Replacement of damaged doors and windows and G.I. water supply line at D Block and Reconstruction of damaged compound wall at entrance of MGGAC, Mahe

Amount

Code No. 7.100.1:- Laterite Stone Masonry for building work using neatly dressed Laterite Stone of size 30x20x20 cm in cement mortar 1:4 (1 cement : 4 Coarse sand ) for foundation and basement

Code No.7.101:- Extra for laterite stone masonry superstructure above plinth level and upto floor five level

Code No. 9.20.1:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type , core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Code No. 9.96.1:- Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 X 16 mm

Code No. 9.97.1 :- Providing and fixing aluminium tower bolts , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) , transparent or dyed to required colour or shade , with necessary screws etc. complete

Code No. 10.25.2:-Steel work welded in built up sections framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Code No. 13.1.1:- 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)

Code No. 13.61.1:-Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

Code No. 16.117:-Supply and fixing of side hung window at all levels made out of unplasticised Poly vinyl chloride frame from approved make of natural colour with casement outer frame of size 56 x 48 x 30 mm , shutter frame 66 x 56 x 30 mm with wall thickness of 1.8mm (+/- 0.3mm) and 5mm thick , clear glass . The gasket should be made of EPDM (Ethylene propylene dimonomer) with double gasket sealing and applying silicone sealants outside and acrylic sealent inside. The sections should be reinforced with GI sheet of 1.5mm thick with suitable drainage grouting including all necessary hardware fittings etc., all complete as per architectural drawings

Code No. 18.7.2:-Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 20 mm nominal outer dia pipes

Code No. 18.7.3:-Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 25mm nominal outer dia pipes

Code No. 18.7.5:-Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall -40mm nominal outer dia pipes

Code No. 18.7.6:- Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 50mm nominal outer dia pipes

Code No. 18.15.1:- Providing and fixing brass bib cock of approved quality - 15mm nominal bore

Nithesh C T