand papering in

intermediate coats including putty to the entire satisfaction of Engineer-

20 Providing and applying protective and decorative Textured exterior

high class matt finish paint, 2 coats of approved quality, composed of

special Tharmoplastic Resin containing fine crystalline additives derive

from Granite as per manufacturer's specification and as per direction of Sqm. 50 101.00 5,050.00

EIC to be applied over acrylic primer as required. The rate includes

cost of material, labour, scaffolding and all incidental charges but

excluding the cost of primer.

21 Priming one coat on steel or other metal surface with synthetic oil

bound primer of approved quality including smoothening surfaces by Sqm. 50 38.00 1,900.00

sand papering etc.

22 Providing and painting with best quality synthetic enamel paint of

approved make and brand, 2 coats on steel or other metal surface

including smoothening surface by sand papering etc. including using of

approved putty etc. on the surface, if necessary.

23 Supply and installation of Window Blinds with screen fabric, including

the cost of fabric, roller, accessories all complete.

24 Providing and fixing full glazed reamless sliding door with 12 mm clear

toughened glass conforming to IS: 2553-1992 (Part-II) operated on

automatic sliding mechanism of Godrej/Dorma/Hafele, all complete as Nos. 1 350,000.00 350,000.00

per direction and approval of Engineer-in-Charge. Door size - 2200 mm

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

25 Providing and fixing full glazed reamless door with 12 mm thick clear

toughened glass conforming to IS: 2553-1992 (Part-II) mounted on

heavy duty hydraulic action floor spring with top and bottom pivot

assembly, fitted with SS lock and pair of SS handles (600 mm x 32

mm), all complete as per direction and approval of Engineer-in-Charge.

Double leafs - 1800 mm x 2100 mm (h).

26 Providing, fabricating and fixing SS Railing 950 mm high (above the

finished floor) with 50 mm dia. x 2 mm thick SS 304 grade pipe as top

hand rail main runner and 50 mm x 50 mm x 2 mm thick bottom runner

housing 12 mm thick clear toughened glass with necessary supports,

plates, anchor fasteners, supports as per design and direction of

Engineer-in-Charge.

27 Providing, fabricating and fixing in position SS Hand Rail along

walls with main bar 40 mm dia. x 2 mm thick SS 304 grade pipe with all

necessary fittings as the main runner joined to 25 mm dia. SS pipe and

vertical bracket 2 mm thick held on to walls by means of

fasteners, base plates @ every 1050 mm c/c complete as per design

and direction of Engineer-in-Charge.

28 Providing, fabricating and fixing MS Railing 950 mm high (above the

finished floor) with 50 mm dia. x 2 mm thick MS pipes as main runner

and 19 mm dia. x 2 mm thick pipe at 4 levels along the running length

of the staircase and vertical supports in 40 mm x 2 mm thick pipes in Rmt. 0 7,460.00 -

approved profilie @ 1350 mm c/c, with necessary supports, plates,

anchor fasteners, supports as per design and direction of Engineer-in-

29 Providing and fixing sandwiched acrylic panel with 2 layers of acrylic

sheets of imported quality, first layer with 4 mm thick acrylic sheet and

6 mm thick acrylic sheet on top with bevelled edges on all sides. Panel Sqm. 10 4,850.00 48,500.00

to be mounted on wall/partition with SS studs (25 mm dia. x 25 mm), all

complete as per design.

30 Supplying FRP Planter Box, size - 30" x 10" x 10". Nos. 10 4,480.00 44,800.00

31 Providing and fixing mirror of extra clear quality, 6 mm thick fixed on

existing wall/partition with SS studs (25 mm dia. x 25 mm). Mirror

edges on all sides to be polished as per direction of Engineer-in-

SUB-TOTAL A 5,137,299.18

1 Supplying and laying true to line and level Double Charge Vitrified Tiles

of approved brand conforming to IS 15622: 2006 (Group B I a) and

tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for

tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in

20 mm thick sand cement mortar (1:4) bed prepared after application

of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick

cement slurry using cement @2.91Kg./sqm at the back side of the tiles

and laid over the mortar bed using 0.2 kg/sqm of White cement used

for joint filling with approved pigment as directed and removal of wax

coating of top surface of tiles with warm water and polishing the tiles

using soft and dry cloth upto mirror finish complete including the cost of

materials,Iabour and all other incidental charges complete true to the

manufacturer's specification and direction of Engineer-in-Charge.

1.01 Size not Iess than 800mm X 800 mm X 10.2 mm thick. Sqm. 500 2,532.00 1,266,000.00

1.02 Size not Iess than 600mm X 600 mm X 9.5 mm thick. Sqm. 620 1,484.00 920,080.00

2 Extra for epoxy grouting materials for filling joints including spacer-2

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

3 Providing and fixing 1st quality ceramic glazed wall tiles conforming to

IS: 15622 (thickness to be specified by the manufacturer), of approved

make, in all colours, shades except burgundy, bottle green, black of

any size as approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3

coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching

shade complete.

4 Providing and laying Vitrified tiles in floor in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

conforming to IS: 15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement:

sand) jointing with grey cement slurry @3.3 kg/sqm including grouting

the joints with white cement and matching pigments etc. The tiles must

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

Glazed Vitrified tiles Matt Antiskid finish of size

Size of Tile 600 x 600 mm

5 Providing and fixing machine cut, mirror polished, Italian Marble stone

18 mm thick (Imported quality, such as Perlato, Bottichino, Crema,

Antique Beige, Dark Emperadore, Red Verona, Black Marquino etc.) in

dado/wall laid in required pattern in linear portion of the building all

complete as per architectural drawings with Italian Marble stone slab

laid over 15mm (average) thick base of cement mortar 1 : 2 (1 cement :

2 coarse sand) including making suitable arrangements to hold the

stones properly by brass / copper hooks applying white cement Sqm. 7 5,843.00 40,901.00

[email protected] kg/sq.m the back site of marble and pointing with cement

mortar (1:2) (1 cement : 2 marble dust) admixed with pigment to match

the marble shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge

including cost of materials, labours, scaffolding, staging, curing

6 Cost of labour for prefinished and premoulded window sill of Italian

7 Providing and fixing M.F. suspended ceiling made with 12.5 mm thick

Gypsum plaster board including G.I. perimeter channel of 0.55 mm

flush (having two flanges 20 mm and 30 mm respectively and web 27

mm ) along with perimeter of ceiling with G.I. intermediate channel of

0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling

angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I.

Cleat and steel expansion fastener ceiling section 0.55 mm thick of

size 51.50 mmx26mm fixed to the intermediate channels with the help

of connecting clip and in the direction of perpendicular to the Sqm. 1050 1,159.00 1,216,950.00

intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered

board are to be fixed under ceiling section as above by machine

screws. The boards are to be joined and finished with jointing

compound, paper tape and application of top coat etc. as per the

direction of Engineer-in-Charge. (The rate includes of cost of all

materials including taxes, cost of accessories, fittings and fixtures,

scaffolding and labour charges etc. complete.)

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

8 Providing and fixing of false ceiling with powder coated exposed G.I.

grid suspension system(E-GridU-1520 or equivalent load carrying

capacity with mid span deflection not exceeding 1/360 span with

hanger spacing of 1200mmc/c) consisting of main runner 3600 mm

long, cross Tee 1200 mm/600 mm long and wall angle. The wall angle

shall be fixed on PVC dash fasteners on the perimeter of the wall by

steel screws with distance 300 mm c/c. The main runners to be placed

@1200 mm. The cross Tee 1200 mm will be inserted in the pre-cut

slots of main runner at a regular interval of 600 mm to form a modular

grid of 1200 mm X 600 mm. Additional cross Tees of 600 mm shall be Sqm. 145 1,357.00 196,765.00

placed perpendicular to the cross Tee 1200 mm long to finally form a

grid of 600 mm X 600mm. Grid of module size 600 mm X 600 mm shall

be supported by 6 mm dia G.I. wire from purlins/soffit. 15 mm thick OW

Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles of approved

pattern and size 595 mm X 595 mm with NRC value > 0.65 should be

placed in the Grid module to form a False Ceiling. All complete as per

the drawing & directions of Engineer-in-Charge.

9 Providing and fixing wall/column paneling, framework made with 25 x

50 mm aluminium extruded section of wall thickness 1.5 mm fixed on

masonary surface with aluminium L cleat 25 x 25 mm. Framework to be

done at spacing not exceeding 600 mm c/c both ways. Paneling Sqm. 250 4,850.00 1,212,500.00

surface to be done with 12 mm thick BWP grade solid plywood

conforming to IS:710, complete as per design and direction of

Engineer-in-Charge. The rate includes cost of material, labour,

scaffolding and all incidental charges.

10 Providing and fixing decorative lamination conforming to IS: 2046 :

1995 as per approved make, brand, finish and thickness with fitting,

fixing the same on plywood with recommended / approved adhesive

with proper clipping the sides for better attachment as per design and Sqm. 401 688.00 275,888.00

direction of Engineer-in-Charge. The rate includes the cost of material,

labour, scaffolding, adhesive and all incidental charges. Thickness of

laminate - 1 mm.

11 Providing and fixing Grooved Acoustical Slats Wood based MDF

panels with linear perforations. The melamine laminate in size 2440mm

x 128mm x 16mm type 28/2 i.e. having 28mm strips and 2mm groove,

tongue and groove edges for seamless mounting having density of

600kg/m3. The back of the panels are perforated with 8-10mm Sqm. 110 4,950.00 544,500.00

diameter circular holes with black acoustic fleece covering for providing

sound absorption. Panel is wooden slat will be backed with polyester

fibre 1000 gsm. Wooden slat will be fixed on 19 x 50mm ply

strip/framework.

12 Providing and fixing door hardware/fittings from decorative range of

approved make Godrej/Ozone/Dorset for solid core flush door

consisting of 1 no. medium duty hydraulic door closure, single lever

mortise lock with pair of handles in SS matt finish, 1 no. of door stopper

in SS matt finish, 1 no. of tower bolt (6") and 4 nos. of hinges (4") in SS

304 grade, all complete.

13 Supplying, fitting and fixing solid flush type doors of commercial quality,

the timber frame consisting of top and bottom rails and side styles of

well seasoned timber 65 mm wide each and the entire frame fitted with

37.5 mm wide battens places both ways in order to make the door of

solid core and internal lipping with Garjan or similar wood veneers Sqm. 30 2,659.00 79,770.00

using phenol formaldehyde as glue etc. complete, including fitting,

fixing shutters in position, all complete as per direction of Engineer-in-

Charge. 32 mm thick shutters (single leaf) with vision aperture with

5mm thick glass pane with wooden beads.

14 Providing Wood work with Malayasian Sal in door and window frame

fitted and fixed in position complete including a protective coat of

painting at the contact surface of the frame exluding cost of concrete,

Iron Butt Hinges and M.S clamps.

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

15 Removing loose scales, blisters etc. from old painted surface and

thoroughly smoothening the surface to make the same suitable for Sqm. 750 39.00 29,250.00

receiving fresh coat of paint.

16 Rendering the surface of walls and ceiling with white cement based

wall putty of approved make and brand (1.5mm thick), complete to the Sqm. 2600 110.00 286,000.00

entire satisfaction of Engineer-in-Charge.

17 Providing and applying water based interior grade Acrylic Primer of

approved quality and brand, 2 coats on plastered or concrete surface

old or new surface to receive acrylic emulsion paint including scraping

and preparing the surface throughly, complete as per manufacturer's

specification and as per direction of Engineer-in-Charge.

18 Providing and applying Acrylic Emulsion Paint of approved make and

brand, 2 coats on walls and ceiling including sand papering in

intermediate coats including putty to the entire satisfaction of Engineer-

19 Providing and applying protective and decorative Textured exterior

high class matt finish paint, 2 coats of approved quality, composed of

special Tharmoplastic Resin containing fine crystalline additives derive

from Granite as per manufacturer's specification and as per direction of Sqm. 120 101.00 12,120.00

EIC to be applied over acrylic primer as required. The rate includes

cost of material, labour, scaffolding and all incidental charges but

excluding the cost of primer.

20 Priming one coat on steel or other metal surface with synthetic oil

bound primer of approved quality including smoothening surfaces by Sqm. 110 38.00 4,180.00

sand papering etc.

21 Providing and painting with best quality synthetic enamel paint of

approved make and brand, 2 coats on steel or other metal surface

including smoothening surface by sand papering etc. including using of

approved putty etc. on the surface, if necessary.

22 Supply and installation of Window Blinds with black-out fabric,

including the cost of fabric, roller, accessories all complete.

23 Supply and installation of Motorized Fabric Curtain on tracks including

the cost of fabric, accessories and motor of make Somfy/equivalent

with remote control. Base rate of fabric- Rs. 1000 per rmt.

24 Providing and fixing sandwiched acrylic panel with 2 layers of acrylic

sheets of imported quality, first layer with 4 mm thick acrylic sheet and

6 mm thick acrylic sheet on top with bevelled edges on all sides. Panel Sqm. 5 4,850.00 24,250.00

to be mounted on wall/partition with SS studs (25 mm dia. x 25 mm), all

complete as per design.

