CA NO. CWE SGNR-66 OF 2019-20 SPECIAL REPAIRS TO BUILDING NO. P-19 AND BUILDING NO. P-59 (OLD MARRIED ACCOMMODATION) AT MILITARY STATION FAZILKA (2ND CALL)

Amount

Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm complete all as specified and directed by Engineer-in-Charge.

Taking down shutters and removing to store but area exceeding 1.00 Sqm and not exceeding 2.0 Sqm complete all as specified and directed by Engineer-in-Charge.

Taking down shutters and removing to store but area not exceeding1.0 Sqm complete all as specified and directed by Engineer-in-Charge.

S & F for Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes as per specification & drawing given in SSR-2009 complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘c’ channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour PVC sheets 5 mm thick for top rail, lock rail & bottom rail on either side & as gap insert for tap rail & bottom rail, paneling of plain colour PVC sheets to be fitted in the MS frame walded/sealed to the stiles & rails with suitable PVC sheet beading and joined to getger with solvent cement supplying & filling in the frame at site as per specification & drawing given in SSR-2009 complete all as specified and directed by Engineer-in-Charge.

S & F for aluminium handle cast type anodized 150 mm long complete all as specified and directed by Engineer-in-Charge.

S & F for aluminium anodized barrel tower bolt of extended section and fixed 200 mm long complete all as specified and directed by Engineer-in-Charge.

S & F for 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinges pin,anodised and fixed complete all as specified and directed by Engineer-in-Charge.

S & F for pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed by Engineer-in-Charge.

S & F for pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 11 here-in-before but size 75mm x 60mm as in cup board frames complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate for doors / wondows, bed blocks, coping, splash stone, filling of chowkhats etc. including necessary form work complete all as specified and directed by Engineer-in-Charge.

Cuting hole in brick wall in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick complete all as specified and directed by Engineer-in-Charge.

S & F for Flush shutters,35mm thick,solid core construction,with block board core and plywood face panels,commercial type on both sides as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.

M & L for block boards 19 / 20mm thick, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber as in pelmet/shelves frame work with teakwood lipping 6 mm thick complete all as specified and directed by Engineer-in-Charge.

S & F for continous piano hinges mild steel bright finish or galvanised of 30mm width complete all as specified and directed by Engineer-in-Charge.

S&F for second class hard wood plain solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F for 125mm Hasp and staple, aluminium anodized, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S & F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.

S & F for Aluminium alloy, anodised, sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surface over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted steel surfaces of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster/dado on brick wall including racking out joints, hacking for keys scrubbing down with water complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for 10mm thick rendering in Cement Mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Dismentling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles, 450mm x 350mm x 7mm thick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:3 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for non-skid ceramic tiles 7 to 8mm thick (square) area of each tile excluding 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed inn eat cement slurry over 15mm thick screed bed on rough mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed by Engineer-in-Charge.

M&L for Marble work 18 to 20mm thick in single piece (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade as approved complete all as specified and directed by Engineer-in-Charge.

M&L for marble slab flooring 18-20mm thick in single piece in riser of steps,skirting,dado and pillar laid and jointed within cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade as approved complete all as specified and directed by Engineer-in-Charge.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm 142 Grms / 20mm 210 Grms / 40mm 690 Grms) complete all as specified and directed by Engineer-in-Charge.

S&F for Rotational moulded polyethlene water storage tanks of capacity 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part- I including taking down / dismantling of old water tanks of any size complete all as specified and directed by Engineer-in-Charge.

All as per srl item No. 38 here in before but for for water tank 1000 liters complete all as specified and directed by Engineer-in-Charge.

S & F in repair galvanised mild steel wire cloth , 0.56 mm nominal dia of wie and average width of aperture 1.18mm, and fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engineer-in-Charge.

M & L for Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.

S&F for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5sq.m in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Anodised aluminium frame for doors, windows , ventilator with one or more rebates incl necessary joining cleats for fixing etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Anodised aluminium window shutters, aluminium section weighing 0.55 kg/m incl necessary joining cleats,glazing clips, ruber neoprene packing,handles Nos in each door , hinges,anodised aluminium snap beading screws etc complete all as specified and directed by Engineer-in-Charge.

Taking down existing aluminium window shutter with frame area not exc 1.50 sqm and refixing in same opening after minor repair to make the shutter fully functional and replacement the connected parts complete all as specified and directed by Engineer-in-Charge. Note :- Connected parts will be measured and paid seprately under respective items of BOQ.

S&F in repair bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stop cock 15mm bore dia, fancy type, cast copper alloy screwed down ,high pressure,with crutch or butterfly handle, screwed down, screwed both ends to iron pipe of size 15mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs angle valves chrome plated fancy type 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S & F in repair MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated towel rail of size 60cm fixed with chromium plated brass screws and plastic cleats complete all as specified and directed by Engineer-in-Charge. Make Jaquar Cat Part No. ACN-1111NM or equivalent

S & F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15 mm dia steel pipe or union complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs PVC connection both sides brass unions internal for size of 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PVC waste pipe 32mm dia & 90 cm long complete all as specified and directed by Engineer-in-Charge.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered or unplastered surface of walls and applying two coats of cement based paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorative surface with complete removal of existing treatement of wall and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparatrion of old decorative surface with complete removal of existing treatment and applying one coat of exterior weatherproof emulsion paint on walls over a coat of exterior wall primer complete all as specified and directed by Engineer-in-Charge.

M & L for Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun complete all as specified and directed by Engineer-in-Charge.

M & L for Preparation of Old plastered surfaces with removing old treatment and applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated, plastered or pointed surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old decorative surface of walls and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed by Engineer-in-Charge.

S & F for 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm CI Bends (any radius) with duck’s foot or heel rest fitted with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 75mm bore Cast iron cowls, complete all as specified and directed by Engineer-in-Charge.

Taking down steel tubing 15mm bore and connections,including cleaning for refixing or remove to store complete all as specified and directed by Engineer-in-Charge.

Taking down steel tubing 20mm bore and connections,including cleaning for refixing or remove to store complete all as specified and directed by Engineer-in-Charge.

S & F for 15mm bore medium grade tube galvanised with all fittings and fixed complete concealed including groove cutting for concealing to walls & ceiling or laid in floor including taking down old steel tubings complete all as specified and directed by Engineer-in-Charge.

S & F for 20mm bore medium grade tube galvanised with all fittings and fixed complete concealed including groove cutting for concealing to walls & ceiling or laid in floor including taking down old steel tubings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs for drapery curtain rod 25mm dia, fancy type, fabricated out of mild steel sheet not less than 20 guage, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated powder coated natural color complete all as specified and directed by Engineer-in-Charge.

S&F in repairs cast iron 100 mm dia floor trap, plain with grating including jointing with solvent cement to connect waste pipe and fixed with PCC 1:2:4 complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm sand cast Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F for Cast iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints, laid in walls or in floors complete all as specified and directed by Engineer-in-Charge.

M & L for 50mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 including demolitionof brick work built in cement mortar complete all as specified and directed by Engineer-in-Charge.

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

M & L for form work to soffits of suspended slabs such as roof slab and similar work not exceeding 200mm thick for rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge.

M & L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge.

Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

S & F for Waste coupling for 40mm bore dia of discharge pipe of PTMT (half or full threaded) . (Minimum weight 60gms) complete all as specified and directed by Engineer-in-Charge.

Taking down shutters and Refixing of shutters of any description exceeding 1.00 Sqm and n. exc.2.00 sqm each in the same opening complete all as specified and directed by Engineer-in-Charge.

M & L for Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to Store complete all as specified and directed by Engineer-in-Charge.

Taking down eves and gutter and rainwater pipe complete all as specified and directed by Engineer-in-Charge.

S & F for PVC pipes (SWR) single socketed with rubber ring joints 110mm dia fixed to wall complete all as specified and directed by Engineer-in-Charge.

S&F for PVC ( SWR) bends any radius bore of 110 mm complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:5:10) type E-2 (using 40mm graded brick aggregate) as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed by Engineer-in-Charge.

M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below and as directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete all as specified and directed by Engineer-in-Charge. Manufacturer. Make:- Dr. Fixit / Fosroc / STP Note: (i) The treatment shall be carried out by approved authorised applicator approved by GE as per the manufacturers instructions and as directed by the Engineer in charge. (ii) The Plan area of floor (sunken) shall be considered for payment and provn of cement work except PCC in sunken filling item 91 is included in quoted rate for this item. (iii) PCC filling in sunken portion will be measured seperately.

Supply and fix in repair PVC low level flushing cistern 10 litre capacity, valveless syphonic action type with float, handle including flush pipe of polythene of low or high density of PVC 32mm dia, 60cm long and bracket etc and making connection including making good disturbed portion complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed by Engineer-in-Charge.

Shotcreting 25mm thick in RCC columns, beams and slabs etc in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characterristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 50mm average thickness from slabs,beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specifications and disposal of debries for all lead and lifts all complete all as specified and directed by Engineer-in-Charge.

Providing and fixing hard drawn steel wire fabric of size 25mm x 25mm mesh or other suitable size wire mesh to be fixed and firmly anchored to the concrete surfaces by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tools and plants complete all as specified and directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. Make : Dr Fixit / Fosroc / BASF / STP

Removal of mud to a distance exceeding 250m and n exc. 500m and depositing where directed complete all as specified and directed by Engineer-in-Charge.

M & L for 15mm thick waterproof plaster using cement sand mortar 1:3 on slab/existing roof surfaces & vertical surface admixed with Dr Fixit Pidiproof LW+ @ 200ml per bag of cement complete all as specified and directed by Engineer-in-Charge.

M & L for 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate on roof slab complete all as specified and directed by Engineer-in-Charge.

Providing and applying microfiber reinforced UV resistant Acrylic polymer coating three coats having solid contents 69% polymer content 35% & Tensile strength 2.6N/mm2 of Dr. fixit Newcoat/stat/parex or equivalent with a paint brush over existing roof surface after removal of all loose material, lime dust etc. with wire brushes, coir brushes from roof surface to get absolutely cleaned surface free of foreign contaimnant filling of cracks wherever found with polymer based mortar, and after repairing the surface apply primer coat with Dr. fixit Primeseal. polyester reinforced fiber net laid on the surface after the first coat and all the joints of brick is repaired by polymer based mortar. Undulation on the surface repair before executing the water proofing treatment complete all as specified and directed by Engineer-in-Charge. Note : The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer instructions & complete all as specified and directed by Engineer-in-Charge.

M & L for Endura Cool roof tiles 300 x 300 x 10 mm white vitrified water absorption < 0.5% SRI >90 (ASTME 1980, EN673 and En 411) BEPL (Building energy performance laboratory ) certified laid over screed bed or bedding layer of mortar 15 mm thick CM (1:4) complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick tiles or terracing tiles,single layer on roofs including cement motor complete all as specified and directed by Engineer-in-Charge.

Dismantling of mud in roofs,any thickness,including plastering and leeping (Whether full thickness removed or only a part thereof) complete all as specified and directed by Engineer-in-Charge.

M & L for RCC 1:1½:3, (nominal mix), type A-1, using 20mm graded aggregates as in Chajjas including TMT bars welded with existing steel complete all as specified and directed by Engineer-in-Charge.

M & L for RCC 1:1½ :3, (nominal mix), Type A-1 using 20mm graded stone aggregates for slabs supported on walls, beams, columns and in shelves, the like complete all as specified and directed by Engineer-in-Charge.

S&F in repairs sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed by Engineer-in-Charge. Make-ESSESS Cat Part No DE- 12 or equivalent.

S & F in repairs brass chromium plated wall mixer 3 - in - 1 for mixing hot and cold water screwed down for 15mm iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engineer-in-Charge. Make Jaguar cat part No. QQT-7169B or equivalent

S&F for Vitreous china wash basin white flat back size 550 x 400mm size,with pedestal incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair complete all as specified and directed by Engineer-in-Charge.

M&L for Granite (of any type) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20mm thick rendering in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished but of brass, polished complete all as specified and directed by Engineer-in-Charge.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

Supply only, butt hinges 100mm of stainless steel as approved complete all as specified and directed by Engineer-in-Charge.

S & F for framed work such as grills, cooler stand ,grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, steel window 1.25mm thick box type (primer coated) ERW bollow "P" section of size 60mm x 25mm single rebated comprises gauge skeleton shutter and glazed skeleton shutter ERW section 50mm x 20mm and 1m thick with two openable leaf consisting two Nos. of sash bars of flat iron 12mm x 3mm complete welded to frame with one vertical mullion of ERW box type "T" section of size 60mm x 25mm and 1.25mm thick includingcutting holes and making good dismantled portion in PCC 1:2:4 type B1 four Nos. for each window including following fittings welded to the frame shutters complete all as specified and directed by Engineer-in-Charge :- (a) Hold fast 150mm long of 12mm x 3mm made to shape - 04 Nos. per window (b) Handle of "Z" section 20mm x 25mm, 100mm long - 01 No. per leaf (c) MS tower bolt 150mm lone - 02 Nos. per leaf (d) MS pintol hinges of size 100mm x 14mm - 02 Nos. per leaf (e) "Z" section 20mm x 25mm x 100mm long stopper per leaf Note : Wire mesh and painting shall be measured and paid separately under appropriate item(s)

M & L, for viritfied ceramic tiles 10mm thick light shade (square or rectangular) area of each tile not .exceeding 0.36 sqm as in vertical surfaces like dado or skirting over 10mm thick in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 10mm thick cement sand screed in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

S & F in repairs mild steel Peg stay for steel window with screws or necessary welding complete all as specified and directed by Engineer-in-Charge.

S & F in repairs mild steel handle for steel window with screws or necessary welding complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 20mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed by Engineer-in-Charge.

S & F for soap dish fixed as in repairs chromium plated brass complete all as specified and directed by Engineer-in-Charge.

S&F for floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.

M & L for Pieces, small let in for making good where hinges, etc. have been removed from chowkhals or frames, joinery, etc. including painting or oiling to match, if required complete all as specified and directed by Engineer-in-Charge.

S&F in repair pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engineer – in – Charge

S&F for urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 grams) complete all as specified and directed by Engineer-in-Charge.

S&F for vitreous china urinal, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and unions for discharge pipe complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling board or insulationboards/slabs/blankets, any thickness including cover fillet complete all as specified and directed by Engineer-in-Charge

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W (Gde-E-250) 'A' quality complete all as specified and directed by Engineer-in-Charge.

S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new steel and iron surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F for anodised aluminium snap grind frame work of size 605x605 mm for false ceiling and providing and fixing Perforated particle board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs sheet glass 4.8mm thick ordinary quality and fixed in aluminium section including solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturers in squares not exceeding 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass 4.8mm thick ordinary quality and fixed in aluminium section including solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturers in squares exceeding 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for anodised aluminium grill of daimond size 100x100mm of dia 6mm including necessary joining cleats , anodised aluminium snap beading screws, complete all as specified and directed by Engineer-in-Charge.

S&F for aluminium (die cast) body, door closer hydraulically regulated designation No. 3 , universal type , suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick cement concrete 1:4:8 type D2 (40mm graded aggregate) as in sub base of floor complete all as specified and directed by Engineer-in-Charge.

M&L for Chequered cement concrerte tiles, 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments over 15mm thick screed bedding layer of mortar in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-0, (12.5mm graded stone aggregate) in roof, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.

Dismantling Trellis work (Jafri) / RCC jallies, any description, fixed in any position complete all as specified and directed by Engineer - in - Charge.

M & L for precast cement concrete Type B0 1:2:4 using 12.5mm graded stone aggregates as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately) set in cement mortar 1:4 complete all as specified and directed by Engineer - in - Charge

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface complete all as specified and directed by Engineer-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate.

Taking down unserviceable main switches and MCB distribution boards single phase complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point / fan point / bell / engagement light controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated sheet top cover etc complete all as specified and directed by Engineer-in-Charge. Note : Cost of MS sunken box and bakelite sheet included in the rate

All as per Srl item No. 146 here-in-before but for one three pin socket outlet 5 Amps on the independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 146 here-in-before but for one three pin socket outlet 5 Amps on the same board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 146 here in before but for with 1.5 Sqmm (nominal area) PVC insulated multistranded copper conductor cable unsheathed ISI marked controlled by two way switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified and directed by Engineer-in-Charge.

S&F for switch Piano type single pole one way 5 Amp,230 VAC supply complete all as specified and directed by Engineer-in-Charge.

S&F for switch Piano type single pole two way 5 Amp,230 VAC supply complete all as specified and directed by Engineer-in-Charge.

S&F for socket two in one ,3 Pin 5 Amps 230 VAC supply complete all as specified and directed by Engineer-in-Charge.

S&F for switch Piano type single pole one way 15 Amp on laminated sheet top cover complete all as specified and directed by Engineer-in-Charge. Note : Sheet top cover including in point wiring.

S&F for socket Pinao type 6 Pin 16 amp,230 VAC complete all as specified and directed by Engineer-in-Charge.

Supply & fixing for PVC for Lamp holder suitable for and including batten fittings Watt with backalite 20mm back plate complete all as specified and directed by Engineer-in-Charge.

S&F for LED Lamp 10 Watt retrofit and connecting complete all as specified and directed by Engineer-in-Charge.

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F for Electric bell ding dong complete all as specified and directed by Engineer-in-Charge.

S&F for bell push flush type 5 Amp, complete all as specified and directed by Engineer-in-Charge.

S&F for fan regulator step down electronic type heavy duly flush type 230 volts AC single phase 400 Watt fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed by Engineer-in-Charge. Note : Laminated sheet top cover and sunken box is included in point wiring

M&L for LED 10W bulkhead fitting with IP-65 engineering plastic housing with clear ,single phase 240V, including 1.0sqmm copper flexible cable twiested three core alongwith flelxible PVC condiut from ceiling rose to fitting testing complete all as specified and directed by Engineer-in-Charge.

S&F for Exhaust fan heavy duty 300mm sweep mounted in suitable opening arrangement with louvers shutters suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and fixed by using 4 Nos. 200mm long 12mm dia bolts, nuts and washers and grouted in wall in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

S & F for MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 5 to 32 Amps complete all as specified and directed by Engineer-in-Charge.

S & F for MCB suitable for 240 volts AC supply, SPNwith over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 32 Amps complete all as specified and directed by Engineer-in-Charge.

S & F for MCCB TPN suitable for 63 Amp, 415 volts AC supply and short circuit protection and rupturing capacity not less than 25 KA complete all as specified and directed by Engineer-in-Charge.

S&F for Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 167 here in before but TPN DB 4 Way complete all as specified and directed by Engineer-in-Charge.

Blanking plae of plastic (Suitable for distribution board) complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth platge electroe 60 cmx60cm6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal round level) with edge of the plae not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and GI washers earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15cm thick all around bottom and top of earth plate as shown in electrical piate No. 3 of SSR Part-I and connecting to earthing test point and testing on completion including PCC 1:3:6 type C2 for earthing pit, GI light grade protection pipe of size 15mm dia, watering pipe 20mm bore medium grade, CI cover and frame necessary earth works and PCC work etc complete all as specified. Earth plate shall be surrounded by alternate layer of charcoal of coke and common salt 15cm thick alround the earth plate including bottom and top complete all as specified and directed by Engineer-in-Charge. Note: PCC chamber shall be constructed at least 1.5mtr away from the earth electrod and pipe for watering shall be slanting manner

S&F for LED tube light fixture,environmental friendly energy efficient ready to use 18W LED 6000k(4') complete with with all electrical connection complete all as specified and directed by Engineer-in-Charge.

S&F for Batten for LED tube light fixture with extruded aluminium heat sink,environmental friendly energy efficient ready to use with 18W LED 6000K(4') including electric connection with PVC copper flexible twin core cable,1.0 Sqmm from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

M & L for Sub main wiring with 2 single core 6 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified and directed by Engineer-in-Charge. Note:- Three lengths of 6 sqmm cable and will be measured as one length

Supply and installation of electric storage water heater 25 Ltrs of 5 Star Rating Vertically including temperature control system complete with all fittings and accessories,feroglass technology,incoloy glass coated heating element CfC Free high density PUF Insulation preventing heat loss,minimum five star rating complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of PVC connection wire woven with nickel plated brass adopter, both side threaded 45 cm long to the suitable size of geysers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of PVC connection 15 mm size with PTMT nuts of length 450 mm for cold water connections to geysers complete all as specified and directed by Engineer-in-Charge. -------------------------------------------------------------------------------------------------------------- Note : A sum of Rs. 78,180.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 36 & 37(R) (Schedule of Credit) of Tender document

RUCHIKA CONSTRUCTIONS

MANCHANDA CONSTRUCTION CO

SHARDA ENTERPRIES