Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC | L1 | Accepted-AOC Low | |
| 2 | L2₹31.9 L+₹1.3 L (4.27%)Rejected-AOC HOSUE NO 44 MASTER COLONY SATROD KHAS HISAR HARYANA 125044 | HISAR | HISAR | HARYANA | 125044 | L2 | Rejected-AOC High | |
| 3 | L3₹32.6 L+₹2.0 L (6.55%)Rejected-AOC | L3 | Rejected-AOC High | |
| 4 | L4₹32.9 L+₹2.3 L (7.48%)Rejected-AOC | L4 | Rejected-AOC High | |
| 5 | L5₹33.5 L+₹2.9 L (9.61%)Rejected-AOC | L5 | Rejected-AOC High |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
30 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Sachin Jaiswal, IDSE, CWE Chandimandir
HQ CWE Chandimandir
CA NO. CWE/CHM-25/2023-24 REPAIRS AND MAINTENANCE TO OTM ACCN IN CERTAIN MAJOR UNITS IN THE AOR OF AGE B/R-III AT CHANDIMANDIR MIL STN
2023_MES_597641_1
CWE/CHM-25/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
HQ CWE Chandimandir
Class C category a(i)
8 documents required · 8 mandatory
₹1,000
Yes
GE Chandimandir
₹1.1 L
Yes
25 Sept 2023
23 May 2023
5 Jul 2023
23 May 2023
30 Jun 2023
16 Jun 2023
24 May 2023 - 31 May 2023
Amount
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4.00 sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 sqm each and removal from site complete all as specified & directed.
Supply and fixing pressed steel frame for doors with single rebates of size 105 x 60mm including necessary fixing lugs/hold fasts, hinges, lock strike plate, including filling hollow frame with PCC (1:3:6), etc. (cost of hinges & shop coat primer included), including taking out unserviceable frame complete all as specified & directed.
Supply and fixing factory made pressed steel frames having profile 125mm x 60mm as shown in I.S for doors with one or more rebates made , including necessary fixing lugs/hold fasts, hinges, lock strike plate, etc.including filling of PCC 1:3:6 as back fill of pressed steel frame including taking out unserviceable frame Complete all as specified & directed.
Supply and fixing in repair vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste, chain plug and porcelain stopper,incl waste pipe, waste coupling and brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fixing 30mm thick flush shutters, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing 30 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars) , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)
S&F 30 mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers suplied and fitted to chokhats complete all as specified and directed.
Supply and fixing powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Sliding / openable / three track) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc including taking out unserviceable aluminium frame complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws, locking, rolling in case of sliding shutters etc. Weight of fitting fixtures will bot be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.
Supply and fixing 5.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels not exc 0.5 Sqm in each pane, complete all as specified & directed.
Supply and fixing 5.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed.
Supply only 3mm thick aluminium composite panel sheet (ACP) colour as approved by GE all as specified and directed.
Supply and fixing mortice lock, verticle type, mild steel, 4 levers, size 100mm, brass body, complete all as specified and directed
Material and labour standard GI snap grid of size 605mm x 605mm frame work for false ceiling with main tee 32x24x1mm thick, cross tee 26x24x1mm thick and wall angle 24x24x1mm thick having flange power coating, and covered with PVC thin sheet same to placed in grid by means of ceiling and grid to be tied properly / sutably by GI strip / GI wire in truss / ridge/purline including dismantling of old existing GI snap grid complete all as specified and directed. Note : Ceiling board shall be measured and paid as supply only.
Material & labour for supply only preliaminated particle board 7-8 mm thick of size 600 x 600mm, interior grade, preliaminated one side with decorative choice lamination and other side balancing white liamination, fixed with staples as in snap grid complete all as specified and directed.
Supply and fixing in repairs hollow PVC wall lining, with necessary screws and drilling, PVC panel 0.5mm thick each flap and both flap connected with ribs and overall thickness not less than 5mm design printed in 200 to 300mm wide pannels complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and labour glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Material and labour non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Material and labour coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per item No 21 here in before but in skirting including necessary cutting over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.
Material and labour double charged coloured vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles exc 1.00 sqm but n.exc 1.40sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per item No 23 here in before but in skirting including necessary cutting over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.
Material and labour for machine cut Kota Stone Slab flooring, etc. 18-20mm thick, best quality (minimum size 55cm x 55cm) over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with and including dismantling of existing stone complete all as specified and directed.
Material and labour 16 to 18mm thick granite stone slabs, width and length as per site requirement, best quality machine cut and polished to be fixed in floors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of existing damaged slab complete all as specified and directed.
Supply and fix factory made rubber moulded machine pressed coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Supply and fix concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, complete all as specified and directed
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any type of existing treatment including mud phuska complete all as specified & directed.
Material and labour PCC 1:3:6 type C-1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and directed.
Material and labour for surface painting, with a layer of blown bitumen of 85/25 & adjoining vertical surfaces including applying bituminous primer @ 0.40 ltrs per square meter and Material and labour for for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and directed.
Material and labour 40mm thick brick tiles with including screed bed 20mm thick cement mortar 1:4 and jointed, grouted and flush in cement mortor (1:3) pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed.
All as per serial item No 32 herein before but except tiles –ditto-
Supply and fixing in repairs steel rolling shutters (1 mm thickness of lath), without ball bearing, as specified including top cover, anchoring rod, hasp and staple, including one shop coat of red oxide zinc chrome primer, erected in position erected in position as indicated, push pull or manual type as indicated complete all as specified and directed.
Supply and fixing in repairs steel rolling shutters (1 mm thickness of lath), without ball bearing, as specified including top cover, anchoring rod, hasp and staple, gear operated type with bevel gear box and crank handle including one shop coat of red oxide zinc chrome primer, erected in position as indicated complete all as specified and directed.
Repair to rolling shutter in its original position, ( size of shutter exc 7.5 but n exc 10 Sqm each) with oiling, greasing and making good by hammering, screwing, drilling & other black smith work and making smooth operation complete all as specified and directed.
Dismantling of brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks, old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.
All as per serial item No 38 herein before but except bricks (using old serviceable bricks obtained from ser item No 37 here-in-above) complete all as specified and directed.
Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smooth in cement mortar (1:4), complete all as specified and directed.
Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smooth in cement mortar (1:4), inclunding taking down of existing plaster complete all as specified and directed.
Material and labour 10mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement, inclunding taking down of existing plaster complete all as specified and directed
Material and labour for rendering 5 mm thick in cement and sand mortar (1:3) on concrete surfaces (ceiling) finished even and smooth without using extra cement including taking down old cement plaster complete all as specified & directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint (approved colour), including necessary scafolding complete all as specified and directed.
Material and labour preparation of new plastered surfaces of any description of wall and applying two coats of oil bound distemper over one coat of interior wall primer including wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed by Engineer-in-charge.
Material and labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed.
Material and labour for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed.
Material and labour preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Demolition of plain cement concrete (unreinforced) of any description and in any position complete all as specified and directed.
Material and labour for 50 mm thick PCC type D- 2,1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed.
Material and labour for 40mm thick PCC type B- 1,1:2:4 (40mm graded aggregate) as in flooring laid in alternate pannels complete all as specified and directed.
Supply and fixing 15mm dia medium grade GI tubing with all fittings to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
Supply and fixing 20mm dia medium grade GI tubing with all fittings to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, cills sunshades, shelves, lintels etc and cutting chajas for concealed pipe etc and making good, cutting not exceeding 20cm girth complete all as specified & directed by Engineer-in-charge.
Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks ISI marked (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.
Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks white in colour (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.
Supply and fixing 2000 litres capacity rotational moulded polyethylene water storage tanks white in colour ISI marked (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests including PVC P or S trap (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete set in cement concrete complete all as specified and directed.
Supply and fixing in repair 10 litre capacity PVC valveless, syphonic action type,low level flushing cistern white complete with inlet, ball valve float and handle incl bracket complete all as specified and directed.
Material & labour for solid PVC board 16 to 18mm thick interior grade ,white in colour,fixed with screws in almirah shelves,kitchen cabinet including dismantling old existing board complete all as specified & directed.
Material & labour for solid PVC board 25mm thick interior grade, pre laminated one side ,fixed with screws as in shutters of cup boards and kitchen cabinets, including dismantling old existing board complete all as specified & directed .
Supply and fixing 125mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.
Supply and fixing Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain/colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & manufacturer instructions complete all as specified and directed.
Supply and fixing factory made solid PVC moulded door shutter 28 mm to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC Sheet on the front face & 2 mm prelam PVC Sheet on back with partcle board core fixing in frame at site complete all as specified and directed
Supply and fixing in repairs 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed.
Supply and fixing in repairs 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed.
Supply and fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapless complete all as specified and directed.
Supply and fixing mild steel sliding door bolt 250mm long, clip and bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, complete all as specified and directed.
Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
Supply and fixing, PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed.
Supply and fix in repair 110mm bore PVC (SWR) bends any radius, complete all as specified and directed
Supply and fixing in repairs door closer (Aluminium extruded section) hydraulically regulated designation No. 3 universial type sutaible for door shutters of 701 to 850 mm in widtth and of weight between 36 to 60 kg complete all as specified and directed.
Supply and fixing in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Supply and fixing 'D' type, 200mm powder coated aluminium powder coated handles for alauminium doors complete all as specified and directed.
Supply and fixing butt hinges 100mm size, of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.
Supply and fixing bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repairs complete all as specified and directed.
Supply and fixing for 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed.
Supply and fixing in repairs , brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed with 450mm long copper pipes incl all necessary fittings suitable for 15mm bore pipe, complete all as specified and directed.
Supply and fixing 200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified and directed.
Supply and fixing 150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified and directed
Supply and fixing Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.
Supply and fixing continuous (piano) hinges,mild steel, bright finish or electrogalvanised, 30mm width of flap (when open) including necessary screws fixed as in repair complete all as specified and directed.
Supply and fixing bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; chains; hand made sliding bolts; clamps; hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-290 or Gde E-165 complete all as specified and directed.
Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 150 mm complete all as specified and directed.
M&L Slat-glazed stoneware drain pipes laid in trenches & jointed as specfified of 150mm dia with concrete bed to SW pipes including packing under, and haunching against the sides of pipes after they are laid and tested compleate all as specified and directed.
Supply and fixing in repair towel rail 600mm long of stainless steel fixed with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.
M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
Material and labour for 75 mm thick and 750 mm wide Cement Concrete type C-1 1:3:6 (Using 20mm graded stone aggregates) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
Dismantling of textile covering in wall/ ceiling including frame (if any and cover fillets) complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips & providing and fixing new ones complete all as specified and directed.
m/s AR Construction co
M/S Trilok chand sharma
dhiraaj construction company
Gunjan and Gunjan Associates
Standard Const. Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .