CONSTRUCTION OF KITCHEN SHED TO PANCHAYAT UNION PRIMARY SCHOOL AT BICKOL OF ADIGARATTY TOWN PANCHAYAT IN COONOOR BLOCK

Amount

CONSTRUCTION OF KITCHEN SHED TO PANCHAYAT UNION PRIMARY SCHOOL AT BICKOL OF ADIGARATTY TOWN PANCHAYAT IN COONOOR BLOCK, THE NILGIRIS DISTRICT UNDER GENERAL FUND FOR THE YEAR 2023-2024 PACKAGE NO. P01

Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15CM thick well rammed and consolidated and depositing the surplus earth in all places shown by the departmental officers with initial lead and lifts etc including levelling the sites complete complying with standard specifications and as directed in hard stiff clay, stiff black cotton soil, hard red earth, shales, murrams, gravel, stoney earth and earth muds with 50%

Cement concrete 1:4:8 (one cement Four sand and Eight hard broken stone) using 40mm gauge hand broken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15cm, thick, compacting etc., complete complying with standard specification and as directed.

Brick work in cement mortar 1:5 (One cement five sand) using country bricks ground molded of size 23x11x7 cm for the following including curing etc. complete complying with standard specification.

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29m height for plane surface in all floors with Cross bracings using mild steel sheets of size 90cms x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mmx3mm for boarding laid over silver oak (Country wood) Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification and as directed for the following items.

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29m height for plane surface in all floors with Cross bracings using mild steel sheets of size 90cms x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mmx3mm for boarding laid over silver oak (Country wood) Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification and as directed for the following items.

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29m height for plane surface in all floors with Cross bracings using mild steel sheets of size 90cms x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mmx3mm for boarding laid over silver oak (Country wood) Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification and as directed for the following items.

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29m height for plane surface in all floors with Cross bracings using mild steel sheets of size 90cms x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mmx3mm for boarding laid over silver oak (Country wood) Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification and as directed for the following items.

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification (MS rods or RTS bars will be supplied departmentally at section stores and cost will be recovered at issue rate) The binding wire shall be supplied by the contractor.

Reinforced cement concrete 1:1.5:3 mix suing 20mm gauge hand broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or Roof Slabs wherever necessary and bearing surfaces of walls sides and bottom of the slabs beams etc shall be finished smooth with cement mortar 1:3 (one cement three sand) 12mm thick and with Kraft paper without claiming extra etc. as directed by the departmental Officers complete complying with standard specification. The rate is to include vibration charges

Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia canopy slab, staircase waist slab, landing slab, etc. with cement mortar 1:3 (One Cement and three sand) 10mm thick including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades and staircase steps, landing slabs, etc complete complying with standard specification.

Plastering with Cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including curing etc. complete complying with standard specification and as directed.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site

Distembering using best quality and approved variety of colour pigments including cost of all materials, brushes and scaffolding charges, etc. complete complying with standard specification, (Stainer and colour solution should not be used)

Ultima Exterior Emulsion Paint using best quality and approved variety of colour pigments including cost of all materials, brushes and scaffolding charges, etc. complete complying with standard specification, (Stainer and colour solution should not be used)

Painting two coats using New Iron work good enamel paints including of all cost and conveyance of all materials to site for labour charges etc., complete

Supply of Steel Door of Size 0.90 x 2.10 m

Supply of Steel Window of Size 1.20 x 1.30 m

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

V RAVIKUMAR