Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAdmitted-Finance | ₹5.8 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Goyal Savitri Industries L1 |
|---|---|---|---|---|
| 1.00 | Supply and fixing of Overhead/cantilever type XI retro reflective sign plate made out of 3 mm thick Aluminium composite panel, faces to be covered with green type XI retro reflective sheeting and the matter & logo with overlay film type of sheating after the etching treatment of aluminium sheeting. The backside of sheeting should becovered with two coats of epoxy/powder coating. This sheet shall be fixed on a frame of 40x40x5 angle iron. | 75.6 | Sqm | 3,862 ₹2,91,967.2 Lowest |
| 2.00 | Supply of steel structure in single section.Built upsection/frame from M.S. black pipes ( medium duty) as per IS-1239 (part-1) 1979 with connecting plate anchor bolts including cutting, welding, bolting, fixing in position and applying primer coat of approved steel primer and two coats of synthetic enamel paint including foundation bolts. | 2.6 | MT | 52,262 ₹1,35,881.2 Lowest |
| 3.00 | Foundation work of foundation in RCC 1:2:4 including excavation, reinforcement, shuttering, backfilling & removal of excess earth as per drawing. | 2 | Nos | 14,962 ₹29,924 Lowest |
| 4.00 | Erection of cantilever sign board and structure with movable gantry cranes including nut bolting and fixing. | 2 | Job | 3,062 ₹6,124 Lowest |
| 5.00 | Providing and fixing of retro-reflectorised Signs made of cube corner Micro Prismatic grade retro reflective sheeting conforming to Type XI standards of IRC 67‐2012 and ASTM D4956‐09, covered with Electro Cuttable translucent film as per the drawing and display matter given by the engineer in charge. The retro reflective sheeting shall be fixed over 2 mm thick aluminum sheet and and riveted using 6mm aluminium rivets all arounds to back support frame of MS angle 40 x 40 x 5 mm. This structure has fixing Provision to 2 Nos. posts of M.S. pipe 75mm OD Median duty (with hole fast of size 30 to 40 cm at bottom) and 2 Nos. post for back support to frame (duly painted in alternate bands of 25 cm. black and white with 2 coats of superior quality of synthetic enamel paint and duly welded to backframe of the sign plate firmly fixed to the ground by means of properly designed foundation with M 20 grade cement concrete minimum 60 cm X 60 cm X 90 cm below ground level as per approved drawing including labor and hire charges for machineries involved etc., complete as per Technical Specification clause 801 and as directed by the engineer. Boards Size 3.660 X 2.440 mtr | 1 | Each | 55,000 ₹55,000 Lowest |
Tender Value
₹8.5 L
EMD Value
₹17,083
Closing Date
4 Jun 2026, 6:00 pmClosed
Sr DGM Bhilwara
RIICO Bhilwara
Providing and Fixing of Cantilever Sign Boards and Guide Map at industrial area Textile Park Ruaheli Bhilwara
2026_RIICO_562077_3
riico/bhl/2026-27/11
Open Tender
Civil Works
Item Rate
60 days
RIICO Bhilwara
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,180
RIICO
₹17,083
19 Jun 2026
25 May 2026
5 Jun 2026
25 May 2026
4 Jun 2026
25 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and fixing of Overhead/cantilever type XI retro reflective sign plate made out of 3 mm thick Aluminium composite panel, faces to be covered with green type XI retro reflective sheeting and the matter & logo with overlay film type of sheating after the etching treatment of aluminium sheeting. The backside of sheeting should becovered with two coats of epoxy/powder coating. This sheet shall be fixed on a frame of 40x40x5 angle iron. | 1 | Sqm | 6,000 | ₹5,994 |
| 2 | Supply of steel structure in single section.Built upsection/frame from M.S. black pipes ( medium duty) as per IS-1239 (part-1) 1979 with connecting plate anchor bolts including cutting, welding, bolting, fixing in position and applying primer coat of approved steel primer and two coats of synthetic enamel paint including foundation bolts. | - | MT | 63,000 | - |
| 3 | Foundation work of foundation in RCC 1:2:4 including excavation, reinforcement, shuttering, backfilling & removal of excess earth as per drawing. | - | Nos | 15,000 | - |
| 4 | Erection of cantilever sign board and structure with movable gantry cranes including nut bolting and fixing. | - | Job | 5,000 | - |
| 5 | Providing and fixing of retro-reflectorised Signs made of cube corner Micro Prismatic grade retro reflective sheeting conforming to Type XI standards of IRC 67‐2012 and ASTM D4956‐09, covered with Electro Cuttable translucent film as per the drawing and display matter given by the engineer in charge. The retro reflective sheeting shall be fixed over 2 mm thick aluminum sheet and and riveted using 6mm aluminium rivets all arounds to back support frame of MS angle 40 x 40 x 5 mm. This structure has fixing Provision to 2 Nos. posts of M.S. pipe 75mm OD Median duty (with hole fast of size 30 to 40 cm at bottom) and 2 Nos. post for back support to frame (duly painted in alternate bands of 25 cm. black and white with 2 coats of superior quality of synthetic enamel paint and duly welded to backframe of the sign plate firmly fixed to the ground by means of properly designed foundation with M 20 grade cement concrete minimum 60 cm X 60 cm X 90 cm below ground level as per approved drawing including labor and hire charges for machineries involved etc., complete as per Technical Specification clause 801 and as directed by the engineer. Boards Size 3.660 X 2.440 mtr | - | Each | 98,000 | - |
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
Textile.pdf
Tender Documents • 0.19 MB
BoardCond.PDF
Additional Documents • 1.14 MB
BOQ_1000161.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].