25 Supplying FRP Planter Box, size - 36" x 12" x 16". Nos. 2 8,900.00 17,800.00

26 Providing and fixing mirror of extra clear quality, 6 mm thick fixed on

existing wall/partition with SS studs (25 mm dia. x 25 mm). Mirror

edges on all sides to be polished as per direction of Engineer-in-

27 Supplying, fitting and fixing DGU GLASS on façade using double

insulated glass unit with exterior face of SAINT GOBAIN/AIS make

high performance heat reflective toughened glass of 6 mm thick (with

light transmission VLT 34%, Solar factor SF 22 & u Value 1.7w/m2/0 K)

& interior glass in 6 mm clear non-heat strengthened & air gap of 12

mm to be installed on curtain wall mullion & transom system using Sqm. 65 10,385.00 675,025.00

extruded aluminium section make ALOM. The section should be fixed

section of 50 x 50 mm having thickness not less than 2 mm powder

coated in 40 microns in desired colour of EPDM gaskets, silicon

sealants. (Contractor to submit manufacture's test certificate)

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

28 Providing and fixing storage cabinets, structures made with 19 mm

thick BWP grade solid plywood conforming to IS:710. Back surfaces

fixed to the wall/partition to be made with 6 mm thick BWP grade

plywood. Shutters and intermediate shelves to be made with 19 mm

thick BWP grade solid plywood conforming to IS:710. All inside

surfaces to be finished with 0.7 mm thick balancer laminate and

exposed outside surfaces to be finished with 1 mm thick decorative

laminate conforming to IS: 2046 : 1995 as per approved make, brand, Sqm. 7 11,750.00 82,250.00

finish on plywood with recommended / approved adhesive. Plywood

edges to be finished with 2 mm thick PVC edge banding matching the

lamination shade. The rate includes the cost of SS hinges, handles,

locks accessories and adhesives, all complete as per design and

direction of Engineer-in-Charge. Depth of storage - 450 mm. (For

measurement purpose the face area : length x height is to be

29 Providing and fixing pantry storage cabinet, structures made with 19

mm thick BWP grade solid plywood conforming to IS:710. Back

surfaces fixed to the wall/partition to be made with 6 mm thick BWP

grade plywood. Shutters and intermediate shelves to be made with 19

mm thick BWP grade solid plywood conforming to IS:710. All inside

surfaces to be finished with 0.7 mm thick balancer laminate and

exposed outside surfaces to be finished with 1 mm thick decorative

laminate conforming to IS: 2046 : 1995 as per approved make, brand,

finish on plywood with recommended / approved adhesive. Plywood Sqm. 5 15,600.00 78,000.00

edges to be finished with 2 mm thick PVC edge banding matching the

lamination shade. Top of the storage to be provided with 18 mm thick

granite with 100 mm high splash back. Granite edge to be moulded

finished. The rate includes the cost of SS hinges, handles, locks

accessories and adhesives, all complete as per design and direction of

Engineer-in-Charge. Depth of counter/storage - 600 mm. (For

measurement purpose the face area : length x height is to be

30 Providing and fixing overhead storage cabinets, structures made with

19 mm thick BWP grade solid plywood conforming to IS:710. Back

surfaces fixed to the wall/partition to be made with 6 mm thick BWP

grade plywood. Shutters and intermediate shelves to be made with 19

mm thick BWP grade solid plywood conforming to IS:710. All inside

surfaces to be finished with 0.7 mm thick balancer laminate and

exposed outside surfaces to be finished with 1 mm thick decorative

laminate conforming to IS: 2046 : 1995 as per approved make, brand, Sqm. 3 11,500.00 34,500.00

finish on plywood with recommended / approved adhesive. Plywood

edges to be finished with 2 mm thick PVC edge banding matching the

lamination shade. The rate includes the cost of SS hinges, handles,

locks accessories and adhesives, all complete as per design and

direction of Engineer-in-Charge. Depth of storage - 450 mm. (For

measurement purpose the face area : length x height is to be

SUB-TOTAL B 8,715,436.95

TOTAL BASIC - A + B 13,852,736.13

TOTAL AMOUNT 13,852,736.13

TOTAL AMOUNT 13,852,736.13

Construction of DIC Office Building and Modification / Renovation of Existing Office Building

at SAIL-DSP, Durgapur

DSR Amount NON DSR

S.H. No. DESCRIPTION OF SUB-HEAD

(Rs) Amount (Rs)

SUB HEAD - INTERNAL PLUMBING WORKS

1 SANITARY FITTINGS & FIXTURES : 0.00 1133608.30

3 RAIN WATER WORK : 39420.00 0.00

Construction of DIC Office Building and Modification / Renovation of Existing Office Building at SAIL-DSP, Durgapur

SANITARY FITTINGS & FIXTURES

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

A GROUND FLOOR

Supply & Installation of --

Wash Basin- wall hung with half pedestal including flange, CP

waste, PVC waste, extension pipe & hanging accessories.

Cat. No: S2040163H

Cat. No: F1018101

Cat. No: F8060101

Wall hung WC with Dual Flush Cistern & soft close seat cover

including connecting pipe, flange, extension pipe, hanging

accessories etc.

Cat. No: S1043147

Cat. No: F8060101

6 CP Angular Stop Cock Nos. 17 3,658.00 62,186.00

CP Tissue Paper Holder with Flap

Cera Hera F5007110

9 Tissue Paper Dispenser Nos. 2 9,150.90 18,301.80

B 1ST FLOOR - -

Supply & Installation of -- -

DIC CHAMBER - -

Wash Basin- Granite counter top wash basin including flange,

CP waste, PVC waste, extension pipe & accessories.

Cat. No: S2020161

Shower Unit overhead rain shower Cat. No:

3 Diverter for Shower unit-Single lelver concelead diverter Nos. 1 8,968.00 8,968.00

Wash Basin- wall hung with half pedestal including flange, CP

waste, PVC waste, extension pipe & hanging accessories.

Cat. No: S2040163H

Cat. No: F1018101

Cat. No: F8060101

Wall hung WC with Dual Flush Cistern & soft close seat cover

including connecting pipe, flange, extension pipe, hanging

accessories etc.

Cat. No: S1043147

Cat. No: F8060101

9 CP Angular Stop Cock Nos. 31 3,658.00 113,398.00

CP Tissue Paper Holder with Flap

Cera Hera F5007110

Urinal with Sensor including PVC spreader, doom waste,

11 hanging accessories etc. Cat. No: Nos. 6 7,670.00 46,020.00

13 Tissue Paper Dispenser Nos. 4 9,150.90 36,603.60

Modular Urinal Partition 400 x 900mm in compact laminate

including all accessories.

SS Sink with drain board including flange, CP waste, PVC waste

& extension pipe.

GRAND TOTAL AMOUNT 1,133,608.30

GRAND TOTAL AMOUNT 1,133,608.30

Construction of DIC Office Building and Modification / Renovation of Existing Office Building at SAIL-DSP, Durgapur

INTERNAL PLUMBING WORKS

SI.No. DSR-2023/ Description of Item UNIT QUANTITY DSR-2023 MR RATE DSR AMOUNT MR

NON DSR RATE AMOUNT

SUB HEAD - INTERNAL PLUMBING WORKS

B) WATER SUPPLY

2.01 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the cost

of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good

2.02 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Internal work - Exposed on wall

2.03 MR Supplying, fixing, testing and commissioning of butterfly valve

of PN 1.6 rating with bronze/gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required :

2.04 18.62 Providing and fixing PTMT Ball cock of approved quality, colour

and make complete with Epoxy coated aluminium rod with L.P./

H.P.H.D. plastic ball.

b) 18.62.4 40 mm nominal bore, 206mm long, weighing not less than 690 Each 1 737.20 737.20 0.00

c) 18.62.5 50 mm nominal bore, 242mm long, weighing not less than 1240 Each 1 1375.95 1375.00 0.00

2.05 18.48 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, ISI : 12701 marked, with cover and suitable

locking arrangement and making necessary holes for inlet,

outlet and overflow pipes but without fittings and the base

support for tank. per litre 10000 11.00 110000.00 0.00

2.06 NON DSR Providing & fixing Auto Air vent for cold water supply risers,

suitable for pressure not less than 15 Kg/Sq.cm.

TOTAL FOR WATER SUPPLY 324163.00 1806.00

D) RAIN WATER WORK

4.01 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes.

4.02 12.42 Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A including jointing with seal ring

conforming to IS : 5382 leaving 10 mm gap for thermal

a) 12.42.2 Single Push fit coupler

b) 12.42.3 Single Tee with door

c) 12.42.5 Bend 87.5 Deg

d) 12.42.6 Shoe (Plain)

SI.No. DSR-2023/ Description of Item UNIT QUANTITY DSR-2023 MR RATE DSR AMOUNT MR

NON DSR RATE AMOUNT

4.03 12.44 Providing and fixing to the inlet mouth of rain water pipe cast Each 6 54.70 328.20 0.00

iron grating 15 cm diameter and weighing not less than 440

4.04 12.43 Providing and fixing unplasticised -PVC pipe clips of approved

design to unplasticised - PVC rain water pipes by means of

50x50x50 mm hard wood plugs, screwed with M.S. screws of

required length, including cutting brick work and fixing in cement

mortar 1:4 (1 cement : 4 coarse sand) and making good the wall

4.05 12.22 Making khurras 45x45 cm with average minimum thickness of 5 Each 6 298.25 1789.50 0.00

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1

cement : 3 coarse sand) and a coat of neat cement, rounding

the edges and making and finishing the outlet complete.

TOTAL FOR RAIN WATER WORK 39420.00 0.00

Construction of DIC Office Building and Modification / Renovation of Existing Office Building

at SAIL-DSP, Durgapur

Electrical Works

Sl. No. Descriptions Amount

1 TOTAL OF SCHEDULE ITEMS-( DSR-2022) (PART-A) 2,814,161.00

2 NON SCHEDULE ITEM

i) TOTAL OF NON SCHEDULE ITEMS (PART-B)(ELECTRICAL) 4,422,564.00

ii) TOTAL OF VARIABLE REFRIGERANT FLOW SYSTEM (PART-C) 3,630,421.00

iii) TOTAL SURVEILLANCE CCTV SYSTEM (PART-D) 486,642.00

iv) TOTAL TELEPHONE SOLUTION (PART-E) 266,938.00

v) TOTAL OF DATA NET WORKING SYSTEM (ACTIVE & PASSIVE COMPONENTS) 1,949,969.00

vi) TOTAL OF METAL RACE WAY (PART G) 700,896.00

TOTAL OF NON SCHEDULE ITEMS (PART B+C+D+E+F) 14,271,591.00

TOTAL OF SCHEDULE ITEMS & NON SCHEDULE ITEMS (PART 14,271,591.00

Construction of DIC Office Building and Modification / Renovation of Existing Office Building at SAIL-DSP, Durgapur

Electrical Works

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

A. DSR- 2022 SCHEDULE ITEMS (DSR-2022) (PART-A)

1 D.S.R 1.10 Point Wiring in Medium Class PVC Conduit, with Modular type

Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FR PVC insulated copper conductor single

core cable in surface/recessed Medium Class PVC conduit, with

modular type switch, modular plate, suitable size of GI box and

earthing the point with 1.5 sq.mm. FR PVC insulated copper

conductor single core cable etc as required. Make FRLS PVC CU

Wire:: Havells, Finolex Lap, KEI. (Make of Modular switch

Sockets:- Havells (ATHENA), L&T ENGLAZE), Legrand (LYNCUS)

, Anchor(WOODS), Schneider-(OPEL) PVC Conduit:- BEC AKG

2 D.S.R 1.11 Wiring for twin control light point with 1.5 sq.mm FR PVC Point 8 1,562.00 12,496.00

insulated copper conductor single core cable in surface/recessed

Medium Class PVC conduit, 2 way modular switch, modular plate,

suitable size of GI box earthing the point with 1.5 Sq. mm FR

PVC insulated copper conductor single core cable etc as

required. FRLS CU. Wire Make:- Havells, Finolex, Lap, KEI. (Make

of Modular switch Sockets:- Havells (New Murano), Legrand

(Myrius)) , ABB (Millenia), Schneider-(Zencello)

3 D.S.R 1.12 Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated Mtr. 500 334.00 167,000.00

copper conductor single core cable in surface/recessed Medium

Class PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated

copper conductor single core cable for loop earthing etc. as

required. Make:- Havells, Polycab, Finolex. Lap

4 D.S.R 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FR PVC insulated copper condcutor, single core

cable in surface/ recessed Medium Class PVC conduit as

required. Make:- Havells, KEI, Finolex Lap. PVC Conduit:- BEC

5 D.S.R 1.18 Telephone Wiring in Existing Conduit:- Supplying and

drawing, following pair, 0.5 sq.mm FR PVC insulated copper

conductor, unarmoured telephone cable in the existing surface /

recessed steel / PVC conduit as required.

6 D.S.R 1.21 S/F PVC Conduit: Supplying and fixing of following sizes of Med

Class PVP conduit along with the accessories in surface / recess

& cutting the wall and making good the same in case of recessed

conduit as required for TV and TEL out lets.

7 D.S.R. 1.22 Supply and fixing of Metal box following size (nominal Size) on

surface or recess with suitable size of phenolic laminated sheet

cover in front including painting etc as required. (to use as gang

1.22.1 75mmx75mmx60mm deep. Each 4 178.00 712.00

8 D.S.R. Supplying and fixing of following switch/ socket on the existing

1.24 modular plate & switch box including connections but excluding

modular plate etc. as reqd.

1.24.4 3 pin 5/6A socket outlet Each 80 122.00 9,760.00

1.24.5 6 pin 15/16 amp socket outlet Each 18 197.00 3,546.00

1.24.6 Telephone socket outlet Each 30 148.00 4,440.00

1.24.7 TV antenna socket outlet Each 1 148.00 148.00

9 D.S.R. Supplying and fixing Stepped type electronic fan regulator on Each 15 369.00 5,535.00

1.25 the existing modular plate & switch box including connections but

excluding modular plate etc. as reqd.

10 D.S.R. Supplying and fixing modular blanking plate on the existing Each 20 40.00 800.00

1.26 modular plate & switch box excluding modular plate as required.

11 D.S.R. Supply and fixing of following size/ modules, GI box along with

1.27 modular base & cover plate for modular switch/ regulator in

recess, including connection as required.

1.27.4 6 module (200mmx 75mm) (for 2 nos. 6A Sockets & 2no. 6A Each 50 402.00 20,100.00

12 D.S.R. Supplying and fixing suitable size GI box with modular plate and Each 20 477.00 9,540.00

1.31 cover in front on surface or in recess including providing and fixing

3 pin 5/6 Amp modular socket outlet and 5/6 A modular type

switch, connections painting etc. as reqd. (for Light plug point).

13 D.S.R. Supplying and fixing suitable size GI box with modular plate and Each 25 586.00 14,650.00

1.32 cover in front on surface or in recess including providing and fixing

6 pin 5/6 & 15/16 Amp modular socket outlet and 15/16 A

modular type switch, connections painting etc. as reqd.

