Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹43.7 L+₹6.5 L (17.4%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹43.7 L
EMD Value
₹87,400
Closing Date
8 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Provn of certain Rev and Minor works under GE Gurdaspur.
2023_MES_628113_2
GE GSR-63/2023-2024
Open Tender
Civil Works
Item Rate
240 days
GE Gurdaspur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹87,400
21 Feb 2024
18 Dec 2023
15 Jan 2024
18 Dec 2023
8 Jan 2024
26 Dec 2023
Amount
Surface excavation in soft/ loose soil n exc. 30 cm deep and averaging 15cm deep and getting out
Excavating in trenches, in soft/ loose soil, n exc.1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified & directed.
Excavation in post holes soft/ loose soil ( or similar holes) each n. Exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mix with earth around in layers not exceeding 25 cm.
Material and labour for cement concrete concrete type E-2, 1:5:10 (40 mm graded stone aggregate) as in foundation, filling, sumken and mass concrete complete all as specifeid & directed.
M&L cement concrete type D-2 (1:4:8) using 40mm graded stone aggregates in foundations, fillings and mass concrete all as specified & directed
Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc complete all as directed.
M&L for brick work with flyash old size bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6 brick complete all as specified and directed.
All as per Srl item No 7 above but except bricks.
M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc. 6m mean radius built in CM 1:4 brick complete all as specified and directed.
M&L Brickwork with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1 : 4 all as specified & directed.
Removing excavated material soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
Removing surplus excavated materials (soft/loose soil) to a distance exceeding 1.5 km but not exc 5.0 km complete all as specified and as directed by Engineer-in-Charge.
Returning, filling in, soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified & directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc.
M&L Damp proof course cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregates, 40 mm thick to horizontal or vertical surfaces including necessary formwork using waterproofing compound all as spd. Note : WPC shall be measured and paid separately.
Supply only integral water proofing compound
M&L for design mix RCC Type M-25 ( 20 mm graded aggregate stones) as in beams, lintels, cantilevers, bressummers all as specified & directed.
M&L for reinforced cement concrete type M-25 Design mix (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified
M&L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) for cover slabs for man holes, drain etc., water troughs, shelves and similar articles with plain faces etc, complete all as specified and as directed.
Use and waste of formwork to sides & soffits of beam, lintels, cantilevers, shelves including supports, overhangs for rough finished flat surfaces of concrete, complete all as specified and as directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished flat surfaces of concrete complete all as specified.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.
M&L Mild steel bars TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.
Taking down cement plaster any description on brick or stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.
M&L 12mm thick cement plastering in cm 1:6 on fair faces of brick or concrete surfaces (internal), finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 15mm thick cement plastering in cm 1:6 on fair faces of brick or concrete surfaces (internal), finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 15mm thick cement plastering in cm 1:4 on other than fair faces of brick or concrete surfaces, finished the surfaces even and fair as spd & directed.
M&L 15mm thick cement plastering in cm 1:4 on fair faces of brick or concrete surfaces, finished the surfaces even and fair complete all as specified and directed.
M&L for rendering 5mm thick cement plastering on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as spd & directed.
M&L for preparation of newly plastered/ unplastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified & directed.
M&L for preparation of newly plastered/ unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer on walls as approved complete all as specified & directed.
M&L for preparation of newly plastered/ unplastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care putty on walls as approved complete all as specified & directed.
M&L for preparation of newly plastered / unplastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.
M&L Spreading levelling earth in layers n exc. 25 cm thick including well ramming and watering as required.
M&L for sand filling under floors or in foundation including well ramming and watering consolidation complete all as specified and directed.
M&L Hardcore of broken stone, gauge n exc. 63 mm, depoisted, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a true surface
M&L 75 mm thick PCC 1:4:8 type D1 (using 40 mm graded stone aggregate as in as sub base floor complete all as specified and directed..
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, coping, benching, rounded or chamfered on edges complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair, laid in alternate bays not exceeding 3.0m in length, joints filled with bituminous mastic filling comprising 1 part of heated hot blown bitumen 85/25 and 3 parts of heated sand complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.
M&L Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.
M&L Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.
M&L Glazed ceramic tiles in vertical surface 350mmx 250mmx 7mm/ 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick screed bed in CM 1:4 complete all as specified & directed.
S&F MS framed work as in door or gates or ckowkats of angle or other section with gusset plates, rail, braces etc. and similar work conforming to Fe-290 gde E-165 and hanging; also fastening complete all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.
M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
Taking down existing steel window/ ventilator complete all as directed. window
S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including one shop coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, shall be measured and paid for separately
S&F anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing average not less than 1.00kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including taking down old existing shutters complete all as specified.
S&F anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including taking down old existing shutters complete all as specified.
