15th CFC 24-25-Tied-Repair and Re Commissioning of existing Bio Methanation Plant - (Plant Capacity-5 MT) in Tiruchengode Municipality.

Amount

Towards the Charges For FRP WOrk DIGESTER FULL TANK Damage surface mat all removing,Digester tank full surface grinting ,Digester tank soft looping pipe line joints repast work ,Leakage oilpast packing work,Glassroof mat 180gsm work 1×4 coating outside surface tank,* Surface grainmat 450gsm work 1×2 coating outside,* Rasin layer past work , Green past liquid coating work manual chamber top fixing including all labour charges etc complete.,

DIGESTER TANK CIVIL WORK- Digester tank Outside roofing surface damage concrete removing & replacement full concrete work , Full tank side beating crack pasting work ,Inside roofing surface joining crack work ,Tank outer surface leakage packing work ,Digester tank full chemical past packing work ,Water leakage packing work etc complete.,

DIGESTER SUPPORT CENTRE SHOFT WORK & INLET AND OUTLET PIPELINE WORK,* Side bottom support soft checking Inside tank centre gear soft work ,Cowton waste collecting chamber pipe line work Cowton waste inlet pipe line cleaning, Flowing waste pipe line damage checking and changing ,Digest Old waste outlet pipe line cleaning , Old silory mixing & removin ,Recycling tank inside process ,Cowdean wast insite tank cleaning, Primary old selary removing work , Death bacteria activating work, Unwanted waste removing work, Overflow pipe line cleaning in digester Digester tank inside Outlet pipe cleaning Side bottom support soft checking ,etc complete,.

GENERATER ENGINE WORK , Engine full cleaning & service , Radiator full check and cleaning ,Power distributor & power coil new fixed 14w40 engine oil 15 litter Dynamo cleaning & Self motor service ignition coil service , speed relay control Coolant oil 2 litter , engine head and spark plug 4num Electric drives wire kit checking, Power cable missing spears changing , All wiring kit checking and change, Battery Looping cable etc complete.,

GATE VALVES & PIPELINE CHECKING , * 8num gate valves Feeding hose pipe line , Recycle motor hose pipeline ,Selary pipe line ,Water pipe line Mixer house pipe line ,Digester tank air food valve etc complete.,

BLOWER MOTOR WORK- Blower motor service ,Blower box service , Oil change ,Bearing change,Blower inlet & outlet pipe line cleaning etc complete.,

SCRUBBER UNIT CHECKING -Squaring tank full cleaning, Carbon removing tank cleaning ,Watter removing tank cleaning , Replacement of Ayan material Compressor tank cleaning , Curing water tap pipe line check & cleaning , Monster tap & water removing tap cleaning etc complete.,

Supply ,delivery and erection of Bio-Gas Storage Balloon 30 cum Capacity,Heavy Biogas Balloon volume of - 25m3,Shape- Cylindrical ,Type- Single membrane Fabric- Both side PVC coated 3-layer Premium quality, 950gsm ( 0.10mm Thk), UV Protected, Inlet and Outlet- 6inch (MS) material Max pressure capacity 10-15mbar This can be used as a gas holder, Suitable atmospheric temperature at Animoor Bio gas Plant in Tiruchengode Municipality.

Supply ,delivery and erection of Bio-Shredding Machine Motor Capacity 7.50 HP Power Speed,Motor RPM - 1440,Voltage - 415,Type - B belt drive, Automatic Grade -Semi ,Capacity-1000 kg/hr,Waste Output size - 4'' inch, Output Cutting Size - 5 - 10 mm, Material-Inside all SS Material, Outer side MS Material ,INPUT WAST CHICKEN WASTE & VEGETABLE WASTE AND ALL ORGANIC WASTE etc complete.,

Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply and other Pipe lines. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Cement concrete 1:4:8 mix ( One cement four sand and eight aggregate) using 40mm ISSmetal including mixing, laying, consolidating curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification.

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using M.S Sheets of size 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification as per TNDSS No.30&86 (For Drain,Deck slab & Retainingwall)

Supplying and laying Rubberised interlocking Paver block(Rubber Moulded Hydraulic Pressed Paver Block) M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Plain Cement Concrete 1:3:6 (one cement, three fine aggregates and six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supply and delivery of Following GI Pipes and Specials With relevant IS Standards and conforming to IS 1239 / PART I /90 Including all labour charges etc complete as per standard specifications.

40mm dia GI Pipe

40mm dia GI Elbow

50mm dia UPVC Coupling

50mm dia UPVC Bend

40mm dia Brass Gate Valve

40mm dia GI Hex Nipple

150mm dia MS Flange set

150mm dia Clampset

Painting two coats with ready mixed plastic emulsion of first class quality paint and of approved colour over a priming coat including thorough scrapping clean removel of dirt, including cost of all materials and all labour charge etc complete as per standard specification.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply delivery and fixing of 5HP Sludge Dewatering Motor 18 m Head, Discharge Outletsize 100mm,5 HP 3700CW 65 MM RS 75300 LP /lubi lgp 2535 / 5 hp 3 ph 50 mm with grinder outlet 300 metres head with Good Condition and Approved quality from Govt to the site loading and Fixing Charge etc complete.,

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

add GST 18%

M. BOOPATHY (BID ID -1260478)