NOTICE INVITING TENDER FOR THE SUPPLY OF VALVES

SWING CHECK VALVE, STAINLESS STEEL, BOLTED COVER TYPE. SIZE:- 8" X 150#, END CONNECTION: FLANGED AS PER ANSI B 16.5. MOC:- (1) BODY- A351 CF8. (2) COVER- A351 CF8. (3) SEAT WELD (4) DISC-A351 CF8. (5) HINGE- A351 CF8. (6) GASKET- SPIRAL WOUND METALLIC AISI-304 FILLED WITH ASBESTOS. (7) HINGE PIN AND DISC NUT- A351 CF8. (8) COVERSTUD AND NUT- AISI-304 / AISI-303. VALVE SPECIFICATION:- (1) WALL THICKNESS AND GENERAL WALL DESIGN AS PER API-600. (2) PRESSURE AND TEMPERATURE RATING AS PER ANSI B 16.34. (3) INSPECTION AND TESTING AS PER BS-1873 / API-598. NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

CHECK VALVE, SWING TYPE WITH BOLTED BONNET SIZE: 4 INCH X 300#; ENDS: FALNGED ENDS WITH LARGE GROOVE MOC: (1) BODY & COVER: ASTM A352 Gr. LCB (2) BODY SEAT RING: AISI 304 (3) DISC: AISI 304 (4) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER (5) HINGE PIN: AISI 304 (6) BONNET BOLTS & NUTS: A320 Gr.L7 & A194 Gr. 2H COMPLIANCE STANDARDS: (1) DESIGN STANDARD: API 600 (2) FACE TO FACE DIMENSIONS: ANSI B16.10 (3) FLANGE DRILLING: ANSI B16.5 (4) PRESSURE & TEMPERATURE RATING: ANSI B16.34 (5) INSPECTION & TESTING: API 598 NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

SS 304 BALL VALVE, FULL BORE, THREE PIECE DESIGN, LEVER / HANDLE OPERATED, QUARTER TURN SHUT-OFF SIZE: 2" NB X 300#; END CONNECTION: SOCKET WELDED MOC: (1) BODY: ASTM A 351 Gr. CF8, (2) BALL: AISI 304 (3) BALL SEAT & STEM SEAL: PTFE (4) STEM: AISI 304 (5) LEVER: SS 304 (6) FASTENERS: SS304 COMPLIANCE STANDARD: (1) VALVE DESIGN: BS 5351 (2) INSPECTION & TESTING: API 598 (3) DIMENSIONAL STANDARD: ASME B16.10 NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

GATE VALVE WITH BOLTED BONNET, OUTSIDE SCREW & YOKE; SIZE: 8" NB X 150#; ENDS: FLANGED (RAISED FACE SERRATED) MOC: (1) BODY & BONNET: ASTM A 216 GR WCB, (2) STEM: ASTM A182 GR. F6a, (3) SEAT RING: ASTM A 105 + HARDFACED WITH STELLITE #6 (API TRIM #5), (4) DISC / WEDGE : ASTM A 216 GR WCB + HARDFACED 13% CR STEEL (API TRIM #5), (5) BONNET GASKET:SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE: ASTM A439 TYPE D2 (7) GLAND & GLAND BUSH: ASTM A 105. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: HARDFACED 13% CR STEEL (API TRIM#5), (10) BONNET BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H, (11)GLAND BOLTS / EYE BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H; (12) HAND WHEEL : DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10; FLANGE DRILLING: AS PER ANSI B 16.5; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598. NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

GATE VALVE WITH BOLTED BONNET OUTSIDE SCREW & YOKE SIZE: 3 INCH X 300# ENDS: FLANGED (RAISED FACE WITH SERRATIONS) MOC: (1) BODY & BONNET: ASTM A351 CF8 (2) STEM: ASTM A275 TYPE304 (3) SEAT RING: ASTM A182 F304 (4) DISC/WEDGE: ASTM A351 CF8, (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER (6) GLAND & GLAND BUSH: ASTM A276 TYPE 304 (7) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS (8) BACK SEAT: ASTM A182 F304 (9) FASTENERS: ASTM A 193 GR B8 & ASTM A 194 GR 8 COMPLIANCE STANDARDS: (1) DESIGN STANDARD: API 600 (2) FACE TO FACE DIMENSIONS: ANSI B16.10 (3) FLANGE DRILLING: ANSI B16.5 (4) PRESSURE & TEMPERATURE RATING: ANSI B16.34 (5) INSPECTION & TESTING: API 598 NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

SS 304 GATE VALVE; SIZE - 2" x 300# as per ASME B 16.34. MOC 1) Body: ASTM-A-351 CF8 2) Body Seat ring: A 182 Gr. F304 3) Gate: AISI 304 4) Stem: A 276 Gr.304 5) Stem packing: Graphite 6) Trim no.: 2 BOLTED BONNET, RISING STEM, NON RISING HAND WHEEL, OS & Y TYPE, GATE: WSF FLANGES DRILLED TO ANSI-B- 16.5 RAISED FACE NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

GATE VALVE WITH BOLTED BONNET, OUTSIDE SCREW & YOKE; SIZE: 6" NB X 150#; ENDS: FLANGED (RAISED FACE SERRATED) MOC: (1) BODY & BONNET: ASTM A351 CF8, (2) STEM: ASTM A276 TYPE 304, (3) SEAT RING: ASTM A351 CF8 / A182 F304, (4) DISC / WEDGE : ASTM A351 CF8, (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE : ASTM A439 TYPE D2 (7) GLAND & GLAND BUSH: ASTM A276 TYPE 304. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: ASTM A351 CF8 / A182 F304, (10) BONNET BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H (11) GLAND BOLTS / EYE BOLTS & NUTS: ASTM A 193 GR B8 & ASTM A 194 GR 8; (12) HAND WHEEL : DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD:API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10; FLANGE DRILLING:AS PER ANSI B 16.5; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

GLOBE VALVE WITH BOLTED BONNET, OUTSIDE SCREW & INTEGRAL YOKE; SIZE: 3" NB X 150#; ENDS: FLANGED (RAISED FACE SERRATED) MOC: (1) BODY & BONNET: ASTM A 216 GR WCB, (2) STEM: ASTM A182 GR. F6a, (3) SEAT RING: ASTM A 105 + HARDFACED WITH STELLITE #6 (API TRIM #5), (4) DISC / WEDGE : ASTM A 216 GR WCB + HARDFACED 13% CR STEEL (API TRIM #5), (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE (BUSH): ASTM A439 TYPE D2 (7) GLAND & GLAND BUSH: ASTM A 105. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: HARDFACED 13% CR STEEL (API TRIM #5), (10) BONNET BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H, (11) GLAND BOLTS / EYE BOLTS & NUTS: ASTM A 193 GR B7 &ASTM A 194 GR 2H; (12) HAND WHEEL : DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD:API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10; FLANGE DRILLING: AS PER ANSI B 16.5; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

GLOBE VALVE WITH BOLTED BONNET, OUTSIDE SCREW & INTEGRAL YOKE; SIZE: 2" NB X 150#; ENDS: FLANGED (RAISED FACE SERRATED) MOC: (1) BODY & BONNET:ASTM A 216 GR WCB, (2) STEM: ASTM A182 GR. F6a, (3) SEAT RING: ASTM A105 + HARDFACED WITH STELLITE #6 (API TRIM#5) (4) DISC / WEDGE: ASTM A 216 GR WCB + HARDFACED 13% CR STEEL (API TRIM # 5), (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE (BUSH): ASTM A439 TYPE D2 (7) GLAND & GLAND BUSH: ASTM A 105. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: HARDFACED 13% CR STEEL (API TRIM #5), (10)BONNET BOLTS &NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H, (11) GLAND BOLTS / EYE BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H; (12) HAND WHEEL: DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10, FLANGE DRILLING: AS PER ANSI B 16.5; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTES: 1. MTC AND HYDRAULIC TEST CERTIFICATE TO BE FURNISHED ALONG WITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT &PACKED WITH PROPER FLANGE CAP PROTECTOR. SUPPLIER SHALL BE ASKED TO PROVIDE QUALITY ASSUARANCE PLAN (QAP) & DRAWINGS FOR ALL THE VALVES WITHIN ONE WEEK FROM THE DATE OF PO PLACEMENT FOR APPROVAL OF RCF. 4. RCF OFFICER MAY WITNESS HYDROTESTING OF ALL THE VALVES AT SUPPLIERS WORKS BEFORE DISPATCH. SUPPLIER SHALL INTIMATE THE DATE OF TESTING AT LEAST 1 WEEK EARLIER. 5. SUPPLIER SHOULD ALSO OFFER ALL THE MATERIAL TEST CERTIFICATE DURING RCF ENGINEERS VISIT FOR WITNESSING THE HYDROTEST.

LIBRA ENGINEERING WORKS

VALTEK CORPORATION

ZED VALVES CO. PVT.LTD.

Evergreen Engineers

XSIS VALVES PVT LTD

sancovalves pvt ltd

PIPINGZONE

S AND M Industrial Valves Limited

JAYANT ENGINEERING AND MARKETING PVT. LTD.

DINTECH VALVES PVT. LTD.

KHIMJI FLOW EQUIPMENTS PRIVATE LIMITED.