S&F anodised aluminium powder coated frame (Minimum thickness of powder coating 50 micron) for doors, windows, ventilators, with one or more rebates including joining cleat for fixing etc. including taking down old existing frame complete all as specified
Supply and fix 5.50mm thick sheet glass, ordinary quality in square, rectangle exc 0.5 sqm, any size and glazing with and including suitable size rubber beading/ stainless steel pins etc. as in aluminium frames/ shutters complete all as specified and as directed.
S&F 3.0 mm thick figured glass, pin head type and glazing with oil putty/ wooden beading in Square n. exc 0.5 sqm in each pane complete all as specified and directed.
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel.
S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed.
S & F 100 mm Extruded aluminium alloy handles, fabricated type, anodised.
Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.
S&F for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
M&L for preparation of untreated steel / iron surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint and including one coat of red oxide primer complete all as specified & directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.6 kg/sqm complete all as specified & directed.
M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 kg /Sqm after cleaning surface complete all as specified and directed.
M&L for prepapation of APP membrane surface, finishing with two coats of aluminium base paint complete all as specified and as directed.
S&F vitreous china squatting pan (Orissa pattern) size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including connection to trap and flushing pipe etc. complete all as specifed .
S&F for Vitreous China wash down water closet pan (pedestal pattern) white (EWC) including plastic water closet seat white closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device with brass CP flushing jet including pipe of suitable length with brass check nuts, complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white (EWC) including plastic water closet seat white closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device with brass CP flushing jet including pipe of suitable length with brass check nuts, complete all as specified and directed.
S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including 32mm dia PVC flush pipe and connections, joints to pipes complete all as specified and as directed.
S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including 32mm dia PVC flush pipe and connections, joints to pipes complete all as specified and as directed.
S&F for vitreous china wash basin, white, size 550 mm x 400 mm flat back including brackets, waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms), PVC waste pipe 32mm bore, cutting for and pinning in ends of bracket or errecting stand, pillar tap, fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure and fly nuts screwed for iron pipe for 15mm bore, complete all as specified and as directed.
S&F for vitreous china wash basin, white, size 630 mm x 450 mm flat back with full pedestal including brackets, waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms), PVC waste pipe 32mm bore, cutting for and pinning in ends of bracket or errecting stand, pillar tap, fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure and fly nuts screwed for iron pipe for 15mm bore, complete all as specified and as directed.
S&F in repair for vitreous china wash basin, white, size 550 mm x 400 mm flat back with full pedestal including brackets, waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms), cutting for and pinning in ends of bracket or errecting stand, complete all as specified and as directed.
S&F in repair vitreous China half stall type urinal, size 345x320x560mm, white, with brass CP spreader including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, 32mm dia PVC flush pipe waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms) complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm all as specified & directed.
S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified & directed.
S&F PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified & directed.
S&F in repair PVC waste pipe 32mm dia 600mm to 750 mm long for wash basin, urinal etc. all as specified and directed.
S&F rotational moulded polythene, triple layers, white, water storage tank 500 Ltr capacity, ISI marked, closed top, cylindrical, hoisted and fixed in position including 20mm bore PTMT ball valve epoxy coated minimum weight 210gms with aluminium rod complete all as specified and directed
S&F rotational moulded polythene, triple layers, white, water storage tank 500 Ltr capacity, ISI marked, closed top, cylindrical, hoisted and fixed in position including demolition of existing tank complete all as specified and directed
S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.
Taking up or down steel tubing 15mm bore with all fittings and connections complete all as specified and as directed.
Taking up or down steel tubing 20mm bore with all fittings and connections complete all as specified and as directed.
S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.
S&F Galvanised iron steel water tubing, 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.
S&F in repair pillar tap, fancy type, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe for 15mm bore, complete all as specified & directed
S&F 15 mm bore stop cock/ angle valve cast copper alloy CP screwed down high pressure with crtuch or butterfly handle complete all as specified & directed
S&F 20 mm bore stop cock cast copper alloy CP screwed down high pressure with crtuch or butterfly handle complete all as specified & directed
S&F in repairs stop valves or angle valve 15mm bore pipe, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F Bib taps cast copper alloy chromium plated fancy type 15 mm bore long nose screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed
S&F in repair Bib taps cast copper alloy chromium plated fancy type 15 mm bore with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed
S&F 100 mm dia stainless steel grating with or without hole, hinge type complete all as specifed & directed.
S&F aluminium anodised towel rail 20mm dia, D type, 60cm long fix to wall complete all as specified and as directed.
S&F in repair tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and as directed.
M&L for green markble work 16-18 mm thick (table rubbed and polished) in shelves in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
S&F toilet paper holder flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings complete all as specified and directed.
