GE/S(U)-16/2021-22 DAY TO DAY MAINTENANCE OF INTERNAL ELECTRIFICATION AT COMD CAMP CP COLONY HP COLONY PBS AND HQ NC AREA UNDER GE (SOUTH) UDHAMPUR

Amount

Repairing of unserviceable light point, Fan point, socket point 5A/15A, switches, sockets or regulator, light fixtures any type, any type MCBs, DB's & all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with all replacement of any major part but including small length of wires upto 2.5 sqmm single core (not more than 50 cm), adhesive tape and other connected accessories like screws and washers etc. Work shall also include to check and removal of breakages in service connection/sub main of houses as and when directed. The scope of work shall also include cutting of existing bakelite sheet to accommodate new wiring accessories like switches, sockets, fan regulators etc complete all as spcified and directed. Note: Any major items required to be replaced for this job will be measured and paid under Relevant items of this schedule except item No 31, 39 to 52, 56 and 57.

Note:-(a) Contractors representative/ Engineer will report to JE E/M/Engr-in-charge daily at forenoon and afternoon to collect routine/ urgent works related to internal electric supply till completion of contract. The contractor will ensure availability of manpower equipped with all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job including every type of requisite T&P items to his trades man. All routine/urgent jobs received on job slip will be repaired & got signature of user's and will be deposited to JE E/M with in 24 hrs. In case of any delay in attending the complaint more than 8 hrs after handing over of routine and 2 hrs for urgent works, the contractor shall be liable to pay the penalty as described in penalty clause given here as under.

(b) The penalty shall be applicable to the contractor if the delay is noticed by the Engr-in-Charge more than twelve hrs after handing over works of urgent nature to the contractor. The Engr-in-Charge/JE E/M shall handover the slip containing specification of work to the contractor. The contractor shall attend the job immediately and report to Engr-in-Charge within 12 hrs. The contractor will keep his tradesmen in stand by for attending any routine/ urgent works from the executive. If the nature of job is such that the work cannot be completed within period of 12 hrs then the facts shall be brought to the notice of the GE/Engr-in-charge and the period for the working to the complaint shall be decided by the GE/Engr-in-Charge. If the delay is more then twelve hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs 20 per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 56 of IAFW-2249 and shall be treated as interim condition of the contract and shall enforceable as and delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt. The decision of the Accepting Officer is this regard shall be final and binding.

(c) One Complaints slip to be treated as One Complaint irrespective of No. of Repairs mentioned in the same. (d) Contractor to keep his Electrician ready for Urgent Complaints, During odd hours (0600 Hrs to 0900 Hrs and 1700 Hrs to 2200 Hrs) Other than the Regular complaints during working Hrs (0900 Hrs to 1700 Hrs) (e) Procurement of Security gate passes of the Electrician, will be sole responsibility of the Contractor (f) If the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the govt.

Switch piano flush type SP, one way 6/10 Amps including taking down old one complete all as specified and directed.

Switch piano flush type SP, one way 16/20 Amps including taking down old one complete all as specified and directed.

Switch - socket combination 2 in1 6/10 Amps, flush type including taking down old one complete all as specified and directed.

Switch - socket combination 5A/16 Amps, 5 in 1 including taking down old one complete all as specified and directed.

Socket outlet 2 in 1, 5 pin, 6 Amps including taking down old one complete all as specified and directed.

Socket outlet, 2-in-1, 5 pin, 6 and 16 Amps flush type combined including taking down old one complete all as specified and directed.

Two way switch 6 Amps, 230 volts including taking down old one complete all as specified and directed.

Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block including complete all as specified and directed by Engr-in-Charge.

Angle lamp holder/Batten PVC/ Polycarbonate with back plate suitable for fittings including taking down old one complete all as specified and directed.

Bell push 230 volts, AC including taking down old one complete all as specified and directed.

Call bell ding-dong 230 volts including taking down old one complete all as specified and directed.

Switch modular type, 1 module, 10 Amps one way including taking down old one complete all as specified and directed.

Switch modular type, 1 module, 20 Amps one way including taking down old one complete all as specified and directed.

Socket outlet modular type, 2 module, 3 pin, 6 Amps combined including taking down old one complete all as specified and directed.

Socket outlet, modular type, 2 module, 2-in-1, 6/16A Amps combined including taking down old one complete all as specified and directed.

Two way switch modular type, 1 module, 6 Amps including taking down old one complete all as specified and directed.

Bell push with indicator modular type, 1 module, 6A, including taking down old one complete all as specified and directed.

Fan regulator modular type, 2 module, step type, 100 watts complete all as specified and directed.

Fan electronic dimmers 450W, 250V flush type on the existing laminated sheet complete all as specified and directed.

Switch - socket combination 5 Amps, 5 pin multipurpose with PVC Box, 4 holes complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Switch - socket combination 15 Amps, 6 pin multipurpose with PVC Box, 4 Holes complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make - Indoasian/ Legrand/ Standard

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make - Indoasian /Legrand/Standard

Sheet metal enclousers, TPN Distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make - Indoasian /Legrand /Standard

VTPN MCCB DB- Double Door (Including 63 Amp MCCB) 16 kA (as Incommer) 4 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make - Indoasian/Legrand/ Standard

MCB Single Pole, 240 Volt, B-Series, Raiting 6 to 32 Amps complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand. Note : MCBs reuired to fix in existing DBs

MCB Single Pole and Neutral, 240 Volt, B-Series, Rating 40A as Incoming in MCB SPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

MCB Single Pole and Neutral, 240 Volt, B-Series, Rating 63A as Incoming in MCB SPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

MCB Three Pole and Neutral, 240 Volt,Rating 63A as Incoming in MCB TPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 thick as earth electrode burried directly in ground earth plate not less than 2.25 m deep below normal groung level with top edge of earth plate not less than 1.5 m below ground level connected to and including galvnised steel earth lead wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed inculding providing earth wire protection pipe GI light grade 15 mm dia from earth plate to main switch board/panal, watering pipe 20 mm dia with mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of characoal dust and salt all around the earth plate, earth work in any type of soil, remaning surplus excavated material all as required at site and specified in EP no 3 of SSR part I 1991 or complete all as specified and directed by Engineer-in-Charge.

LED tube light fitting Garnet 20W Batten LED, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in Wipro/HPL

LED tube light fitting Garnet 10W Batten LED, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in HPL/ Wipro

LED tube light fitting Garnet 5W Batten LED, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in HPL/Wipro

LED 10 watt Bulk Head Light energy saving with IP65 with opal diffuser, pressure die cast aluminium housing and making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as per the directions of Engr-in - Charge. Make - Syska or equivalent make in wipro, C&S.

LED Garnet Slim 36 Watt 2x2 LED Panel light with diffused optics (595 x 595 x 65 mm) complete making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as per the directions of Engr-in-Charge. Make - HPL or equivalent make in WIPRO/Havells.

Taking down carefully (copper/aluminum) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper /white washing/colour washing to match with the existing surface complete all as specified and directed.

Point wiring for one light /fan/Bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit (ISI marked) and 1.25 mm thick mild steel terminal boxes concealed in wallsfor fixing of switches/sockets/regulator etc. along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead and connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr-in-Charge.

All as per ser item No 38 but for one light point control by two nos two way switches on independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 38 but for 3 pin 5 Amp Socket outlets point controlled by one switch 5A piano type on Same board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 38 but for 3 pin 5 Amp Socket outlets point controlled by one switch 5A piano type on Independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 38 but for 3 pin 15A socket outlet point controlled by one switch 15A on the independent board with 2.5 sqmm size of copper cable complete all as specified and directed.

Point wiring for one light/fan/Bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit (ISI marked) and 1.25 mm thick mild steel terminal boxes (Modular Type) concealed in wallsfor fixing of modular switches/ sockets/ regulator etc along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead and connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr-in-Charge.

All as per ser item No 43 but for one light point control by two nos two way modular switches on independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 43 but for 3 pin 5 Amp Socket outlets point controlled by one modular switch 6A piano type on Same board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 43 but for 3 pin 5 Amp Socket outlets point controlled by one modular switch 6A piano type on Independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 43 but for 3 pin 15A socket outlet point controlled by one modular switch 16A on the independent board with 2.5 sqmm size of copper cable complete all as specified and directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm drawing through existing surface/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 6 Sqmm as earth lead all as specified including taking down old sub main wire complete all as specified and directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm drawing through existing surface/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 4 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Sub main wiring with four single core PVC insulated with copper conductor cable stranded of size 4 Sqmm drawing through existing surface/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 2.5 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Capacitor 2.5/3.15mfd AC, 415 volt complete all as specified and directed by Engr-in-Charge. Make : Havells/Radson/ Epcos

Supply and laying or Fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheating of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 2 core 10 sqmm nomial cross section in service connection including taking down of old unserviceable service connection from pole to DB complete all as specified and directed by Engr-in-Charge.

Supply and laying or Fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheating of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 2 core 6 sqmm nomial cross section in service connection including taking down of old unserviceable service connection from pole to DB complete all as directed by Engr-in-Charge.

Supply and fixing GI tubing light grade 25 mm dia along the wall/in trenches/in duct/in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc. for holdining of GI pipe alongwith poles complete all as specified and directed.

LED street light fitting 20W Garnet with single piece deep drawn AL housing with side reflectors and acrylic cover including fixing arregement in existing bracket complete all as specified and directed by Engr-in-Charge. Make : Wipro or eqiuvalent in Havells/Syska

Modular plate 1 module including taking down old unserviceable one complete all as specified and directed. Make : Indo asian/ Anchor/ ABB

Modular plate 2 module including taking down old unserviceable one complete all as specified and directed. Make : Indo asian/ Anchor/ ABB

Modular plate 3 module including taking down old unservicebale one complete all as specified and directed. Make : Indo asian/ Anchor/ ABB

Modular plate 4 module including taking down old unserviceable one complete all as specified and directed. Make : Indo asian/ Anchor/ ABB

Modular plate 6 module including taking down old unserviceable one complete all as specified and directed. Make : Indo asian/ Anchor/ ABB

Modular plate 8 module including taking down old unserviceable one complete all as specified and directed. Make : Indo asian/ Anchor/ ABB

LED 12/15/18 Watt Surface Mounting fitting Round/Square type, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/ Havells

LED 18 Watt PLL 4 pin lamp fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - HPL or equivalent make in Wipro/Havells

LED 3/5/7 W Recess mounting Mini Downlight round type fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/ Havells

Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps nicluding taking down of old one complete all as specified and directed by Engr-in-Charge.

LED Candle Light 3/5 W Base Cap E14/E/27 with all necessary fixing arrengement including taking dow old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/Havells /Oshram

Twister/Spiral 5/12/20 watt2 Base Cap B22/E27 light fitting 6500K/2700K (White/ yellow) with all necessary fixing arrengement including taking dow old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/Havells/ Oshram

LED Engagememt 0.5 Watt Safelite Yellow/ Green/Red Base Cap B22 with all necessary fixing arrengement including taking dow old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/Havells/Oshram

MCB Three Pole and Neutral, 230 Volt,Rating 100A as Incoming in MCB TPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

PVC single core 2.5 Sqmm copper conductor complete all as specified and directed.

PVC single core 1.5 Sqmm copper conductor complete all as specified and directed.

PVC three core 2.5 Sqmm copper conductor complete all as specified and directed.

PVC single core 4.00 Sqmm copper conductor complete all as specified and directed.

Electronic driver/adoptor 36/40W, 230 Volt for complete all as specified and directed.

PVC Casing Caping of Size 20/25 mm including all accessories (Nail, Tee, Albow etc). complete all as specified and directed.

PVC Conduit of Size 20/25 mm including all accessories (Nail, Clamps, Albow etc). complete all as specified and directed.

PVC Flexible twisted cable twin core copper conductor cable of size 23/0.0076 complete all as specified and directed.

Gemini Mini GLS E14 decorative wall mounting chrome finish fixture with textured glass alongwith 40W mini GLS lamp and making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Cat Part No LHFOFDC1TZ1C040 of make Havells Or equivalent make in Wipro/HPL

Fan regulator stepped type electronic fan regulator flush type on the existing laminated sheet complete all as specified and directed.

Note : Bidders attention is invited to pages on ser page No 13 & 14 of tender documents.

VARDHMAN INTERNATIONAL

SINGH CONST CO