14 D.S.R. Supplying & fixing of 3 pin, 5 amp Ceiling rose on the existing Each 250 87.00 21,750.00

1.33 junction box/ wooden block including connection as required.

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

15 D.S.R. Supplying and fixing call bell/buzzer suitable for single phase, 230 Each 7 99.00 693.00

1.38 V, complete as required.

16 D.S.R. Installation, testing and commissioning of Ceiling Fans, including Each 15 213.00 3,195.00

1.44 wiring the down rods of standard length (up to 30cm) with 1.5 Sq

mm FRLS PVC insulated copper conductor, single core cable and

earthing etc. as required.

17 D.S.R. Installation of exhaust fan in the existing opening, including

1.50 making good the damage, connection, testing, commissioning etc.

18 D.S.R 2.3 Supplying and fixing following way single pole & neutral, sheet

steel, MCCB distribution board, 240V, on surface/ recces ,

complete with tinned copper bus bar, neutral bar, earth bar, din

bar interconnections, powder painted including earthing etc. as

required (But without MCCB/RCCB/Isolator) Make:-SIEMENS-

Bitaguard, LEGRAND-Ekinox³-, SCHNEIDER-ACTI-9, L&T-AU

2.3.2 8 way Double door Each 1 2,573.00 2,573.00

2.3.3 12 way Double door Each 1 2,315.00 2,315.00

19 D.S.R 2.4 Supplying and fixing following way, horizontal type thee pole &

neutral, sheet steel, MCCB distribution board, 415V, on surface/

recces , complete with tinned copper bus bar, neutral bar, earth

bar, din bar interconnections, powder painted including earthing

etc. as required (But without MCCB/RCCB/Isolator) Make:-

SIEMENS-Bitaguard, LEGRAND-Ekinox³-, SCHNEIDER-ACTI-9,

20 D.S.R 2.5 Supplying and fixing of following ways surface/ recess mounting,

vartical type, 415 V, TPN MCCB/MCB distribution board of sheet

steel, dust protected, duly powder painted, inclusive of 200 A

tinned copper bus bar, common neutral link, earth bar, din bar for

mounting MCBs( but without MCCBs and incomer) as required.

(Note : Vertical type MCB TPDB is normally used where 3 phase

outlets are required.) Make:-SIEMENS-Bitaguard, LEGRAND-

Ekinox³-, SCHNEIDER-ACTI-9, L&T-AU

21 D.S.R 2.10 Supplying & fixing 5 amps to 32 amps rating 240/415 volts 10 kA,

C curve Miniature Circuit Breaker suitable for inductive loads of

following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required. (Make:-LEGRAND-

DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA GUARD/ L&T- AU

2.10.5 Triple Pole and neutral Each 5 1,228.00 6,140.00

22 D.S.R 2.14 Supplying & fixing following rating double pole (Single Phase &

Neutral) 240 V, Resudual Curren Circuit Breaker (RCCB) , having

a sensitivity current uo to 300mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-9/SIEMENS-

BETA GUARD/ L&T- AU VERSION.

23 D.S.R 2.18 Supplying and fixing of 20A 240V, SPN Industrial Type soclket out Each 20 1,621.00 32,420.00

let with 2 pole and earth, metal cenclosed plug top along with 20A

"C" Series SP MCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and

complete with connections, testing and commissioning etc. as

required. Make:- Legrand, L&T, Siemens, Schneider.

24 D.S.R 2.21 Providing & fixing of M.V. danger notice plate of 200 mm x 150 Each 2 269.00 538.00

mm, made of mild steel, at least 2 mm thick, and vitreous

enamelled white on both sides, and with inscription in single red

colour on front side as required.

25 D.S.R. EARTHING SYSTEM

i) 5.2 Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia including Each 3 6,855.00 21,472.00

accessories, and providing massonry enclosure with cover plate

having locking arragement and watering pipe etc. with

charcoal/cock and salt as required. (For LT Panels)

ii) 5.6 Earthing with copper Earth plate 600mm x 600mm x 6mm thick Each 4 13,838.00 55,352.00

including accessories, and providing masonary enclosure with

cover plate having locking arrangement and watering pipe of 2.7

Meter long etc. (with charcoal and salt as required). (for UPS &

iii) D.S.R. Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter below Mtr 10 144.00 1,440.00

5.9 ground/surface as strip earth electrode, including connection/

terminating with nut, bolt, spring, washer etc. as required (Jointing

shall be done by overlapping and with 2 sets of G.I. nut bolt &

spring washer spaced at 50 mm)

iv) D.S.R. Providing and fixing 4mm dia copper wire on surface or in recess Mtr 50 155.00 7,750.00

5.17 in 25 mm medium class PVC PIPE for loop earthing as required.

26 LIGHTNING CONDUCTOR

i) D.S.R. Providing and fixing of Lightning Conductor finial, made of 25 mm Each 6 518.00 3,108.00

6.2 dia 300mm ling, copper tube, having single prong at top, with 85

mm dia 3 mm thick copper base plate including holes etc.

complete as required.

ii) D.S.R. Providing and fixing G.I. Tape 20mmx3mm thick on parapat or Mtr 250 126.00 31,500.00

6.7 surface of the wall for lightning conductor complete as required.

(for Horizontal Run).

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

iii) D.S.R. Providing and fixing G.I. Tape 20mmx3mm thick on parapat or Mtr 80 197.00 15,760.00

6.8 surface of the wall for lightning conductor complete as required.

(for Vertical Run).

iv) D.S.R. Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia including Each 6 6,855.00 41,130.00

5.2 accessories, and providing massonry enclosure with cover plate

having locking arragement and watering pipe etc. with

charcoal/cock and salt as required.

v) D.S.R. Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter below Mtrs. 30 144.00 4,320.00

5.9 ground/surface as strip earth electrode, including connection/

terminating with nut, bolt, spring, washer etc. as required (Jointing

shall be done by overlapping and with 2 sets of G.I. nut bolt &

spring washer spaced at 50 mm).

27 D.S.R. Laying of I no. PVC insulated and and PVC sheathed /XLPE

7.1 power cable of 1.1 KV grade of following size direct in ground

including excavation snad cushioning, protective covering and

refilling the trench etc as required.

i) 7.1.4 Above 185 Sq. mm. and up to 400 Sq. mm Mtr 225 474.00 106,650.00

ii) D.S.R. Laying and fixing one no. PVC insulated and PVC sheathed /XLPE

7.7 power cable of 1.1 KV gade of following size on wall surface as

iii) 7.7.1. Up to 35 Sq mm (Clamped with 1 mm thick shadle) Mtr 65 55.00 3,575.00

iv) 7.7.2. Above 35 Sq mm and up to 95 Sq mm (Clamped with 25X3 mm Mtr 30 130.00 3,900.00

28 DSR 9.1 1.1 KV Cable End Termination:-Supplying and making indoor

cable end termination with brass double compression gland and

aluminium lugs for following size of PVC insulated XLPE Al. Ar.

Cable of 1.1 KV grade as required.

29 DSR 14.13 Providing, laying and fixing following dia G.I. pipe (medium class)

in ground complete with G.I. fittings including trenching (75 cm

deep)and re-filling etc. as required.

TOTAL OF SCHEDULE ITEMS-(DSR-2022) (PART-A) 2,814,161.00

NON SCHEDULE ITEMS (PART-B) (ELECTRICAL)

1 N.S. 10 KVA on Line 3 ph in and 3 ph out UPS

A) Supply, fitting, fixing, commissioning and testing 10 KVA True

Online Double Conversion UPS Stand alone, 3 phase in and 3

phase out with IGBT based rectifireand inverter along with n]inbuilt

isolation Transformer with 30 min. back up time Make UPS:-

Numeric (Legrand), APC (Schneider), Vertive(Emersion)

Supply, fitting, fixing and testing of 1 no. 10 KVA in parallel

redundant mode with SMF back-up batteries suitable for 30

minutes configuration with :- 415V, 3ph input & 3 ph output ON-

LINE UPS system backup protection for 30 minutes and all

standard accessories as required. The UPS will have in built

protection for ground fault, DC reverse polarity, DC over voltage

and current limitation, AC short circuit, AC over Voltage and

current limitation. The UPS technology should consists of high

double-conversion efficiency IGBT Based rectifier on line type

UPS.The details are as follows:-

Configuration of UPS :-

3 Phase input & 3 Phase output

The above mentioned on-line UPS must have following features

1) Upgradeability :- Suitable for paralleling up to 3 nos. of 10 KVA

UPS, and Should be upgradable to work as parallel redundant

UPS in load sharing mode.

2) Intelligent LCD display with event logging facility.

3) Double conversion.

4) Built in paralleling kit.

5) IGBT technology for Rectifier and Inverter.

6) Split Static, Manual & Maintenance Bypass.

7) Input power factor correction less than 0.95.

8) Input harmonic distortion less than 5% at 50% load. with the

application of IGBT(Insulated Gate By polar Transistor) based

rectifier, but 6/12 pulse is not applicable.

9) Software communication :- RJ-45 port to communicate with

BMS and Should be SNMP (Simple Network Management

protocol) compatibility.

10) Phase reverse sequence operation

11) Automatic static bypass

12) Maintenance Bypass.

13) Technology : Micro processor based controls, true online,

double conversion type, should have cold start facility.

14) Overall minimum Efficiency :>93.8 %

15) Isolation ;- Built inl isolation transformer at the output of UPS

16) Charger :- Should have built in charger of minimum 10 Amp.

(separate from rectifier)

17) IGBT bith side input and inverter side

18) SNMP Kit card.

19) Parallel Redundant Kit

20) Input phase correction kit.

21) Back-up time :- 30 min. with SMF Batteries.

Cost of 10 KVA ON LINE 3 Phase in and 3 Phase out UPS Set

B) SITC OF BATTERY AND ITS ACCESSORRIES

i) SITC of MS Battery Rack suitable for 10 KVA UPS

ii) Supply, fitting, fixing, commissioning and testing of 40/63Amp. DC

Breaker with UV relay Coil. Make:- L&T, Siemens, Schneider,

iii) Supply, fitting, fixing, commissioning and testingof 12V 42AH - 20

nos. Sealed Maitanace Free (SMF) Battery with 24 months

replacement guaranty. IS:1652:1991. (VAH Required 21600 for

10 KVA UPS (42AH x 20 Nos. x 12V = 10080 VAH) Make:-

Battery-Exide, Amar-Raja, Quantum.

Cost set of of SMF Batteries , Battery Leads, MS Rack & DC Set

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

Total Cost of one set 10 KVA UPS along with Battries and Set 1 496,217.00 496,217.00

asseccories (A+B)

2 N.S. MAIN LT PANEL

Supplying, designing, manufacturing, installation, un loading at

site, shifting to location, testing and commissioning in correct

alignment position, effecting proper connection of all incomer and

outgoing of Main Panel as per IS 86230 and IEC 60439 and

strictly as per technical specification for the said Main LT Panel of

the Campus. The said Main LT Panel shall be factory built floor

mounting with Base Channel size - 75 mm x 40 mm x 6 mm, (or

ISMB CHANNEL) IP-42, with proper lifting arrangement

completely modular and compartmentalized made of CRCA Sheet

of 2 mm thick (14 SWG) (Load and un load Bearing.)

The Panels should be Ethernet/ Modbus ready suitable for

monitoring and control with BMS System through Multifuction

meter and miroprocessor incoming feeders if required.

Panel builder shall include all necessary hardwares in their scope

to make LT panel ethernet ready and submit communication test

report during panel testing at shop floor.

The sheet steel under go minimum 7 tanks treatment followed by

finishing of powder coating of minimum 60 micron thickness, duly

compartmentalized having accessories mounted inside the cubical

panel, earthing with 2 Nos. earth studs.

LT Panel shall have 20% spare outgoing feeders for different

rating. The Panel shall be preferably arranged in multitier

formation. The size of the panel shall be designed in such a way

that the internal space is sufficient for hot air movement, and the

electrical component do not attain temperature rise more than 40

degree Celsius.

The LT Panel shall be totally enclosed, completely dust and

vermin proof. Synthetic rubber gaskets (neoprene/DPDM)

between all adjacent units and beneath all covers shall be

provided to render the joints dust proof. All doors and covers shall

be fully gasketed and shall be lockable. Doors shall have

concealed hinges. All the doors shall be suitably reinforced by

channel to provide rigidity. Panel shall have suitable cable entry

from bottom/Top and suitable arrangement for aluminum cable

The panel shall be provided with a thermostatically controlled

heating arrangement (200 W) to take care of high humidity

conditions. A 6/16A socket with switch as service outlet (single

phase) and 1 no. 10W LED LAMP with holder shall be provided in

one of the compartments as service outlet in the panel. The

complete panel shall be fuse less type, for control circuits 2A SP

MCB's to be used.

For the protection of equipment & feeders, switchgear shall be

provided with required O/C, S/C releases. Selection of switchgear

rating shall be made on the basis of load current & fault withstand

The LT Panel electrical infrastructure should be technically

superior and it should not be the cause of untoward incidences

like fire, electrical shock etc and if it happens the system should

be designed in such a way that it will trip the faulty section fast

and localize the fault and continuity of power should be ensured

in healthy sections. Fast fault localization will help to identify the

area, hence down time will be less and system can be made back

in fastest possible time.

SLD will be submitted by the contractor for approval to

Engineering Incharge/Consultant before submitting the Main

Panel drawing. Based on approved SLD, contractor will provide

the GA drawing of Panel. Inspection of the Panel shall be carried

out at Panel Builder's factory by the Consultant before final

delivery. (Panel Builder should follow all norms of as per IS 86230

All openings shall be covered by soft rubber gasket, enclosure

shall be galvanized. Panel shall have suitable cable entry from

bottom and suitable Bus arrangement for aluminum cables for all

AL. BUS BAR:- The Main LT Panel includes 415V, 500A, TPN AL.

Busbar 50Hz,busbars shall be made of high conductivity, and high

strength Aluminum E91 grade Busbars shall be of rectangular

cross sections , not more than 6mm thickness better suitable for

full load current for phase bus bars and half/ full rated current for

neutral bus bar or as stipulated in schedule of quantities. Busbar

shall be suitable to withstand the stresses of fault level as

specified in schedule of quantities removable glands plates, cable

glands at sending and receiving ends, including connection with

outgoing Feeders complete in all respects.

Location : IN PANEL ROOM /Near Stair

The Name Plate for each feeder must be in Anodized Aluminium

MCCB:- L&T-DSine/ LEGRAND-DPX³/SCHNEIDER-NSX/ SIMENS-

MCB- C Series 10kA _ Legrand- DX³/Schneider- ACTI-9/Siemens-

Beta Guard/ L&T- AU VERSION.

Panel Size - As per Drawing and shall be provided at the time of

All 4 pole MCCB with microprocessor based release must

have following characteristics:-

1. Pre alarm LED signal under over load.

2. Over heat signal when inernal temp. reaches 75 degree C.

3. Separate LED fault indicator for each fault.

4. Logic selectivity (inbuilt delay 0f 50 ms beteen upstream and

down stream breaker)

5. Adujustable neutral pole.

6. Non sensitive to temp. veriation.

7. Control of load (only selective one)

8. With positive Isolation Marked.

9. With 8 steps adjustable short circuit and over load current and

with earth fault indication.

10. Line load inerchangeable.

11. As per IEC 60947-2.

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

All 4 pole MCCB with thermomagnetic based release must

have follwing characterstics:-

1. Icu=100% Ics.

2. With positive Isolation Marked.

3. With adjustable short circuit and over load.

4. As per IEC 60947-2.

All Incomer and all out going feeders (up tp 100 A) shall have

ON/OFF/TRIP indications.

1 Set of Fabrication part of LT Panel & busbar system, with AL. Set

bus bar and interconnection FRLS cables) in 14 SWG (2 mm

Thick) CRCA Sheet Steel enclosure (IP-42) without components.

Name of Panel builders -Name of Panel builders:- EAP Kolkat,

Green Galaxy Kolkata, JMD, Kokar, Ranchi, Meditiron -Sidro, BIT

Meshra. SPC Electrotech , (PART A) (PANEL BUILDER MUST

HAVE CPRI APPROVAL)

9 Nos. LED indicatore (RYB) of 220V. 1 Set. (R Y-& B) with 2A Each

SP MCB protection. Make- Esbee/Schendier/Siemens/L&T /

3 Set Multifunction Meter having (5010 Series) LED mete display Set

accuracy Class 1 as per IEC 62053-21, should have an active RS-

485 port, in built RTC, Aux Supply: 44-277Vac/dc. Parameters:

Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs,

Onhrs Interrupts, THD for V&I per phase, individual harmonics for

V&I upto 15th level complying with IEC61557-12. Min/Max for

eight parameters. Sampling rate: 128 samples per cycle.

(provision for IP Convertor module, so that it can be integrated

with EMS/ BMS by the System Integrator) Make:-L& T 5010

Series/ SCCHEIDER-EM6400/ Legrand-EDMX3/CX3/PMX /Trinity

9 No. CT of different power as per incomer feeder 400/5VA -5 no

class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:- G&M / AE /

ECS / Kappa/Matrix

Bill of Material of MAIN LT PANEL

Provision of Auto interlocking between 400A/FP/50KA MCCB as

common incoming and 1 No. of 400A on load Automatic Change

over for 2 sources of supply , in such a way so that the two

supplies are not parallel at any time.

2 nos. 400A/FP/MCCB (50kA) with adjustable Microprocessor nos

release , with S/C, O/L & E/F protection, with ON OFF TRIP

indication alomg with extended front rotary handle and spreader

links including the provision of all components like UV, 4 poles

contactors etc, control cables for electrical interlocking the 2

incoming feeders ). (Feeder Cable Size :- 1 Run 3.5 C 300 SQ

MM AL. AR. Cable.)

1 no. 400A TPN , 415V, 3 Phase, on load Automatic Change over no

panel mounted open execution type with extended handle.

(Feeder Cable Size :- 1 Run 3.5 C 300 SQ MM AL. AR. Cable.)

Make:_Legrand / Schneider / Siemens / ABB / L&T

1 no. 400A/FP/MCCB (50kA) with adjustable Microprocessor no

release , with S/C, O/L & E/F protection, with ON OFF TRIP

indication alomg with extended front rotary handle and spreader

links. (including the provision of all components like UV, 4 poles

contactors etc., conrol cables, for electrical interlocking with auto

change over) ) As DG FEEDER. (AS DG IS WITH AMF PANEL

FOR THAT REQUIRED CONTROL CABLE TO SENCE EXISTING

AMF PANEL-Note:- Control Cable is in Clint's Scope) (Feeder

Cable Size :- 1 Run 3.5 C 300 SQ MM AL. AR. Cable.)

1 No.160 A F/P MCCB (50kA) with adjustable thermomagnetc no

release type with S/C & O/L protection, and front extended rotary

Handle and spreader links in both end Cable Size 3.5 C 95

Sq.mm Al,Ar, Cable)

8 nos. 63A F/P MCCB (25kA) with adjustable thermomagnetc no

release type with S/C & O/L protection, spreader links and front

5 nos. 25A F/P MCCB (25kA) with adjustable thermomagnetc no

release type with S/C & O/L protection, spreader links and front

2 nos. 32 A /DP/ MCB (10kA)/C Series. no

Total Cost of Main LT Panel. Set 1 908,793.00 908,793.00

3 N.S. LT PANEL FOR HVAC OUT DOOR & UINDOOR UNITS

Supplying, designing, manufacturing, installation, un loading at

site, shifting to location, testing and commissioning in correct

alignment position, effecting proper connection of all incomer and

outgoing of LT Panel for HVAC indoor and out door Units as per

IS 86230 and IEC 60439 and strictly as per technical specification

for the said LT Panel of the Campus. The said LT Panel shall be

factory built wall mounted with Base Channel size -35 mm x 35

mm x 4 mm, (or ISMB CHANNEL) IP-42, with proper lifting

arrangement completely modular and compartmentalized made

of CRCA Sheet of 2 mm thick (14 SWG) (Load and un load

Panel builder shall include all necessary hardwares in their scope

to make LT panel ethernet ready and submit communication test

report during panel testing at shop floor.

The Panels should be Ethernet/ Modbus ready suitable for

monitoring and control with BMS System through Multifuction

meter and miroprocessor incoming feeders if required.

The sheet steel under go minimum 7 tanks treatment followed by

finishing of powder coating of minimum 60 micron thickness, duly

compartmentalized having accessories mounted inside the cubical

panel, earthing with 2 Nos. earth studs.

LT Panel shall have 10% spare outgoing feeders for different

rating. The Panel shall be preferably arranged in multitier

formation. The size of the panel shall be designed in such a way

that the internal space is sufficient for hot air movement, and the

electrical component do not attain temperature rise more than 40

degree Celsius.

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

The LT Panel shall be totally enclosed, completely dust and

vermin proof. Synthetic rubber gaskets (neoprene/DPDM)

between all adjacent units and beneath all covers shall be

provided to render the joints dust proof. All doors and covers shall

be fully gasketed and shall be lockable. Doors shall have

concealed hinges. All the doors shall be suitably reinforced by

channel to provide rigidity. Panel shall have suitable cable entry

from bottom/Top and suitable arrangement for aluminum cable

The panel shall be provided with a thermostatically controlled

heating arrangement (200 W) to take care of high humidity

conditions. A 6/16A socket with switch as service outlet (single

phase) and 1 no. 10W LED LAMP with holder shall be provided in

one of the compartments as service outlet in the panel. The

complete panel shall be fuse less type, for control circuits 2A SP

MCB's to be used.

For the protection of equipment & feeders, switchgear shall be

provided with required O/C, S/C releases. Selection of switchgear

rating shall be made on the basis of load current & fault withstand

The LT Panel electrical infrastructure should be technically

superior and it should not be the cause of untoward incidences

like fire, electrical shock etc and if it happens the system should

be designed in such a way that it will trip the faulty section fast

and localize the fault and continuity of power should be ensured

in healthy sections. Fast fault localization will help to identify the

area, hence down time will be less and system can be made back

in fastest possible time.

SLD will be submitted by the contractor for approval to

Engineering Incharge/Consultant before submitting the Main

Panel drawing. Based on approved SLD, contractor will provide

the GA drawing of Panel. Inspection of the Panel shall be carried

out at Panel Builder's factory by the Consultant before final

delivery. (Panel Builder should follow all norms of as per IS 86230

All openings shall be covered by soft rubber gasket, enclosure

shall be galvanized. Panel shall have suitable cable entry from

bottom and suitable Bus arrangement for aluminum cables for all

AL. BUS BAR:- The LT Panel includes 415V, 200 A, TPN AL.

Busbar 50Hz,busbars shall be made of high conductivity, and high

strength Aluminum E91 grade Busbars shall be of rectangular

cross sections , not more than 6mm thickness better suitable for

full load current for phase bus bars and half/ full rated current for

neutral bus bar or as stipulated in schedule of quantities. Busbar

shall be suitable to withstand the stresses of fault level as

specified in schedule of quantities removable glands plates, cable

glands at sending and receiving ends, including connection with

outgoing Feeders complete in all respects.

Location : Inside Stair of terrace Floor.

The Name Plate for each feeder must be in Anodized Aluminium

MCCB:- L&T-DSine/ LEGRAND-DPX³/SCHNEIDER-NSX/ SIMENS-

MCB- C Series 10kA _ Legrand- DX³/Schneider- ACTI-9/Siemens- Set

Beta Guard/ L&T- AU VERSION.

1 Set of Fabrication part of LT Panel & busbar system, with AL. Each

bus bar and interconnection FRLS cables) in 14 SWG (2 mm

Thick) CRCA Sheet Steel enclosure (IP-42) without components.

Name of Panel builders -Name of Panel builders:- EAP Kolkat,

Green Galaxy Kolkata, JMD, Kokar, Ranchi, Meditiron -Sidro, BIT

Meshra. SPC Electrotech , (PART A) (PANEL BUILDER MUST

HAVE CPRI APPROVAL)

3 Nos. LED indicatore (RYB) of 220V. 1 Set. (R Y-& B) with 2A Set

SP MCB protection. Make- Esbee/Schendier/Siemens/L&T /

1 Set Multifunction Meter having (5010 Series) LED mete display no.

accuracy Class 1 as per IEC 62053-21, should have an active RS-

485 port, in built RTC, Aux Supply: 44-277Vac/dc. Parameters:

Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs,

Onhrs Interrupts, THD for V&I per phase, individual harmonics for

V&I upto 15th level complying with IEC61557-12. Min/Max for

eight parameters. Sampling rate: 128 samples per cycle.

(provision for IP Convertor module, so that it can be integrated

with EMS/ BMS by the System Integrator) Make:-L& T 5010

Series/ SCCHEIDER-EM6400/ Legrand-EDMX3/CX3/PMX /Trinity

9 No. CT of different power as per incomer feeder 160/5VA -5 nos

class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:- G&M / AE /

ECS / Kappa/Matrix

Bill of Material of LT PANEL

1 No.160 A F/P MCCB (50kA) with adjustable microprocessor Set

release type with S/C & O/L protection, with front extended rotary

Handle and spreader links in both end Cable Size :- 1 R, 3.5 C 95

Sq.mm Al,Ar, Cable)

3 nos. 63A F/P MCCB (25kA) with adjustable thermomagnetc set

release type with S/C & O/L protection, spreader links and front

3 Nos. 40A/FP/MCCB/10kA with adjustable thermomagnetc Set

release type with S/C & O/L protection, with spreader links and

front rotary handle, (1 nos. as spare).

1 Nos. 25 A FP MCCB (25KA) with adjustable thermomagnetc Set

release type with S/C & O/L protection, With spreader links and

front rotary handle, (1 nos. as spare).

Total Cost of HVAC VRV AC INDOOR & OUT DOOR UNITS LT Set 1 321,416.00 321,416.00

4 N.S. Supply of following size of 1.1KV XLPE / PVC Insulated / PVC

sheathed (Heavy Duty) armoured electric cable with aluminium

conductor as per IS 7098 (Part-1) 1988 with upto date

Amendments. Make:- As per approved Make List (Make:- Havell’s,

i) Supply of 3.5 Core 300 Sq. mm. XLPE PVC Al. / Ar. Cable 1.1 KV Mtr 200 3,020.00 604,000.00

ii) Supply of 3.5 Core 95 Sq. mm. XLPE PVC Al. / Ar. Cable 1.1 KV Mtr 30 1,039.00 31,170.00

iii) Cost of 3.5 Core 35 Sq. mm. XLPE PVC Al. / Ar. Cable 1.1 KV Mtr 75 455.00 34,125.00

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

5 N.S. Supply, fitting fixing and testing of 63A FP/10kA, C Series MCB Each 8 2,745.00 21,960.00

(Make:-MCB-LEGRAND- DX³/SCHNEIDER- ACTI-9/SIEMENS-

BETA GUARD/ L&T- AU VERSION.)

6 FANS & EXHAUST FANS

N.S. Suitable size & capacity Ceiling Fans/ Wall Fans (White/Off White

color) shall be provided as per the details given below. All Ceiling

fans shall be of 5 star rating and energy efficient. Similarly all wall

fans and Exhaust must be of best quality. Warranty for all fans

shoulkd be 2 years. Make:- Havells, Crompton, Usha,

i) N.S.i) Supply, fitting, fixing and testing of 1200mm sweep ceiling fans Each 15 5,277.00 79,155.00

complete without regulator, double ball bearing, motor, blades,

down rod, canopies, capacitor, suitable for operation on 230 volts,

50 Hz., 1 phase, AC supply connection with 1.5 sq.mm PVC FRLS

Copper wire complete as required, (BLDC 5 Star (32 Watt)

IS:374:2019 (energy efficient fan) . Colour of Ceiling Fan-

(White/Off White color)

ii) (N.S.v) Supply of Wall Fan 400mm 230V with blade, guard (net), Each 44 3,084.00 135,696.00

revolving type with regulator system and proper stand and fixing

bracke, (plastic body).

iii) (N.S.iii) Supply of 230V AC single phase, Exhaust Fan (230 mm- 1400 Each 11 2,261.00 24,871.00

RPM), double ball bearing (Metal Body, metalick blade, Light

Duty) exhaust fan as required.

iv) (N.S.iv) Supply of 230V AC single phase, Exhaust Fan (300 mm- 1400 Each 2 2,536.00 5,072.00

RPM), double ball bearing (Metal Body, metalick blade,- Light

Duty) exhaust fan as required.

7 N.S. LED LUMINAIRES LIGHTS

Note:- LED Luminaire manufacture shall provide LM79 report

from NABL accredited lab & LM80 report issued by LED

manufacturer. Samples of all type LED light fixtures are to be

submitted to the Engineering Incharge and each LED Light should

have 100lm/W for the approval prior to procurement of light

fixtures. Make:- K-Lite/ XAL/Ledvance/Philips /Wipro /Havells.

Make of LED Chip:- Philips/ Osram/Cree/Nichia.

N.S. Supply fitting fixing of follwing LED Light Fixtures :-

K - Lite make ID - 3322, Diva Deep Round 18 W CW Recessed Each 335 2,047.00 685,745.00

LED down Lighter.

K - Lite make ID - 3485, Trio 1200 mm. suspended Linear Light. Each 6 9,611.00 57,666.00

iii) Ledvance make LDVAL LINEAR SPOT 5X2W Recessed type. Each 50 3,175.00 158,750.00

K - Lite make ID - 3497, NEO Pendant Direct upto 40W, Length - Each 26 7,928.00 206,128.00

Ledvance make 15W/Mtr 24v with Driver Complete set, Length 5 Each 40 5,100.00 204,000.00

K - Lite make ID - 3612, Bema-7, 12W LED Round Surface Light Each 70 1,619.00 113,330.00

Decorative type Chandalier light with LED lamp Complete set. Each 1 22,250.00 22,250.00

vii) SITC of 2x12.5 W (25W) LED outdoor UP-DOWN light (Warm Each 12 10,658.00 127,896.00

Light) with IP:65 /IP-66 protection, die cast aluminium housing.

(LM 79 and LM 80 reports need to be submitted , 50,000 burning

hrs,) (Out DOOR USE) (make-Havells, Philips, K-lite, )

7 N.S Supply, fitting, fixing, installation & testing of Water storage 15 Each 14 13,166.00 184,324.00

Liters Geyser of BEE 5-star rating (Energy Efficient) vertical type

acralic rust free body, facility of temperature control ,with capillary

themostat and thermal cut, ISI certified heating element along with

inlet & outlet connecting pipe, fixing clamps, fasteners, etc. as

required. Make:- Venus / Bajaj / Havells

TOTAL OF NON SCHEDULE ITEMS (PART-B)(ELECTRICAL) 4,422,564.00

N.S. VARIABLE REFRIGERANT FLOW SYSTEM (PART-C)

1 N.S. Supply, Installation, Testing & Commissioning of Hi efficient DC

Inverter Side discharge VRF Outdoor units equipped with Variable

refrigerant flow system (Heating & Cooling), comprising Inverter

driven Scroll Compressor with a wide range of frequency from

15 to 120 rps ( R-410A refrigerant gas) . All the unit shall be

provided with micro- processor based control advance refrigerant

control , Liquid back flow protection , precise oil control

technology, 3ph DC motor condenser fan motor , subcooling

through dual tube heat exchanger & various electrical protection

like-phase sequence, high /low voltage protection ,compressor

overload protection, temperature & pressure protection.

Approved make : Fujitsu-General/ Mitsubishi Heavy/

A. OUT DOOR UNITS

i Nominal Capacity: 14 HP Nos. 1 450,666.00 450,666.00

ii Nominal Capacity: 12 HP Nos. 2 356,171.00 712,342.00

B. INDOOR UNITS

Supply of 4-Way Cassette type Indoor Unit with nominal capacty

3.5 TR, air flow not less than 1118 CFM & sound pressur level not

more than 46 db with Remote Grill kit &receiver kit.

Approved make : Fujitsu-

General / Mitsubishi Heavy / Panasonic.

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

ii Supply of 3D Flow Cassette type Indoor Unit with nominal capacty Nos. 5 125,127.00 625,635.00

2.0 TR, air flow not less than 612 CFM & sound pressur level not

more than 46 db with Remote, Grill kit &receiver kit.

Approved make : Fujitsu-

General / Mitsubishi Heavy / Panasonic.

iii Supply of 3D Flow Cassette type Indoor Unit with nominal capacty Nos. 2 123,310.00 246,620.00

1.5 TR, air flow not less than 512 CFM & sound pressur level not

more than 41 db with Remote, Grill kit &receiver kit.

Approved make :

Fujitsu-General / Mitsubishi Heavy / Panasonic.

C Supply of Y-Joints Nos. 10 7,139.00 71,390.00

Approved make : Fujitsu-General / Mitsubishi Heavy /

D Supply of ceiling mounted non-vrf 4-way Cassette with nominal Nos. 1 114,484.00 114,484.00

capacity 2.0 TR with non-CFC refrigerant, Cu condenser, Rotary

type compressor and DC fan motor with ambient temperature

operating range 21deg C ~ 52deg C with 360 degree turbo flow

along with corded/cordless remote.

Approved make: Fujitsu-General / Mitsubishi Heavy /

E Supply of ceiling mounted non-vrf 4-way Cassette with nominal Nos. 1 136,030.00 136,030.00

capacity 3.0 TR with non-CFC refrigerant, Cu condenser, Rotary

type compressor and DC fan motor with ambient temperature

operating range 21deg C ~ 52deg C with 360 degree turbo flow

along with corded/cordless remote.

Approved make: Fujitsu-General / Mitsubishi Heavy /

F SITC of Refrigerant Gas (R410a) Charging as per site Kgs. 30 1,752.00 52,560.00

requirements. Make : Dupont, Floron.

Installation, Testing and Commissioning of the VRF ODU/IDU with

cordless remote including lifting, shifting and complete with

insulation of all refigeration pipe joints

I VRF type ODU

12 HP (Heating and Cooling) Nos. 2 20,768.00 41,536.00

14 HP (Heating and Cooling) Nos. 1 24,922.00 24,922.00

II VRF type IDU

i 3.5 Tr 4-way Cassette Unit Nos. 6 4,543.00 27,258.00

ii 2.0 Tr 3D flow type Cassette Unit Nos. 5 4,543.00 22,715.00

iii 1.5 Tr 3D flow type Cassette Unit Nos. 2 4,543.00 9,086.00

III NON-VRF type Cassette units

G SITC of VRF Refrigerant Piping,

Supply Installation and Testing of Refrigerant pipe with 19mm/13

mm thick) closed cell elastomeric nitrile rubber tubular insulation

between each set of indoor & outdoor units complete with

necessary connecting Y joints and other accessories as per

specifications, all Refrigerant Pipe Should Run on cable trays of

required Size and should be complete with Supports ,Hangers etc.

Make- Rajco/Mandev.

i 28.6 mm O.D.(with 19 mm insulation ) Rmtr. 40 1,882.00 75,280.00

ii 22.2 mm O.D.(with 19 mm insulation ) Rmtr. 10 1,233.00 12,330.00

iii 19.05 mm O.D.(with 19 mm insulation ) Rmtr. 15 1,012.00 15,180.00

iv 15.8 mm O.D.(with 19 mm insulation ) Rmtr. 70 994.00 69,580.00

v 12.7 mm O.D.(with 13mm insulation ) Rmtr. 85 844.00 71,740.00

vi 9.52 mm O.D.(with 13mm insulation ) Rmtr. 40 714.00 28,560.00

vii 6.35 mm O.D.(with 13mm insulation ) Rmtr. 20 467.00 9,340.00

H SITC of Non-VRF refrigerant Piping

Supply, Installation, Testing and Commissioning of Cu ref Pipe for Rmtr. 25 1,272.00 31,800.00

non-vrf Cassette type Units

I SITC of rigid PVC Drain Piping complete with fittings, supports as

per specifications and duly insulated with 6 mm thick closed cell

nitrile rubber insulation. Make-Supreme,Astral,Finolex,

J SITC of control cum transmission wiring of Copper conductor

cable along with conduit for looping between indoor & outdoor

VRF system . Make- Lapp/ Belden.

i 2 C X 1 Sq. mm Shielded for VRF Rmtr. 225 247.00 55,575.00

ii 4C X 2.5 Sqmm for Non-VRF Rmtr. 40 319.00 12,760.00

K SITC of Anti Vibration Rubber Pad. Lot 1 11,163.00 11,163.00

L SITC of OD Bracket for cassette Units Nos. 2 1,233.00 2,466.00

M Supply and Fabrication of MS platform for VRF type OD unit Kg. 75 228.00 17,100.00

N Lifting Shifting of outdoor units Lot 1 26,998.00 26,998.00

O SITC of Suction Filter & Ball Valve for ODU. Make : Dafoss, Nos. 3 13,629.00 40,887.00

TOTAL OF VARIABLE REFRIGERANT FLOW SYSTEM (PART-C) 3,630,421.00

1 N.S. (SURVEILLANCE CCTV SYSTEM) (PART-D)

i) 2MP IP IR Bullet Camera

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

SITC of 2MP EPOE IP IR BULLET CCTV CAMERA HAVING Nos. 0 34,586.00 0 ITEM NOT

FOLLOWING FEATURES: EPOE SUPPORT; EFFECTIVE CONSIDERTD ,

PIXELS: 1920(H) X 1080(V); MINIMUM SAME WILL BE

ILLUMINATION:0.006LUX/F1.4 COLOR,1/3S,30IRE); PROCURED

0.05LUX/F1.4 ( COLOR, 1/30S, 30IRE);0LUX/F1.4 (IR ON); IR SEPARATELY.

DISTANCE: DISTANCE UP TO 50M (164FT); LENS

TYPE:MOTORIZED; FOCAL LENGTH: 2.7MM~13.5MM; OPTICAL

ZOOM: MIN 5X; VIDEOCOMPRESSION: H.265+/H.265/

H.264+/H.264; VIDEO RESOLUTION: 1080P(1920X1080)/

FRAME RATE: MAIN STREAM: 1080P(1~50/60FPS);BIT RATE:

H.264: 24~9472KBPS H.265: 14~5632KBPS; AUDIO

COMPRESSION:G.711A/ G.711MU/ AAC/ G.726; ETHERNET: RJ-

45 (10/100BASE-T);INTEROPERABILITY: ONVIF, PSIA, CGI;

VIDEO INTERFACE: 1 PORT; AUDIOINTERFACE: 1/1 CHANNEL

IN/ OUT; POWER SUPPLY: DC12V, POE (802.3AF)(CLASS0);

INGRESS PROTECTION: IP67; ACCESSORIES INCLUDED:

COMPATIBLE POWERSUPPLY ADAPTER WITH 3A RATING,

MOUNTING STAND, COMPATIBLE MOUNTINGSTAND, 64 GB

CLASS 10 MICRO SD CARD, 2 NOS. RJ-45 CONNECTORS

WITH BOOTS. PREFERED MAKE: HIKVISION/ HONEYWELL/

ii) 2MP IP IR Dome Camera:

SITC of 2MP IP IR FIXED VF DOME CCTV CAMERA HAVING Nos. 0 31,763.00 0 ITEM NOT

FOLLOWING FEATURES: EFFECTIVE PIXELS: 1920(H) CONSIDERTD ,

X1080(V); MINIMUM ILLUMINATION: 0.006LUX/ F1.4 SAME WILL BE

(COLOR,1/3S,30IRE); 0.05LUX/F1.4 (COLOR,1/ 30S,30IRE); PROCURED

0LUX/F1.4(IR ON); IR DISTANCE: DISTANCE UP TO 30M(98FT); SEPARATELY.

LENS TYPE: MOTORIZED; FOCAL LENGTH: 2.7MM~13.5MM;

VIDEO COMPRESSION:

H.265+/H.264+/H.265/H.264/MJPEG(SUB STREAM);

CIF(352×288/352×240); FRAME RATE: MAIN STREAM: 1080P(1

~ 25/30FPS); BIT RATE: H.265: 12K ~ 6400KBPS,H.264: 32K ~

10240KBPS; AUDIO COMPRESSION: G.711A/ G.711MU/ AAC/

G.726; ETHERNET: RJ-45 (10/ 100BASE-T);

INTEROPERABILITY: ONVIF PROFILE S&G, API; POWER

SUPPLY: DC12V, POE (802.3AF)(CLASS 0); OPERATING

CONDITIONS:-30° C ~ +60° C / LESS THAN 95% RH; INGRESS

PROTECTION: IP67; ACCESSORIES INCLUDED: COMPATIBLE

POWER SUPPLY ADAPTER WITH 3A RATING,COMPATIBLE

MOUNTING STAND, 64 GB CLASS 10 MICRO SD CARD, 2 NOS.

RJ-45 CONNECTORS WITH BOOTS.

PREFERED PREFERED MAKE: HIKVISION/ HONEYWELL/

iii) IP PTZ CAMERA

SITC of 2MP IP IR PTZ CAMERA WITH 64GB CLASS 10 MICRO Nos. 0 117,876.00 0 ITEM NOT

SD CARD HAVING FOLLOWING FEATURES: EFFECTIVE CONSIDERTD ,

PIXELS: 1920X 1080;MINIMUM ILLUMINATION: COLOR- SAME WILL BE

0.005 LUX; IR DISTANCE: UPTO 150M; FOCAL LENGTH: PROCURED

MINIMUM 4 MM; PAN SEPARATELY.

RANGE: 0 DEG TO 360 DEG ENDLESS; TILT RANGE: -15 DEG

TO 90 DEG; OPTICAL ZOOM: 30X; VIDEO COMPRESSION:

H.265+/H.265/H.264+/H.264; AUDIO COMPRESSION:

G.711A/G.711U/AAC; NETWORK: RJ-45 (10 BASE-T/100 BASE-

T); INTEROPERATIBILITY: ONVIF/PSIA/CGI; USER: MINIMUM

20; POWER SUPPLY: AC 24V/3A, POE+-802.3AT; OPERATING

CONDITIONS: -10DEG C TO 60 DEG C; INGRESS

PROTECTION: IP66 OR BETTER; ACCESSORIES INCLUDED:

COMPATIBLE POWER SUPPLY ADAPTER WITH 3A RATING,

COMPATIBLE MOUNTING STAND, 64 GB CLASS 10 MICRO SD

CARD, 2 Nos. RJ-45 CONNECTORS WITH BOOTS.

/HIKVISION/HONEYWELL/CP PLUS/ TYCO.

iv) . 32 Channel NVR Processor :-

SITC OF Dual-core embedded processor,Operating System : Pre- No. 0 172,649.00 0 ITEM NOT

loaded Licensed OS,IP Camera Support : Min 32 Channel or CONSIDERTD ,

higher,Two way talk : 1 Channel O/P and 1 Channel SAME WILL BE

I/P,Compression : H.265, H.264, MJPEG4,Video Resolution: PROCURED

Should support up to 8MP IP Camera. Video Recording (Incoming SEPARATELY.

bandwidth) : 256 Mbps,Video Display Split : 1/4/8/16/32,Video

Loss : Support,Camera Blank : Support,Alarm Input/ Output : Min

16 channel / Min 4 Channel or betterHard Disk : Min 8 SATA ports

, up to 32TB , Raid(Redundancy), ,Smart Phone : iPhone, iPad,

Android, Windows,Phone,Protocol : IPv4/IPv6, HTTP, HTTPS,

SSL, TCP/IP,UDP, UPnP, ICMP, IGMP, SNMP,RTSP, RTP,

SMTP,NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter,ONVIF

Profile S,User Account : 10 Users,Trigger Event : Recording,

Alarm, Video Push, Email,FTP,Recording Mode : Manual ,

Schedule , STOP,Search Mode : Time/Date , Alarm , Motion

Detection ,Exact Search (accurate to second), Smart

Search,Playback : Play, Stop, Pause, Rewind, Fast Play, Next file,

Previous file, Next Camera, Previous Camera, Full Screen,

Backup Selection,Backup Mode : USB Device / Internal SATA /

NetworkInterface Ports : 2 USB 2.0 , 1 RS485 , 1,RS232, 2

RJ45,Ethernet Ports : 2 RJ-45 port (10/100M/1000M),Power SITC

: AC 100V~240V 50/60Hz,Regulatory : CE, FCC,UL and RoHS.

Web viewer, CE, FCC, UL certified capable of Survelliance SD

Crad , and 32 TB storage. Make- /Hikvision/Pelco/ Honeywell /CP

v) 9 U WALL MOUNT EQUIPMENT RACK

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

SITC of of 9 U Wall Mounted EQUIPMENT Cabinet No. 1 14,470.00 14,470.00

504.65X600X500 (HXWXD): Rack must be along with the

following components like; Width (mm)-600, Depth (mm) - 500,

Approx.Net Wt (kg) - 10-12, CRCA 'D' Grade thickness (mm) - 1.2,

RAL 9017 (Matt Black), Glass - 4mm Toughened Tinted Glass

Door, Accessories:, Cooling Fan (230V A/C 90 CFM) - 2 Nos,

PDU 230VAC - 1 No, Cable Manager Metal- 2 Nos, Mounting

Hardware (20 sets of M6 screws,washer,cage nuts (nickel

coated)) - 1 No, Wall Screws (4 sets of 2'' screws, washer,rubber

grommet (nickel coated)) - 1 No, Door Lock - 1 No, Front Metal

Band -1 No. In the rack there must be maintained 1 U = 1.75

inches space. (Make : Legrand-VALRACK/ Netrack/Rittal/APW.)

(vi) SITC of SITC of 55" Full HD 1080p LED Panel; 24X7 Surveillance No. 0 90,595.00 0 ITEM NOT

Monito Make-As per Approved DBR make list.or Sony, LG, CONSIDERTD ,

Panasonic SAME WILL BE

vii) SITC of Surveillance class UHS-1 U3 -64 GB /Class 10 Micro SD Set 0 7,440.00 0 ITEM NOT

CARD ( V-30 ) for Camera. CONSIDERTD ,

viii) SITC OF Windows Surveillance Hard Disk (ST10000VX0004) Each 0 36,302.00 0 ITEM NOT

Capacity:- 8 terabyte (TB), Wattage:- 6.2, Operating Temperature:- CONSIDERTD ,

0 to +60 degree C. (1.7TB per camera for 30 days) (Make: SAME WILL BE

Seagate, WD, HP) PROCURED

ix) Patch Panel 24 Port for CAT-6 Cable:-

SITC of UTP Cat. 6 patch panels (Compartible for Armrmoured Set 1 20,893.00 20,893.00

CAT-6 Cable) equipped with 24 RJ 45 connectors 19" panel - 1U ,

Equipped with 4 cassettes of 6 pre-fitted Cat. 6 LCS³ RJ 45

connectors, Automatic cassette removal by simple pressure,Each

connector can be removed individually,T568A and B marking with

colour codes,Equipped with rear cable guide to hold cables during

maintenance,Supplied with coloured labels,Compliant with

ISO/IEC 11 801, EN 50173 and ANSI/TIA 568 standards,Flat

panels,24 RJ 45 connectors - 1U - PoE++ UTP ,Equipped with

new-generation Quick-Fix for automatic (screwless) mounting on

enclosure and cabinet uprights,Universal mounting on all cabinets

or enclosures,Panels ensure automatic earthing of each

connector, equipped with 4 bundles guides fixed at the rear.

(Make:-Legrand /Commscop/ RIT/Bendel

x) Supply fitting, fixing, and testing of Cat. 6 RJ 45 patch cords and no. 1 649.00 649.00

user cords ,RJ 45/RJ 45 - straight,With special “easy grip” plug

Compliant with ISO/IEC 11 801, EN 50173 and ANSI/TIA 568

standards, Shielded UTP, impedance 100 Ω,PVC,Length CAT6A

UTP Patch Cord - LSZH - 2mtr - Red, boot bioth end ; (Make:-

Legrand /Commscop/ RIT/Belde

xi) Supply fitting, fixing, and testing of BLUE/YELLOW color C of Nos. 24 424.00 10,176.00

Cat. 6 RJ 45 patch cords and user cords ,RJ 45/RJ 45 -

straight,With special “easy grip” plug Compliant with ISO/IEC 11

801, EN 50173 and ANSI/TIA 568 standards, Shielded UTP,

impedance 100 Ω,PVC, Length 1 mtr boot both end, for Rack

End.; (Make:-Legrand /Commscop/ RIT/Belde

xii) Providing, fixing, fitting, connecting and testing of 2 module white Each 12 706.00 8,472.00

RJ 45 Cat 6 Data outlet / (CAMERA END) Toolless information

outlets with white coloured RJ-45 transparent shuttered modular

scoket outlets with front plate. ETL verified to meet or exceed TIA

/ EIA category 6 requirements, universal wiring label permitting to

either T568A or T568B, UL listed, and B marking with colour

codes, for computer networking complete in all respect suitable to

fix in modular plate type switch system with connections as

required and Compiance with ISO/IEC 11 801, EN 50173 and

ANSI/TIA 568 standards. (Make:- Legrand- Arteor/Scheinder-

Zencelo/ Mk- Blenz)

xiii) SITC of Armoured CAT 6 UTP Cable for CCTV,Performance 500 Mtr 600 176.00 105,600.00

MHz, 4 pairs or 2x4 twisted pair cables, 100 Ω,Yellow RAL

1018,LSZH sheath: zero halogen. ANSI/TIA colour

code,Compliant witISO/IEC 11 801, EN 50173 and ANSI/TIA 568

standards,Products conforming to the new CPR regulation ,F/UTP

- 4 pairs,Length 500 m,Supplied on reel, :,Yellow : (to be drawn in

existing 25 mm PVC conduit or existing metal floor race way.)

Make:_ Belden, Legrand, Tyco, Digisol

xiv) L2 PoE Access Switch

Supply, fitting, fixing, connecting and testing of switch with 24 x 4X10 Gbps SFP for

10/100/1000T ports and (4x10 Gbps SFP+ Port for up linking) , uplinking should be

Switching Capacity 56 Gbps and Forwarding Rate 41.7Mpps, included.

Switch should support PoE and PoE+ with 370W minimum power (Inducted )

budget, operaating temperature 0°C to 50°C, Switch should

support link reccovery within 50ms for Ring architecture, SDN or

similar kind of technolgy should support, Warranty 5 year from

Day 1 . Make:- Cisco / Allied Telesis / Juniper)

The above L2 Managed Data Switch consists of the following:-

1. Power cord India, right angle.

2. Both side Cable connector.

3. 1 year free service pack.

Interface- 24 x 10/100/1000T ports and (4x10 Gbps SFP+ Port

for up linking)

Switching Capacity/Forwarding Rate :- 56Gbps/41.7Mpps

Performance:- Up to 16K MAC addresses, 256MB DDR SDRAM

Management:- Console port, GUI, Telnet, SSH,SNMPv1,2 and 3,

powerful centralized management and zero-touch device

installation and recovery like SDN,

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

Security:- Console port, GUI, Telnet, SSH,SNMPv1,2 and 3,

powerful centralized management and zero-touch device

installation and recovery like SDN,

Routing:- IPv4 static routing and RIP.

Fail-over:- Switch capable of recovery within 50ms in a ring for

application high availability

IPv6:- Device management over IPv6 networks with SNMPv6,

Telnetv6, SSHv6 and Syslogv6

Diagnostic:- Optical Digital Diagnostics Monitoring,Automatic link

flap detection and port shutdown,Port and VLAN mirroring

Standard Protocol:- IEEE 802.1Q,IEEE 802.1w,IEEE 802.1s,IEEE

802.1p,IEEE 802.1AB,IEEE 802.1AX,IEEE 802.3ad

Operating Temparature:- 0°C to 50°C

Certification:- EN,UL and RoHS

Warranty:- 5 Years.

Cost of L2 PoE Access Switch Set 1 209,988.00 209,988.00

xv) Supply of Fiber Module 1310nm 10G Base-LR SFP module; The Nos. 2 58,197.00 116,394.00

detailed specification in Annexure 1 of this module is a part a

necessary part of the BOQ

xvi) Works Station-

SITC of Works Station- - i7-7700-WP/8GB+8GB/1TB/RWD+ - Set 0 296,454.00 0 ITEM NOT

AWT3630 Intel® CoreTM i7-8700/ 8GB/ 1TB/ Windows 10 Pro/ CONSIDERTD ,

19" Monitor/ DVDRW/ 3 years/ 2 GB Nvidia Graphics/ mDP Port/ SAME WILL BE

450W. Make:- Dell/Lenovo/HP PROCURED

xvii) SITC of Video Management Server on industry standard Server Set 0 317,630.00 0 ITEM NOT

and should be of the same OEM as of the camera as per the CONSIDERTD ,

detailed specification attached to the BOQ with license . Make:- SAME WILL BE

Hickvision/Honeywell/Sony/CP-Plus. PROCURED

TOTAL SURVEILLANCE CCTV SYSTEM (PART-D) 486,642.00

TELEPHONE SOLUTION (PART-E)

1 N.S. Krone box:-

Providing, fixing, connecting & testing of Krone box (Telephone

Tag Block) in a thermoplastic, IP 65 (weather proof) enclosure,

internally embedded gasket, anti corrosive, insulated and shock

proof with provision for cable through IP 65 glands complete in all

respects. (Make : Matrix/Alcatel/Avaya.

i) 10 pair Tag Block (krone Box) (136 mm x 253 mm x 115 mm) No. 2 1,073.00 2,146.00

ii) 20 pair Tag Block (krone Box) (136 mm x 253 mm x 115 mm) No. 2 1,238.00 2,476.00

iii) 50 pair Tag Block (krone Box) (300 mm x 300 mm x 70 mm) No. 2 2,228.00 4,456.00

iv) SITC of IPM with lightning protection. No. 15 237.00 3,555.00

2 N.S. Providing, laying, connecting, testing & commissioning of

telephone Unarmoured cables of conductor size 0.5 sq.mm.

high conductivity Solid Annealed Bare tinned Copper Telphone

cable (with ferrule) with high density Polythene insulation, Paired,

Polyester and seathed with high Oxygen Index, Fire Retradant,

PVC Compound, Gey Outer Sheath generally confirming ITD

Specification, laid on existing cable tray or along the wall or laid

through under floor chanel (Metal floor Race Way) as required.

(Make : Finolex / Polycab / Havells)

i) Cost of 5 pair Telephone Unarmoured cables of conductor size 0.5 Mtr 750 73.00 54,750.00

3 N.S. Providing, laying, connecting, testing & commissioning of Jelly

Filled telephone Unarmoured cables of conductor size 0.5

sq.mm. high conductivity Solid Annealed Bare Tinned Copper

Telphone cable (With Ferule) with high density Polythene

inssulated, petrolium Jelly Filled with Ploy Al. laminated Moisture

Barrier, ,Paired, Polythene seathed, unarmoured Polythene

Jacketed Telephone cable as per DOT Specification, laid on

existing cable tray or along the wall or laid through under floor

chanel (Metal floor Race Way) as required. (Make : Finolex /

Polycab / Delton /Commscope)

i) Cost of 10 pair PIJF UNARMOURED 10 PAIR TELEPHONE Mtr 1000 195.00 195,000.00

4 N.S. Providing, laying, connecting, testing & commissioning of Jelly

Filled telephone Armoured cables of conductor size 0.5 sq.mm.

high conductivity Solid Annealed Bare Copper Telphone cable

with high density Polythene inssulated, petrolium Jelly Filled with

Ploy Al. laminated Moisture Barrier, ,Paired, Polythene seathed,

unarmoured Polythene Jacketed Telephone cable as per DOT

Specification, laid on existing cable tray or along the wall or laid

through under floor chanel (Metal floor Race Way) as required.

(Make : Finolex / Polycab / Delton/Commscope)

i) Cost of 10 pair Te. Cable (1 Mtr.) Jelly Filled telephone Armoured Mtr 0 276.00 0.00

ii) Cost of 20 pair Te. Cable (1 Mtr.) Jelly Filled telephone Armoured Mtr 0 422.00 0.00

iii) Cost of 50 pair Tel. Cable. (1 mtr.) Jelly Filled telephone Mtr 5 911.00 4,555.00

Armoured cables

5 N.S. Digital Key Telephone Set

SITC OF DIGITAL KEY TELEPHONE WITH FULL DUPLEX

SPEAKERPHONE, 6 LINE BACKLIGHT LCD DISPLAY, 24

PROGRAMMABLE KEYS INCL. ALL ACCESSORIES WITH THE

FOLLOWING FEATURES:

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

FOR ON HOOK AND OFF HOOK CHANGEOVER DURING Set 0 21,091.00 0.00 ITEM NOT

CONVERSATION (HANDSET TO HANDS FREE OPERATION CONSIDERTD ,

AND VICE VERSA) SPEECH SHOULD NOT GET CUT AND SAME WILL BE

CONTINUE NORMALLY, SHOULD WORK ON SINGLE PAIR (2 PROCURED

CORE) 0.5 MM DIA COPPER TELEPHONE CABLE, AT LEAST 6 SEPARATELY.

LINES LCD DISPLAY, ON HOOK DIALING, AT LEAST 24

NUMBERS PROGRAMMABLE / ONE TOUCH KEYS WITHOUT

ANY ADDITIONAL PROGRAMMABLE KEY MODULE (ADD ON

MODULE), ICMCALLI NG, VOICE / VOLUME, RINGER

CONTROL KEYS (HANDS FREE INCREASE / DECREASE,

MICROPHONE, SPEAKER, MUTE), CALL HOLD FACILITY,

CONFERENCE AND DND KEYS, CLI : SHOULD SUPPORT

BOTH DTMF & FSK MODE. I/C CALLER¿S NAME & NUMBER

DISPLAY FROM INTERNAL AND EXTERNAL CALLERS, INDI

CATE BUSY EXTENSION, CALL FORWARDING (ALL, BUSY, NO

ANSWER), DATE & TIME DISPLAY ( 24-HOUR / 12-HOUR

FORMAT), FACILITY TO RETRIEVE I NCOMING,

ANSWERED,MISSED CALLS, CALL LOG, REDIAL FACILITY,

SPEED DIAL, ONE TOUCH DIALING TO INTERNAL AND

EXTERNAL PHONE NUMBERS, CO KEYS : TO ACCESS CO

LINES,RINGER LAMP, WORK ON TELEPHONE LINE VOLTAGE

ONLY AND NO EXTERNAL ADAPTORPrevious Camera, Full

Screen, Backup Selection,Backup Mode : USB Device / In

6 N.S. DIGITAL SELF LABELLING SOFTKEY TELEPHONE /IP Phone

SITC OF DIGITAL SELF LABELLING SOFT KEY TELEPHONE/IP Set 0 25,382.00 0.00 ITEM NOT

Telphone WITH FULL DUPLEX SPEAKER PHONE, 6 LINE CONSIDERTD ,

BACKLIGHT LCD DISPLAY, 24 PROGRAMMABLE KEYS, SELF SAME WILL BE

LABELLING SOFT KEY DISPLAY WITH MINIMUM 4 LINES PER PROCURED

PAGE INCL. ALL ACCESSORIES WITH THE FOLLOWING SEPARATELY.

FEATURES: FOR ON HOOK AND OFF HOOK CHANGEOVER

DURING CONVERSATION (HANDSET TO HANDS FREE

OPERATION AND VICE VERSA) SPEECH SHOULD NOT GET

CUT AND CONTINUE NORMALLY. SHOULD WORK ON SINGLE

PAIR (2 CORE) 0.5 MM DIA COPPER TELEPHONE CABLE, AT

LEAST 6 LINES LCD DISPLAY, ON HOOK DIALING, AT LEAST

24 NUMBERS PROGRAMMABLE / ONE TOUCH KEYS

WITHOUT ANY ADDITIONAL PROGRAMMABLE KEY MODULE

(ADD ON MODULE), ICM CALLING, VOICE / VOLUME, RINGER

CONTROL KEYS (HANDS FREE INCREASE / DECREASE,

MICROPHONE, SPEAKER, MUTE), CALL HOLD FACILITY,

CONFERENCE AND DND KEYS, CLI : SHOULD SUPPORT

BOTH DTMF & FSK MODE. I/C CALLER’S NAME & NUMBER

DISPLAY FROM INTERNAL AND EXTERNAL CALLERS

(ALPHANUMERIC DISPLAY), INDICATE BUSY EXTENSION,

CALL FORWARDING (ALL, BUSY, NO ANSWER), DATE & TIME

DISPLAY (24-HOUR / 12-HOUR FORMAT), FACILITY TO

RETRIEVE INCOMING, ANSWERED, TO INTERNAL AND

EXTERNAL PHONE NUMBERS, CO KEYS: TO ACCESS CO

LINES, RINGER LAMP, WORK ON TELEPHONE LINE VOLTAGE

ONLY AND NO EXTERNAL ADAPTOR SHOULD BE USED,

COLOUR: WHITE (PREFERRED). Make:- NEC /Panasonic/Alcatel.

7 N.S. IP based KTS (EPBX) system –

SITC of MULTILINE KEY TELEPHONE SYSTEM WITH VOIP Set 0 513,854.00 0.00 ITEM NOT

AND TRADITIONAL VOICE SUPPORT. RACK MOUNTABLE, CONSIDERTD ,

NORMALLY SHOULD WORK ON 230 VOLT AC. THE SYSTEM SAME WILL BE

SHOULD BE INCLUDED WIIH MDF & LSA PLUS PROCURED

DISCONNECTION MODULE, INTEGRATED PROTECTION SEPARATELY.

MODULES, 16U FLOOR MOUNTED RACK WITH WHEELS AND

OTHER REQUIRED ACCESSORIES. THE SYSTEM SHOULD

INCLUDE SEALED MAINTENANCE FREE BATTERY AS POWER

BACK UP (AT LEAST FOR 02 HOURS) IN CASE OF AC POWER

OUTAGE. THE SYSTEM SHOULD HAVE BUILT IN CHARGER

FOR CHARGING THE BATTERY.SUPPLY OF BATTERY, MDF

AND FLOOR MOUNTED 16 U RACK WITH WHEELS AND ALL

ACCESSORIES & CONSUMABLES OF THE SYSTEM IS UNDER

THE SCOPE OF THE SUPPLIER. ALL NECESSARY LICENSING

FACILITY FOR RUNNING DIFFERENT FEATURES SHOULD BE

INCLUDED IN THE SUPPLIERS SCOPE.OPERATING

ENVTRONMENT: TEMPERATURE - 5 TO 40 DEGREE C,

HUMIDITY - 10 To 90 % (NON CONDENSING). 2. IT SHOULD BE

POSSIBLE TO INTEGRATE THE SYSTEM TO NETWORK OF

DIFFERENT EXCHANGES OF DIFFERENT MAKE/

TECHNOLOGIES USING EITHER ISDN/PRI/ E-1 LINES,

ANALOG TRUNKS ETC. THE EXCHANGE SHOULD WORK ON

ANY TYPE OF PUBLIC EXCHANGE OR SIMILAR NETWORK TO

WHICH IT IS INTEGRATED /INTERFACED WITHOUT

REQUIRING ANY MODIFICATION IN THE NETWORK. 3.

CONFIGURATION: CLI BASED (FSK & DTMF) ANALOG

EXTENSION PORT: 8, CLI BASED (FSK & DTMF)DIGITAL

EXTENSION PORT: 24, CLI (FSK & DTMF) BASED ANALOG CO

TRUNK PORT: 24 (CONVERSION OF PORTS USING DTMF TO

FSK OR FSK TO DTMF CONVERTER NOT ALLOWED). SHOULD

SUPPORT'IP'EXTENSIONS. 4. DIGITAL AND ANALOG

EXTENSIONS OF THE SYSTEM SHOULD WORK OVER

STNGLE PAIR (2 CORE)0.5 MM DIA COPPER TELEPHONE

CABLE UPTO 5OO AND IOOO METERS DISTANCE

RESPECTIVELY. SYSTEM ADMINISTRATION: THROUGH

TOTAL OF TELEPHONE SOLUTION (PART-E) 266,938.00

DATA NET WORKING SYSTEM (PART-F)

1 N.S. PASSIVE COMPONENTS Make:- Legrand/ Actassi / Corning /

Siemon / Panduit

i) 15 U WALL MOUNT Network Rack

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

Wall Mounted 15 U Rack:- Supply of Fully Loaded 15 U 19"

500*600 Wall Mounted Rack with all required accessories - ,6A 6

Plug PDU-1 Nos. ,Cable Manager-2 Nos., Mounting Screws-20

Pcs ; , Pro Tek Wall Mount - 15U - 600W - 500D - Double Fan

Provision - Black Fine Tex.- 3nos , Single Fan For Wall Mount-

3nos., Metal Cable Manager - 01U - Plastic Cable Loop's

Mountable - Black Fine Tex. - Assembly Preffered , Power

Distribution Unit - 06/16 Amp Universal - 06 Socket - 16 Amp

Switch with Indicator - 06 Amp Fuse - 06/16 Amp 3 Pin Plug with

Power Cable 0.75 sq.mm 1.5 meter Length - Black Fine Tex. –

Assembly, Mounting Hardware Packet { Containg 1 Nos Each Of 3

} - 20 Set . (Make : Legrand / Net-Rack/ APW).

Cooling Fan (230V A/C 90 CFM) - 2 Nos

PDU 230VAC - 1 No,

Cable Manager Metal - 3 Nos,

Earthing Strips 150mm H - 1 No,

Mounting Hardware (20 sets of M6 screws,washer,cage nuts

(nickel coated)) - 1 No, Wall Screws (4 sets of 2'' screws,

washer,rubber grommet (nickel coated)) - 1 No,

Door Lock - 1 No

Front Metal Band -1 No

In the rack there must be maintained1 U = 1.75 inches space.

Cost of Wall Mounted 15 U Rack 2 27,613.00 55,226.00

ii) 27 U (Floor Mounted -Server Rack)

SITC of 27 U floor standing network enclosure should be

designed for servers, networking, data centres and telecom

applications. Vented top cover with fan mounting provision, front

glass or perforated metal door with lock and key. Back vented,

perforated or perforated dual metal door with lock and key. Free

floor standing design with 4 Castor wheels having 2 wheels with

brakes and 2 wheels without brakes. There should be 4 fans of

360CFM. Power distribution unit with two numbers of dual input,

vertically mounted, 230 volt, with 32amps MCB and having 25

power outputs of 6/16 amps sockets, with vertical & horizontal

cable managers. Clearance should be taken from EA before

supply of material regarding product standard, specification.

Installation of the Network Enclosure is to be done as per standard

practices in DSP and direction of EA. Transportation of the item

and supply of accessories for erection are to be done by the

contractor free of cost. Preffered makes - APW/ RITTAL/

VALRACK /Netrack

Approx. Wt.120 Kg,

CRCA 'D' grade 1.6mm thick sheet, pwoder coated for cabinet

4mm Toughened Tinted Glass Door

Along with following accessories:-

1. Cooling fan 220/230V AC, of 360 CFM-------4 Nos.

2. Cable manager Metal 4 Nos.

3. PDU- 230V /AC 1 No.

4. Cable Channel 100mm wide. 2 Nos.

5. Heavy Duty Stationary Shelf 600mm(W)X800mm(D) -1 No.

6. Mounting Hardware (20 Sets of M-6 screws, washers, cage,

nuts (Nickle Coated)- 3 Nos.

Back vented, perforated or perforated dual metal door with lock

7. Earthing strips copper 150mm H 1 No.

8. Door Lock 1 No.

9. Caster Wheels (with breake) 2 Nos. (Free Floor

Standing Design)

10. Caster Wheels (without breake) 2 Nos.

11. Front Metal Band 1 No.

12. 1 no 32 Amps DP MCB and 25 nos. power outputs of 5/15

amps sockets, with vertical & horizontal cable managers.

13. Clearance should be taken from EA before supply of material

regarding product standard,

Cost of 27 U Server Rack Set 1 84,701.00 84,701.00

iii) Patch Panel 24 Port for CAT-6A Cable:-

SITC of UTP Cat. 6A patch panels equipped with 24 RJ 45 Nos. 3 20,893.00 62,679.00

connectors 19" panel - 1U , Equipped with 4 cassettes of 6 pre-

fitted Cat. 6A LCS³ RJ 45 connectors, Automatic cassette removal

by simple pressure,Each connector can be removed

individually,T568A and B marking with colour codes,Equipped with

rear cable guide to hold cables during maintenance,Supplied with

coloured labels,Compliant with ISO/IEC 11 801, EN 50173 and

ANSI/TIA 568 standards,Flat panels,24 RJ 45 connectors - 1U -

PoE++ UTP ,Equipped with new-generation Quick-Fix for

automatic (screwless) mounting on enclosure and cabinet

uprights,Universal mounting on all cabinets or enclosures,Panels

ensure automatic earthing of each connector, equipped with 4

bundles guides fixed at the rear. (Make:-Legrand /Commscop/

iv) Supply fitting, fixing, and testing of Cat. 6A RJ 45 patch cords and Nos. 60 649.00 38,940.00

user cords ,RJ 45/RJ 45 - straight,With special “easy grip” plug

Compliant with ISO/IEC 11 801, EN 50173 and ANSI/TIA 568

standards, Shielded UTP, impedance 100 Ω,PVC,Length CAT6A

UTP Patch Cord - LSZH - 2mtr - Red ; Boot Both End. (User End)

(Make:-Legrand /Commscop/ RIT/Optronix.

v) Supply fitting, fixing, and testing of Cat. 6A RJ 45 patch cords and Nos. 60 424.00 25,440.00

user cords ,RJ 45/RJ 45 - straight,With special “easy grip” plug

Compliant with ISO/IEC 11 801, EN 50173 and ANSI/TIA 568

standards, Shielded UTP, impedance 100 Ω,PVC,Length CAT6A

UTP Patch Cord - LSZH - 2mtr - Red ; Boot Both End. (User End)

(Make:-Legrand /Commscop/ RIT/Optronix.

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

vi) Providing, fixing, fitting, connecting and testing of 2 module white Nos. 60 706.00 42,360.00

RJ 45 Cat 6A Data outlet / Toolless information outlets with white

coloured RJ-45 transparent shuttered modular scoket outlets with

front plate. ETL verified to meet or exceed TIA / EIA category 6

requirements, universal wiring label permitting to either T568A or

T568B, UL listed, and B marking with colour codes, for computer

networking complete in all respect suitable to fix in modular plate

type switch system with connections as required and Compiance

with ISO/IEC 11 801, EN 50173 and ANSI/TIA 568 standards.

(Make:- Legrand- Arteor/Scheinder- Zencelo/ Mk- Blenz)

vii) Providing, drawing, connecting and testing of 6 Core un armoured Mtr 0 136.00 -

unitube Single Mode OS2, OFC (Fiber Optics cable) from wall

mounted rack to server room Rack,i,e Rack to Rack Connectivity)

in existing heavy duty 25 mm PVC Pipe/existing Tray,for indoor

connectivity M (Make:- Legrand /Amp/ Tyco) Hanutech) (INDOOR

CONNECTIVITY) (RACK TO RACK)

viii) Providing, Laying, connecting and testing of 6 Core Armoured Mtr 150 254.00 38,100.00

unitube Single Mode OS2 OFC (Fiber Optics cable 6 F) for

Outdoor connectivity. Armored fiber Optic Cable shall be laid in

existing underground in HDPE pipes with suitable Manholes for

easy pulling and proper Maintenance and in door in existing floor

raceway. (Out Door Connectivity)

ix) Providing, fixing, connecting and testing of Modular of 24 port Each 3 12,677.00 38,031.00

loaded LIU SC- (Single Mode) type. (Make:- Legrand

/Commscop/ RIT/Molex.)

x) Providing, fixing, connecting and testing of 3 Duplex SM 9/125 SC Each 3 1,211.00 3,633.00

adapter plate. (Make : Legrand/Benden/ Commscop/Molex.

xi) Providing, fixing, fitting, connecting and testing of SC- Pigtial 1 Each 3 774.00 2,322.00

Mtr 10 GB -9/125, MM (Make:- Legrand /Commscop/ RIT

xii) Providing, fixing, fitting, connecting and testing of SC/LC duplex Each 3 2,931.00 8,793.00

Fiber Patch cords OS1/OS2 of 2 Mtrs. Length PC. . (Make:-

Legrand /Commscop/ RIT

xiii) Providing, fixing, fitting, connecting and testing of OS1/OS2 Each 10 3,382.00 33,820.00

SC/SC duplex Fiber patch cords 2 mtr, PC (Make:- Legrand

xiv) Providing, fixing, fitting, connecting and testing of Splice Tray - 24 Each 3 2,626.00 7,878.00

Fiber Capacity. Make:- Legrand /Commscop/ RIT

xv) SITC of Cat. 6A unarmoured cables for local networks, Mtr 1500 102.00 153,000.00

Performance 500 MHz, 4 pairs or 2x4 twisted pair cables, 100

Ω,Yellow RAL 1018,LSZH sheath: zero halogen. ANSI/TIA colour

code,Compliant witISO/IEC 11 801, EN 50173 and ANSI/TIA 568

standards,Products conforming to the new CPR regulation ,F/UTP

- 4 pairs,Length 500 m,Supplied on reel, :,Yellow : (to be drawn in

existing 25 mm PVC conduit or existing metal floor race way.)

Make:- Benden, Optronix, Legrand, Commscop

xvi) SITC of Cat. 6A armoured cables for local networks,Performance Mtr 2500 147.00 367,500.00

500 MHz, 4 pairs or 2x4 twisted pair cables, 100 Ω,Yellow RAL

1018,LSZH sheath: zero halogen. ANSI/TIA colour

code,Compliant witISO/IEC 11 801, EN 50173 and ANSI/TIA 568

standards,Products conforming to the new CPR regulation ,F/UTP

- 4 pairs,Length 500 m,Supplied on reel. (to be drawn in existing

25 mm PVC conduit or existing metal floor race way.) Make:-

Benden, Optronix, Legrand, Commscop

xvii) Splicing of SM/MM Fibre Optics Cable: Splicing, testing and Core 50 168.00 8,400.00

commissioning of supplied, OFC cable of 6-Core Fibre Optics

1 N.S. ACTIVE COMPONENTS

i) L2 PoE Access Switch

Supply, fitting, fixing, connecting and testing of switch with 24 x 4x10 Gbps SFP for

10/100/1000T ports and (4x10 Gbps SFP+ Port for up linking) , uplinking should be

Switching Capacity 56 Gbps and Forwarding Rate 41.7Mpps, included

Switch should support PoE and PoE+ with 370W minimum power (INDUCTED )

budget, operaating temperature 0°C to 50°C, Switch should

support link reccovery within 50ms for Ring architecture, SDN or

similar kind of technolgy should support, Warranty 5 year from

Day 1 . Make:- Cisco / Allied Telesis / Juniper)

The above L2 Managed Data Switch consists of the following:-

1. Power cord India, right angle.

2. Both side Cable connector.

3. 1 year free service pack.

Interface- 24 x 10/100/1000T ports and (4x10 Gbps SFP+ Port

for up linking)

Switching Capacity/Forwarding Rate :- 56Gbps/41.7Mpps

Performance:- Up to 16K MAC addresses, 256MB DDR SDRAM

Management:- Console port, GUI, Telnet, SSH,SNMPv1,2 and 3,

powerful centralized management and zero-touch device

installation and recovery like SDN,

Security:- Console port, GUI, Telnet, SSH,SNMPv1,2 and 3,

powerful centralized management and zero-touch device

installation and recovery like SDN,

Routing:- IPv4 static routing and RIP.

Fail-over:- Switch capable of recovery within 50ms in a ring for

application high availability

IPv6:- Device management over IPv6 networks with SNMPv6,

Telnetv6, SSHv6 and Syslogv6

Diagnostic:- Optical Digital Diagnostics Monitoring,Automatic link

flap detection and port shutdown,Port and VLAN mirroring

Sl. No. Item Code. Description DSR Amount in

Unit Qty. DSR-2022 Rate MR Rate MR Amount in Rs. Remarks

Standard Protocol:- IEEE 802.1Q,IEEE 802.1w,IEEE 802.1s,IEEE

802.1p,IEEE 802.1AB,IEEE 802.1AX,IEEE 802.3ad

Operating Temparature:- 0°C to 50°C

Certification:- EN,UL and RoHS

Warranty:- 5 Years.

Cost of L2 PoE Access Switch Set 3 209,988.00 629,964.00

.(ii) SITC of Fiber Module 1310nm 10G Base-LR SFP+ module; The Nos. 6 58,197.00 349,182.00

detailed specification in Annexure 1 of this module is a part a

necessary part of the BOQ

TOTAL OF DATA NET WORKING SYSTEM (ACTIVE & PASSIVE 1,949,969.00

COMPONENTS) (PART-F)

METAL RACE WAY (PART G)

MR Metal/GI Raceway:- SITC of following compartmental Raceways-

Metal/GI for Screed floors, Should be IP20-IK08 for distributing LV

and ELV cabling in screed floors particularly suitable for

appalications requiring EMC screening, should be pre-galvanised

sheet 275 GSM coating with thickness of 1.5 mm with bolted

construction might be combined with junction boxes or floor boxes

for wiring devices, fixing and coupler accessories, should consisit

of body and cover, cover can be fitted on to the body with screws

and can be opened easily if required as per IEC 61534-22. Make:-

Legrand, Optronix, Cope

i) 225 x 38 mm 3 compartment raceways - Data & IP-TEL, Power Mtr 30 2,605.00 78,150.00

ii) 150 x 38 mm 1 compartment raceways . Mtr 50 1,800.00 90,000.00

iii) 150 x 25 mm 1 compartment raceways . Mtr 100 1,659.00 165,900.00

iii) 100 x 25 mm 1 compartment raceways . Mtr 50 1,518.00 75,900.00

iv) 50 x 25 mm 1 compartment raceways . Mtr 50 1,235.00 61,750.00

2 MR coupler for joining metal raceways :- SITC of coupler for joining Nos. 19 120.00 2,280.00

metal raceways 38mm for Screed floors, can be fitted on to the

body of the raceways with screws. Make:- Legrand, Optronix, Cope

3 MR Bracket:- SITC of fixing bracket for metal raceways of following -

sizes for Screed floors, can be fitted on to the body of the

raceways with screws and the floor. Make:- Legrand, Optronix.,

i) 225 x 38 mm fixing bracket Nos. 26 144.00

ii) 150 x 38 mm fixing bracket Nos. 14 76.00 1,064.00

4 MR Junction Box:- SITC of Back box for Screed Floor with Screed Nos. 6 5,121.00 30,726.00

Thikness 50 mm to 70 mm , IP 44 junction boxes for tiles/marble

should Conforms to IEC/EN 60670-23 , Compatible with screed

floor system. (225x225x65-90mm) Make:- Legrand, Optronix,

5 MR Floor Box with LID & Trim for screed floor:- SITC of Floor access Nos. 17 10,497.00 178,449.00

box with LID & Trim for Tiles /Marbles Grey cover RAL 1019 for 3

compartment floor box with flexible cable exits need to installed in

backbox for screed floor system. (hi- Adjustable 225x225x65-

90mm) Make:- Legrand, Optronix, Cope

6 MR Support Plates for Floor Boxes :- SITC of Support Plates for Nos. 17 981.00 16,677.00

Floor Boxes 77 mm width waved support Plates for 4 Modules(2 x

2) -03 Nos. set for each floor Boxes. Make:- Legrand, Optronix,

TOTAL OF METAL RACE WAY (PART G) 700,896.00

TOTAL OF NON SCHEDULE ITEMS (PART B+C+D+E+F+G) 11,457,430.00

TOTAL OF SCHEDULE ITEMS & NON SCHEDULE ITEMS 14,271,591.00

(PART A+B+C+D+E+F)

Construction of DIC Office Building and Modification / Renovation of Existing Office Building at SAIL-DSP, Durgapur

REPAIRS & RENOVATION WORKS OF EXISTING DIC BUILDING

Sl. No. Reference DESCRIPTION UNIT QTY. Amount

1 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of

steel bars and disposal of unserviceable material within 50 metres lead as per

direction of Engineer - in- charge. Cum 13.99 3551.25 49,667.78

2 15.7.4 Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-charge. In cement mortar

3 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter

including chowkhats, architrave, holdfasts etc. complete and stacking within 50

3.1 15.12.1 Of area 3 sq. metres and below Each 5.00 367.20 1,836.00

3.2 15.12.2 Of area beyond 3 sq. metres Each 5.00 502.75 2,513.75

4 15.13 Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

4.1 15.13.1 Of area 3 sq. metres and below Each 5.00 143.50 717.50

4.2 15.13.2 Of area beyond 3 sq. metres Each 5.00 188.90 944.50

5 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

5.1 15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 92.46 113.35 10,480.34

6 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

approved municipal dumping ground or as approved by Engineer-in-charge,

beyond 50 m initial lead, for all leads including all lifts involved.

7 4.1.5 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level : 1 :3:6 (1 Cement : 3

coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate

size derived from natural sources) Cum 1.20 7294.70 8,753.64

8 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103

to accelerate / retard setting of concrete, to improve durability and workability

without impairing strength; including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades

of concrete. Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the cement content in

design mix is more than 110% of the specified minimum cement content, the

contractor shall have discretion to either re-design the mix or bear the cost of

extra cement All works above plinth level upto floor V level.

Concrete of M25 grade with minimum cement content of 330 kg /cum

9 5.9.21 Lintels, beams, plinth beams, girders, bressumers and

cantilevers with water proof ply 12 mm thick Sqm 16.50 841.95 13,892.18

10 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level. Thermo-

Mechanically Treated bars of grade Fe-500D or more. Kg 151.88 107.85 16,379.72

11 6.34.2 Brick work with non modular fly ash bricks conforming to IS:12894, class

designation 10 average compressive strength in super structure above plinth

level up to floor V level in : Cement mortar 1:6 (1 cement

12 13.4.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Sqm 300.00 343.65 103,095.00

Sl. No. Reference DESCRIPTION UNIT QTY. Amount

13 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5

(1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster

14 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or dash fastener shall be paid

for separately). Second class teak wood Cum 0.28 142949.70 39,454.12

15 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to

shape with hooked ends in R.C.C. slabs or beams during laying, including

painting the exposed portion of loop, all as per standard design complete.

TOTAL CIVIL WORKS 1,090,912.86

TOTAL 1,090,913

Construction of DIC Office Building and Modification / Renovation of Existing Office Building at SAIL-DSP,

ADDRESSABLE FIRE DETECTION & ALARM SYSTEM

SR. NO. ITEM DESCRIPTION UNIT QTY. MR RATE AMOUNT

1 Addressable SMOKE DETECTOR with base Nos. 132 2,183.00 288,156.00

2 Addressable LOOP SOUNDER/HOOTER with base Nos. 4 5,315.90 21,263.60

3 RESPONSE INDICATOR Nos. 40 112.10 4,484.00

4 Addressable 1 LOOP PANEL Nos. 2 81,272.50 162,545.00

5 Addressable MANUAL CALL POINT Nos. 4 4,106.40 16,425.60

6 1.5 X 2 Core Copper Armoured Cable Rmt. 1000 135.70 135,700.00

7 Junction Box Nos. 50 259.60 12,980.00

8 Installation, Testing & Commissioning of the system Job 1 70,800.00 70,800.00

TOTAL AMOUNT 712,354.20

TOTAL AMOUNT 712,354.20