S&F 100 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75 mm bore PVC ( SWR) bend any radius with access door
S&F 75 mm bore (SWR) vent cowl
S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F 100 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement
M&L for PCC 1:4:8 type D (using 40 mm graded stone aggregate ) as concrete bed , laid to falls in trenches in any depth including packing under and haunching against the sides of RCC/SGSW pipes 150mm bore, after the pipes have been laid and tested complete all as specified & directed
M&L salt glazed stoneware drain pipes Internal diameter of pipe 150mm laid in trenches and jointed complete all as specified & directed
M&L reinforced concrete drain pipes NP3 200mm bore including for laying pipes level or to falls In trenches, on concrete bed and all necessary extra joints, waste and cutting as jointed complete with collars as specified and directed.
Cutting into existing manhole of 150 mm imternal diameter of pipe for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required
M&L Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment all as specified & directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in mud stops, kerbs and like including weathering slight rounded and throating complete all as specified and directed
M&L preparation of rough concrete surface by brushing with wire brushes and removing dust, loose materials etc, sweeping with brooms and finally fanning the cleaned surface with air blown compressor to remove all loose dirt etc and providing & laying 40mm thick Antistatic Bitumen mastic flooring conforming to IS 8374-1977 and IS 13026-1991 for Specification and IS 1196-1978 for laying bitumen mastic flooring and having material specification as below:- (i) Bitumen (90x15 or 75/15) grade : 13-18% (ii) Carbon black of conductive grade like Graphite : 5-7% (iii) Stone dust (clean) : 30% (iv) Stone grit (max 6mm size) : 20% (v) Lime stone dust (70 to 75% Calcium carbonate): 30%, laid and spread uniformly and compacted with hand roller to a uniform smooth surface complete all as specified and directed.
M&L 40mm thick Plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor and other similar works, including necessary form work, complete all as specified.
M&L Chequered cement concrete tiles coloured 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F of Rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in Roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg, strips (Beam, tee, angle, Coulmn, Gusset Plates, channel, Hollow square/Rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc. complete all as specified and directed by Engr-In-Charge.
S&F anodised aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F 4mm thick aluminium composite pannel (ACP) sheet for aluminium door, window, partition etc including necessary glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge.
M&L framed brackets of angles or tees cut to shape, drilled, angle work for Chajja projection and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
Point wiring with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings with continuous earth wire of PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to and including CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. and making good to the disturbed surfaces complete all as specified for One light point/ Fan/ bell point controlled by one way switch
All as per Srl item No 119 above but for one 5 pin socket outlet 5/6 amps on same board.
All as per Srl item No 119 above but for one 5 pin socket outlet 5/6 amps on indipendent board.
All as per serial item No. 119 here-in-before but with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) including PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.
M&L for sub main wiring with two single core multi stranded PVC insulated, unsheathed copper conductor of grade 1100 Volt , FRLS cable of size 6 sqmm (red for phase and black for neutral) and including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 25 mm dia. & 6 sqmm FRLS multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth duly complete and taking down old unserviceable one. Note :- (a) Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing finish deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run.
S&F switch piano flush type single pole one way 5/6 amps.
S&F socket outlet 3 pin 5/6 amps flush type.
S&F switch piano flush type 15/16 amps single pole type one way
S&F socket outlet 3 pin 15/16 amps flush type
S&F surface mounting universal batten housing made of powder coated CRCA sheet suitabe for and upto 1x18/20W LED tube rod complete all as specified and directed.
S&F LED tube light 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting into tube light batten fitting complete all as as specified and directed.
S&F lamp holder, PVC/ polycarbonate type with back plate, suitable for lamp holder base of and including 9 watt LED retrofit lamp complete all as specified and as directed.
S&F ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body
S&F GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 40mm x 5mm thick and drilling of hole for and including nuts, bolts and washers including painting MS clamps with two coats of synthetic enemal paint over a coat of red oxide primer including taking down the existing GI pipe bracket complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixed sheet metal enclosure for DB’s when MCB’s to be used, 240 volt 8 way SPN with bus bar and double door complete all as specified and directed. Note:- All the connection of incoming and out going wire in MCB will be made with thimble of suitable size as directed
Supply and fixed sheet metal enclosure for DB’s when MCB’s to be used, 240 volt 4 way SPN with bus bar and double door complete all as specified and directed. Note:- All the connection of incoming and out going wire in MCB will be made with thimble of suitable size as directed
S&F MCB single pole 6 amps to 32 amps complete all as specified and directed.
S&F MCB single pole and neutral 32 amps complete all as specified and directed.
S&F 6 sqmm, 2 core 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections
S&F GI pipe of size 25mm bore medium grade including all fittings laid in trenches
S&F Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm dia.
Cutting the existing steel water tubing for alternation or addition and screwing of pipe size 40 or 50mm dia. (Each cut measured)
Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately.
Supply and lay brick common burnt sub class "B" old size for protection of cable laid in trenches for under ground cable all as specified.
M&L sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15 cm before laying the cable & 8 cm after laying the cable complete all as specified.
M&L for cable protection GI tubing light grade fixed long the pole/ under road/ along the wall of size 40mm bore with necessary clamps complete all as specified and directed.
Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
Harbhajan electric co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .